iwlwifi: make hw rev checking more readable

Rather than ANDing with a mask - use existing macros, which
are more readable.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

drivers/net/wireless/iwlwifi/iwl-csr.h

@@ -295,6 +295,16 @@
 #define CSR_HW_REV_DASH(_val)          (((_val) & 0x0000003) >> 0)
 #define CSR_HW_REV_STEP(_val)          (((_val) & 0x000000C) >> 2)
 
+
+/**
+ *  hw_rev values
+ */
+enum {
+	SILICON_A_STEP = 0,
+	SILICON_B_STEP,
+};
+
+
 #define CSR_HW_REV_TYPE_MSK            (0x000FFF0)
 #define CSR_HW_REV_TYPE_5300           (0x0000020)
 #define CSR_HW_REV_TYPE_5350           (0x0000030)

drivers/net/wireless/iwlwifi/iwl-io.c

@@ -193,7 +193,7 @@ void iwl_force_nmi(struct iwl_trans *trans)
 	 * DEVICE_SET_NMI_8000B_REG - is used.
 	 */
 	if ((trans->cfg->device_family != IWL_DEVICE_FAMILY_8000) ||
-	    ((trans->hw_rev & 0xc) == 0x0))
+	    (CSR_HW_REV_STEP(trans->hw_rev) == SILICON_A_STEP))
 		iwl_write_prph(trans, DEVICE_SET_NMI_REG, DEVICE_SET_NMI_VAL);
 	else
 		iwl_write_prph(trans, DEVICE_SET_NMI_8000B_REG,

drivers/net/wireless/iwlwifi/mvm/nvm.c

@@ -64,6 +64,7 @@
  *****************************************************************************/
 #include <linux/firmware.h>
 #include "iwl-trans.h"
+#include "iwl-csr.h"
 #include "mvm.h"
 #include "iwl-eeprom-parse.h"
 #include "iwl-eeprom-read.h"
@@ -349,7 +350,7 @@ static int iwl_mvm_read_external_nvm(struct iwl_mvm *mvm)
 	/* Maximal size depends on HW family and step */
 	if (mvm->trans->cfg->device_family != IWL_DEVICE_FAMILY_8000)
 		max_section_size = IWL_MAX_NVM_SECTION_SIZE;
-	else if ((mvm->trans->hw_rev & 0xc) == 0) /* Family 8000 A-step */
+	else if (CSR_HW_REV_STEP(mvm->trans->hw_rev) == SILICON_A_STEP)
 		max_section_size = IWL_MAX_NVM_8000A_SECTION_SIZE;
 	else /* Family 8000 B-step */
 		max_section_size = IWL_MAX_NVM_8000B_SECTION_SIZE;

drivers/net/wireless/iwlwifi/pcie/trans.c

@@ -2190,7 +2190,7 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
 	 */
 	if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000)
 		trans->hw_rev = (trans->hw_rev & 0xfff0) |
-				((trans->hw_rev << 2) & 0xc);
+				(CSR_HW_REV_STEP(trans->hw_rev << 2));
 
 	trans->hw_id = (pdev->device << 16) + pdev->subsystem_device;
 	snprintf(trans->hw_id_str, sizeof(trans->hw_id_str),