drm/amd/display: setup system context in dm_init

[why]
display S/G mode fails in Renoir

[how]
Setup system context in dm init.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c

@@ -931,12 +931,67 @@ static void amdgpu_check_debugfs_connector_property_change(struct amdgpu_device
 	}
 }
 
+static void mmhub_read_system_context(struct amdgpu_device *adev, struct dc_phy_addr_space_config *pa_config)
+{
+	uint64_t pt_base;
+	uint32_t logical_addr_low;
+	uint32_t logical_addr_high;
+	uint32_t agp_base, agp_bot, agp_top;
+	PHYSICAL_ADDRESS_LOC page_table_start, page_table_end, page_table_base;
+
+	logical_addr_low  = min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18;
+	pt_base = amdgpu_gmc_pd_addr(adev->gart.bo);
+
+	if (adev->apu_flags & AMD_APU_IS_RAVEN2)
+		/*
+		 * Raven2 has a HW issue that it is unable to use the vram which
+		 * is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR. So here is the
+		 * workaround that increase system aperture high address (add 1)
+		 * to get rid of the VM fault and hardware hang.
+		 */
+		logical_addr_high = max((adev->gmc.fb_end >> 18) + 0x1, adev->gmc.agp_end >> 18);
+	else
+		logical_addr_high = max(adev->gmc.fb_end, adev->gmc.agp_end) >> 18;
+
+	agp_base = 0;
+	agp_bot = adev->gmc.agp_start >> 24;
+	agp_top = adev->gmc.agp_end >> 24;
+
+
+	page_table_start.high_part = (u32)(adev->gmc.gart_start >> 44) & 0xF;
+	page_table_start.low_part = (u32)(adev->gmc.gart_start >> 12);
+	page_table_end.high_part = (u32)(adev->gmc.gart_end >> 44) & 0xF;
+	page_table_end.low_part = (u32)(adev->gmc.gart_end >> 12);
+	page_table_base.high_part = upper_32_bits(pt_base) & 0xF;
+	page_table_base.low_part = lower_32_bits(pt_base);
+
+	pa_config->system_aperture.start_addr = (uint64_t)logical_addr_low << 18;
+	pa_config->system_aperture.end_addr = (uint64_t)logical_addr_high << 18;
+
+	pa_config->system_aperture.agp_base = (uint64_t)agp_base << 24 ;
+	pa_config->system_aperture.agp_bot = (uint64_t)agp_bot << 24;
+	pa_config->system_aperture.agp_top = (uint64_t)agp_top << 24;
+
+	pa_config->system_aperture.fb_base = adev->gmc.fb_start;
+	pa_config->system_aperture.fb_offset = adev->gmc.aper_base;
+	pa_config->system_aperture.fb_top = adev->gmc.fb_end;
+
+	pa_config->gart_config.page_table_start_addr = page_table_start.quad_part << 12;
+	pa_config->gart_config.page_table_end_addr = page_table_end.quad_part << 12;
+	pa_config->gart_config.page_table_base_addr = page_table_base.quad_part;
+
+	pa_config->is_hvm_enabled = 0;
+
+}
+
+
 static int amdgpu_dm_init(struct amdgpu_device *adev)
 {
 	struct dc_init_data init_data;
 #ifdef CONFIG_DRM_AMD_DC_HDCP
 	struct dc_callback_init init_params;
 #endif
+	struct dc_phy_addr_space_config pa_config;
 	int r;
 
 	adev->dm.ddev = adev_to_drm(adev);
@@ -1042,6 +1097,11 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
 
 	dc_hardware_init(adev->dm.dc);
 
+	mmhub_read_system_context(adev, &pa_config);
+
+	// Call the DC init_memory func
+	dc_setup_system_context(adev->dm.dc, &pa_config);
+
 	adev->dm.freesync_module = mod_freesync_create(adev->dm.dc);
 	if (!adev->dm.freesync_module) {
 		DRM_ERROR(
@@ -1088,6 +1148,7 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
 		goto error;
 	}
 
+
 	DRM_DEBUG_DRIVER("KMS initialized.\n");
 
 	return 0;