i2c: emev2: add slave support

Add I2C slave provider using the generic slave interface.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-emev2.c

@@ -71,6 +71,7 @@ struct em_i2c_device {
 	struct i2c_adapter adap;
 	struct completion msg_done;
 	struct clk *sclk;
+	struct i2c_client *slave;
 };
 
 static inline void em_clear_set_bit(struct em_i2c_device *priv, u8 clear, u8 set, u8 reg)
@@ -226,22 +227,131 @@ static int em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	return num;
 }
 
+static bool em_i2c_slave_irq(struct em_i2c_device *priv)
+{
+	u8 status, value;
+	enum i2c_slave_event event;
+	int ret;
+
+	if (!priv->slave)
+		return false;
+
+	status = readb(priv->base + I2C_OFS_IICSE0);
+
+	/* Extension code, do not participate */
+	if (status & I2C_BIT_EXC0) {
+		em_clear_set_bit(priv, 0, I2C_BIT_LREL0, I2C_OFS_IICC0);
+		return true;
+	}
+
+	/* Stop detected, we don't know if it's for slave or master */
+	if (status & I2C_BIT_SPD0) {
+		/* Notify slave device */
+		i2c_slave_event(priv->slave, I2C_SLAVE_STOP, &value);
+		/* Pretend we did not handle the interrupt */
+		return false;
+	}
+
+	/* Only handle interrupts addressed to us */
+	if (!(status & I2C_BIT_COI0))
+		return false;
+
+	/* Enable stop interrupts */
+	em_clear_set_bit(priv, 0, I2C_BIT_SPIE0, I2C_OFS_IICC0);
+
+	/* Transmission or Reception */
+	if (status & I2C_BIT_TRC0) {
+		if (status & I2C_BIT_ACKD0) {
+			/* 9 bit interrupt mode */
+			em_clear_set_bit(priv, 0, I2C_BIT_WTIM0, I2C_OFS_IICC0);
+
+			/* Send data */
+			event = status & I2C_BIT_STD0 ?
+				I2C_SLAVE_READ_REQUESTED :
+				I2C_SLAVE_READ_PROCESSED;
+			i2c_slave_event(priv->slave, event, &value);
+			writeb(value, priv->base + I2C_OFS_IIC0);
+		} else {
+			/* NACK, stop transmitting */
+			em_clear_set_bit(priv, 0, I2C_BIT_LREL0, I2C_OFS_IICC0);
+		}
+	} else {
+		/* 8 bit interrupt mode */
+		em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_ACKE0,
+				I2C_OFS_IICC0);
+		em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_WREL0,
+				I2C_OFS_IICC0);
+
+		if (status & I2C_BIT_STD0) {
+			i2c_slave_event(priv->slave, I2C_SLAVE_WRITE_REQUESTED,
+					&value);
+		} else {
+			/* Recv data */
+			value = readb(priv->base + I2C_OFS_IIC0);
+			ret = i2c_slave_event(priv->slave,
+					I2C_SLAVE_WRITE_RECEIVED, &value);
+			if (ret < 0)
+				em_clear_set_bit(priv, I2C_BIT_ACKE0, 0,
+						I2C_OFS_IICC0);
+		}
+	}
+
+	return true;
+}
+
 static irqreturn_t em_i2c_irq_handler(int this_irq, void *dev_id)
 {
 	struct em_i2c_device *priv = dev_id;
 
+	if (em_i2c_slave_irq(priv))
+		return IRQ_HANDLED;
+
 	complete(&priv->msg_done);
+
 	return IRQ_HANDLED;
 }
 
 static u32 em_i2c_func(struct i2c_adapter *adap)
 {
-	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SLAVE;
+}
+
+static int em_i2c_reg_slave(struct i2c_client *slave)
+{
+	struct em_i2c_device *priv = i2c_get_adapdata(slave->adapter);
+
+	if (priv->slave)
+		return -EBUSY;
+
+	if (slave->flags & I2C_CLIENT_TEN)
+		return -EAFNOSUPPORT;
+
+	priv->slave = slave;
+
+	/* Set slave address */
+	writeb(slave->addr << 1, priv->base + I2C_OFS_SVA0);
+
+	return 0;
+}
+
+static int em_i2c_unreg_slave(struct i2c_client *slave)
+{
+	struct em_i2c_device *priv = i2c_get_adapdata(slave->adapter);
+
+	WARN_ON(!priv->slave);
+
+	writeb(0, priv->base + I2C_OFS_SVA0);
+
+	priv->slave = NULL;
+
+	return 0;
 }
 
 static struct i2c_algorithm em_i2c_algo = {
 	.master_xfer = em_i2c_xfer,
 	.functionality = em_i2c_func,
+	.reg_slave      = em_i2c_reg_slave,
+	.unreg_slave    = em_i2c_unreg_slave,
 };
 
 static int em_i2c_probe(struct platform_device *pdev)