Merge tag 'phy-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
 "New Support
   - Samsung Exynos gs101 drd combo phy
   - Qualcomm SC8180x USB uniphy, IPQ9574 QMP PCIe phy
   - Airoha EN7581 PCIe phy
   - Freescale i.MX8Q HSIO SerDes phy
   - Starfive jh7110 dphy tx

  Updates:
   - Resume support for j721e-wiz driver
   - Updates to Exynos usbdrd driver
   - Support for optional power domains in g12a usb2-phy driver
   - Debugfs support and updates to zynqmp driver"

* tag 'phy-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (56 commits)
  phy: airoha: Add dtime and Rx AEQ IO registers
  dt-bindings: phy: airoha: Add dtime and Rx AEQ IO registers
  dt-bindings: phy: rockchip-emmc-phy: Convert to dtschema
  dt-bindings: phy: qcom,qmp-usb: fix spelling error
  phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS)
  phy: exynos5-usbdrd: convert Vbus supplies to regulator_bulk
  phy: exynos5-usbdrd: convert (phy) register access clock to clk_bulk
  phy: exynos5-usbdrd: convert core clocks to clk_bulk
  phy: exynos5-usbdrd: support isolating HS and SS ports independently
  dt-bindings: phy: samsung,usb3-drd-phy: add gs101 compatible
  phy: core: Fix documentation of of_phy_get
  phy: starfive: Correct the dphy configure process
  phy: zynqmp: Add debugfs support
  phy: zynqmp: Take the phy mutex in xlate
  phy: zynqmp: Only wait for PLL lock "primary" instances
  phy: zynqmp: Store instance instead of type
  phy: zynqmp: Enable reference clock correctly
  phy: cadence-torrent: Check return value on register read
  phy: Fix the cacography in phy-exynos5250-usb2.c
  phy: phy-rockchip-samsung-hdptx: Select CONFIG_MFD_SYSCON
  ...

Documentation/devicetree/bindings/phy/airoha,en7581-pcie-phy.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/airoha,en7581-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7581 PCI-Express PHY
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description:
+  The PCIe PHY supports physical layer functionality for PCIe Gen2/Gen3 port.
+
+properties:
+  compatible:
+    const: airoha,en7581-pcie-phy
+
+  reg:
+    items:
+      - description: PCIE analog base address
+      - description: PCIE lane0 base address
+      - description: PCIE lane1 base address
+      - description: PCIE lane0 detection time base address
+      - description: PCIE lane1 detection time base address
+      - description: PCIE Rx AEQ base address
+
+  reg-names:
+    items:
+      - const: csr-2l
+      - const: pma0
+      - const: pma1
+      - const: p0-xr-dtime
+      - const: p1-xr-dtime
+      - const: rx-aeq
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        phy@11e80000 {
+            compatible = "airoha,en7581-pcie-phy";
+            #phy-cells = <0>;
+            reg = <0x0 0x1fa5a000 0x0 0xfff>,
+                  <0x0 0x1fa5b000 0x0 0xfff>,
+                  <0x0 0x1fa5c000 0x0 0xfff>,
+                  <0x0 0x1fc10044 0x0 0x4>,
+                  <0x0 0x1fc30044 0x0 0x4>,
+                  <0x0 0x1fc15030 0x0 0x104>;
+            reg-names = "csr-2l", "pma0", "pma1",
+                        "p0-xr-dtime", "p1-xr-dtime",
+                        "rx-aeq";
+        };
+    };

Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml

@@ -41,6 +41,9 @@ properties:
       Phandle to a regulator that provides power to the PHY. This
       regulator will be managed during the PHY power on/off sequence.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8qm-hsio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8QM SoC series High Speed IO(HSIO) SERDES PHY
+
+maintainers:
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-hsio
+      - fsl,imx8qxp-hsio
+  reg:
+    items:
+      - description: Base address and length of the PHY block
+      - description: HSIO control and status registers(CSR) of the PHY
+      - description: HSIO CSR of the controller bound to the PHY
+      - description: HSIO CSR for MISC
+
+  reg-names:
+    items:
+      - const: reg
+      - const: phy
+      - const: ctrl
+      - const: misc
+
+  "#phy-cells":
+    const: 3
+    description:
+      The first defines lane index.
+      The second defines the type of the PHY refer to the include phy.h.
+      The third defines the controller index, indicated which controller
+      is bound to the lane.
+
+  clocks:
+    minItems: 5
+    maxItems: 14
+
+  clock-names:
+    minItems: 5
+    maxItems: 14
+
+  fsl,hsio-cfg:
+    description: |
+      Specifies the use case of the HSIO module in the hardware design.
+      Regarding the design of i.MX8QM HSIO subsystem, HSIO module can be
+      confiured as following three use cases.
+      +---------------------------------------+
+      |                  | i.MX8QM            |
+      |------------------|--------------------|
+      |                  | Lane0| Lane1| Lane2|
+      |------------------|------|------|------|
+      | pciea-x2-sata    | PCIEA| PCIEA| SATA |
+      |------------------|------|------|------|
+      | pciea-x2-pcieb   | PCIEA| PCIEA| PCIEB|
+      |------------------|------|------|------|
+      | pciea-pcieb-sata | PCIEA| PCIEB| SATA |
+      +---------------------------------------+
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ pciea-x2-sata, pciea-x2-pcieb, pciea-pcieb-sata]
+    default: pciea-pcieb-sata
+
+  fsl,refclk-pad-mode:
+    description:
+      Specifies the mode of the refclk pad used. INPUT(PHY refclock is
+      provided externally via the refclk pad) or OUTPUT(PHY refclock is
+      derived from SoC internal source and provided on the refclk pad).
+      This property not exists means unused(PHY refclock is derived from
+      SoC internal source).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ input, output, unused ]
+    default: unused
+
+  power-domains:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - fsl,hsio-cfg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-hsio
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pclk0
+            - const: apb_pclk0
+            - const: phy0_crr
+            - const: ctl0_crr
+            - const: misc_crr
+        power-domains:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-hsio
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pclk0
+            - const: pclk1
+            - const: apb_pclk0
+            - const: apb_pclk1
+            - const: pclk2
+            - const: epcs_tx
+            - const: epcs_rx
+            - const: apb_pclk2
+            - const: phy0_crr
+            - const: phy1_crr
+            - const: ctl0_crr
+            - const: ctl1_crr
+            - const: ctl2_crr
+            - const: misc_crr
+        power-domains:
+          minItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-clock.h>
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/phy/phy-imx8-pcie.h>
+
+    phy@5f1a0000 {
+        compatible = "fsl,imx8qxp-hsio";
+        reg = <0x5f1a0000 0x10000>,
+              <0x5f120000 0x10000>,
+              <0x5f140000 0x10000>,
+              <0x5f160000 0x10000>;
+        reg-names = "reg", "phy", "ctrl", "misc";
+        clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>,
+                 <&phyx1_lpcg IMX_LPCG_CLK_4>,
+                 <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
+                 <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
+                 <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr", "misc_crr";
+        power-domains = <&pd IMX_SC_R_SERDES_1>;
+        #phy-cells = <3>;
+        fsl,hsio-cfg = "pciea-pcieb-sata";
+        fsl,refclk-pad-mode = "input";
+    };
+...

Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml

@@ -41,6 +41,12 @@ properties:
       Phandle to the system controller node
     $ref: /schemas/types.yaml#/definitions/phandle
 
+  swap-dx-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Specifies the ports which will swap the differential-pair (D+/D-),
+      default is not-swapped.
+
 # Required child nodes:
 
 patternProperties:

Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml

@@ -19,6 +19,8 @@ properties:
       - qcom,ipq6018-qmp-pcie-phy
       - qcom,ipq8074-qmp-gen3-pcie-phy
       - qcom,ipq8074-qmp-pcie-phy
+      - qcom,ipq9574-qmp-gen3x1-pcie-phy
+      - qcom,ipq9574-qmp-gen3x2-pcie-phy
 
   reg:
     items:

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml

@@ -91,8 +91,7 @@ properties:
   "#clock-cells": true
 
   clock-output-names:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   "#phy-cells":
     const: 0
@@ -222,14 +221,10 @@ allOf:
               - qcom,sm8650-qmp-gen4x2-pcie-phy
     then:
       properties:
-        clock-output-names:
-          minItems: 2
         "#clock-cells":
           const: 1
     else:
       properties:
-        clock-output-names:
-          maxItems: 1
         "#clock-cells":
           const: 0
 

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml

@@ -20,8 +20,9 @@ properties:
       - qcom,ipq8074-qmp-usb3-phy
       - qcom,ipq9574-qmp-usb3-phy
       - qcom,msm8996-qmp-usb3-phy
-      - com,qdu1000-qmp-usb3-uni-phy
+      - qcom,qdu1000-qmp-usb3-uni-phy
       - qcom,sa8775p-qmp-usb3-uni-phy
+      - qcom,sc8180x-qmp-usb3-uni-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sdx55-qmp-usb3-uni-phy
@@ -112,6 +113,7 @@ allOf:
             enum:
               - qcom,qdu1000-qmp-usb3-uni-phy
               - qcom,sa8775p-qmp-usb3-uni-phy
+              - qcom,sc8180x-qmp-usb3-uni-phy
               - qcom,sc8280xp-qmp-usb3-uni-phy
               - qcom,sm8150-qmp-usb3-uni-phy
               - qcom,sm8250-qmp-usb3-uni-phy
@@ -152,6 +154,7 @@ allOf:
           contains:
             enum:
               - qcom,sa8775p-qmp-usb3-uni-phy
+              - qcom,sc8180x-qmp-usb3-uni-phy
               - qcom,sc8280xp-qmp-usb3-uni-phy
               - qcom,x1e80100-qmp-usb3-uni-phy
     then:

Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml

@@ -15,6 +15,7 @@ if:
       contains:
         enum:
           - qcom,usb-hs-phy-apq8064
+          - qcom,usb-hs-phy-msm8660
           - qcom,usb-hs-phy-msm8960
 then:
   properties:
@@ -41,6 +42,7 @@ properties:
       - enum:
           - qcom,usb-hs-phy-apq8064
           - qcom,usb-hs-phy-msm8226
+          - qcom,usb-hs-phy-msm8660
           - qcom,usb-hs-phy-msm8916
           - qcom,usb-hs-phy-msm8960
           - qcom,usb-hs-phy-msm8974

Documentation/devicetree/bindings/phy/rockchip,rk3399-emmc-phy.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,rk3399-emmc-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip EMMC PHY
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3399-emmc-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: emmcclk
+
+  drive-impedance-ohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Specifies the drive impedance in Ohm.
+    enum: [33, 40, 50, 66, 100]
+    default: 50
+
+  rockchip,enable-strobe-pulldown:
+    type: boolean
+    description: |
+      Enable internal pull-down for the strobe
+      line.  If not set, pull-down is not used.
+
+  rockchip,output-tapdelay-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Specifies the phyctrl_otapdlysec register.
+    default: 0x4
+    maximum: 0xf
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@f780 {
+      compatible = "rockchip,rk3399-emmc-phy";
+      reg = <0xf780 0x20>;
+      clocks = <&sdhci>;
+      clock-names = "emmcclk";
+      drive-impedance-ohm = <50>;
+      #phy-cells = <0>;
+    };

Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt

-Rockchip EMMC PHY
------------------------
-
-Required properties:
- - compatible: rockchip,rk3399-emmc-phy
- - #phy-cells: must be 0
- - reg: PHY register address offset and length in "general
-   register files"
-
-Optional properties:
- - clock-names: Should contain "emmcclk".  Although this is listed as optional
-		(because most boards can get basic functionality without having
-		access to it), it is strongly suggested.
-		See ../clock/clock-bindings.txt for details.
- - clocks: Should have a phandle to the card clock exported by the SDHCI driver.
- - drive-impedance-ohm: Specifies the drive impedance in Ohm.
-                        Possible values are 33, 40, 50, 66 and 100.
-                        If not set, the default value of 50 will be applied.
- - rockchip,enable-strobe-pulldown: Enable internal pull-down for the strobe
-                                    line.  If not set, pull-down is not used.
- - rockchip,output-tapdelay-select: Specifies the phyctrl_otapdlysec register.
-                                    If not set, the register defaults to 0x4.
-                                    Maximum value 0xf.
-
-Example:
-
-
-grf: syscon@ff770000 {
-	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-...
-
-	emmcphy: phy@f780 {
-		compatible = "rockchip,rk3399-emmc-phy";
-		reg = <0xf780 0x20>;
-		clocks = <&sdhci>;
-		clock-names = "emmcclk";
-		drive-impedance-ohm = <50>;
-		#phy-cells = <0>;
-	};
-};

Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml

@@ -25,6 +25,7 @@ description: |
 properties:
   compatible:
     enum:
+      - google,gs101-usb31drd-phy
       - samsung,exynos5250-usbdrd-phy
       - samsung,exynos5420-usbdrd-phy
       - samsung,exynos5433-usbdrd-phy
@@ -57,7 +58,15 @@ properties:
       the OF graph bindings specified.
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: phy
+      - const: pcs
+      - const: pma
 
   samsung,pmu-syscon:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -72,6 +81,19 @@ properties:
     description:
       VBUS Boost 5V power source.
 
+  pll-supply:
+    description: Power supply for the USB PLL.
+  dvdd-usb20-supply:
+    description: DVDD power supply for the USB 2.0 phy.
+  vddh-usb20-supply:
+    description: VDDh power supply for the USB 2.0 phy.
+  vdd33-usb20-supply:
+    description: 3.3V power supply for the USB 2.0 phy.
+  vdda-usbdp-supply:
+    description: VDDa power supply for the USB DP phy.
+  vddh-usbdp-supply:
+    description: VDDh power supply for the USB DP phy.
+
 required:
   - compatible
   - clocks
@@ -81,6 +103,40 @@ required:
   - samsung,pmu-syscon
 
 allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,gs101-usb31drd-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Gate of main PHY clock
+            - description: Gate of PHY reference clock
+            - description: Gate of control interface AXI clock
+            - description: Gate of control interface APB clock
+            - description: Gate of SCL APB clock
+        clock-names:
+          items:
+            - const: phy
+            - const: ref
+            - const: ctrl_aclk
+            - const: ctrl_pclk
+            - const: scl_pclk
+        reg:
+          minItems: 3
+        reg-names:
+          minItems: 3
+      required:
+        - reg-names
+        - pll-supply
+        - dvdd-usb20-supply
+        - vddh-usb20-supply
+        - vdd33-usb20-supply
+        - vdda-usbdp-supply
+        - vddh-usbdp-supply
+
   - if:
       properties:
         compatible:
@@ -100,7 +156,20 @@ allOf:
             - const: phy_utmi
             - const: phy_pipe
             - const: itp
-    else:
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5250-usbdrd-phy
+              - samsung,exynos5420-usbdrd-phy
+              - samsung,exynos850-usbdrd-phy
+    then:
       properties:
         clocks:
           minItems: 2
@@ -109,6 +178,10 @@ allOf:
           items:
             - const: phy
             - const: ref
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
 
 additionalProperties: false
 

Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/starfive,jh7110-dphy-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive SoC MIPI D-PHY Tx Controller
+
+maintainers:
+  - Keith Zhao <keith.zhao@starfivetech.com>
+  - Shengyang Chen <shengyang.chen@starfivetech.com>
+
+description:
+  The Starfive SoC uses the MIPI DSI D-PHY based on M31 IP to transfer
+  DSI data.
+
+properties:
+  compatible:
+    const: starfive,jh7110-dphy-tx
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: txesc
+
+  resets:
+    items:
+      - description: MIPITX_DPHY_SYS reset
+
+  reset-names:
+    items:
+      - const: sys
+
+  power-domains:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@295e0000 {
+      compatible = "starfive,jh7110-dphy-tx";
+      reg = <0x295e0000 0x10000>;
+      clocks = <&voutcrg 14>;
+      clock-names = "txesc";
+      resets = <&syscrg 10>;
+      reset-names = "sys";
+      power-domains = <&aon_syscon 0>;
+      #phy-cells = <0>;
+    };

Documentation/devicetree/bindings/soc/rockchip/grf.yaml

@@ -176,9 +176,10 @@ allOf:
             Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
 
       patternProperties:
-        "phy@[0-9a-f]+$":
-          description:
-            Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+        "^phy@[0-9a-f]+$":
+          type: object
+          $ref: /schemas/phy/rockchip,rk3399-emmc-phy.yaml#
+          unevaluatedProperties: false
 
   - if:
       properties:
@@ -292,6 +293,15 @@ examples:
         #phy-cells = <0>;
       };
 
+      phy@f780 {
+        compatible = "rockchip,rk3399-emmc-phy";
+        reg = <0xf780 0x20>;
+        clocks = <&sdhci>;
+        clock-names = "emmcclk";
+        drive-impedance-ohm = <50>;
+        #phy-cells = <0>;
+      };
+
       u2phy0: usb2phy@e450 {
         compatible = "rockchip,rk3399-usb2phy";
         reg = <0xe450 0x10>;

MAINTAINERS

@@ -702,6 +702,14 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml
 F:	drivers/net/ethernet/mediatek/airoha_eth.c
 
+AIROHA PCIE PHY DRIVER
+M:	Lorenzo Bianconi <lorenzo@kernel.org>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/phy/airoha,en7581-pcie-phy.yaml
+F:	drivers/phy/phy-airoha-pcie-regs.h
+F:	drivers/phy/phy-airoha-pcie.c
+
 AIROHA SPI SNFI DRIVER
 M:	Lorenzo Bianconi <lorenzo@kernel.org>
 M:	Ray Liu <ray.liu@airoha.com>
@@ -21682,6 +21690,13 @@ S:	Supported
 F:	Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml
 F:	drivers/phy/starfive/phy-jh7110-dphy-rx.c
 
+STARFIVE JH7110 DPHY TX DRIVER
+M:	Keith Zhao <keith.zhao@starfivetech.com>
+M:	Shengyang Chen <shengyang.chen@starfivetech.com>
+S:	Supported
+F:	Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml
+F:	drivers/phy/starfive/phy-jh7110-dphy-tx.c
+
 STARFIVE JH7110 MMC/SD/SDIO DRIVER
 M:	William Qiu <william.qiu@starfivetech.com>
 S:	Supported

drivers/phy/Kconfig

@@ -72,6 +72,16 @@ config PHY_CAN_TRANSCEIVER
 	  functional modes using gpios and sets the attribute max link
 	  rate, for CAN drivers.
 
+config PHY_AIROHA_PCIE
+	tristate "Airoha PCIe-PHY Driver"
+	depends on ARCH_AIROHA || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Say Y here to add support for Airoha PCIe PHY driver.
+	  This driver create the basic PHY instance and provides initialize
+	  callback for PCIe GEN3 port.
+
 source "drivers/phy/allwinner/Kconfig"
 source "drivers/phy/amlogic/Kconfig"
 source "drivers/phy/broadcom/Kconfig"

drivers/phy/Makefile

@@ -10,6 +10,7 @@ obj-$(CONFIG_PHY_LPC18XX_USB_OTG)	+= phy-lpc18xx-usb-otg.o
 obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
 obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
 obj-$(CONFIG_USB_LGM_PHY)		+= phy-lgm-usb.o
+obj-$(CONFIG_PHY_AIROHA_PCIE)		+= phy-airoha-pcie.o
 obj-y					+= allwinner/	\
 					   amlogic/	\
 					   broadcom/	\

drivers/phy/broadcom/phy-bcm-ns-usb2.c

@@ -162,4 +162,5 @@ static struct platform_driver bcm_ns_usb2_driver = {
 };
 module_platform_driver(bcm_ns_usb2_driver);
 
+MODULE_DESCRIPTION("Broadcom Northstar USB 2.0 PHY Driver");
 MODULE_LICENSE("GPL v2");

drivers/phy/broadcom/phy-bcm-ns-usb3.c

@@ -240,5 +240,6 @@ static struct mdio_driver bcm_ns_usb3_mdio_driver = {
 
 mdio_module_driver(bcm_ns_usb3_mdio_driver);
 
+MODULE_DESCRIPTION("Broadcom Northstar USB 3.0 PHY Driver");
 MODULE_LICENSE("GPL v2");
 MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table);

drivers/phy/freescale/Kconfig

@@ -35,12 +35,19 @@ config PHY_FSL_IMX8M_PCIE
 	  Enable this to add support for the PCIE PHY as found on
 	  i.MX8M family of SOCs.
 
+config PHY_FSL_IMX8QM_HSIO
+	tristate "Freescale i.MX8QM HSIO PHY"
+	depends on OF && HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to add support for the HSIO PHY as found on
+	  i.MX8QM family of SOCs.
+
 config PHY_FSL_SAMSUNG_HDMI_PHY
 	tristate "Samsung HDMI PHY support"
 	depends on OF && HAS_IOMEM && COMMON_CLK
 	help
 	  Enable this to add support for the Samsung HDMI PHY in i.MX8MP.
-
 endif
 
 config PHY_FSL_LYNX_28G

drivers/phy/freescale/Makefile

@@ -3,5 +3,6 @@ obj-$(CONFIG_PHY_FSL_IMX8MQ_USB)	+= phy-fsl-imx8mq-usb.o
 obj-$(CONFIG_PHY_MIXEL_LVDS_PHY)	+= phy-fsl-imx8qm-lvds-phy.o
 obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY)	+= phy-fsl-imx8-mipi-dphy.o
 obj-$(CONFIG_PHY_FSL_IMX8M_PCIE)	+= phy-fsl-imx8m-pcie.o
+obj-$(CONFIG_PHY_FSL_IMX8QM_HSIO)	+= phy-fsl-imx8qm-hsio.o
 obj-$(CONFIG_PHY_FSL_LYNX_28G)		+= phy-fsl-lynx-28g.o
 obj-$(CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY)	+= phy-fsl-samsung-hdmi.o

drivers/phy/phy-core.c

@@ -664,7 +664,7 @@ static struct phy *_of_phy_get(struct device_node *np, int index)
  *
  * Returns the phy driver, after getting a refcount to it; or
  * -ENODEV if there is no such phy. The caller is responsible for
- * calling phy_put() to release that count.
+ * calling of_phy_put() to release that count.
  */
 struct phy *of_phy_get(struct device_node *np, const char *con_id)
 {

drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h

@@ -11,8 +11,22 @@
 #define QPHY_V5_PCS_PCIE_POWER_STATE_CONFIG2		0x0c
 #define QPHY_V5_PCS_PCIE_POWER_STATE_CONFIG4		0x14
 #define QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE		0x20
+#define QPHY_V5_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L	0x44
+#define QPHY_V5_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_H	0x48
+#define QPHY_V5_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L	0x4c
+#define QPHY_V5_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_H	0x50
 #define QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1		0x54
+#define QPHY_V5_PCS_PCIE_OSC_DTCT_CONFIG1		0x5c
+#define QPHY_V5_PCS_PCIE_OSC_DTCT_CONFIG2		0x60
+#define QPHY_V5_PCS_PCIE_OSC_DTCT_CONFIG4		0x68
+#define QPHY_V5_PCS_PCIE_OSC_DTCT_MODE2_CONFIG2		0x7c
+#define QPHY_V5_PCS_PCIE_OSC_DTCT_MODE2_CONFIG4		0x84
+#define QPHY_V5_PCS_PCIE_OSC_DTCT_MODE2_CONFIG5		0x88
+#define QPHY_V5_PCS_PCIE_OSC_DTCT_MODE2_CONFIG6		0x8c
 #define QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS		0x94
+#define QPHY_V5_PCS_PCIE_EQ_CONFIG1			0xa4
 #define QPHY_V5_PCS_PCIE_EQ_CONFIG2			0xa8
+#define QPHY_V5_PCS_PCIE_PRESET_P10_PRE			0xc0
+#define QPHY_V5_PCS_PCIE_PRESET_P10_POST		0xe4
 
 #endif

drivers/phy/qualcomm/phy-qcom-qmp-qserdes-pll.h

@@ -8,6 +8,9 @@
 
 /* QMP V2 PHY for PCIE gen3 ports - QSERDES PLL registers */
 #define QSERDES_PLL_BG_TIMER				0x00c
+#define QSERDES_PLL_SSC_EN_CENTER			0x010
+#define QSERDES_PLL_SSC_ADJ_PER1			0x014
+#define QSERDES_PLL_SSC_ADJ_PER2			0x018
 #define QSERDES_PLL_SSC_PER1				0x01c
 #define QSERDES_PLL_SSC_PER2				0x020
 #define QSERDES_PLL_SSC_STEP_SIZE1_MODE0		0x024

drivers/phy/qualcomm/phy-qcom-qmp-usb.c

@@ -2252,6 +2252,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sa8775p-qmp-usb3-uni-phy",
 		.data = &sa8775p_usb3_uniphy_cfg,
+	}, {
+		.compatible = "qcom,sc8180x-qmp-usb3-uni-phy",
+		.data = &sm8150_usb3_uniphy_cfg,
 	}, {
 		.compatible = "qcom,sc8280xp-qmp-usb3-uni-phy",
 		.data = &sc8280xp_usb3_uniphy_cfg,

drivers/phy/rockchip/Kconfig

@@ -86,7 +86,9 @@ config PHY_ROCKCHIP_PCIE
 config PHY_ROCKCHIP_SAMSUNG_HDPTX
 	tristate "Rockchip Samsung HDMI/eDP Combo PHY driver"
 	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+	depends on HAS_IOMEM
 	select GENERIC_PHY
+	select MFD_SYSCON
 	select RATIONAL
 	help
 	  Enable this to support the Rockchip HDMI/eDP Combo PHY

drivers/phy/samsung/phy-exynos5250-usb2.c

@@ -121,7 +121,7 @@
 #define EXYNOS_5420_USB_ISOL_HOST_OFFSET	0x70C
 #define EXYNOS_5250_USB_ISOL_ENABLE		BIT(0)
 
-/* Mode swtich register */
+/* Mode switch register */
 #define EXYNOS_5250_MODE_SWITCH_OFFSET		0x230
 #define EXYNOS_5250_MODE_SWITCH_MASK		1
 #define EXYNOS_5250_MODE_SWITCH_DEVICE		0

drivers/phy/st/phy-miphy28lp.c

@@ -228,11 +228,6 @@ struct miphy28lp_dev {
 	int nphys;
 };
 
-struct miphy_initval {
-	u16 reg;
-	u16 val;
-};
-
 enum miphy_sata_gen { SATA_GEN1, SATA_GEN2, SATA_GEN3 };
 
 static char *PHY_TYPE_name[] = { "sata-up", "pcie-up", "", "usb3-up" };

drivers/phy/starfive/Kconfig

@@ -15,6 +15,16 @@ config PHY_STARFIVE_JH7110_DPHY_RX
 	  system. If M is selected, the module will be called
 	  phy-jh7110-dphy-rx.ko.
 
+config PHY_STARFIVE_JH7110_DPHY_TX
+	tristate "StarFive JH7110 D-PHY TX Support"
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	select GENERIC_PHY_MIPI_DPHY
+	help
+	  Choose this option if you have a StarFive D-PHY TX in your
+	  system. If M is selected, the module will be called
+	  phy-jh7110-dphy-tx.ko.
+
 config PHY_STARFIVE_JH7110_PCIE
 	tristate "Starfive JH7110 PCIE 2.0/USB 3.0 PHY support"
 	depends on HAS_IOMEM

drivers/phy/starfive/Makefile

 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_PHY_STARFIVE_JH7110_DPHY_RX)	+= phy-jh7110-dphy-rx.o
+obj-$(CONFIG_PHY_STARFIVE_JH7110_DPHY_TX)	+= phy-jh7110-dphy-tx.o
 obj-$(CONFIG_PHY_STARFIVE_JH7110_PCIE)		+= phy-jh7110-pcie.o
 obj-$(CONFIG_PHY_STARFIVE_JH7110_USB)		+= phy-jh7110-usb.o

drivers/phy/starfive/phy-jh7110-dphy-rx.c

@@ -46,11 +46,6 @@
 
 #define STF_MAP_LANES_NUM			6
 
-struct regval {
-	u32 addr;
-	u32 val;
-};
-
 struct stf_dphy_info {
 	/**
 	 * @maps:

drivers/phy/ti/phy-am654-serdes.c

@@ -30,7 +30,6 @@
 #define LANE_R058		0x258
 #define LANE_R06c		0x26c
 #define LANE_R070		0x270
-#define LANE_R070		0x270
 #define LANE_R19C		0x39c
 
 #define COMLANE_R004		0xa04

drivers/phy/ti/phy-j721e-wiz.c

@@ -1076,27 +1076,12 @@ static int wiz_clock_register(struct wiz *wiz)
 	return ret;
 }
 
-static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
+static void wiz_clock_init(struct wiz *wiz)
 {
-	const struct wiz_clk_mux_sel *clk_mux_sel = wiz->clk_mux_sel;
-	struct device *dev = wiz->dev;
-	struct device_node *clk_node;
-	const char *node_name;
 	unsigned long rate;
-	struct clk *clk;
-	int ret;
-	int i;
 
-	clk = devm_clk_get(dev, "core_ref_clk");
-	if (IS_ERR(clk)) {
-		dev_err(dev, "core_ref_clk clock not found\n");
-		ret = PTR_ERR(clk);
-		return ret;
-	}
-	wiz->input_clks[WIZ_CORE_REFCLK] = clk;
-
-	rate = clk_get_rate(clk);
-	if (rate >= 100000000)
+	rate = clk_get_rate(wiz->input_clks[WIZ_CORE_REFCLK]);
+	if (rate >= REF_CLK_100MHZ)
 		regmap_field_write(wiz->pma_cmn_refclk_int_mode, 0x1);
 	else
 		regmap_field_write(wiz->pma_cmn_refclk_int_mode, 0x3);
@@ -1120,35 +1105,55 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
 		break;
 	}
 
-	if (wiz->data->pma_cmn_refclk1_int_mode) {
-		clk = devm_clk_get(dev, "core_ref1_clk");
-		if (IS_ERR(clk)) {
-			dev_err(dev, "core_ref1_clk clock not found\n");
-			ret = PTR_ERR(clk);
-			return ret;
-		}
-		wiz->input_clks[WIZ_CORE_REFCLK1] = clk;
-
-		rate = clk_get_rate(clk);
-		if (rate >= 100000000)
+	if (wiz->input_clks[WIZ_CORE_REFCLK1]) {
+		rate = clk_get_rate(wiz->input_clks[WIZ_CORE_REFCLK1]);
+		if (rate >= REF_CLK_100MHZ)
 			regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x1);
 		else
 			regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x3);
 	}
 
-	clk = devm_clk_get(dev, "ext_ref_clk");
-	if (IS_ERR(clk)) {
-		dev_err(dev, "ext_ref_clk clock not found\n");
-		ret = PTR_ERR(clk);
-		return ret;
-	}
-	wiz->input_clks[WIZ_EXT_REFCLK] = clk;
-
-	rate = clk_get_rate(clk);
-	if (rate >= 100000000)
+	rate = clk_get_rate(wiz->input_clks[WIZ_EXT_REFCLK]);
+	if (rate >= REF_CLK_100MHZ)
 		regmap_field_write(wiz->pma_cmn_refclk_mode, 0x0);
 	else
 		regmap_field_write(wiz->pma_cmn_refclk_mode, 0x2);
+}
+
+static int wiz_clock_probe(struct wiz *wiz, struct device_node *node)
+{
+	const struct wiz_clk_mux_sel *clk_mux_sel = wiz->clk_mux_sel;
+	struct device *dev = wiz->dev;
+	struct device_node *clk_node;
+	const char *node_name;
+	struct clk *clk;
+	int ret;
+	int i;
+
+	clk = devm_clk_get(dev, "core_ref_clk");
+	if (IS_ERR(clk))
+		return dev_err_probe(dev, PTR_ERR(clk),
+				     "core_ref_clk clock not found\n");
+
+	wiz->input_clks[WIZ_CORE_REFCLK] = clk;
+
+	if (wiz->data->pma_cmn_refclk1_int_mode) {
+		clk = devm_clk_get(dev, "core_ref1_clk");
+		if (IS_ERR(clk))
+			return dev_err_probe(dev, PTR_ERR(clk),
+					     "core_ref1_clk clock not found\n");
+
+		wiz->input_clks[WIZ_CORE_REFCLK1] = clk;
+	}
+
+	clk = devm_clk_get(dev, "ext_ref_clk");
+	if (IS_ERR(clk))
+		return dev_err_probe(dev, PTR_ERR(clk),
+				     "ext_ref_clk clock not found\n");
+
+	wiz->input_clks[WIZ_EXT_REFCLK] = clk;
+
+	wiz_clock_init(wiz);
 
 	switch (wiz->type) {
 	case AM64_WIZ_10G:
@@ -1157,8 +1162,9 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
 	case J721S2_WIZ_10G:
 		ret = wiz_clock_register(wiz);
 		if (ret)
-			dev_err(dev, "Failed to register wiz clocks\n");
-		return ret;
+			return dev_err_probe(dev, ret, "Failed to register wiz clocks\n");
+
+		return 0;
 	default:
 		break;
 	}
@@ -1167,16 +1173,15 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
 		node_name = clk_mux_sel[i].node_name;
 		clk_node = of_get_child_by_name(node, node_name);
 		if (!clk_node) {
-			dev_err(dev, "Unable to get %s node\n", node_name);
-			ret = -EINVAL;
+			ret = dev_err_probe(dev, -EINVAL, "Unable to get %s node\n", node_name);
 			goto err;
 		}
 
 		ret = wiz_mux_of_clk_register(wiz, clk_node, wiz->mux_sel_field[i],
 					      clk_mux_sel[i].table);
 		if (ret) {
-			dev_err(dev, "Failed to register %s clock\n",
-				node_name);
+			dev_err_probe(dev, ret, "Failed to register %s clock\n",
+				      node_name);
 			of_node_put(clk_node);
 			goto err;
 		}
@@ -1188,16 +1193,15 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
 		node_name = clk_div_sel[i].node_name;
 		clk_node = of_get_child_by_name(node, node_name);
 		if (!clk_node) {
-			dev_err(dev, "Unable to get %s node\n", node_name);
-			ret = -EINVAL;
+			ret = dev_err_probe(dev, -EINVAL, "Unable to get %s node\n", node_name);
 			goto err;
 		}
 
 		ret = wiz_div_clk_register(wiz, clk_node, wiz->div_sel_field[i],
 					   clk_div_sel[i].table);
 		if (ret) {
-			dev_err(dev, "Failed to register %s clock\n",
-				node_name);
+			dev_err_probe(dev, ret, "Failed to register %s clock\n",
+				      node_name);
 			of_node_put(clk_node);
 			goto err;
 		}
@@ -1593,7 +1597,7 @@ static int wiz_probe(struct platform_device *pdev)
 		goto err_get_sync;
 	}
 
-	ret = wiz_clock_init(wiz, node);
+	ret = wiz_clock_probe(wiz, node);
 	if (ret < 0) {
 		dev_warn(dev, "Failed to initialize clocks\n");
 		goto err_get_sync;
@@ -1655,12 +1659,41 @@ static void wiz_remove(struct platform_device *pdev)
 	pm_runtime_disable(dev);
 }
 
+static int wiz_resume_noirq(struct device *dev)
+{
+	struct device_node *node = dev->of_node;
+	struct wiz *wiz = dev_get_drvdata(dev);
+	int ret;
+
+	/* Enable supplemental Control override if available */
+	if (wiz->sup_legacy_clk_override)
+		regmap_field_write(wiz->sup_legacy_clk_override, 1);
+
+	wiz_clock_init(wiz);
+
+	ret = wiz_init(wiz);
+	if (ret) {
+		dev_err(dev, "WIZ initialization failed\n");
+		goto err_wiz_init;
+	}
+
+	return 0;
+
+err_wiz_init:
+	wiz_clock_cleanup(wiz, node);
+
+	return ret;
+}
+
+static DEFINE_NOIRQ_DEV_PM_OPS(wiz_pm_ops, NULL, wiz_resume_noirq);
+
 static struct platform_driver wiz_driver = {
 	.probe		= wiz_probe,
 	.remove_new	= wiz_remove,
 	.driver		= {
 		.name	= "wiz",
 		.of_match_table = wiz_id_table,
+		.pm	= pm_sleep_ptr(&wiz_pm_ops),
 	},
 };
 module_platform_driver(wiz_driver);

include/linux/soc/samsung/exynos-regs-pmu.h

@@ -660,5 +660,7 @@
 /* For Tensor GS101 */
 #define GS101_SYSIP_DAT0					(0x810)
 #define GS101_SYSTEM_CONFIGURATION				(0x3A00)
+#define GS101_PHY_CTRL_USB20					(0x3EB0)
+#define GS101_PHY_CTRL_USBDP					(0x3EB4)
 
 #endif /* __LINUX_SOC_EXYNOS_REGS_PMU_H */