Commit c34151a7 authored by Joerg Roedel's avatar Joerg Roedel Committed by H. Peter Anvin

x86, gart: Set DISTLBWALKPRB bit always

The DISTLBWALKPRB bit must be set for the GART because the
gatt table is mapped UC. But the current code does not set
the bit at boot when the BIOS setup the aperture correctly.
Fix that by setting this bit when enabling the GART instead
of the other places.

Cc: <stable@kernel.org>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: default avatarJoerg Roedel <joerg.roedel@amd.com>
Link: http://lkml.kernel.org/r/1303134346-5805-4-git-send-email-joerg.roedel@amd.comSigned-off-by: default avatarH. Peter Anvin <hpa@zytor.com>
parent af289bfe
......@@ -66,7 +66,7 @@ static inline void gart_set_size_and_enable(struct pci_dev *dev, u32 order)
* Don't enable translation but enable GART IO and CPU accesses.
* Also, set DISTLBWALKPRB since GART tables memory is UC.
*/
ctl = DISTLBWALKPRB | order << 1;
ctl = order << 1;
pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
}
......@@ -83,7 +83,7 @@ static inline void enable_gart_translation(struct pci_dev *dev, u64 addr)
/* Enable GART translation for this hammer. */
pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl);
ctl |= GARTEN;
ctl |= GARTEN | DISTLBWALKPRB;
ctl &= ~(DISGARTCPU | DISGARTIO);
pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
}
......
......@@ -499,7 +499,7 @@ int __init gart_iommu_hole_init(void)
* Don't enable translation yet but enable GART IO and CPU
* accesses and set DISTLBWALKPRB since GART table memory is UC.
*/
u32 ctl = DISTLBWALKPRB | aper_order << 1;
u32 ctl = aper_order << 1;
bus = amd_nb_bus_dev_ranges[i].bus;
dev_base = amd_nb_bus_dev_ranges[i].dev_base;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment