Commit c57b4805 authored by Georg Acher's avatar Georg Acher Committed by Greg Kroah-Hartman

[PATCH] small fixes for usb-uhci-hcd

the attached patch for usb-uhci-hcd includes the possibility to specify the
FSBR-mode and depth-first-search-modes via module parameters. Thanks go to
Kevin (kjsisson@bellsouth.net) for this nice idea. He had problems with
stv0680-based cameras when using the default (breadth first) methods.

The interval-value for isochronous transfers is also now supported.

Additionally the patch removes a few typos, obsolete comments+code and
a few non-portable variable declarations.
parent c7d19c31
......@@ -5,7 +5,7 @@
Georg Acher + Deti Fliegl + Thomas Sailer
georg@acher.org deti@fliegl.de sailer@ife.ee.ethz.ch
$Id: usb-uhci-dbg.c,v 1.1 2002/05/14 20:36:57 acher Exp $
$Id: usb-uhci-dbg.c,v 1.2 2002/05/21 21:40:16 acher Exp $
*/
#ifdef DEBUG
......@@ -105,7 +105,7 @@ static void __attribute__((__unused__)) uhci_show_sc (int port, unsigned short s
void uhci_show_status (struct uhci_hcd *uhci)
{
unsigned int io_addr = (int)uhci->hcd.regs;
unsigned long io_addr = (unsigned long)uhci->hcd.regs;
unsigned short usbcmd, usbstat, usbint, usbfrnum;
unsigned int flbaseadd;
unsigned char sof;
......
......@@ -13,7 +13,7 @@
HW-initalization based on material of
Randy Dunlap + Johannes Erdfelt + Gregory P. Smith + Linus Torvalds
$Id: usb-uhci-hcd.c,v 1.1 2002/05/14 20:36:57 acher Exp $
$Id: usb-uhci-hcd.c,v 1.3 2002/05/25 16:42:41 acher Exp $
*/
#include <linux/config.h>
......@@ -37,7 +37,6 @@
#include <asm/byteorder.h>
#include <linux/usb.h>
#define CONFIG_USB_DEBUG
#ifdef CONFIG_USB_DEBUG
#define DEBUG
#else
......@@ -47,34 +46,34 @@
#include "../core/hcd.h"
#include "usb-uhci-hcd.h"
#define DRIVER_VERSION "$Revision: 1.1 $"
#define DRIVER_VERSION "$Revision: 1.3 $"
#define DRIVER_AUTHOR "Georg Acher, Deti Fliegl, Thomas Sailer"
#define DRIVER_DESC "USB 1.1 Universal Host Controller Interface driver (HCD)"
/*--------------------------------------------------------------------------*/
// Values you may tweak
/* CONFIG_USB_UHCI_HIGH_BANDWITH turns on Full Speed Bandwidth
* Reclamation: feature that puts loop on descriptor loop when
/*--------------------------------------------------------------------------*/
/* Values you may tweak with module parameters
*
* high_bw: 1=on (default), 0=off
* Turns on Full Speed Bandwidth Reclamation:
* Feature that puts a loop on the descriptor chain when
* there's some transfer going on. With FSBR, USB performance
* is optimal, but PCI can be slowed down up-to 5 times, slowing down
* system performance (eg. framebuffer devices).
*/
#define CONFIG_USB_UHCI_HIGH_BANDWIDTH
/* *_DEPTH_FIRST puts descriptor in depth-first mode. This has
* somehow similar effect to FSBR (higher speed), but does not
*
* bulk_depth/ctrl_depth: 0=off (default), 1:on
* Puts descriptors for bulk/control transfers in depth-first mode.
* This has somehow similar effect to FSBR (higher speed), but does not
* slow PCI down. OTOH USB performace is slightly slower than
* in FSBR case and single device could hog whole USB, starving
* other devices.
*/
#define USE_CTRL_DEPTH_FIRST 0 // 0: Breadth first, 1: Depth first
#define USE_BULK_DEPTH_FIRST 0 // 0: Breadth first, 1: Depth first
/* Turning off both CONFIG_USB_UHCI_HIGH_BANDWITH and *_DEPTH_FIRST
* other devices. Some devices (e.g. STV680-based cameras) NEED this depth
* first search to work properly.
*
* Turning off both high_bw and bulk_depth/ctrl_depth
* will lead to <64KB/sec performance over USB for bulk transfers targeting
* one device's endpoint. You probably do not want to do that.
*/
// Other constants, there's usually no need to change them.
// stop bandwidth reclamation after (roughly) 50ms
#define IDLE_TIMEOUT (HZ/20)
......@@ -100,6 +99,14 @@
// NO serviceable parts below!
/*--------------------------------------------------------------------------*/
/* Can be set by module parameters */
static int high_bw = 1;
static int ctrl_depth = 0; /* 0: Breadth first, 1: Depth first */
static int bulk_depth = 0; /* 0: Breadth first, 1: Depth first */
// How much URBs with ->next are walked
#define MAX_NEXT_COUNT 2048
static struct uhci *devs = NULL;
/* used by userspace UHCI data structure dumper */
......@@ -155,7 +162,6 @@ static int uhci_urb_enqueue (struct usb_hcd *hcd, struct urb *urb, int mem_flags
spin_lock_irqsave (&uhci->urb_list_lock, flags);
queued_urb = search_dev_ep (uhci, urb); // returns already queued urb for that pipe
if (queued_urb) {
......@@ -165,7 +171,7 @@ static int uhci_urb_enqueue (struct usb_hcd *hcd, struct urb *urb, int mem_flags
((type == PIPE_BULK) &&
(!(urb->transfer_flags & USB_QUEUE_BULK) || !(queued_urb->transfer_flags & USB_QUEUE_BULK)))) {
spin_unlock_irqrestore (&uhci->urb_list_lock, flags);
err("ENXIO (%s) %08x, flags %x, urb %p, burb %p, propably device driver bug...",
err("ENXIO (%s) %08x, flags %x, urb %p, burb %p, probably device driver bug...",
PIPESTRING(type),
urb->pipe,urb->transfer_flags,urb,queued_urb);
return -ENXIO; // urb already queued
......@@ -196,7 +202,7 @@ static int uhci_urb_enqueue (struct usb_hcd *hcd, struct urb *urb, int mem_flags
PCI_DMA_TODEVICE);
// for bulk queuing it is essential that interrupts are disabled until submission
// all other type enable interrupts again
// all other types enable interrupts again
switch (type) {
case PIPE_BULK:
if (queued_urb) {
......@@ -293,7 +299,7 @@ static int uhci_get_frame (struct usb_hcd *hcd)
/*--------------------------------------------------------------------------*/
static int hc_reset (struct uhci_hcd *uhci)
{
unsigned int io_addr = (int)uhci->hcd.regs;
unsigned long io_addr = (unsigned long)uhci->hcd.regs;
uhci->apm_state = 0;
uhci->running = 0;
......@@ -306,7 +312,7 @@ static int hc_reset (struct uhci_hcd *uhci)
/*--------------------------------------------------------------------------*/
static int hc_irq_run(struct uhci_hcd *uhci)
{
unsigned int io_addr = (int)uhci->hcd.regs;
unsigned long io_addr = (unsigned long)uhci->hcd.regs;
/* Turn on all interrupts */
outw (USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP, io_addr + USBINTR);
......@@ -324,7 +330,7 @@ static int hc_irq_run(struct uhci_hcd *uhci)
/*--------------------------------------------------------------------------*/
static int hc_start (struct uhci_hcd *uhci)
{
unsigned int io_addr = (int)uhci->hcd.regs;
unsigned long io_addr = (unsigned long)uhci->hcd.regs;
int timeout = 10;
struct usb_device *udev;
init_dbg("hc_start uhci %p",uhci);
......@@ -351,7 +357,6 @@ static int hc_start (struct uhci_hcd *uhci)
uhci->hcd.state = USB_STATE_READY;
if (!udev) {
uhci->running = 0;
// FIXME cleanup
return -ENOMEM;
}
......@@ -360,7 +365,6 @@ static int hc_start (struct uhci_hcd *uhci)
if (usb_register_root_hub (udev, &uhci->hcd.pdev->dev) != 0) {
usb_free_dev (udev);
uhci->running = 0;
// FIXME cleanup
return -ENODEV;
}
......@@ -374,7 +378,7 @@ static int __devinit uhci_start (struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci (hcd);
int ret;
int io_addr=(int)hcd->regs, io_size=0x20; // FIXME
unsigned long io_addr=(unsigned long)hcd->regs, io_size=0x20;
init_dbg("uhci_start hcd %p uhci %p, pdev %p",hcd,uhci,hcd->pdev);
/* disable legacy emulation, Linux takes over... */
......@@ -448,7 +452,7 @@ static void uhci_stop (struct usb_hcd *hcd)
static void uhci_irq (struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci (hcd);
unsigned int io_addr = (int)hcd->regs;
unsigned long io_addr = (unsigned long)hcd->regs;
unsigned short status;
struct list_head *p, *p2;
int restarts, work_done;
......@@ -589,6 +593,12 @@ static const struct hc_driver uhci_driver = {
MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_DESCRIPTION (DRIVER_INFO);
MODULE_LICENSE ("GPL");
MODULE_PARM (high_bw, "i");
MODULE_PARM_DESC (high_bw, "high_hw: Enable high bandwidth mode, 1=on (default), 0=off");
MODULE_PARM (bulk_depth, "i");
MODULE_PARM_DESC (bulk_depth, "bulk_depth: Depth first processing for bulk transfers, 0=off (default), 1=on");
MODULE_PARM (ctrl_depth, "i");
MODULE_PARM_DESC (ctrl_depth, "ctrl_depth: Depth first processing for control transfers, 0=off (default), 1=on");
static const struct pci_device_id __devinitdata pci_ids [] = { {
......@@ -627,6 +637,10 @@ static int __init uhci_hcd_init (void)
init_dbg (DRIVER_INFO);
init_dbg ("block sizes: hq %d td %d",
sizeof (struct qh), sizeof (struct td));
info("High bandwidth mode %s.%s%s",
high_bw?"enabled":"disabled",
ctrl_depth?"CTRL depth first enabled":"",
bulk_depth?"BULK depth first enabled":"");
return pci_module_init (&uhci_pci_driver);
}
......
......@@ -13,7 +13,7 @@
HW-initalization based on material of
Randy Dunlap + Johannes Erdfelt + Gregory P. Smith + Linus Torvalds
$Id: usb-uhci-hub.c,v 1.1 2002/05/14 20:36:57 acher Exp $
$Id: usb-uhci-hub.c,v 1.2 2002/05/21 21:40:16 acher Exp $
*/
#define CLR_RH_PORTSTAT(x) \
......@@ -34,7 +34,7 @@ static int oldval=-1;
static int uhci_hub_status_data (struct usb_hcd *hcd, char *buf)
{
struct uhci_hcd *uhci = hcd_to_uhci (hcd);
unsigned int io_addr = (int)uhci->hcd.regs;
unsigned long io_addr = (unsigned long)uhci->hcd.regs;
int i, len=0, data = 0, portstate;
int changed=0;
......@@ -99,7 +99,7 @@ static int uhci_hub_control (
int status = 0;
int stat = 0;
int cstatus;
unsigned int io_addr = (int)uhci->hcd.regs;
unsigned long io_addr = (unsigned long)uhci->hcd.regs;
int ports = uhci->maxports;
switch (typeReq) {
......
......@@ -14,7 +14,7 @@
HW-initalization based on material of
Randy Dunlap + Johannes Erdfelt + Gregory P. Smith + Linus Torvalds
$Id: usb-uhci-mem.c,v 1.1 2002/05/14 20:36:57 acher Exp $
$Id: usb-uhci-mem.c,v 1.3 2002/05/25 16:42:41 acher Exp $
*/
/*###########################################################################*/
......@@ -387,10 +387,9 @@ static void uhci_switch_timer_int(struct uhci_hcd *uhci)
wmb();
}
/*-------------------------------------------------------------------*/
#ifdef CONFIG_USB_UHCI_HIGH_BANDWIDTH
static void enable_desc_loop(struct uhci_hcd *uhci, struct urb *urb)
{
int flags;
unsigned long flags;
if (urb->transfer_flags & USB_NO_FSBR)
return;
......@@ -405,7 +404,7 @@ static void enable_desc_loop(struct uhci_hcd *uhci, struct urb *urb)
/*-------------------------------------------------------------------*/
static void disable_desc_loop(struct uhci_hcd *uhci, struct urb *urb)
{
int flags;
unsigned long flags;
if (urb->transfer_flags & USB_NO_FSBR)
return;
......@@ -422,18 +421,16 @@ static void disable_desc_loop(struct uhci_hcd *uhci, struct urb *urb)
}
spin_unlock_irqrestore (&uhci->qh_lock, flags);
}
#endif
/*-------------------------------------------------------------------*/
static void queue_urb_unlocked (struct uhci_hcd *uhci, struct urb *urb)
{
urb_priv_t *priv=(urb_priv_t*)urb->hcpriv;
#ifdef CONFIG_USB_UHCI_HIGH_BANDWIDTH
int type;
type=usb_pipetype (urb->pipe);
if ((type == PIPE_BULK) || (type == PIPE_CONTROL))
if (high_bw && ((type == PIPE_BULK) || (type == PIPE_CONTROL)))
enable_desc_loop(uhci, urb);
#endif
urb->status = -EINPROGRESS;
priv->started=jiffies;
......@@ -455,14 +452,12 @@ static void queue_urb (struct uhci_hcd *uhci, struct urb *urb)
static void dequeue_urb (struct uhci_hcd *uhci, struct urb *urb)
{
urb_priv_t *priv=(urb_priv_t*)urb->hcpriv;
#ifdef CONFIG_USB_UHCI_HIGH_BANDWIDTH
int type;
dbg("dequeue URB %p",urb);
type=usb_pipetype (urb->pipe);
if ((type == PIPE_BULK) || (type == PIPE_CONTROL))
if (high_bw && ((type == PIPE_BULK) || (type == PIPE_CONTROL)))
disable_desc_loop(uhci, urb);
#endif
list_del (&priv->urb_list);
if (urb->timeout && uhci->timeout_urbs)
......@@ -624,10 +619,10 @@ static int init_skel (struct uhci_hcd *uhci)
insert_qh (uhci, uhci->bulk_chain, qh, 0);
uhci->control_chain = qh;
#ifdef CONFIG_USB_UHCI_HIGH_BANDWIDTH
// disabled reclamation loop
set_qh_head(uhci->chain_end, uhci->control_chain->dma_addr | UHCI_PTR_QH | UHCI_PTR_TERM);
#endif
if (high_bw)
set_qh_head(uhci->chain_end, uhci->control_chain->dma_addr | UHCI_PTR_QH | UHCI_PTR_TERM);
init_dbg("allocating qh: ls_control_chain");
if (alloc_qh (uhci, &qh))
......
......@@ -13,7 +13,7 @@
HW-initalization based on material of
Randy Dunlap + Johannes Erdfelt + Gregory P. Smith + Linus Torvalds
$Id: usb-uhci-q.c,v 1.1 2002/05/14 20:36:57 acher Exp $
$Id: usb-uhci-q.c,v 1.3 2002/05/25 16:42:41 acher Exp $
*/
/*-------------------------------------------------------------------*/
......@@ -59,7 +59,7 @@ static int uhci_submit_control_urb (struct uhci_hcd *uhci, struct urb *urb)
urb_priv_t *urb_priv = urb->hcpriv;
unsigned long destination, status;
int maxsze = usb_maxpacket (urb->dev, urb->pipe, usb_pipeout (urb->pipe));
int depth_first=USE_CTRL_DEPTH_FIRST; // UHCI descriptor chasing method
int depth_first = ctrl_depth; // UHCI descriptor chasing method
unsigned long len;
char *data;
......@@ -175,7 +175,7 @@ static int uhci_submit_bulk_urb (struct uhci_hcd *uhci, struct urb *urb, struct
unsigned int pipe = urb->pipe;
int maxsze = usb_maxpacket (urb->dev, pipe, usb_pipeout (pipe));
int info, len, last;
int depth_first=USE_BULK_DEPTH_FIRST; // UHCI descriptor chasing method
int depth_first = bulk_depth; // UHCI descriptor chasing method
if (usb_endpoint_halted (urb->dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)))
return -EPIPE;
......@@ -305,7 +305,7 @@ static int uhci_submit_bulk_urb (struct uhci_hcd *uhci, struct urb *urb, struct
static int uhci_submit_int_urb (struct uhci_hcd *uhci, struct urb *urb)
{
urb_priv_t *urb_priv = urb->hcpriv;
int nint, n;
int nint;
uhci_desc_t *td;
int status, destination;
int info;
......@@ -313,16 +313,14 @@ static int uhci_submit_int_urb (struct uhci_hcd *uhci, struct urb *urb)
if (urb->interval == 0)
nint = 0;
else { // round interval down to 2^n
for (nint = 0, n = 1; nint <= 8; nint++, n += n)
if (urb->interval < n) {
urb->interval = n / 2;
break;
}
nint--;
else {
// log2-function (urb->interval already 2^n)
nint = ffs(urb->interval);
if (nint>7)
nint=7;
}
dbg("Rounded interval to %i, chain %i", urb->interval, nint);
dbg("INT-interval %i, chain %i", urb->interval, nint);
// remember start frame, just in case...
urb->start_frame = UHCI_GET_CURRENT_FRAME (uhci) & 1023;
......@@ -381,7 +379,7 @@ static int find_iso_limits (struct uhci_hcd *uhci, struct urb *urb, unsigned int
}
if (last_urb) {
*end = (last_urb->start_frame + last_urb->number_of_packets) & 1023;
*end = (last_urb->start_frame + last_urb->number_of_packets*last_urb->interval) & 1023;
ret=0;
}
......@@ -395,12 +393,14 @@ static int find_iso_limits (struct uhci_hcd *uhci, struct urb *urb, unsigned int
static int iso_find_start (struct uhci_hcd *uhci, struct urb *urb)
{
unsigned int now;
unsigned int start_limit = 0, stop_limit = 0, queued_size;
unsigned int start_limit = 0, stop_limit = 0, queued_size, number_of_frames;
int limits;
now = UHCI_GET_CURRENT_FRAME (uhci) & 1023;
if ((unsigned) urb->number_of_packets > 900)
number_of_frames = (unsigned) (urb->number_of_packets*urb->interval);
if ( number_of_frames > 900)
return -EFBIG;
limits = find_iso_limits (uhci, urb, &start_limit, &stop_limit);
......@@ -415,17 +415,17 @@ static int iso_find_start (struct uhci_hcd *uhci, struct urb *urb)
else {
urb->start_frame = stop_limit; // seamless linkage
if (((now - urb->start_frame) & 1023) <= (unsigned) urb->number_of_packets) {
if (((now - urb->start_frame) & 1023) <= (unsigned) number_of_frames) {
info("iso_find_start: gap in seamless isochronous scheduling");
dbg("iso_find_start: now %u start_frame %u number_of_packets %u pipe 0x%08x",
now, urb->start_frame, urb->number_of_packets, urb->pipe);
dbg("iso_find_start: now %u start_frame %u number_of_packets %u interval %u pipe 0x%08x",
now, urb->start_frame, urb->number_of_packets, urb->interval, urb->pipe);
urb->start_frame = (now + 5) & 1023; // 5ms setup should be enough
}
}
}
else {
urb->start_frame &= 1023;
if (((now - urb->start_frame) & 1023) < (unsigned) urb->number_of_packets) {
if (((now - urb->start_frame) & 1023) < number_of_frames) {
dbg("iso_find_start: now between start_frame and end");
return -EAGAIN;
}
......@@ -436,7 +436,7 @@ static int iso_find_start (struct uhci_hcd *uhci, struct urb *urb)
return 0;
if (((urb->start_frame - start_limit) & 1023) < queued_size ||
((urb->start_frame + urb->number_of_packets - 1 - start_limit) & 1023) < queued_size) {
((urb->start_frame + number_of_frames - 1 - start_limit) & 1023) < queued_size) {
dbg("iso_find_start: start_frame %u number_of_packets %u start_limit %u stop_limit %u",
urb->start_frame, urb->number_of_packets, start_limit, stop_limit);
return -EAGAIN;
......@@ -507,7 +507,7 @@ static int uhci_submit_iso_urb (struct uhci_hcd *uhci, struct urb *urb, int mem_
urb_priv->transfer_buffer_dma + urb->iso_frame_desc[n].offset);
list_add_tail (&td->desc_list, &urb_priv->desc_list);
insert_td_horizontal (uhci, uhci->iso_td[(urb->start_frame + n) & 1023], td); // store in iso-tds
insert_td_horizontal (uhci, uhci->iso_td[(urb->start_frame + n*urb->interval) & 1023], td); // store in iso-tds
}
kfree (tdm);
......@@ -742,6 +742,7 @@ static int uhci_unlink_urb_async (struct uhci_hcd *uhci, struct urb *urb, int mo
switch (usb_pipetype (urb->pipe)) {
case PIPE_INTERRUPT:
urb_priv->flags = 0; // mark as deleted (if called from completion)
uhci_do_toggle (urb);
case PIPE_ISOCHRONOUS:
......@@ -853,12 +854,9 @@ static void uhci_check_timeouts(struct uhci_hcd *uhci)
async_dbg("uhci_check_timeout: timeout for %p",urb);
uhci_unlink_urb_async(uhci, urb, UNLINK_ASYNC_STORE_URB);
}
#ifdef CONFIG_USB_UHCI_HIGH_BANDWIDTH
else if (((type == PIPE_BULK) || (type == PIPE_CONTROL)) &&
else if (high_bw && ((type == PIPE_BULK) || (type == PIPE_CONTROL)) &&
(hcpriv->use_loop) && time_after(jiffies, hcpriv->started + IDLE_TIMEOUT))
disable_desc_loop(uhci, urb);
#endif
}
uhci->timeout_check=jiffies;
}
......@@ -1040,9 +1038,8 @@ static int process_transfer (struct uhci_hcd *uhci, struct urb *urb, int mode)
uhci_clean_transfer(uhci, urb, qh, mode);
urb->status = status;
#ifdef CONFIG_USB_UHCI_HIGH_BANDWIDTH
disable_desc_loop(uhci,urb);
#endif
if (high_bw)
disable_desc_loop(uhci,urb);
dbg("process_transfer: (end) urb %p, wanted len %d, len %d status %x err %d",
urb,urb->transfer_buffer_length,urb->actual_length, urb->status, urb->error_count);
......@@ -1088,21 +1085,19 @@ static int process_interrupt (struct uhci_hcd *uhci, struct urb *urb, int mode)
urb->actual_length = actual_length;
recycle:
((urb_priv_t*)urb->hcpriv)->flags=1; // set to detect unlink during completion
uhci_urb_dma_sync(uhci, urb, urb->hcpriv);
if (urb->complete) {
//dbg("process_interrupt: calling completion, status %i",status);
urb->status = status;
((urb_priv_t*)urb->hcpriv)->flags=1; // if unlink_urb is called during completion
spin_unlock(&uhci->urb_list_lock);
urb->complete ((struct urb *) urb);
spin_lock(&uhci->urb_list_lock);
((urb_priv_t*)urb->hcpriv)->flags=0; // FIXME: unlink in completion not handled...
}
if ((urb->status != -ECONNABORTED) && (urb->status != ECONNRESET) &&
(urb->status != -ENOENT)) {
(urb->status != -ENOENT) && ((urb_priv_t*)urb->hcpriv)->flags) {
urb->status = -EINPROGRESS;
......@@ -1125,7 +1120,7 @@ static int process_interrupt (struct uhci_hcd *uhci, struct urb *urb, int mode)
mb();
}
else {
uhci_unlink_urb_async(uhci, urb, UNLINK_ASYNC_STORE_URB);
uhci_unlink_urb_async(uhci, urb, UNLINK_ASYNC_STORE_URB);
uhci_do_toggle (urb); // correct toggle after unlink
clr_td_ioc(desc); // inactivate TD
}
......@@ -1199,7 +1194,6 @@ static int process_iso (struct uhci_hcd *uhci, struct urb *urb, int mode)
p_tmp = p;
p = p->next;
list_del (p_tmp);
// delete_desc (uhci, desc);
// add to cool down pool
INIT_LIST_HEAD(&desc->horizontal);
......@@ -1243,19 +1237,18 @@ static int process_urb (struct uhci_hcd *uhci, struct list_head *p)
break;
}
if (urb->status != -EINPROGRESS) {
if (urb->status != -EINPROGRESS && type != PIPE_INTERRUPT) {
dequeue_urb (uhci, urb);
uhci_free_priv(uhci, urb, urb->hcpriv);
uhci_free_priv(uhci, urb, urb->hcpriv);
spin_unlock(&uhci->urb_list_lock);
dbg("giveback urb %p, status %i, length %i\n",
urb, urb->status, urb->transfer_buffer_length);
usb_hcd_giveback_urb(&uhci->hcd, urb);
spin_lock(&uhci->urb_list_lock);
if (type != PIPE_INTERRUPT) { // process_interrupt does completion on its own
spin_unlock(&uhci->urb_list_lock);
dbg("giveback urb %p, status %i, length %i\n",
urb, urb->status, urb->transfer_buffer_length);
usb_hcd_giveback_urb(&uhci->hcd, urb);
spin_lock(&uhci->urb_list_lock);
}
}
return ret;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment