drivers/net: support hdlc function for QE-UCC

The driver add hdlc support for Freescale QUICC Engine.
It support NMSI and TSA mode.
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS

@@ -4870,6 +4870,13 @@ F:	drivers/net/ethernet/freescale/gianfar*
 X:	drivers/net/ethernet/freescale/gianfar_ptp.c
 F:	Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
 
+FREESCALE QUICC ENGINE UCC HDLC DRIVER
+M:	Zhao Qiang <qiang.zhao@nxp.com>
+L:	netdev@vger.kernel.org
+L:	linuxppc-dev@lists.ozlabs.org
+S:	Maintained
+F:	drivers/net/wan/fsl_ucc_hdlc*
+
 FREESCALE QUICC ENGINE UCC UART DRIVER
 M:	Timur Tabi <timur@tabi.org>
 L:	linuxppc-dev@lists.ozlabs.org

drivers/net/wan/Kconfig

@@ -280,6 +280,17 @@ config DSCC4
 	  To compile this driver as a module, choose M here: the
 	  module will be called dscc4.
 
+config FSL_UCC_HDLC
+	tristate "Freescale QUICC Engine HDLC support"
+	depends on HDLC
+	depends on QUICC_ENGINE
+	help
+	  Driver for Freescale QUICC Engine HDLC controller. The driver
+	  supports HDLC in NMSI and TDM mode.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called fsl_ucc_hdlc.
+
 config DSCC4_PCISYNC
 	bool "Etinc PCISYNC features"
 	depends on DSCC4

drivers/net/wan/Makefile

@@ -32,6 +32,7 @@ obj-$(CONFIG_WANXL)		+= wanxl.o
 obj-$(CONFIG_PCI200SYN)		+= pci200syn.o
 obj-$(CONFIG_PC300TOO)		+= pc300too.o
 obj-$(CONFIG_IXP4XX_HSS)	+= ixp4xx_hss.o
+obj-$(CONFIG_FSL_UCC_HDLC)	+= fsl_ucc_hdlc.o
 
 clean-files := wanxlfw.inc
 $(obj)/wanxl.o:	$(obj)/wanxlfw.inc

drivers/net/wan/fsl_ucc_hdlc.h

+/* Freescale QUICC Engine HDLC Device Driver
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef CONFIG_UCC_HDLC_H
+#define CONFIG_UCC_HDLC_H
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+
+#include <soc/fsl/qe/ucc.h>
+#include <soc/fsl/qe/ucc_fast.h>
+
+/* UCC HDLC event register */
+#define UCCE_HDLC_RX_EVENTS	\
+(UCC_HDLC_UCCE_RXF | UCC_HDLC_UCCE_RXB | UCC_HDLC_UCCE_BSY)
+#define UCCE_HDLC_TX_EVENTS	(UCC_HDLC_UCCE_TXB | UCC_HDLC_UCCE_TXE)
+
+struct ucc_hdlc_param {
+	__be16 riptr;
+	__be16 tiptr;
+	__be16 res0;
+	__be16 mrblr;
+	__be32 rstate;
+	__be32 rbase;
+	__be16 rbdstat;
+	__be16 rbdlen;
+	__be32 rdptr;
+	__be32 tstate;
+	__be32 tbase;
+	__be16 tbdstat;
+	__be16 tbdlen;
+	__be32 tdptr;
+	__be32 rbptr;
+	__be32 tbptr;
+	__be32 rcrc;
+	__be32 res1;
+	__be32 tcrc;
+	__be32 res2;
+	__be32 res3;
+	__be32 c_mask;
+	__be32 c_pres;
+	__be16 disfc;
+	__be16 crcec;
+	__be16 abtsc;
+	__be16 nmarc;
+	__be32 max_cnt;
+	__be16 mflr;
+	__be16 rfthr;
+	__be16 rfcnt;
+	__be16 hmask;
+	__be16 haddr1;
+	__be16 haddr2;
+	__be16 haddr3;
+	__be16 haddr4;
+	__be16 ts_tmp;
+	__be16 tmp_mb;
+};
+
+struct ucc_hdlc_private {
+	struct ucc_tdm	*utdm;
+	struct ucc_tdm_info *ut_info;
+	struct ucc_fast_private *uccf;
+	struct device *dev;
+	struct net_device *ndev;
+	struct napi_struct napi;
+	struct ucc_fast __iomem *uf_regs;	/* UCC Fast registers */
+	struct ucc_hdlc_param __iomem *ucc_pram;
+	u16 tsa;
+	bool hdlc_busy;
+	bool loopback;
+
+	u8 *tx_buffer;
+	u8 *rx_buffer;
+	dma_addr_t dma_tx_addr;
+	dma_addr_t dma_rx_addr;
+
+	struct qe_bd *tx_bd_base;
+	struct qe_bd *rx_bd_base;
+	dma_addr_t dma_tx_bd;
+	dma_addr_t dma_rx_bd;
+	struct qe_bd *curtx_bd;
+	struct qe_bd *currx_bd;
+	struct qe_bd *dirty_tx;
+	u16 currx_bdnum;
+
+	struct sk_buff **tx_skbuff;
+	struct sk_buff **rx_skbuff;
+	u16 skb_curtx;
+	u16 skb_currx;
+	unsigned short skb_dirtytx;
+
+	unsigned short tx_ring_size;
+	unsigned short rx_ring_size;
+	u32 ucc_pram_offset;
+
+	unsigned short encoding;
+	unsigned short parity;
+	u32 clocking;
+	spinlock_t lock;	/* lock for Tx BD and Tx buffer */
+#ifdef CONFIG_PM
+	struct ucc_hdlc_param *ucc_pram_bak;
+	u32 gumr;
+	u8 guemr;
+	u32 cmxsi1cr_l, cmxsi1cr_h;
+	u32 cmxsi1syr;
+	u32 cmxucr[4];
+#endif
+};
+
+#define TX_BD_RING_LEN	0x10
+#define RX_BD_RING_LEN	0x20
+#define RX_CLEAN_MAX	0x10
+#define NUM_OF_BUF	4
+#define MAX_RX_BUF_LENGTH	(48 * 0x20)
+#define MAX_FRAME_LENGTH	(MAX_RX_BUF_LENGTH + 8)
+#define ALIGNMENT_OF_UCC_HDLC_PRAM	64
+#define SI_BANK_SIZE	128
+#define MAX_HDLC_NUM	4
+#define HDLC_HEAD_LEN	2
+#define HDLC_CRC_SIZE	2
+#define TX_RING_MOD_MASK(size) (size - 1)
+#define RX_RING_MOD_MASK(size) (size - 1)
+
+#define HDLC_HEAD_MASK		0x0000
+#define DEFAULT_HDLC_HEAD	0xff44
+#define DEFAULT_ADDR_MASK	0x00ff
+#define DEFAULT_HDLC_ADDR	0x00ff
+
+#define BMR_GBL			0x20000000
+#define BMR_BIG_ENDIAN		0x10000000
+#define CRC_16BIT_MASK		0x0000F0B8
+#define CRC_16BIT_PRES		0x0000FFFF
+#define DEFAULT_RFTHR		1
+
+#define DEFAULT_PPP_HEAD    0xff03
+
+#endif

include/soc/fsl/qe/qe.h

@@ -657,6 +657,7 @@ struct ucc_slow_pram {
 #define UCC_SLOW_GUMR_L_MODE_QMC	0x00000002
 
 /* General UCC FAST Mode Register */
+#define UCC_FAST_GUMR_LOOPBACK	0x40000000
 #define UCC_FAST_GUMR_TCI	0x20000000
 #define UCC_FAST_GUMR_TRX	0x10000000
 #define UCC_FAST_GUMR_TTX	0x08000000

include/soc/fsl/qe/ucc_fast.h

@@ -21,19 +21,37 @@
 
 #include <soc/fsl/qe/ucc.h>
 
-/* Receive BD's status */
+/* Receive BD's status and length*/
 #define R_E	0x80000000	/* buffer empty */
 #define R_W	0x20000000	/* wrap bit */
 #define R_I	0x10000000	/* interrupt on reception */
 #define R_L	0x08000000	/* last */
 #define R_F	0x04000000	/* first */
 
-/* transmit BD's status */
+/* transmit BD's status and length*/
 #define T_R	0x80000000	/* ready bit */
 #define T_W	0x20000000	/* wrap bit */
 #define T_I	0x10000000	/* interrupt on completion */
 #define T_L	0x08000000	/* last */
 
+/* Receive BD's status */
+#define R_E_S	0x8000	/* buffer empty */
+#define R_W_S	0x2000	/* wrap bit */
+#define R_I_S	0x1000	/* interrupt on reception */
+#define R_L_S	0x0800	/* last */
+#define R_F_S	0x0400	/* first */
+#define R_CM_S	0x0200	/* continuous mode */
+#define R_CR_S	0x0004	/* crc */
+#define R_OV_S	0x0002	/* crc */
+
+/* transmit BD's status */
+#define T_R_S	0x8000	/* ready bit */
+#define T_W_S	0x2000	/* wrap bit */
+#define T_I_S	0x1000	/* interrupt on completion */
+#define T_L_S	0x0800	/* last */
+#define T_TC_S	0x0400	/* crc */
+#define T_TM_S	0x0200	/* continuous mode */
+
 /* Rx Data buffer must be 4 bytes aligned in most cases */
 #define UCC_FAST_RX_ALIGN			4
 #define UCC_FAST_MRBLR_ALIGNMENT		4