Skip to content

L
linux
Commit c512150b authored by Linus Walleij's avatar Linus Walleij Committed by Mark Brown
Browse files
Options

regulator: ab8500: Remove unused platform data 

The struct ab8500_regulator_platform_data was a leftover
since the days before we probed all regulators from the
device tree. The ab8500-ext regulator was the only used,
defining platform data and register intialization that
was never used for anything, a copy of a boardfile no
longer in use.

Delete the ab8500_regulator_platform_data and make the
ab8500-ext regulator reference the regulator init data
in the local file directly. We are 100% device tree
these days.

Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201205004057.1712753-1-linus.walleij@linaro.orgSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 90fd840e
Hide whitespace changes
Inline Side-by-side
Showing with 2 additions and 428 deletions
drivers/regulator/ab8500-ext.c
View file @ c512150b
...@@ -24,403 +24,6 @@ ...@@ -24,403 +24,6 @@
#include <linux/mfd/abx500/ab8500.h> #include <linux/mfd/abx500/ab8500.h>
#include <linux/regulator/ab8500.h> #include <linux/regulator/ab8500.h>
static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
/* Main display, u8500 R3 uib */
REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"),
/* Main display, u8500 uib and ST uib */
REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"),
/* Secondary display, ST uib */
REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"),
/* SFH7741 proximity sensor */
REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
/* BH1780GLS ambient light sensor */
REGULATOR_SUPPLY("vcc", "2-0029"),
/* lsm303dlh accelerometer */
REGULATOR_SUPPLY("vdd", "2-0018"),
/* lsm303dlhc accelerometer */
REGULATOR_SUPPLY("vdd", "2-0019"),
/* lsm303dlh magnetometer */
REGULATOR_SUPPLY("vdd", "2-001e"),
/* Rohm BU21013 Touchscreen devices */
REGULATOR_SUPPLY("avdd", "3-005c"),
REGULATOR_SUPPLY("avdd", "3-005d"),
/* Synaptics RMI4 Touchscreen device */
REGULATOR_SUPPLY("vdd", "3-004b"),
/* L3G4200D Gyroscope device */
REGULATOR_SUPPLY("vdd", "2-0068"),
/* Ambient light sensor device */
REGULATOR_SUPPLY("vdd", "3-0029"),
/* Pressure sensor device */
REGULATOR_SUPPLY("vdd", "2-005c"),
/* Cypress TrueTouch Touchscreen device */
REGULATOR_SUPPLY("vcpin", "spi8.0"),
/* Camera device */
REGULATOR_SUPPLY("vaux12v5", "mmio_camera"),
};
static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
/* On-board eMMC power */
REGULATOR_SUPPLY("vmmc", "sdi4"),
/* AB8500 audio codec */
REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
/* AB8500 accessory detect 1 */
REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"),
/* AB8500 Tv-out device */
REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"),
/* AV8100 HDMI device */
REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"),
};
static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
REGULATOR_SUPPLY("v-SD-STM", "stm"),
/* External MMC slot power */
REGULATOR_SUPPLY("vmmc", "sdi0"),
};
static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
/* TV-out DENC supply */
REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
/* Internal general-purpose ADC */
REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
/* ADC for charger */
REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"),
/* AB8500 Tv-out device */
REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"),
};
static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
/* AB8500 audio-codec main supply */
REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
};
static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
/* AB8500 audio-codec Mic1 supply */
REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
};
static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
/* AB8500 audio-codec Mic2 supply */
REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
};
static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
/* AB8500 audio-codec DMic supply */
REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
};
static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
/* SoC core supply, no device */
REGULATOR_SUPPLY("v-intcore", NULL),
/* USB Transceiver */
REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
/* Handled by abx500 clk driver */
REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"),
};
static struct regulator_consumer_supply ab8500_vana_consumers[] = {
/* DB8500 DSI */
REGULATOR_SUPPLY("vdddsi1v2", "mcde"),
REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"),
REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"),
REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"),
REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"),
REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"),
/* DB8500 CSI */
REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"),
};
/* ab8500 regulator register initialization */
static struct ab8500_regulator_reg_init ab8500_reg_init[] = {
/*
* VanaRequestCtrl = HP/LP depending on VxRequest
* VextSupply1RequestCtrl = HP/LP depending on VxRequest
*/
INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00),
/*
* VextSupply2RequestCtrl = HP/LP depending on VxRequest
* VextSupply3RequestCtrl = HP/LP depending on VxRequest
* Vaux1RequestCtrl = HP/LP depending on VxRequest
* Vaux2RequestCtrl = HP/LP depending on VxRequest
*/
INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00),
/*
* Vaux3RequestCtrl = HP/LP depending on VxRequest
* SwHPReq = Control through SWValid disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00),
/*
* VanaSysClkReq1HPValid = disabled
* Vaux1SysClkReq1HPValid = disabled
* Vaux2SysClkReq1HPValid = disabled
* Vaux3SysClkReq1HPValid = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
/*
* VextSupply1SysClkReq1HPValid = disabled
* VextSupply2SysClkReq1HPValid = disabled
* VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40),
/*
* VanaHwHPReq1Valid = disabled
* Vaux1HwHPreq1Valid = disabled
* Vaux2HwHPReq1Valid = disabled
* Vaux3HwHPReqValid = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00),
/*
* VextSupply1HwHPReq1Valid = disabled
* VextSupply2HwHPReq1Valid = disabled
* VextSupply3HwHPReq1Valid = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00),
/*
* VanaHwHPReq2Valid = disabled
* Vaux1HwHPReq2Valid = disabled
* Vaux2HwHPReq2Valid = disabled
* Vaux3HwHPReq2Valid = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00),
/*
* VextSupply1HwHPReq2Valid = disabled
* VextSupply2HwHPReq2Valid = disabled
* VextSupply3HwHPReq2Valid = HWReq2 controlled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04),
/*
* VanaSwHPReqValid = disabled
* Vaux1SwHPReqValid = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00),
/*
* Vaux2SwHPReqValid = disabled
* Vaux3SwHPReqValid = disabled
* VextSupply1SwHPReqValid = disabled
* VextSupply2SwHPReqValid = disabled
* VextSupply3SwHPReqValid = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00),
/*
* SysClkReq2Valid1 = SysClkReq2 controlled
* SysClkReq3Valid1 = disabled
* SysClkReq4Valid1 = SysClkReq4 controlled
* SysClkReq5Valid1 = disabled
* SysClkReq6Valid1 = SysClkReq6 controlled
* SysClkReq7Valid1 = disabled
* SysClkReq8Valid1 = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a),
/*
* SysClkReq2Valid2 = disabled
* SysClkReq3Valid2 = disabled
* SysClkReq4Valid2 = disabled
* SysClkReq5Valid2 = disabled
* SysClkReq6Valid2 = SysClkReq6 controlled
* SysClkReq7Valid2 = disabled
* SysClkReq8Valid2 = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20),
/*
* VTVoutEna = disabled
* Vintcore12Ena = disabled
* Vintcore12Sel = 1.25 V
* Vintcore12LP = inactive (HP)
* VTVoutLP = inactive (HP)
*/
INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10),
/*
* VaudioEna = disabled
* VdmicEna = disabled
* Vamic1Ena = disabled
* Vamic2Ena = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00),
/*
* Vamic1_dzout = high-Z when Vamic1 is disabled
* Vamic2_dzout = high-Z when Vamic2 is disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00),
/*
* VPll = Hw controlled (NOTE! PRCMU bits)
* VanaRegu = force off
*/
INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02),
/*
* VrefDDREna = disabled
* VrefDDRSleepMode = inactive (no pulldown)
*/
INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00),
/*
* VextSupply1Regu = force LP
* VextSupply2Regu = force OFF
* VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP)
* ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0
* ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0
*/
INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13),
/*
* Vaux1Regu = force HP
* Vaux2Regu = force off
*/
INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01),
/*
* Vaux3Regu = force off
*/
INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00),
/*
* Vaux1Sel = 2.8 V
*/
INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C),
/*
* Vaux2Sel = 2.9 V
*/
INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d),
/*
* Vaux3Sel = 2.91 V
*/
INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07),
/*
* VextSupply12LP = disabled (no LP)
*/
INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00),
/*
* Vaux1Disch = short discharge time
* Vaux2Disch = short discharge time
* Vaux3Disch = short discharge time
* Vintcore12Disch = short discharge time
* VTVoutDisch = short discharge time
* VaudioDisch = short discharge time
*/
INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00),
/*
* VanaDisch = short discharge time
* VdmicPullDownEna = pulldown disabled when Vdmic is disabled
* VdmicDisch = short discharge time
*/
INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00),
};
/* AB8500 regulators */
static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
/* supplies to the display/camera */
[AB8500_LDO_AUX1] = {
.supply_regulator = "ab8500-ext-supply3",
.constraints = {
.name = "V-DISPLAY",
.min_uV = 2800000,
.max_uV = 3300000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.boot_on = 1, /* display is on at boot */
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
.consumer_supplies = ab8500_vaux1_consumers,
},
/* supplies to the on-board eMMC */
[AB8500_LDO_AUX2] = {
.supply_regulator = "ab8500-ext-supply3",
.constraints = {
.name = "V-eMMC1",
.min_uV = 1100000,
.max_uV = 3300000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS |
REGULATOR_CHANGE_MODE,
.valid_modes_mask = REGULATOR_MODE_NORMAL |
REGULATOR_MODE_IDLE,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
.consumer_supplies = ab8500_vaux2_consumers,
},
/* supply for VAUX3, supplies to SDcard slots */
[AB8500_LDO_AUX3] = {
.supply_regulator = "ab8500-ext-supply3",
.constraints = {
.name = "V-MMC-SD",
.min_uV = 1100000,
.max_uV = 3300000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS |
REGULATOR_CHANGE_MODE,
.valid_modes_mask = REGULATOR_MODE_NORMAL |
REGULATOR_MODE_IDLE,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
.consumer_supplies = ab8500_vaux3_consumers,
},
/* supply for tvout, gpadc, TVOUT LDO */
[AB8500_LDO_TVOUT] = {
.constraints = {
.name = "V-TVOUT",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
.consumer_supplies = ab8500_vtvout_consumers,
},
/* supply for ab8500-vaudio, VAUDIO LDO */
[AB8500_LDO_AUDIO] = {
.constraints = {
.name = "V-AUD",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
.consumer_supplies = ab8500_vaud_consumers,
},
/* supply for v-anamic1 VAMic1-LDO */
[AB8500_LDO_ANAMIC1] = {
.constraints = {
.name = "V-AMIC1",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
.consumer_supplies = ab8500_vamic1_consumers,
},
/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
[AB8500_LDO_ANAMIC2] = {
.constraints = {
.name = "V-AMIC2",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
.consumer_supplies = ab8500_vamic2_consumers,
},
/* supply for v-dmic, VDMIC LDO */
[AB8500_LDO_DMIC] = {
.constraints = {
.name = "V-DMIC",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
.consumer_supplies = ab8500_vdmic_consumers,
},
/* supply for v-intcore12, VINTCORE12 LDO */
[AB8500_LDO_INTCORE] = {
.constraints = {
.name = "V-INTCORE",
.min_uV = 1250000,
.max_uV = 1350000,
.input_uV = 1800000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS |
REGULATOR_CHANGE_MODE |
REGULATOR_CHANGE_DRMS,
.valid_modes_mask = REGULATOR_MODE_NORMAL |
REGULATOR_MODE_IDLE,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
.consumer_supplies = ab8500_vintcore_consumers,
},
/* supply for U8500 CSI-DSI, VANA LDO */
[AB8500_LDO_ANA] = {
.constraints = {
.name = "V-CSI-DSI",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
.consumer_supplies = ab8500_vana_consumers,
},
};
/* supply for VextSupply3 */ /* supply for VextSupply3 */
static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = { static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = {
/* SIM supply for 3 V SIM cards */ /* SIM supply for 3 V SIM cards */
...@@ -465,15 +68,6 @@ static struct regulator_init_data ab8500_ext_regulators[] = { ...@@ -465,15 +68,6 @@ static struct regulator_init_data ab8500_ext_regulators[] = {
}, },
}; };
static struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
.reg_init = ab8500_reg_init,
.num_reg_init = ARRAY_SIZE(ab8500_reg_init),
.regulator = ab8500_regulators,
.num_regulator = ARRAY_SIZE(ab8500_regulators),
.ext_regulator = ab8500_ext_regulators,
.num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators),
};
/** /**
* struct ab8500_ext_regulator_info - ab8500 regulator information * struct ab8500_ext_regulator_info - ab8500 regulator information
* @dev: device pointer * @dev: device pointer
...@@ -788,7 +382,6 @@ static struct ab8500_ext_regulator_info ...@@ -788,7 +382,6 @@ static struct ab8500_ext_regulator_info
static int ab8500_ext_regulator_probe(struct platform_device *pdev) static int ab8500_ext_regulator_probe(struct platform_device *pdev)
{ {
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_regulator_platform_data *pdata = &ab8500_regulator_plat_data;
struct regulator_config config = { }; struct regulator_config config = { };
struct regulator_dev *rdev; struct regulator_dev *rdev;
int i; int i;
...@@ -798,12 +391,6 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev) ...@@ -798,12 +391,6 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev)
return -EINVAL; return -EINVAL;
} }
/* make sure the platform data has the correct size */
if (pdata->num_ext_regulator != ARRAY_SIZE(ab8500_ext_regulator_info)) {
dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
return -EINVAL;
}
/* check for AB8500 2.x */ /* check for AB8500 2.x */
if (is_ab8500_2p0_or_earlier(ab8500)) { if (is_ab8500_2p0_or_earlier(ab8500)) {
struct ab8500_ext_regulator_info *info; struct ab8500_ext_regulator_info *info;
...@@ -823,11 +410,11 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev) ...@@ -823,11 +410,11 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev)
info = &ab8500_ext_regulator_info[i]; info = &ab8500_ext_regulator_info[i];
info->dev = &pdev->dev; info->dev = &pdev->dev;
info->cfg = (struct ab8500_ext_regulator_cfg *) info->cfg = (struct ab8500_ext_regulator_cfg *)
pdata->ext_regulator[i].driver_data; ab8500_ext_regulators[i].driver_data;
config.dev = &pdev->dev; config.dev = &pdev->dev;
config.driver_data = info; config.driver_data = info;
config.init_data = &pdata->ext_regulator[i]; config.init_data = &ab8500_ext_regulators[i];
/* register regulator with framework */ /* register regulator with framework */
rdev = devm_regulator_register(&pdev->dev, &info->desc, rdev = devm_regulator_register(&pdev->dev, &info->desc,
......
include/linux/mfd/abx500/ab8500.h
View file @ c512150b
...@@ -368,7 +368,6 @@ struct ab8500 { ...@@ -368,7 +368,6 @@ struct ab8500 {
int it_latchhier_num; int it_latchhier_num;
}; };
struct ab8500_regulator_platform_data;
struct ab8500_codec_platform_data; struct ab8500_codec_platform_data;
struct ab8500_sysctrl_platform_data; struct ab8500_sysctrl_platform_data;
...@@ -376,11 +375,9 @@ struct ab8500_sysctrl_platform_data; ...@@ -376,11 +375,9 @@ struct ab8500_sysctrl_platform_data;
* struct ab8500_platform_data - AB8500 platform data * struct ab8500_platform_data - AB8500 platform data
* @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
* @init: board-specific initialization after detection of ab8500 * @init: board-specific initialization after detection of ab8500
* @regulator: machine-specific constraints for regulators
*/ */
struct ab8500_platform_data { struct ab8500_platform_data {
void (*init) (struct ab8500 *); void (*init) (struct ab8500 *);
struct ab8500_regulator_platform_data *regulator;
struct ab8500_codec_platform_data *codec; struct ab8500_codec_platform_data *codec;
struct ab8500_sysctrl_platform_data *sysctrl; struct ab8500_sysctrl_platform_data *sysctrl;
}; };
......
include/linux/regulator/ab8500.h
View file @ c512150b
...@@ -153,14 +153,4 @@ enum ab8500_ext_regulator_id { ...@@ -153,14 +153,4 @@ enum ab8500_ext_regulator_id {
AB8500_NUM_EXT_REGULATORS, AB8500_NUM_EXT_REGULATORS,
}; };
/* AB8500 regulator platform data */
struct ab8500_regulator_platform_data {
int num_reg_init;
struct ab8500_regulator_reg_init *reg_init;
int num_regulator;
struct regulator_init_data *regulator;
int num_ext_regulator;
struct regulator_init_data *ext_regulator;
};
#endif #endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7