Commit c140d879 authored by David Howells's avatar David Howells

Disintegrate asm/system.h for IA64

Disintegrate asm/system.h for IA64.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
Acked-by: default avatarTony Luck <tony.luck@intel.com>
cc: linux-ia64@vger.kernel.org
parent 8335896b
......@@ -22,7 +22,7 @@
#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/system.h>
#include <asm/setup.h>
void __init
dig_setup (char **cmdline_p)
......
......@@ -43,7 +43,6 @@
#include <asm/io.h>
#include <asm/page.h> /* PAGE_OFFSET */
#include <asm/dma.h>
#include <asm/system.h> /* wmb() */
#include <asm/acpi-ext.h>
......
......@@ -20,7 +20,6 @@ struct task_struct; /* forward declaration for elf.h */
#include <asm/pal.h>
#include <asm/pgtable.h>
#include <asm/sal.h>
#include <asm/system.h>
#include "ssc.h"
......
......@@ -13,6 +13,7 @@
#include <asm/io.h>
#include <asm/pal.h>
#include <asm/sal.h>
#include <asm/setup.h>
#include "ssc.h"
......
......@@ -20,7 +20,6 @@
#include <linux/skbuff.h>
#include <linux/notifier.h>
#include <linux/bitops.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <asm/hpsim.h>
......
......@@ -32,7 +32,6 @@
#include <linux/init.h>
#include <linux/numa.h>
#include <asm/system.h>
#include <asm/numa.h>
#define COMPILER_DEPENDENT_INT64 long
......
......@@ -15,7 +15,6 @@
#include <linux/types.h>
#include <asm/intrinsics.h>
#include <asm/system.h>
#define ATOMIC_INIT(i) ((atomic_t) { (i) })
......
......@@ -8,4 +8,6 @@
#define AT_SYSINFO 32
#define AT_SYSINFO_EHDR 33
#define AT_VECTOR_SIZE_ARCH 2 /* entries in ARCH_DLINFO */
#endif /* _ASM_IA64_AUXVEC_H */
/*
* Memory barrier definitions. This is based on information published
* in the Processor Abstraction Layer and the System Abstraction Layer
* manual.
*
* Copyright (C) 1998-2003 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
* Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
* Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
*/
#ifndef _ASM_IA64_BARRIER_H
#define _ASM_IA64_BARRIER_H
#include <linux/compiler.h>
/*
* Macros to force memory ordering. In these descriptions, "previous"
* and "subsequent" refer to program order; "visible" means that all
* architecturally visible effects of a memory access have occurred
* (at a minimum, this means the memory has been read or written).
*
* wmb(): Guarantees that all preceding stores to memory-
* like regions are visible before any subsequent
* stores and that all following stores will be
* visible only after all previous stores.
* rmb(): Like wmb(), but for reads.
* mb(): wmb()/rmb() combo, i.e., all previous memory
* accesses are visible before all subsequent
* accesses and vice versa. This is also known as
* a "fence."
*
* Note: "mb()" and its variants cannot be used as a fence to order
* accesses to memory mapped I/O registers. For that, mf.a needs to
* be used. However, we don't want to always use mf.a because (a)
* it's (presumably) much slower than mf and (b) mf.a is supported for
* sequential memory pages only.
*/
#define mb() ia64_mf()
#define rmb() mb()
#define wmb() mb()
#define read_barrier_depends() do { } while(0)
#ifdef CONFIG_SMP
# define smp_mb() mb()
# define smp_rmb() rmb()
# define smp_wmb() wmb()
# define smp_read_barrier_depends() read_barrier_depends()
#else
# define smp_mb() barrier()
# define smp_rmb() barrier()
# define smp_wmb() barrier()
# define smp_read_barrier_depends() do { } while(0)
#endif
/*
* XXX check on this ---I suspect what Linus really wants here is
* acquire vs release semantics but we can't discuss this stuff with
* Linus just yet. Grrr...
*/
#define set_mb(var, value) do { (var) = (value); mb(); } while (0)
/*
* The group barrier in front of the rsm & ssm are necessary to ensure
* that none of the previous instructions in the same group are
* affected by the rsm/ssm.
*/
#endif /* _ASM_IA64_BARRIER_H */
/*
* Process execution defines.
*
* Copyright (C) 1998-2003 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
* Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
* Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
*/
#ifndef _ASM_IA64_EXEC_H
#define _ASM_IA64_EXEC_H
#define arch_align_stack(x) (x)
#endif /* _ASM_IA64_EXEC_H */
......@@ -4,7 +4,6 @@
#include <linux/futex.h>
#include <linux/uaccess.h>
#include <asm/errno.h>
#include <asm/system.h>
#define __futex_atomic_op1(insn, ret, oldval, uaddr, oparg) \
do { \
......
......@@ -71,7 +71,6 @@ extern unsigned int num_io_spaces;
#include <asm/intrinsics.h>
#include <asm/machvec.h>
#include <asm/page.h>
#include <asm/system.h>
#include <asm-generic/iomap.h>
/*
......
......@@ -10,6 +10,8 @@
#ifndef _ASM_IA64_IRQFLAGS_H
#define _ASM_IA64_IRQFLAGS_H
#include <asm/pal.h>
#ifdef CONFIG_IA64_DEBUG_IRQ
extern unsigned long last_cli_ip;
static inline void arch_maybe_save_ip(unsigned long flags)
......
#ifndef _ASM_IA64_KEXEC_H
#define _ASM_IA64_KEXEC_H
#include <asm/setup.h>
/* Maximum physical address we can use pages from */
#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
......
......@@ -15,6 +15,8 @@
#ifndef _ASM_IA64_MCA_ASM_H
#define _ASM_IA64_MCA_ASM_H
#include <asm/percpu.h>
#define PSR_IC 13
#define PSR_I 14
#define PSR_DT 17
......
......@@ -221,4 +221,14 @@ get_order (unsigned long size)
(((current->personality & READ_IMPLIES_EXEC) != 0) \
? VM_EXEC : 0))
#define GATE_ADDR RGN_BASE(RGN_GATE)
/*
* 0xa000000000000000+2*PERCPU_PAGE_SIZE
* - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page)
*/
#define KERNEL_START (GATE_ADDR+__IA64_UL_CONST(0x100000000))
#define PERCPU_ADDR (-PERCPU_PAGE_SIZE)
#define LOAD_OFFSET (KERNEL_START - KERNEL_TR_PAGE_SIZE)
#endif /* _ASM_IA64_PAGE_H */
......@@ -11,6 +11,14 @@
#include <asm/scatterlist.h>
#include <asm/hw_irq.h>
struct pci_vector_struct {
__u16 segment; /* PCI Segment number */
__u16 bus; /* PCI Bus number */
__u32 pci_id; /* ACPI split 16 bits device, 16 bits function (see section 6.1.1) */
__u8 pin; /* PCI PIN (0 = A, 1 = B, 2 = C, 3 = D) */
__u32 irq; /* IRQ assigned */
};
/*
* Can be used to override the logic in pci_scan_bus for skipping already-configured bus
* numbers - to be used for buggy BIOSes or architectures with incomplete PCI setup by the
......
......@@ -16,7 +16,6 @@
#include <asm/mman.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/types.h>
#define IA64_MAX_PHYS_BITS 50 /* max. number of physical address bits (architected) */
......
......@@ -19,6 +19,9 @@
#include <asm/ptrace.h>
#include <asm/ustack.h>
#define __ARCH_WANT_UNLOCKED_CTXSW
#define ARCH_HAS_PREFETCH_SWITCH_STACK
#define IA64_NUM_PHYS_STACK_REG 96
#define IA64_NUM_DBG_REGS 8
......@@ -720,6 +723,11 @@ extern unsigned long boot_option_idle_override;
enum idle_boot_override {IDLE_NO_OVERRIDE=0, IDLE_HALT, IDLE_FORCE_MWAIT,
IDLE_NOMWAIT, IDLE_POLL};
void cpu_idle_wait(void);
void default_idle(void);
#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_IA64_PROCESSOR_H */
......@@ -40,7 +40,6 @@
#include <linux/efi.h>
#include <asm/pal.h>
#include <asm/system.h>
#include <asm/fpu.h>
extern spinlock_t sal_lock;
......
......@@ -3,4 +3,22 @@
#define COMMAND_LINE_SIZE 2048
extern struct ia64_boot_param {
__u64 command_line; /* physical address of command line arguments */
__u64 efi_systab; /* physical address of EFI system table */
__u64 efi_memmap; /* physical address of EFI memory map */
__u64 efi_memmap_size; /* size of EFI memory map */
__u64 efi_memdesc_size; /* size of an EFI memory map descriptor */
__u32 efi_memdesc_version; /* memory descriptor version */
struct {
__u16 num_cols; /* number of columns on console output device */
__u16 num_rows; /* number of rows on console output device */
__u16 orig_x; /* cursor's x position */
__u16 orig_y; /* cursor's y position */
} console_info;
__u64 fpswa; /* physical address of the fpswa interface */
__u64 initrd_start;
__u64 initrd_size;
} *ia64_boot_param;
#endif
......@@ -10,7 +10,6 @@
#include <linux/cache.h>
#include <asm/percpu.h>
#include <asm/system.h>
/*
......
......@@ -15,7 +15,6 @@
#include <linux/atomic.h>
#include <asm/intrinsics.h>
#include <asm/system.h>
#define arch_spin_lock_init(x) ((x)->lock = 0)
......
/*
* Low-level task switching. This is based on information published in
* the Processor Abstraction Layer and the System Abstraction Layer
* manual.
*
* Copyright (C) 1998-2003 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
* Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
* Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
*/
#ifndef _ASM_IA64_SWITCH_TO_H
#define _ASM_IA64_SWITCH_TO_H
#include <linux/percpu.h>
struct task_struct;
/*
* Context switch from one thread to another. If the two threads have
* different address spaces, schedule() has already taken care of
* switching to the new address space by calling switch_mm().
*
* Disabling access to the fph partition and the debug-register
* context switch MUST be done before calling ia64_switch_to() since a
* newly created thread returns directly to
* ia64_ret_from_syscall_clear_r8.
*/
extern struct task_struct *ia64_switch_to (void *next_task);
extern void ia64_save_extra (struct task_struct *task);
extern void ia64_load_extra (struct task_struct *task);
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
extern void ia64_account_on_switch (struct task_struct *prev, struct task_struct *next);
# define IA64_ACCOUNT_ON_SWITCH(p,n) ia64_account_on_switch(p,n)
#else
# define IA64_ACCOUNT_ON_SWITCH(p,n)
#endif
#ifdef CONFIG_PERFMON
DECLARE_PER_CPU(unsigned long, pfm_syst_info);
# define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1)
#else
# define PERFMON_IS_SYSWIDE() (0)
#endif
#define IA64_HAS_EXTRA_STATE(t) \
((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID) \
|| PERFMON_IS_SYSWIDE())
#define __switch_to(prev,next,last) do { \
IA64_ACCOUNT_ON_SWITCH(prev, next); \
if (IA64_HAS_EXTRA_STATE(prev)) \
ia64_save_extra(prev); \
if (IA64_HAS_EXTRA_STATE(next)) \
ia64_load_extra(next); \
ia64_psr(task_pt_regs(next))->dfh = !ia64_is_local_fpu_owner(next); \
(last) = ia64_switch_to((next)); \
} while (0)
#ifdef CONFIG_SMP
/*
* In the SMP case, we save the fph state when context-switching away from a thread that
* modified fph. This way, when the thread gets scheduled on another CPU, the CPU can
* pick up the state from task->thread.fph, avoiding the complication of having to fetch
* the latest fph state from another CPU. In other words: eager save, lazy restore.
*/
# define switch_to(prev,next,last) do { \
if (ia64_psr(task_pt_regs(prev))->mfh && ia64_is_local_fpu_owner(prev)) { \
ia64_psr(task_pt_regs(prev))->mfh = 0; \
(prev)->thread.flags |= IA64_THREAD_FPH_VALID; \
__ia64_save_fpu((prev)->thread.fph); \
} \
__switch_to(prev, next, last); \
/* "next" in old context is "current" in new context */ \
if (unlikely((current->thread.flags & IA64_THREAD_MIGRATION) && \
(task_cpu(current) != \
task_thread_info(current)->last_cpu))) { \
platform_migrate(current); \
task_thread_info(current)->last_cpu = task_cpu(current); \
} \
} while (0)
#else
# define switch_to(prev,next,last) __switch_to(prev, next, last)
#endif
#endif /* _ASM_IA64_SWITCH_TO_H */
#ifndef _ASM_IA64_SYSTEM_H
#define _ASM_IA64_SYSTEM_H
/*
* System defines. Note that this is included both from .c and .S
* files, so it does only defines, not any C code. This is based
* on information published in the Processor Abstraction Layer
* and the System Abstraction Layer manual.
*
* Copyright (C) 1998-2003 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
* Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
* Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
*/
#include <asm/kregs.h>
#include <asm/page.h>
#include <asm/pal.h>
#include <asm/percpu.h>
#define GATE_ADDR RGN_BASE(RGN_GATE)
/*
* 0xa000000000000000+2*PERCPU_PAGE_SIZE
* - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page)
*/
#define KERNEL_START (GATE_ADDR+__IA64_UL_CONST(0x100000000))
#define PERCPU_ADDR (-PERCPU_PAGE_SIZE)
#define LOAD_OFFSET (KERNEL_START - KERNEL_TR_PAGE_SIZE)
#ifndef __ASSEMBLY__
#include <linux/kernel.h>
#include <linux/types.h>
#define AT_VECTOR_SIZE_ARCH 2 /* entries in ARCH_DLINFO */
struct pci_vector_struct {
__u16 segment; /* PCI Segment number */
__u16 bus; /* PCI Bus number */
__u32 pci_id; /* ACPI split 16 bits device, 16 bits function (see section 6.1.1) */
__u8 pin; /* PCI PIN (0 = A, 1 = B, 2 = C, 3 = D) */
__u32 irq; /* IRQ assigned */
};
extern struct ia64_boot_param {
__u64 command_line; /* physical address of command line arguments */
__u64 efi_systab; /* physical address of EFI system table */
__u64 efi_memmap; /* physical address of EFI memory map */
__u64 efi_memmap_size; /* size of EFI memory map */
__u64 efi_memdesc_size; /* size of an EFI memory map descriptor */
__u32 efi_memdesc_version; /* memory descriptor version */
struct {
__u16 num_cols; /* number of columns on console output device */
__u16 num_rows; /* number of rows on console output device */
__u16 orig_x; /* cursor's x position */
__u16 orig_y; /* cursor's y position */
} console_info;
__u64 fpswa; /* physical address of the fpswa interface */
__u64 initrd_start;
__u64 initrd_size;
} *ia64_boot_param;
/*
* Macros to force memory ordering. In these descriptions, "previous"
* and "subsequent" refer to program order; "visible" means that all
* architecturally visible effects of a memory access have occurred
* (at a minimum, this means the memory has been read or written).
*
* wmb(): Guarantees that all preceding stores to memory-
* like regions are visible before any subsequent
* stores and that all following stores will be
* visible only after all previous stores.
* rmb(): Like wmb(), but for reads.
* mb(): wmb()/rmb() combo, i.e., all previous memory
* accesses are visible before all subsequent
* accesses and vice versa. This is also known as
* a "fence."
*
* Note: "mb()" and its variants cannot be used as a fence to order
* accesses to memory mapped I/O registers. For that, mf.a needs to
* be used. However, we don't want to always use mf.a because (a)
* it's (presumably) much slower than mf and (b) mf.a is supported for
* sequential memory pages only.
*/
#define mb() ia64_mf()
#define rmb() mb()
#define wmb() mb()
#define read_barrier_depends() do { } while(0)
#ifdef CONFIG_SMP
# define smp_mb() mb()
# define smp_rmb() rmb()
# define smp_wmb() wmb()
# define smp_read_barrier_depends() read_barrier_depends()
#else
# define smp_mb() barrier()
# define smp_rmb() barrier()
# define smp_wmb() barrier()
# define smp_read_barrier_depends() do { } while(0)
#endif
/*
* XXX check on this ---I suspect what Linus really wants here is
* acquire vs release semantics but we can't discuss this stuff with
* Linus just yet. Grrr...
*/
#define set_mb(var, value) do { (var) = (value); mb(); } while (0)
/*
* The group barrier in front of the rsm & ssm are necessary to ensure
* that none of the previous instructions in the same group are
* affected by the rsm/ssm.
*/
#ifdef __KERNEL__
/*
* Context switch from one thread to another. If the two threads have
* different address spaces, schedule() has already taken care of
* switching to the new address space by calling switch_mm().
*
* Disabling access to the fph partition and the debug-register
* context switch MUST be done before calling ia64_switch_to() since a
* newly created thread returns directly to
* ia64_ret_from_syscall_clear_r8.
*/
extern struct task_struct *ia64_switch_to (void *next_task);
struct task_struct;
extern void ia64_save_extra (struct task_struct *task);
extern void ia64_load_extra (struct task_struct *task);
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
extern void ia64_account_on_switch (struct task_struct *prev, struct task_struct *next);
# define IA64_ACCOUNT_ON_SWITCH(p,n) ia64_account_on_switch(p,n)
#else
# define IA64_ACCOUNT_ON_SWITCH(p,n)
#endif
#ifdef CONFIG_PERFMON
DECLARE_PER_CPU(unsigned long, pfm_syst_info);
# define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1)
#else
# define PERFMON_IS_SYSWIDE() (0)
#endif
#define IA64_HAS_EXTRA_STATE(t) \
((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID) \
|| PERFMON_IS_SYSWIDE())
#define __switch_to(prev,next,last) do { \
IA64_ACCOUNT_ON_SWITCH(prev, next); \
if (IA64_HAS_EXTRA_STATE(prev)) \
ia64_save_extra(prev); \
if (IA64_HAS_EXTRA_STATE(next)) \
ia64_load_extra(next); \
ia64_psr(task_pt_regs(next))->dfh = !ia64_is_local_fpu_owner(next); \
(last) = ia64_switch_to((next)); \
} while (0)
#ifdef CONFIG_SMP
/*
* In the SMP case, we save the fph state when context-switching away from a thread that
* modified fph. This way, when the thread gets scheduled on another CPU, the CPU can
* pick up the state from task->thread.fph, avoiding the complication of having to fetch
* the latest fph state from another CPU. In other words: eager save, lazy restore.
*/
# define switch_to(prev,next,last) do { \
if (ia64_psr(task_pt_regs(prev))->mfh && ia64_is_local_fpu_owner(prev)) { \
ia64_psr(task_pt_regs(prev))->mfh = 0; \
(prev)->thread.flags |= IA64_THREAD_FPH_VALID; \
__ia64_save_fpu((prev)->thread.fph); \
} \
__switch_to(prev, next, last); \
/* "next" in old context is "current" in new context */ \
if (unlikely((current->thread.flags & IA64_THREAD_MIGRATION) && \
(task_cpu(current) != \
task_thread_info(current)->last_cpu))) { \
platform_migrate(current); \
task_thread_info(current)->last_cpu = task_cpu(current); \
} \
} while (0)
#else
# define switch_to(prev,next,last) __switch_to(prev, next, last)
#endif
#define __ARCH_WANT_UNLOCKED_CTXSW
#define ARCH_HAS_PREFETCH_SWITCH_STACK
#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
void cpu_idle_wait(void);
#define arch_align_stack(x) (x)
void default_idle(void);
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
#endif /* _ASM_IA64_SYSTEM_H */
/* FILE TO BE DELETED. DO NOT ADD STUFF HERE! */
#include <asm/barrier.h>
#include <asm/exec.h>
#include <asm/switch_to.h>
#ifndef _ASM_IA64_UV_UV_H
#define _ASM_IA64_UV_UV_H
#include <asm/system.h>
#include <asm/sn/simulator.h>
static inline int is_uv_system(void)
......
......@@ -50,7 +50,6 @@
#include <asm/iosapic.h>
#include <asm/machvec.h>
#include <asm/page.h>
#include <asm/system.h>
#include <asm/numa.h>
#include <asm/sal.h>
#include <asm/cyclone.h>
......
......@@ -39,6 +39,7 @@
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/mca.h>
#include <asm/setup.h>
#include <asm/tlbflush.h>
#define EFI_DEBUG 0
......
......@@ -21,7 +21,6 @@
#include <asm/thread_info.h>
#include <asm/sal.h>
#include <asm/signal.h>
#include <asm/system.h>
#include <asm/unistd.h>
#include "entry.h"
......
......@@ -11,8 +11,9 @@
#include <asm/errno.h>
#include <asm/asm-offsets.h>
#include <asm/sigcontext.h>
#include <asm/system.h>
#include <asm/unistd.h>
#include <asm/kregs.h>
#include <asm/page.h>
#include "paravirt_inst.h"
/*
......
......@@ -5,8 +5,7 @@
* its layout.
*/
#include <asm/system.h>
#include <asm/page.h>
#include "paravirt_patchlist.h"
SECTIONS
......
......@@ -30,7 +30,6 @@
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#include <asm/mca_asm.h>
#include <linux/init.h>
#include <linux/linkage.h>
......
......@@ -98,7 +98,6 @@
#include <asm/machvec.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#undef DEBUG_INTERRUPT_ROUTING
......
......@@ -39,7 +39,6 @@
#include <asm/hw_irq.h>
#include <asm/machvec.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
#ifdef CONFIG_PERFMON
......
......@@ -54,7 +54,6 @@
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#include <asm/thread_info.h>
#include <asm/unistd.h>
#include <asm/errno.h>
......
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <asm/machvec.h>
#include <asm/system.h>
#ifdef CONFIG_IA64_GENERIC
......
......@@ -92,7 +92,6 @@
#include <asm/meminit.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#include <asm/sal.h>
#include <asm/mca.h>
#include <asm/kexec.h>
......
......@@ -28,7 +28,6 @@
#include <asm/machvec.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#include <asm/sal.h>
#include <asm/mca.h>
......
......@@ -11,7 +11,6 @@
#include <asm/patch.h>
#include <asm/processor.h>
#include <asm/sections.h>
#include <asm/system.h>
#include <asm/unistd.h>
/*
......
......@@ -12,7 +12,6 @@
#include <asm/machvec.h>
#include <linux/dma-mapping.h>
#include <asm/system.h>
#ifdef CONFIG_INTEL_IOMMU
......
......@@ -49,7 +49,6 @@
#include <asm/perfmon.h>
#include <asm/processor.h>
#include <asm/signal.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/delay.h>
......
......@@ -26,7 +26,6 @@
#include <asm/processor.h>
#include <asm/ptrace_offsets.h>
#include <asm/rse.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/unwind.h>
#ifdef CONFIG_PERFMON
......
......@@ -59,7 +59,6 @@
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/smp.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
#include <asm/unistd.h>
#include <asm/hpsim.h>
......
......@@ -44,7 +44,6 @@
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <asm/sal.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
#include <asm/unistd.h>
#include <asm/mca.h>
......
......@@ -55,7 +55,6 @@
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <asm/sal.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
#include <asm/unistd.h>
#include <asm/sn/arch.h>
......
......@@ -29,7 +29,6 @@
#include <asm/ptrace.h>
#include <asm/sal.h>
#include <asm/sections.h>
#include <asm/system.h>
#include "fsyscall_gtod_data.h"
......
......@@ -22,6 +22,7 @@
#include <asm/intrinsics.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/setup.h>
fpswa_interface_t *fpswa_interface;
EXPORT_SYMBOL(fpswa_interface);
......
......@@ -23,7 +23,6 @@
#include <linux/gfp.h>
#include <asm/page.h>
#include <asm/pal.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <linux/atomic.h>
#include <asm/tlbflush.h>
......
......@@ -41,7 +41,6 @@
#include <asm/ptrace_offsets.h>
#include <asm/rse.h>
#include <asm/sections.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include "entry.h"
......
#include <asm/cache.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm-generic/vmlinux.lds.h>
......
......@@ -14,7 +14,6 @@
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/uaccess.h>
extern int die(char *, struct pt_regs *, long);
......
......@@ -30,7 +30,6 @@
#include <asm/pgalloc.h>
#include <asm/sal.h>
#include <asm/sections.h>
#include <asm/system.h>
#include <asm/tlb.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
......
......@@ -14,7 +14,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <asm/ptrace.h>
#include <asm/system.h>
/*
* For IA64 we need to perform a complex little dance to get both
......
......@@ -24,7 +24,6 @@
#include <asm/machvec.h>
#include <asm/page.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/sal.h>
#include <asm/smp.h>
......
......@@ -33,9 +33,9 @@
#include <asm/io.h>
#include <asm/sal.h>
#include <asm/machvec.h>
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/vga.h>
#include <asm/setup.h>
#include <asm/sn/arch.h>
#include <asm/sn/addrs.h>
#include <asm/sn/pda.h>
......
......@@ -12,7 +12,6 @@
#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/nodemask.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/sn_cpuid.h>
......
......@@ -26,7 +26,6 @@
#include <asm/processor.h>
#include <asm/irq.h>
#include <asm/sal.h>
#include <asm/system.h>
#include <asm/delay.h>
#include <asm/io.h>
#include <asm/smp.h>
......
......@@ -14,7 +14,6 @@
#include <linux/clocksource.h>
#include <asm/hw_irq.h>
#include <asm/system.h>
#include <asm/timex.h>
#include <asm/sn/leds.h>
......
......@@ -14,7 +14,6 @@
#include <linux/capability.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/addrs.h>
......
......@@ -7,7 +7,6 @@
#include <asm/processor.h>
#include <asm/asmmacro.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/paravirt.h>
#include <asm/xen/privop.h>
#include <linux/elfnote.h>
......
......@@ -23,6 +23,7 @@ int xen_create_contiguous_region(unsigned long vstart, unsigned int order,
void xen_destroy_contiguous_region(unsigned long vstart, unsigned int order);
struct vm_area_struct;
int xen_remap_domain_mfn_range(struct vm_area_struct *vma,
unsigned long addr,
unsigned long mfn, int nr,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment