Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal

Pull thermal SoC updates from Eduardo Valentin:

 - Tegra DT binding documentation for Tegra194

 - Armada now supports ap806 and cp110

 - RCAR thermal now supports R8A774C0 and R8A77990

 - Fixes on thermal_hwmon, IMX, generic-ADC, ST, RCAR, Broadcom,
   Uniphier, QCOM, Tegra, PowerClamp, and Armada thermal drivers.

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (22 commits)
  thermal: generic-adc: Fix adc to temp interpolation
  thermal: rcar_thermal: add R8A77990 support
  dt-bindings: thermal: rcar-thermal: add R8A77990 support
  thermal: rcar_thermal: add R8A774C0 support
  dt-bindings: thermal: rcar-thermal: add R8A774C0 support
  dt-bindings: cp110: document the thermal interrupt capabilities
  dt-bindings: ap806: document the thermal interrupt capabilities
  MAINTAINERS: thermal: add entry for Marvell MVEBU thermal driver
  thermal: armada: add overheat interrupt support
  thermal: st: fix Makefile typo
  thermal: uniphier: Convert to SPDX identifier
  thermal/intel_powerclamp: Change to use DEFINE_SHOW_ATTRIBUTE macro
  thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macro
  dt-bindings: thermal: tegra-bpmp: Add Tegra194 support
  thermal: imx: save one condition block for normal case of nvmem initialization
  thermal: imx: fix for dependency on cpu-freq
  thermal: tsens: qcom: do not create duplicate regmap debugfs entries
  thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy()
  dt-bindings: thermal: rcar-gen3-thermal: All variants use 3 interrupts
  thermal: broadcom: use devm_thermal_zone_of_sensor_register
  ...

Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt

@@ -114,12 +114,17 @@ Documentation/devicetree/bindings/thermal/thermal.txt
 The thermal IP can probe the temperature all around the processor. It
 may feature several channels, each of them wired to one sensor.
 
+It is possible to setup an overheat interrupt by giving at least one
+critical point to any subnode of the thermal-zone node.
+
 Required properties:
 - compatible: must be one of:
   * marvell,armada-ap806-thermal
 - reg: register range associated with the thermal functions.
 
 Optional properties:
+- interrupts: overheat interrupt handle. Should point to line 18 of the
+  SEI irqchip. See interrupt-controller/interrupts.txt
 - #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
   to this IP and represents the channel ID. There is one sensor per
   channel. O refers to the thermal IP internal channel, while positive
@@ -133,6 +138,8 @@ ap_syscon1: system-controller@6f8000 {
 	ap_thermal: thermal-sensor@80 {
 		compatible = "marvell,armada-ap806-thermal";
 		reg = <0x80 0x10>;
+		interrupt-parent = <&sei>;
+		interrupts = <18>;
 		#thermal-sensor-cells = <1>;
 	};
 };

Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt

@@ -199,6 +199,9 @@ Thermal:
 The thermal IP can probe the temperature all around the processor. It
 may feature several channels, each of them wired to one sensor.
 
+It is possible to setup an overheat interrupt by giving at least one
+critical point to any subnode of the thermal-zone node.
+
 For common binding part and usage, refer to
 Documentation/devicetree/bindings/thermal/thermal.txt
 
@@ -208,6 +211,11 @@ Required properties:
 - reg: register range associated with the thermal functions.
 
 Optional properties:
+- interrupts-extended: overheat interrupt handle. Should point to
+  a line of the ICU-SEI irqchip (116 is what is usually used by the
+  firmware). The ICU-SEI will redirect towards interrupt line #37 of the
+  AP SEI which is shared across all CPs.
+  See interrupt-controller/interrupts.txt
 - #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
   to this IP and represents the channel ID. There is one sensor per
   channel. O refers to the thermal IP internal channel.
@@ -220,6 +228,7 @@ CP110_LABEL(syscon1): system-controller@6f8000 {
 	CP110_LABEL(thermal): thermal-sensor@70 {
 		compatible = "marvell,armada-cp110-thermal";
 		reg = <0x70 0x10>;
+		interrupts-extended = <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
 		#thermal-sensor-cells = <1>;
 	};
 };

Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt

@@ -21,8 +21,7 @@ Required properties:
 
 Optional properties:
 
-- interrupts		: interrupts routed to the TSC (3 for H3, M3-W, M3-N,
-			  and V3H)
+- interrupts		: interrupts routed to the TSC (must be 3).
 - power-domain		: Must contain a reference to the power domain. This
 			  property is mandatory if the thermal sensor instance
 			  is part of a controllable power domain.

Documentation/devicetree/bindings/thermal/rcar-thermal.txt

@@ -4,17 +4,19 @@ Required properties:
 - compatible		: "renesas,thermal-<soctype>",
 			   "renesas,rcar-gen2-thermal" (with thermal-zone) or
 			   "renesas,rcar-thermal" (without thermal-zone) as
-                           fallback except R-Car V3M/D3.
+                           fallback except R-Car V3M/E3/D3 and RZ/G2E.
 			  Examples with soctypes are:
 			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
 			    - "renesas,thermal-r8a7743" (RZ/G1M)
 			    - "renesas,thermal-r8a7744" (RZ/G1N)
+			    - "renesas,thermal-r8a774c0" (RZ/G2E)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
 			    - "renesas,thermal-r8a7790" (R-Car H2)
 			    - "renesas,thermal-r8a7791" (R-Car M2-W)
 			    - "renesas,thermal-r8a7792" (R-Car V2H)
 			    - "renesas,thermal-r8a7793" (R-Car M2-N)
 			    - "renesas,thermal-r8a77970" (R-Car V3M)
+			    - "renesas,thermal-r8a77990" (R-Car E3)
 			    - "renesas,thermal-r8a77995" (R-Car D3)
 - reg			: Address range of the thermal registers.
 			  The 1st reg will be recognized as common register
@@ -23,7 +25,7 @@ Required properties:
 Option properties:
 
 - interrupts		: If present should contain 3 interrupts for
-                          R-Car V3M/D3 or 1 interrupt otherwise.
+                          R-Car V3M/E3/D3 and RZ/G2E or 1 interrupt otherwise.
 
 Example (non interrupt support):
 

MAINTAINERS

@@ -9109,6 +9109,11 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/phy/marvell10g.c
 
+MARVELL MVEBU THERMAL DRIVER
+M:	Miquel Raynal <miquel.raynal@bootlin.com>
+S:	Maintained
+F:	drivers/thermal/armada_thermal.c
+
 MARVELL MVNETA ETHERNET DRIVER
 M:	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
 L:	netdev@vger.kernel.org

drivers/thermal/Kconfig

@@ -212,7 +212,7 @@ config HISI_THERMAL
 
 config IMX_THERMAL
 	tristate "Temperature sensor driver for Freescale i.MX SoCs"
-	depends on (ARCH_MXC && CPU_THERMAL) || COMPILE_TEST
+	depends on ARCH_MXC || COMPILE_TEST
 	depends on NVMEM || !NVMEM
 	depends on MFD_SYSCON
 	depends on OF

drivers/thermal/broadcom/bcm2835_thermal.c

@@ -18,6 +18,8 @@
 #include <linux/platform_device.h>
 #include <linux/thermal.h>
 
+#include "../thermal_hwmon.h"
+
 #define BCM2835_TS_TSENSCTL			0x00
 #define BCM2835_TS_TSENSSTAT			0x04
 
@@ -266,6 +268,15 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, tz);
 
+	/*
+	 * Thermal_zone doesn't enable hwmon as default,
+	 * enable it here
+	 */
+	tz->tzp->no_hwmon = false;
+	err = thermal_add_hwmon_sysfs(tz);
+	if (err)
+		goto err_tz;
+
 	bcm2835_thermal_debugfs(pdev);
 
 	return 0;

drivers/thermal/broadcom/brcmstb_thermal.c

@@ -329,7 +329,8 @@ static int brcmstb_thermal_probe(struct platform_device *pdev)
 	priv->dev = &pdev->dev;
 	platform_set_drvdata(pdev, priv);
 
-	thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &of_ops);
+	thermal = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv,
+						       &of_ops);
 	if (IS_ERR(thermal)) {
 		ret = PTR_ERR(thermal);
 		dev_err(&pdev->dev, "could not register sensor: %d\n", ret);
@@ -341,40 +342,23 @@ static int brcmstb_thermal_probe(struct platform_device *pdev)
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "could not get IRQ\n");
-		ret = irq;
-		goto err;
+		return irq;
 	}
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					brcmstb_tmon_irq_thread, IRQF_ONESHOT,
 					DRV_NAME, priv);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "could not request IRQ: %d\n", ret);
-		goto err;
+		return ret;
 	}
 
 	dev_info(&pdev->dev, "registered AVS TMON of-sensor driver\n");
 
 	return 0;
-
-err:
-	thermal_zone_of_sensor_unregister(&pdev->dev, thermal);
-	return ret;
-}
-
-static int brcmstb_thermal_exit(struct platform_device *pdev)
-{
-	struct brcmstb_thermal_priv *priv = platform_get_drvdata(pdev);
-	struct thermal_zone_device *thermal = priv->thermal;
-
-	if (thermal)
-		thermal_zone_of_sensor_unregister(&pdev->dev, priv->thermal);
-
-	return 0;
 }
 
 static struct platform_driver brcmstb_thermal_driver = {
 	.probe = brcmstb_thermal_probe,
-	.remove = brcmstb_thermal_exit,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = brcmstb_thermal_id_table,

drivers/thermal/imx_thermal.c

@@ -648,15 +648,24 @@ static const struct of_device_id of_imx_thermal_match[] = {
 };
 MODULE_DEVICE_TABLE(of, of_imx_thermal_match);
 
+#ifdef CONFIG_CPU_FREQ
 /*
  * Create cooling device in case no #cooling-cells property is available in
  * CPU node
  */
 static int imx_thermal_register_legacy_cooling(struct imx_thermal_data *data)
 {
-	struct device_node *np = of_get_cpu_node(data->policy->cpu, NULL);
+	struct device_node *np;
 	int ret;
 
+	data->policy = cpufreq_cpu_get(0);
+	if (!data->policy) {
+		pr_debug("%s: CPUFreq policy not found\n", __func__);
+		return -EPROBE_DEFER;
+	}
+
+	np = of_get_cpu_node(data->policy->cpu, NULL);
+
 	if (!np || !of_find_property(np, "#cooling-cells", NULL)) {
 		data->cdev = cpufreq_cooling_register(data->policy);
 		if (IS_ERR(data->cdev)) {
@@ -669,6 +678,24 @@ static int imx_thermal_register_legacy_cooling(struct imx_thermal_data *data)
 	return 0;
 }
 
+static void imx_thermal_unregister_legacy_cooling(struct imx_thermal_data *data)
+{
+	cpufreq_cooling_unregister(data->cdev);
+	cpufreq_cpu_put(data->policy);
+}
+
+#else
+
+static inline int imx_thermal_register_legacy_cooling(struct imx_thermal_data *data)
+{
+	return 0;
+}
+
+static inline void imx_thermal_unregister_legacy_cooling(struct imx_thermal_data *data)
+{
+}
+#endif
+
 static int imx_thermal_probe(struct platform_device *pdev)
 {
 	struct imx_thermal_data *data;
@@ -715,9 +742,10 @@ static int imx_thermal_probe(struct platform_device *pdev)
 
 	if (of_find_property(pdev->dev.of_node, "nvmem-cells", NULL)) {
 		ret = imx_init_from_nvmem_cells(pdev);
-		if (ret == -EPROBE_DEFER)
-			return ret;
 		if (ret) {
+			if (ret == -EPROBE_DEFER)
+				return ret;
+
 			dev_err(&pdev->dev, "failed to init from nvmem: %d\n",
 				ret);
 			return ret;
@@ -743,14 +771,11 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
 		     data->socdata->power_down_mask);
 
-	data->policy = cpufreq_cpu_get(0);
-	if (!data->policy) {
-		pr_debug("%s: CPUFreq policy not found\n", __func__);
-		return -EPROBE_DEFER;
-	}
-
 	ret = imx_thermal_register_legacy_cooling(data);
 	if (ret) {
+		if (ret == -EPROBE_DEFER)
+			return ret;
+
 		dev_err(&pdev->dev,
 			"failed to register cpufreq cooling device: %d\n", ret);
 		return ret;
@@ -762,7 +787,7 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		if (ret != -EPROBE_DEFER)
 			dev_err(&pdev->dev,
 				"failed to get thermal clk: %d\n", ret);
-		goto cpufreq_put;
+		goto legacy_cleanup;
 	}
 
 	/*
@@ -775,7 +800,7 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	ret = clk_prepare_enable(data->thermal_clk);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
-		goto cpufreq_put;
+		goto legacy_cleanup;
 	}
 
 	data->tz = thermal_zone_device_register("imx_thermal_zone",
@@ -829,9 +854,8 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	thermal_zone_device_unregister(data->tz);
 clk_disable:
 	clk_disable_unprepare(data->thermal_clk);
-cpufreq_put:
-	cpufreq_cooling_unregister(data->cdev);
-	cpufreq_cpu_put(data->policy);
+legacy_cleanup:
+	imx_thermal_unregister_legacy_cooling(data);
 
 	return ret;
 }

drivers/thermal/intel_powerclamp.c

@@ -708,19 +708,7 @@ static int powerclamp_debug_show(struct seq_file *m, void *unused)
 	return 0;
 }
 
-static int powerclamp_debug_open(struct inode *inode,
-			struct file *file)
-{
-	return single_open(file, powerclamp_debug_show, inode->i_private);
-}
-
-static const struct file_operations powerclamp_debug_fops = {
-	.open		= powerclamp_debug_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.owner		= THIS_MODULE,
-};
+DEFINE_SHOW_ATTRIBUTE(powerclamp_debug);
 
 static inline void powerclamp_create_debug_files(void)
 {

drivers/thermal/qcom/tsens-common.c

@@ -114,6 +114,14 @@ int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
 }
 
 static const struct regmap_config tsens_config = {
+	.name		= "tm",
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+};
+
+static const struct regmap_config tsens_srot_config = {
+	.name		= "srot",
 	.reg_bits	= 32,
 	.val_bits	= 32,
 	.reg_stride	= 4,
@@ -139,8 +147,8 @@ int __init init_common(struct tsens_device *tmdev)
 		if (IS_ERR(srot_base))
 			return PTR_ERR(srot_base);
 
-		tmdev->srot_map = devm_regmap_init_mmio(tmdev->dev,
-							srot_base, &tsens_config);
+		tmdev->srot_map = devm_regmap_init_mmio(tmdev->dev, srot_base,
+							&tsens_srot_config);
 		if (IS_ERR(tmdev->srot_map))
 			return PTR_ERR(tmdev->srot_map);
 

drivers/thermal/rcar_thermal.c

@@ -112,10 +112,18 @@ static const struct of_device_id rcar_thermal_dt_ids[] = {
 		.compatible = "renesas,rcar-gen2-thermal",
 		 .data = &rcar_gen2_thermal,
 	},
+	{
+		.compatible = "renesas,thermal-r8a774c0",
+		.data = &rcar_gen3_thermal,
+	},
 	{
 		.compatible = "renesas,thermal-r8a77970",
 		.data = &rcar_gen3_thermal,
 	},
+	{
+		.compatible = "renesas,thermal-r8a77990",
+		.data = &rcar_gen3_thermal,
+	},
 	{
 		.compatible = "renesas,thermal-r8a77995",
 		.data = &rcar_gen3_thermal,

drivers/thermal/st/Makefile

 obj-$(CONFIG_ST_THERMAL)		:= st_thermal.o
 obj-$(CONFIG_ST_THERMAL_SYSCFG)		+= st_thermal_syscfg.o
 obj-$(CONFIG_ST_THERMAL_MEMMAP)		+= st_thermal_memmap.o
-obj-$(CONFIG_STM32_THERMAL)		:= stm_thermal.o
\ No newline at end of file
+obj-$(CONFIG_STM32_THERMAL)		+= stm_thermal.o

drivers/thermal/tegra/soctherm.c

@@ -803,17 +803,7 @@ static int regs_show(struct seq_file *s, void *data)
 	return 0;
 }
 
-static int regs_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, regs_show, inode->i_private);
-}
-
-static const struct file_operations regs_fops = {
-	.open		= regs_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(regs);
 
 static void soctherm_debug_init(struct platform_device *pdev)
 {

drivers/thermal/thermal-generic-adc.c

@@ -26,7 +26,7 @@ struct gadc_thermal_info {
 
 static int gadc_thermal_adc_to_temp(struct gadc_thermal_info *gti, int val)
 {
-	int temp, adc_hi, adc_lo;
+	int temp, temp_hi, temp_lo, adc_hi, adc_lo;
 	int i;
 
 	for (i = 0; i < gti->nlookup_table; i++) {
@@ -36,13 +36,17 @@ static int gadc_thermal_adc_to_temp(struct gadc_thermal_info *gti, int val)
 
 	if (i == 0) {
 		temp = gti->lookup_table[0];
-	} else if (i >= (gti->nlookup_table - 1)) {
+	} else if (i >= gti->nlookup_table) {
 		temp = gti->lookup_table[2 * (gti->nlookup_table - 1)];
 	} else {
 		adc_hi = gti->lookup_table[2 * i - 1];
 		adc_lo = gti->lookup_table[2 * i + 1];
-		temp = gti->lookup_table[2 * i];
-		temp -= ((val - adc_lo) * 1000) / (adc_hi - adc_lo);
+
+		temp_hi = gti->lookup_table[2 * i - 2];
+		temp_lo = gti->lookup_table[2 * i];
+
+		temp = temp_hi + mult_frac(temp_lo - temp_hi, val - adc_hi,
+					   adc_lo - adc_hi);
 	}
 
 	return temp;

drivers/thermal/thermal_hwmon.h

@@ -19,13 +19,13 @@
 int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz);
 void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz);
 #else
-static int
+static inline int
 thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 {
 	return 0;
 }
 
-static void
+static inline void
 thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
 {
 }

drivers/thermal/uniphier_thermal.c

+// SPDX-License-Identifier: GPL-2.0
 /**
  * uniphier_thermal.c - Socionext UniPhier thermal driver
- *
  * Copyright 2014      Panasonic Corporation
  * Copyright 2016-2017 Socionext Inc.
- * All rights reserved.
- *
  * Author:
  *	Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/bitops.h>