Commit c4ad65e6 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: pcmuio: remove 'iobases' from subdevice private data

The 'asic' and 'port' associated with a given subdevice can easily be
found based on the subdevice 'index'. With that information we can
then calculate the correct iobase and register offset needed to read/
write the 8-bit ports.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 021314f8
......@@ -141,9 +141,6 @@ static const struct pcmuio_board pcmuio_boards[] = {
};
struct pcmuio_subdev_private {
/* mapping of halfwords (bytes) in port/chanarray to iobase */
unsigned long iobases[PORTS_PER_SUBDEV];
/* The below is only used for intr subdevices */
struct {
/* if non-negative, this subdev has an interrupt asic */
......@@ -190,7 +187,9 @@ static int pcmuio_dio_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct pcmuio_subdev_private *subpriv = s->private;
int asic = s->index / 2;
int port = (s->index % 2) ? 3 : 0;
unsigned long iobase = dev->iobase + (asic * ASIC_IOSIZE);
int byte_no;
/* NOTE:
......@@ -207,10 +206,8 @@ static int pcmuio_dio_insn_bits(struct comedi_device *dev,
s->state = 0;
for (byte_no = 0; byte_no < s->n_chan / CHANS_PER_PORT; ++byte_no) {
/* address of 8-bit port */
unsigned long ioaddr = subpriv->iobases[byte_no],
/* bit offset of port in 32-bit doubleword */
offset = byte_no * 8;
/* bit offset of port in 32-bit doubleword */
unsigned long offset = byte_no * 8;
/* this 8-bit port's data */
unsigned char byte = 0,
/* The write mask for this port (if any) */
......@@ -218,12 +215,12 @@ static int pcmuio_dio_insn_bits(struct comedi_device *dev,
/* The data byte for this port */
data_byte = (data[1] >> offset) & 0xff;
byte = inb(ioaddr); /* read all 8-bits for this port */
byte = inb(iobase + PCMUIO_PORT_REG(port + byte_no));
if (write_mask_byte) {
byte &= ~write_mask_byte;
byte |= ~data_byte & write_mask_byte;
outb(byte, ioaddr);
outb(byte, iobase + PCMUIO_PORT_REG(port + byte_no));
}
/* save the digital input lines for this byte.. */
s->state |= ((unsigned int)byte) << offset;
......@@ -239,15 +236,14 @@ static int pcmuio_dio_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct pcmuio_subdev_private *subpriv = s->private;
int chan = CR_CHAN(insn->chanspec), byte_no = chan / 8, bit_no =
chan % 8;
unsigned long ioaddr;
int asic = s->index / 2;
int port = (s->index % 2) ? 3 : 0;
unsigned long iobase = dev->iobase + (asic * ASIC_IOSIZE);
unsigned int chan = CR_CHAN(insn->chanspec);
int byte_no = chan / 8;
int bit_no = chan % 8;
unsigned char byte;
/* Compute ioaddr for this channel */
ioaddr = subpriv->iobases[byte_no];
/* NOTE:
writing a 0 an IO channel's bit sets the channel to INPUT
and pulls the line high as well
......@@ -269,7 +265,7 @@ static int pcmuio_dio_insn_config(struct comedi_device *dev,
case INSN_CONFIG_DIO_INPUT:
/* write a 0 to the actual register representing the channel
to set it to 'input'. 0 means "float high". */
byte = inb(ioaddr);
byte = inb(iobase + PCMUIO_PORT_REG(port + byte_no));
byte &= ~(1 << bit_no);
/**< set input channel to '0' */
......@@ -279,7 +275,7 @@ static int pcmuio_dio_insn_config(struct comedi_device *dev,
* as all channels are implicitly output -- but input
* channels are set to float-high.
*/
outb(byte, ioaddr);
outb(byte, iobase + PCMUIO_PORT_REG(port + byte_no));
/* save to io_bits */
s->io_bits &= ~(1 << chan);
......@@ -706,8 +702,6 @@ static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
subpriv->intr.asic = -1;
s->len_chanlist = 1;
/* save the ioport address for each 'port' of 8 channels in the
subdevice */
for (byte_no = 0; byte_no < PORTS_PER_SUBDEV;
++byte_no, ++port) {
if (port >= PORTS_PER_ASIC) {
......@@ -715,8 +709,6 @@ static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
++asic;
thisasic_chanct = 0;
}
subpriv->iobases[byte_no] = dev->iobase +
(asic * ASIC_IOSIZE) + port;
if (thisasic_chanct <
CHANS_PER_PORT * INTR_PORTS_PER_ASIC
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment