Commit bfd8d977 authored by Philippe Reynes's avatar Philippe Reynes Committed by David S. Miller

net: nicvf: use new api ethtool_{get|set}_link_ksettings

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: default avatarPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 52986a2f
......@@ -116,33 +116,34 @@ static const unsigned int nicvf_n_hw_stats = ARRAY_SIZE(nicvf_hw_stats);
static const unsigned int nicvf_n_drv_stats = ARRAY_SIZE(nicvf_drv_stats);
static const unsigned int nicvf_n_queue_stats = ARRAY_SIZE(nicvf_queue_stats);
static int nicvf_get_settings(struct net_device *netdev,
struct ethtool_cmd *cmd)
static int nicvf_get_link_ksettings(struct net_device *netdev,
struct ethtool_link_ksettings *cmd)
{
struct nicvf *nic = netdev_priv(netdev);
u32 supported, advertising;
cmd->supported = 0;
cmd->transceiver = XCVR_EXTERNAL;
supported = 0;
advertising = 0;
if (!nic->link_up) {
cmd->duplex = DUPLEX_UNKNOWN;
ethtool_cmd_speed_set(cmd, SPEED_UNKNOWN);
cmd->base.duplex = DUPLEX_UNKNOWN;
cmd->base.speed = SPEED_UNKNOWN;
return 0;
}
switch (nic->speed) {
case SPEED_1000:
cmd->port = PORT_MII | PORT_TP;
cmd->autoneg = AUTONEG_ENABLE;
cmd->supported |= SUPPORTED_MII | SUPPORTED_TP;
cmd->supported |= SUPPORTED_1000baseT_Full |
cmd->base.port = PORT_MII | PORT_TP;
cmd->base.autoneg = AUTONEG_ENABLE;
supported |= SUPPORTED_MII | SUPPORTED_TP;
supported |= SUPPORTED_1000baseT_Full |
SUPPORTED_1000baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_10baseT_Half;
cmd->supported |= SUPPORTED_Autoneg;
cmd->advertising |= ADVERTISED_1000baseT_Full |
supported |= SUPPORTED_Autoneg;
advertising |= ADVERTISED_1000baseT_Full |
ADVERTISED_1000baseT_Half |
ADVERTISED_100baseT_Full |
ADVERTISED_100baseT_Half |
......@@ -151,24 +152,29 @@ static int nicvf_get_settings(struct net_device *netdev,
break;
case SPEED_10000:
if (nic->mac_type == BGX_MODE_RXAUI) {
cmd->port = PORT_TP;
cmd->supported |= SUPPORTED_TP;
cmd->base.port = PORT_TP;
supported |= SUPPORTED_TP;
} else {
cmd->port = PORT_FIBRE;
cmd->supported |= SUPPORTED_FIBRE;
cmd->base.port = PORT_FIBRE;
supported |= SUPPORTED_FIBRE;
}
cmd->autoneg = AUTONEG_DISABLE;
cmd->supported |= SUPPORTED_10000baseT_Full;
cmd->base.autoneg = AUTONEG_DISABLE;
supported |= SUPPORTED_10000baseT_Full;
break;
case SPEED_40000:
cmd->port = PORT_FIBRE;
cmd->autoneg = AUTONEG_DISABLE;
cmd->supported |= SUPPORTED_FIBRE;
cmd->supported |= SUPPORTED_40000baseCR4_Full;
cmd->base.port = PORT_FIBRE;
cmd->base.autoneg = AUTONEG_DISABLE;
supported |= SUPPORTED_FIBRE;
supported |= SUPPORTED_40000baseCR4_Full;
break;
}
cmd->duplex = nic->duplex;
ethtool_cmd_speed_set(cmd, nic->speed);
cmd->base.duplex = nic->duplex;
cmd->base.speed = nic->speed;
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
supported);
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
advertising);
return 0;
}
......@@ -770,7 +776,6 @@ static int nicvf_set_pauseparam(struct net_device *dev,
}
static const struct ethtool_ops nicvf_ethtool_ops = {
.get_settings = nicvf_get_settings,
.get_link = nicvf_get_link,
.get_drvinfo = nicvf_get_drvinfo,
.get_msglevel = nicvf_get_msglevel,
......@@ -793,6 +798,7 @@ static const struct ethtool_ops nicvf_ethtool_ops = {
.get_pauseparam = nicvf_get_pauseparam,
.set_pauseparam = nicvf_set_pauseparam,
.get_ts_info = ethtool_op_get_ts_info,
.get_link_ksettings = nicvf_get_link_ksettings,
};
void nicvf_set_ethtool_ops(struct net_device *netdev)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment