dt-bindings: pinctrl: fix bias-pull,up typo

This patch fixes a shared typo in several qcom pinctrl dt-bindings.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt

@@ -42,7 +42,7 @@ information about e.g. the mux function.
 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:
 
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
  output-low, output-high.
 
 Non-empty subnodes must specify the 'pins' property.

Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt

@@ -44,7 +44,7 @@ information about e.g. the mux function.
 
 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength.
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength.
 
 Non-empty subnodes must specify the 'pins' property.
 Note that not all properties are valid for all pins.

Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt

@@ -42,7 +42,7 @@ information about e.g. the mux function.
 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:
 
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
  output-low, output-high.
 
 Non-empty subnodes must specify the 'pins' property.

Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt

@@ -42,7 +42,7 @@ information about e.g. the mux function.
 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:
 
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
  output-low, output-high.
 
 Non-empty subnodes must specify the 'pins' property.

Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt

@@ -41,7 +41,7 @@ information about e.g. the mux function.
 
 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength.
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength.
 
 Non-empty subnodes must specify the 'pins' property.
 Note that not all properties are valid for all pins.