Commit c3bfcd4c authored by Mark Pearson's avatar Mark Pearson Committed by Hans de Goede

platform/x86: thinkpad_acpi: Add platform profile support

Add support to thinkpad_acpi for Lenovo platforms that have DYTC
version 5 support or newer to use the platform profile feature.

This will allow users to determine and control the platform modes
between low-power, balanced operation and performance modes.
Signed-off-by: default avatarMark Pearson <markpearson@lenovo.com>
Reviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210111162237.3469-1-markpearson@lenovo.comSigned-off-by: default avatarHans de Goede <hdegoede@redhat.com>
parent effe55ad
......@@ -66,6 +66,7 @@
#include <linux/acpi.h>
#include <linux/pci.h>
#include <linux/power_supply.h>
#include <linux/platform_profile.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/initval.h>
......@@ -9855,16 +9856,27 @@ static bool has_lapsensor;
static bool palm_state;
static bool lap_state;
static int lapsensor_get(bool *present, bool *state)
static int dytc_command(int command, int *output)
{
acpi_handle dytc_handle;
int output;
*present = false;
if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "DYTC", &dytc_handle)))
if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "DYTC", &dytc_handle))) {
/* Platform doesn't support DYTC */
return -ENODEV;
if (!acpi_evalf(dytc_handle, &output, NULL, "dd", DYTC_CMD_GET))
}
if (!acpi_evalf(dytc_handle, output, NULL, "dd", command))
return -EIO;
return 0;
}
static int lapsensor_get(bool *present, bool *state)
{
int output, err;
*present = false;
err = dytc_command(DYTC_CMD_GET, &output);
if (err)
return err;
*present = true; /*If we get his far, we have lapmode support*/
*state = output & BIT(DYTC_GET_LAPMODE_BIT) ? true : false;
......@@ -9983,6 +9995,264 @@ static struct ibm_struct proxsensor_driver_data = {
.exit = proxsensor_exit,
};
#if IS_ENABLED(CONFIG_ACPI_PLATFORM_PROFILE)
/*************************************************************************
* DYTC Platform Profile interface
*/
#define DYTC_CMD_QUERY 0 /* To get DYTC status - enable/revision */
#define DYTC_CMD_SET 1 /* To enable/disable IC function mode */
#define DYTC_CMD_RESET 0x1ff /* To reset back to default */
#define DYTC_QUERY_ENABLE_BIT 8 /* Bit 8 - 0 = disabled, 1 = enabled */
#define DYTC_QUERY_SUBREV_BIT 16 /* Bits 16 - 27 - sub revision */
#define DYTC_QUERY_REV_BIT 28 /* Bits 28 - 31 - revision */
#define DYTC_GET_FUNCTION_BIT 8 /* Bits 8-11 - function setting */
#define DYTC_GET_MODE_BIT 12 /* Bits 12-15 - mode setting */
#define DYTC_SET_FUNCTION_BIT 12 /* Bits 12-15 - function setting */
#define DYTC_SET_MODE_BIT 16 /* Bits 16-19 - mode setting */
#define DYTC_SET_VALID_BIT 20 /* Bit 20 - 1 = on, 0 = off */
#define DYTC_FUNCTION_STD 0 /* Function = 0, standard mode */
#define DYTC_FUNCTION_CQL 1 /* Function = 1, lap mode */
#define DYTC_FUNCTION_MMC 11 /* Function = 11, desk mode */
#define DYTC_MODE_PERFORM 2 /* High power mode aka performance */
#define DYTC_MODE_LOWPOWER 3 /* Low power mode */
#define DYTC_MODE_BALANCE 0xF /* Default mode aka balanced */
#define DYTC_SET_COMMAND(function, mode, on) \
(DYTC_CMD_SET | (function) << DYTC_SET_FUNCTION_BIT | \
(mode) << DYTC_SET_MODE_BIT | \
(on) << DYTC_SET_VALID_BIT)
#define DYTC_DISABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 0)
#define DYTC_ENABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 1)
static bool dytc_profile_available;
static enum platform_profile_option dytc_current_profile;
static atomic_t dytc_ignore_event = ATOMIC_INIT(0);
static DEFINE_MUTEX(dytc_mutex);
static int convert_dytc_to_profile(int dytcmode, enum platform_profile_option *profile)
{
switch (dytcmode) {
case DYTC_MODE_LOWPOWER:
*profile = PLATFORM_PROFILE_LOW_POWER;
break;
case DYTC_MODE_BALANCE:
*profile = PLATFORM_PROFILE_BALANCED;
break;
case DYTC_MODE_PERFORM:
*profile = PLATFORM_PROFILE_PERFORMANCE;
break;
default: /* Unknown mode */
return -EINVAL;
}
return 0;
}
static int convert_profile_to_dytc(enum platform_profile_option profile, int *perfmode)
{
switch (profile) {
case PLATFORM_PROFILE_LOW_POWER:
*perfmode = DYTC_MODE_LOWPOWER;
break;
case PLATFORM_PROFILE_BALANCED:
*perfmode = DYTC_MODE_BALANCE;
break;
case PLATFORM_PROFILE_PERFORMANCE:
*perfmode = DYTC_MODE_PERFORM;
break;
default: /* Unknown profile */
return -EOPNOTSUPP;
}
return 0;
}
/*
* dytc_profile_get: Function to register with platform_profile
* handler. Returns current platform profile.
*/
int dytc_profile_get(struct platform_profile_handler *pprof,
enum platform_profile_option *profile)
{
*profile = dytc_current_profile;
return 0;
}
/*
* Helper function - check if we are in CQL mode and if we are
* - disable CQL,
* - run the command
* - enable CQL
* If not in CQL mode, just run the command
*/
int dytc_cql_command(int command, int *output)
{
int err, cmd_err, dummy;
int cur_funcmode;
/* Determine if we are in CQL mode. This alters the commands we do */
err = dytc_command(DYTC_CMD_GET, output);
if (err)
return err;
cur_funcmode = (*output >> DYTC_GET_FUNCTION_BIT) & 0xF;
/* Check if we're OK to return immediately */
if ((command == DYTC_CMD_GET) && (cur_funcmode != DYTC_FUNCTION_CQL))
return 0;
if (cur_funcmode == DYTC_FUNCTION_CQL) {
atomic_inc(&dytc_ignore_event);
err = dytc_command(DYTC_DISABLE_CQL, &dummy);
if (err)
return err;
}
cmd_err = dytc_command(command, output);
/* Check return condition after we've restored CQL state */
if (cur_funcmode == DYTC_FUNCTION_CQL) {
err = dytc_command(DYTC_ENABLE_CQL, &dummy);
if (err)
return err;
}
return cmd_err;
}
/*
* dytc_profile_set: Function to register with platform_profile
* handler. Sets current platform profile.
*/
int dytc_profile_set(struct platform_profile_handler *pprof,
enum platform_profile_option profile)
{
int output;
int err;
if (!dytc_profile_available)
return -ENODEV;
err = mutex_lock_interruptible(&dytc_mutex);
if (err)
return err;
if (profile == PLATFORM_PROFILE_BALANCED) {
/* To get back to balanced mode we just issue a reset command */
err = dytc_command(DYTC_CMD_RESET, &output);
if (err)
goto unlock;
} else {
int perfmode;
err = convert_profile_to_dytc(profile, &perfmode);
if (err)
goto unlock;
/* Determine if we are in CQL mode. This alters the commands we do */
err = dytc_cql_command(DYTC_SET_COMMAND(DYTC_FUNCTION_MMC, perfmode, 1), &output);
if (err)
goto unlock;
}
/* Success - update current profile */
dytc_current_profile = profile;
unlock:
mutex_unlock(&dytc_mutex);
return err;
}
static void dytc_profile_refresh(void)
{
enum platform_profile_option profile;
int output, err;
int perfmode;
mutex_lock(&dytc_mutex);
err = dytc_cql_command(DYTC_CMD_GET, &output);
mutex_unlock(&dytc_mutex);
if (err)
return;
perfmode = (output >> DYTC_GET_MODE_BIT) & 0xF;
convert_dytc_to_profile(perfmode, &profile);
if (profile != dytc_current_profile) {
dytc_current_profile = profile;
platform_profile_notify();
}
}
static struct platform_profile_handler dytc_profile = {
.profile_get = dytc_profile_get,
.profile_set = dytc_profile_set,
};
static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
{
int err, output;
/* Setup supported modes */
set_bit(PLATFORM_PROFILE_LOW_POWER, dytc_profile.choices);
set_bit(PLATFORM_PROFILE_BALANCED, dytc_profile.choices);
set_bit(PLATFORM_PROFILE_PERFORMANCE, dytc_profile.choices);
dytc_profile_available = false;
err = dytc_command(DYTC_CMD_QUERY, &output);
/*
* If support isn't available (ENODEV) then don't return an error
* and don't create the sysfs group
*/
if (err == -ENODEV)
return 0;
/* For all other errors we can flag the failure */
if (err)
return err;
/* Check DYTC is enabled and supports mode setting */
if (output & BIT(DYTC_QUERY_ENABLE_BIT)) {
/* Only DYTC v5.0 and later has this feature. */
int dytc_version;
dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF;
if (dytc_version >= 5) {
dbg_printk(TPACPI_DBG_INIT,
"DYTC version %d: thermal mode available\n", dytc_version);
/* Create platform_profile structure and register */
err = platform_profile_register(&dytc_profile);
/*
* If for some reason platform_profiles aren't enabled
* don't quit terminally.
*/
if (err)
return 0;
dytc_profile_available = true;
/* Ensure initial values are correct */
dytc_profile_refresh();
}
}
return 0;
}
static void dytc_profile_exit(void)
{
if (dytc_profile_available) {
dytc_profile_available = false;
platform_profile_remove();
}
}
static struct ibm_struct dytc_profile_driver_data = {
.name = "dytc-profile",
.exit = dytc_profile_exit,
};
#endif /* CONFIG_ACPI_PLATFORM_PROFILE */
/*************************************************************************
* Keyboard language interface
*/
......@@ -10204,8 +10474,14 @@ static void tpacpi_driver_event(const unsigned int hkey_event)
mutex_unlock(&kbdlight_mutex);
}
if (hkey_event == TP_HKEY_EV_THM_CSM_COMPLETED)
if (hkey_event == TP_HKEY_EV_THM_CSM_COMPLETED) {
lapsensor_refresh();
#if IS_ENABLED(CONFIG_ACPI_PLATFORM_PROFILE)
/* If we are already accessing DYTC then skip dytc update */
if (!atomic_add_unless(&dytc_ignore_event, -1, 0))
dytc_profile_refresh();
#endif
}
}
static void hotkey_driver_event(const unsigned int scancode)
......@@ -10648,6 +10924,12 @@ static struct ibm_init_struct ibms_init[] __initdata = {
.init = tpacpi_proxsensor_init,
.data = &proxsensor_driver_data,
},
#if IS_ENABLED(CONFIG_ACPI_PLATFORM_PROFILE)
{
.init = tpacpi_dytc_profile_init,
.data = &dytc_profile_driver_data,
},
#endif
{
.init = tpacpi_kbdlang_init,
.data = &kbdlang_driver_data,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment