Commit bff73156 authored by Donald Dutile's avatar Donald Dutile Committed by Bjorn Helgaas

PCI: Provide method to reduce the number of total VFs supported

Some implementations of SRIOV provide a capability structure
value of TotalVFs that is greater than what the software can support.
Provide a method to reduce the capability structure reported value
to the value the driver can support.
This ensures sysfs reports the current capability of the system,
hardware and software.
Example for its use: igb & ixgbe -- report 8 & 64 as TotalVFs,
but drivers only support 7 & 63 maximum.
Signed-off-by: default avatarDonald Dutile <ddutile@redhat.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
parent 1789382a
......@@ -735,3 +735,50 @@ int pci_num_vf(struct pci_dev *dev)
return dev->sriov->nr_virtfn;
}
EXPORT_SYMBOL_GPL(pci_num_vf);
/**
* pci_sriov_set_totalvfs -- reduce the TotalVFs available
* @dev: the PCI PF device
* numvfs: number that should be used for TotalVFs supported
*
* Should be called from PF driver's probe routine with
* device's mutex held.
*
* Returns 0 if PF is an SRIOV-capable device and
* value of numvfs valid. If not a PF with VFS, return -EINVAL;
* if VFs already enabled, return -EBUSY.
*/
int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs)
{
if (!dev || !dev->is_physfn || (numvfs > dev->sriov->total))
return -EINVAL;
/* Shouldn't change if VFs already enabled */
if (dev->sriov->ctrl & PCI_SRIOV_CTRL_VFE)
return -EBUSY;
else
dev->sriov->drvttl = numvfs;
return 0;
}
EXPORT_SYMBOL_GPL(pci_sriov_set_totalvfs);
/**
* pci_sriov_get_totalvfs -- get total VFs supported on this devic3
* @dev: the PCI PF device
*
* For a PCIe device with SRIOV support, return the PCIe
* SRIOV capability value of TotalVFs or the value of drvttl
* if the driver reduced it. Otherwise, -EINVAL.
*/
int pci_sriov_get_totalvfs(struct pci_dev *dev)
{
if (!dev || !dev->is_physfn)
return -EINVAL;
if (dev->sriov->drvttl)
return dev->sriov->drvttl;
else
return dev->sriov->total;
}
EXPORT_SYMBOL_GPL(pci_sriov_get_totalvfs);
......@@ -411,7 +411,7 @@ static ssize_t sriov_totalvfs_show(struct device *dev,
{
struct pci_dev *pdev = to_pci_dev(dev);
return sprintf(buf, "%u\n", pdev->sriov->total);
return sprintf(buf, "%u\n", pci_sriov_get_totalvfs(pdev));
}
......@@ -452,7 +452,7 @@ static ssize_t sriov_numvfs_store(struct device *dev,
}
/* if enabling vf's ... */
total = pdev->sriov->total;
total = pci_sriov_get_totalvfs(pdev);
/* Requested VFs to enable < totalvfs and none enabled already */
if ((num_vfs > 0) && (num_vfs <= total)) {
if (pdev->sriov->nr_virtfn == 0) {
......
......@@ -240,6 +240,7 @@ struct pci_sriov {
u16 stride; /* following VF stride */
u32 pgsz; /* page size for BAR alignment */
u8 link; /* Function Dependency Link */
u16 drvttl; /* max num VFs driver supports */
struct pci_dev *dev; /* lowest numbered PF */
struct pci_dev *self; /* this PF */
struct mutex lock; /* lock for VF bus */
......
......@@ -1611,6 +1611,8 @@ extern int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn);
extern void pci_disable_sriov(struct pci_dev *dev);
extern irqreturn_t pci_sriov_migration(struct pci_dev *dev);
extern int pci_num_vf(struct pci_dev *dev);
extern int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs);
extern int pci_sriov_get_totalvfs(struct pci_dev *dev);
#else
static inline int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn)
{
......@@ -1627,6 +1629,14 @@ static inline int pci_num_vf(struct pci_dev *dev)
{
return 0;
}
static inline int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs)
{
return 0;
}
static inline int pci_sriov_get_totalvfs(struct pci_dev *dev)
{
return 0;
}
#endif
#if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment