net: phy: micrel: remove the use of .ack_interrupt()

In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.

This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.

Cc: Divya Koppera <Divya.Koppera@microchip.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/phy/micrel.c

@@ -162,7 +162,7 @@ static int kszphy_ack_interrupt(struct phy_device *phydev)
 static int kszphy_config_intr(struct phy_device *phydev)
 {
 	const struct kszphy_type *type = phydev->drv->driver_data;
-	int temp;
+	int temp, err;
 	u16 mask;
 
 	if (type && type->interrupt_level_mask)
@@ -178,12 +178,23 @@ static int kszphy_config_intr(struct phy_device *phydev)
 	phy_write(phydev, MII_KSZPHY_CTRL, temp);
 
 	/* enable / disable interrupts */
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = kszphy_ack_interrupt(phydev);
+		if (err)
+			return err;
+
 		temp = KSZPHY_INTCS_ALL;
-	else
+		err = phy_write(phydev, MII_KSZPHY_INTCS, temp);
+	} else {
 		temp = 0;
+		err = phy_write(phydev, MII_KSZPHY_INTCS, temp);
+		if (err)
+			return err;
+
+		err = kszphy_ack_interrupt(phydev);
+	}
 
-	return phy_write(phydev, MII_KSZPHY_INTCS, temp);
+	return err;
 }
 
 static irqreturn_t kszphy_handle_interrupt(struct phy_device *phydev)
@@ -1182,7 +1193,6 @@ static struct phy_driver ksphy_driver[] = {
 	/* PHY_BASIC_FEATURES */
 	.driver_data	= &ks8737_type,
 	.config_init	= kszphy_config_init,
-	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.suspend	= genphy_suspend,
@@ -1195,7 +1205,6 @@ static struct phy_driver ksphy_driver[] = {
 	.driver_data	= &ksz8021_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
-	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.get_sset_count = kszphy_get_sset_count,
@@ -1211,7 +1220,6 @@ static struct phy_driver ksphy_driver[] = {
 	.driver_data	= &ksz8021_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
-	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.get_sset_count = kszphy_get_sset_count,
@@ -1228,7 +1236,6 @@ static struct phy_driver ksphy_driver[] = {
 	.probe		= kszphy_probe,
 	.config_init	= ksz8041_config_init,
 	.config_aneg	= ksz8041_config_aneg,
-	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.get_sset_count = kszphy_get_sset_count,
@@ -1244,7 +1251,6 @@ static struct phy_driver ksphy_driver[] = {
 	.driver_data	= &ksz8041_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
-	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.get_sset_count = kszphy_get_sset_count,
@@ -1258,7 +1264,6 @@ static struct phy_driver ksphy_driver[] = {
 	.driver_data	= &ksz8051_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
-	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.get_sset_count = kszphy_get_sset_count,
@@ -1275,7 +1280,6 @@ static struct phy_driver ksphy_driver[] = {
 	.driver_data	= &ksz8041_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
-	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.get_sset_count = kszphy_get_sset_count,
@@ -1291,7 +1295,6 @@ static struct phy_driver ksphy_driver[] = {
 	.driver_data	= &ksz8081_type,
 	.probe		= kszphy_probe,
 	.config_init	= ksz8081_config_init,
-	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.get_sset_count = kszphy_get_sset_count,
@@ -1305,7 +1308,6 @@ static struct phy_driver ksphy_driver[] = {
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	/* PHY_BASIC_FEATURES */
 	.config_init	= ksz8061_config_init,
-	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.suspend	= genphy_suspend,
@@ -1319,7 +1321,6 @@ static struct phy_driver ksphy_driver[] = {
 	.probe		= kszphy_probe,
 	.get_features	= ksz9031_get_features,
 	.config_init	= ksz9021_config_init,
-	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.get_sset_count = kszphy_get_sset_count,
@@ -1339,7 +1340,6 @@ static struct phy_driver ksphy_driver[] = {
 	.config_init	= ksz9031_config_init,
 	.soft_reset	= genphy_soft_reset,
 	.read_status	= ksz9031_read_status,
-	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.get_sset_count = kszphy_get_sset_count,
@@ -1369,7 +1369,6 @@ static struct phy_driver ksphy_driver[] = {
 	.probe		= kszphy_probe,
 	.config_init	= ksz9131_config_init,
 	.read_status	= genphy_read_status,
-	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.get_sset_count = kszphy_get_sset_count,