Merge branch 'pci/arm64-acpi' into next

* pci/arm64-acpi:
  ARM64: PCI: Support ACPI-based PCI host controller
  ARM64: PCI: Implement AML accessors for PCI_Config region
  ARM64: PCI: ACPI support for legacy IRQs parsing and consolidation with DT code
  ARM64: PCI: Add acpi_pci_bus_find_domain_nr()
  PCI: Factor DT-specific pci_bus_find_domain_nr() code out
  PCI: Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC
  PCI/ACPI: Add generic MCFG table handling
  PCI/ACPI: Support I/O resources when parsing host bridge resources
  PCI: Add pci_unmap_iospace() to unmap I/O resources
  PCI: Add parent device field to ECAM struct pci_config_window
  PCI: Move ecam.h to linux/include/pci-ecam.h

arch/arm64/Kconfig

@@ -3,6 +3,7 @@ config ARM64
 	select ACPI_CCA_REQUIRED if ACPI
 	select ACPI_GENERIC_GSI if ACPI
 	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
+	select ACPI_MCFG if ACPI
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAS_ELF_RANDOMIZE
@@ -96,6 +97,7 @@ config ARM64
 	select OF_EARLY_FLATTREE
 	select OF_NUMA if NUMA && OF
 	select OF_RESERVED_MEM
+	select PCI_ECAM if ACPI
 	select PERF_USE_VMALLOC
 	select POWER_RESET
 	select POWER_SUPPLY

arch/arm64/kernel/pci.c

@@ -17,6 +17,9 @@
 #include <linux/mm.h>
 #include <linux/of_pci.h>
 #include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
 #include <linux/slab.h>
 
 /*
@@ -50,11 +53,16 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 }
 
 /*
- * Try to assign the IRQ number from DT when adding a new device
+ * Try to assign the IRQ number when probing a new device
  */
-int pcibios_add_device(struct pci_dev *dev)
+int pcibios_alloc_irq(struct pci_dev *dev)
 {
-	dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+	if (acpi_disabled)
+		dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+#ifdef CONFIG_ACPI
+	else
+		return acpi_pci_irq_enable(dev);
+#endif
 
 	return 0;
 }
@@ -65,13 +73,21 @@ int pcibios_add_device(struct pci_dev *dev)
 int raw_pci_read(unsigned int domain, unsigned int bus,
 		  unsigned int devfn, int reg, int len, u32 *val)
 {
-	return -ENXIO;
+	struct pci_bus *b = pci_find_bus(domain, bus);
+
+	if (!b)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	return b->ops->read(b, devfn, reg, len, val);
 }
 
 int raw_pci_write(unsigned int domain, unsigned int bus,
 		unsigned int devfn, int reg, int len, u32 val)
 {
-	return -ENXIO;
+	struct pci_bus *b = pci_find_bus(domain, bus);
+
+	if (!b)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	return b->ops->write(b, devfn, reg, len, val);
 }
 
 #ifdef CONFIG_NUMA
@@ -85,10 +101,124 @@ EXPORT_SYMBOL(pcibus_to_node);
 #endif
 
 #ifdef CONFIG_ACPI
-/* Root bridge scanning */
+
+struct acpi_pci_generic_root_info {
+	struct acpi_pci_root_info	common;
+	struct pci_config_window	*cfg;	/* config space mapping */
+};
+
+int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
+{
+	struct pci_config_window *cfg = bus->sysdata;
+	struct acpi_device *adev = to_acpi_device(cfg->parent);
+	struct acpi_pci_root *root = acpi_driver_data(adev);
+
+	return root->segment;
+}
+
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	if (!acpi_disabled) {
+		struct pci_config_window *cfg = bridge->bus->sysdata;
+		struct acpi_device *adev = to_acpi_device(cfg->parent);
+		ACPI_COMPANION_SET(&bridge->dev, adev);
+	}
+
+	return 0;
+}
+
+/*
+ * Lookup the bus range for the domain in MCFG, and set up config space
+ * mapping.
+ */
+static struct pci_config_window *
+pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
+{
+	struct resource *bus_res = &root->secondary;
+	u16 seg = root->segment;
+	struct pci_config_window *cfg;
+	struct resource cfgres;
+	unsigned int bsz;
+
+	/* Use address from _CBA if present, otherwise lookup MCFG */
+	if (!root->mcfg_addr)
+		root->mcfg_addr = pci_mcfg_lookup(seg, bus_res);
+
+	if (!root->mcfg_addr) {
+		dev_err(&root->device->dev, "%04x:%pR ECAM region not found\n",
+			seg, bus_res);
+		return NULL;
+	}
+
+	bsz = 1 << pci_generic_ecam_ops.bus_shift;
+	cfgres.start = root->mcfg_addr + bus_res->start * bsz;
+	cfgres.end = cfgres.start + resource_size(bus_res) * bsz - 1;
+	cfgres.flags = IORESOURCE_MEM;
+	cfg = pci_ecam_create(&root->device->dev, &cfgres, bus_res,
+			      &pci_generic_ecam_ops);
+	if (IS_ERR(cfg)) {
+		dev_err(&root->device->dev, "%04x:%pR error %ld mapping ECAM\n",
+			seg, bus_res, PTR_ERR(cfg));
+		return NULL;
+	}
+
+	return cfg;
+}
+
+/* release_info: free resources allocated by init_info */
+static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
+{
+	struct acpi_pci_generic_root_info *ri;
+
+	ri = container_of(ci, struct acpi_pci_generic_root_info, common);
+	pci_ecam_free(ri->cfg);
+	kfree(ri);
+}
+
+static struct acpi_pci_root_ops acpi_pci_root_ops = {
+	.release_info = pci_acpi_generic_release_info,
+};
+
+/* Interface called from ACPI code to setup PCI host controller */
 struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
 {
-	/* TODO: Should be revisited when implementing PCI on ACPI */
-	return NULL;
+	int node = acpi_get_node(root->device->handle);
+	struct acpi_pci_generic_root_info *ri;
+	struct pci_bus *bus, *child;
+
+	ri = kzalloc_node(sizeof(*ri), GFP_KERNEL, node);
+	if (!ri)
+		return NULL;
+
+	ri->cfg = pci_acpi_setup_ecam_mapping(root);
+	if (!ri->cfg) {
+		kfree(ri);
+		return NULL;
+	}
+
+	acpi_pci_root_ops.pci_ops = &ri->cfg->ops->pci_ops;
+	bus = acpi_pci_root_create(root, &acpi_pci_root_ops, &ri->common,
+				   ri->cfg);
+	if (!bus)
+		return NULL;
+
+	pci_bus_size_bridges(bus);
+	pci_bus_assign_resources(bus);
+
+	list_for_each_entry(child, &bus->children, node)
+		pcie_bus_configure_settings(child);
+
+	return bus;
+}
+
+void pcibios_add_bus(struct pci_bus *bus)
+{
+	acpi_pci_add_bus(bus);
 }
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+	acpi_pci_remove_bus(bus);
+}
+
 #endif

drivers/acpi/Kconfig

@@ -217,6 +217,9 @@ config ACPI_PROCESSOR_IDLE
 	bool
 	select CPU_IDLE
 
+config ACPI_MCFG
+	bool
+
 config ACPI_CPPC_LIB
 	bool
 	depends on ACPI_PROCESSOR

drivers/acpi/Makefile

@@ -40,6 +40,7 @@ acpi-$(CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC) += processor_pdc.o
 acpi-y				+= ec.o
 acpi-$(CONFIG_ACPI_DOCK)	+= dock.o
 acpi-y				+= pci_root.o pci_link.o pci_irq.o
+obj-$(CONFIG_ACPI_MCFG)		+= pci_mcfg.o
 acpi-y				+= acpi_lpss.o acpi_apd.o
 acpi-y				+= acpi_platform.o
 acpi-y				+= acpi_pnp.o

drivers/acpi/pci_mcfg.c

+/*
+ * Copyright (C) 2016 Broadcom
+ *	Author: Jayachandran C <jchandra@broadcom.com>
+ * Copyright (C) 2016 Semihalf
+ * 	Author: Tomasz Nowicki <tn@semihalf.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License version 2 (GPLv2) for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 (GPLv2) along with this source code.
+ */
+
+#define pr_fmt(fmt) "ACPI: " fmt
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+
+/* Structure to hold entries from the MCFG table */
+struct mcfg_entry {
+	struct list_head	list;
+	phys_addr_t		addr;
+	u16			segment;
+	u8			bus_start;
+	u8			bus_end;
+};
+
+/* List to save MCFG entries */
+static LIST_HEAD(pci_mcfg_list);
+
+phys_addr_t pci_mcfg_lookup(u16 seg, struct resource *bus_res)
+{
+	struct mcfg_entry *e;
+
+	/*
+	 * We expect exact match, unless MCFG entry end bus covers more than
+	 * specified by caller.
+	 */
+	list_for_each_entry(e, &pci_mcfg_list, list) {
+		if (e->segment == seg && e->bus_start == bus_res->start &&
+		    e->bus_end >= bus_res->end)
+			return e->addr;
+	}
+
+	return 0;
+}
+
+static __init int pci_mcfg_parse(struct acpi_table_header *header)
+{
+	struct acpi_table_mcfg *mcfg;
+	struct acpi_mcfg_allocation *mptr;
+	struct mcfg_entry *e, *arr;
+	int i, n;
+
+	if (header->length < sizeof(struct acpi_table_mcfg))
+		return -EINVAL;
+
+	n = (header->length - sizeof(struct acpi_table_mcfg)) /
+					sizeof(struct acpi_mcfg_allocation);
+	mcfg = (struct acpi_table_mcfg *)header;
+	mptr = (struct acpi_mcfg_allocation *) &mcfg[1];
+
+	arr = kcalloc(n, sizeof(*arr), GFP_KERNEL);
+	if (!arr)
+		return -ENOMEM;
+
+	for (i = 0, e = arr; i < n; i++, mptr++, e++) {
+		e->segment = mptr->pci_segment;
+		e->addr =  mptr->address;
+		e->bus_start = mptr->start_bus_number;
+		e->bus_end = mptr->end_bus_number;
+		list_add(&e->list, &pci_mcfg_list);
+	}
+
+	pr_info("MCFG table detected, %d entries\n", n);
+	return 0;
+}
+
+/* Interface called by ACPI - parse and save MCFG table */
+void __init pci_mmcfg_late_init(void)
+{
+	int err = acpi_table_parse(ACPI_SIG_MCFG, pci_mcfg_parse);
+	if (err)
+		pr_err("Failed to parse MCFG (%d)\n", err);
+}

drivers/acpi/pci_root.c

@@ -720,6 +720,36 @@ static void acpi_pci_root_validate_resources(struct device *dev,
 	}
 }
 
+static void acpi_pci_root_remap_iospace(struct resource_entry *entry)
+{
+#ifdef PCI_IOBASE
+	struct resource *res = entry->res;
+	resource_size_t cpu_addr = res->start;
+	resource_size_t pci_addr = cpu_addr - entry->offset;
+	resource_size_t length = resource_size(res);
+	unsigned long port;
+
+	if (pci_register_io_range(cpu_addr, length))
+		goto err;
+
+	port = pci_address_to_pio(cpu_addr);
+	if (port == (unsigned long)-1)
+		goto err;
+
+	res->start = port;
+	res->end = port + length - 1;
+	entry->offset = port - pci_addr;
+
+	if (pci_remap_iospace(res, cpu_addr) < 0)
+		goto err;
+
+	pr_info("Remapped I/O %pa to %pR\n", &cpu_addr, res);
+	return;
+err:
+	res->flags |= IORESOURCE_DISABLED;
+#endif
+}
+
 int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info)
 {
 	int ret;
@@ -740,6 +770,9 @@ int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info)
 			"no IO and memory resources present in _CRS\n");
 	else {
 		resource_list_for_each_entry_safe(entry, tmp, list) {
+			if (entry->res->flags & IORESOURCE_IO)
+				acpi_pci_root_remap_iospace(entry);
+
 			if (entry->res->flags & IORESOURCE_DISABLED)
 				resource_list_destroy_entry(entry);
 			else
@@ -811,6 +844,8 @@ static void acpi_pci_root_release_info(struct pci_host_bridge *bridge)
 
 	resource_list_for_each_entry(entry, &bridge->windows) {
 		res = entry->res;
+		if (res->flags & IORESOURCE_IO)
+			pci_unmap_iospace(res);
 		if (res->parent &&
 		    (res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
 			release_resource(res);

drivers/pci/ecam.c

@@ -19,10 +19,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/pci-ecam.h>
 #include <linux/slab.h>
 
-#include "ecam.h"
-
 /*
  * On 64-bit systems, we do a single ioremap for the whole config space
  * since we have enough virtual address range available.  On 32-bit, we
@@ -52,6 +51,7 @@ struct pci_config_window *pci_ecam_create(struct device *dev,
 	if (!cfg)
 		return ERR_PTR(-ENOMEM);
 
+	cfg->parent = dev;
 	cfg->ops = ops;
 	cfg->busr.start = busr->start;
 	cfg->busr.end = busr->end;
@@ -95,7 +95,7 @@ struct pci_config_window *pci_ecam_create(struct device *dev,
 	}
 
 	if (ops->init) {
-		err = ops->init(dev, cfg);
+		err = ops->init(cfg);
 		if (err)
 			goto err_exit;
 	}

drivers/pci/host/pci-host-common.c

@@ -20,10 +20,9 @@
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
+#include <linux/pci-ecam.h>
 #include <linux/platform_device.h>
 
-#include "../ecam.h"
-
 static int gen_pci_parse_request_of_pci_ranges(struct device *dev,
 		       struct list_head *resources, struct resource **bus_range)
 {

drivers/pci/host/pci-host-generic.c

@@ -23,10 +23,9 @@
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
+#include <linux/pci-ecam.h>
 #include <linux/platform_device.h>
 
-#include "../ecam.h"
-
 static struct pci_ecam_ops gen_pci_cfg_cam_bus_ops = {
 	.bus_shift	= 16,
 	.pci_ops	= {

drivers/pci/host/pci-thunder-ecam.c

@@ -11,10 +11,9 @@
 #include <linux/ioport.h>
 #include <linux/of_pci.h>
 #include <linux/of.h>
+#include <linux/pci-ecam.h>
 #include <linux/platform_device.h>
 
-#include "../ecam.h"
-
 static void set_val(u32 v, int where, int size, u32 *val)
 {
 	int shift = (where & 3) * 8;

drivers/pci/host/pci-thunder-pem.c

@@ -18,10 +18,9 @@
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
+#include <linux/pci-ecam.h>
 #include <linux/platform_device.h>
 
-#include "../ecam.h"
-
 #define PEM_CFG_WR 0x28
 #define PEM_CFG_RD 0x30
 
@@ -285,8 +284,9 @@ static int thunder_pem_config_write(struct pci_bus *bus, unsigned int devfn,
 	return pci_generic_config_write(bus, devfn, where, size, val);
 }
 
-static int thunder_pem_init(struct device *dev, struct pci_config_window *cfg)
+static int thunder_pem_init(struct pci_config_window *cfg)
 {
+	struct device *dev = cfg->parent;
 	resource_size_t bar4_start;
 	struct resource *res_pem;
 	struct thunder_pem_pci *pem_pci;

drivers/pci/pci.c

@@ -7,6 +7,7 @@
  *	Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz>
  */
 
+#include <linux/acpi.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/init.h>
@@ -25,6 +26,7 @@
 #include <linux/device.h>
 #include <linux/pm_runtime.h>
 #include <linux/pci_hotplug.h>
+#include <linux/vmalloc.h>
 #include <asm/setup.h>
 #include <linux/aer.h>
 #include "pci.h"
@@ -3165,6 +3167,23 @@ int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
 #endif
 }
 
+/**
+ *	pci_unmap_iospace - Unmap the memory mapped I/O space
+ *	@res: resource to be unmapped
+ *
+ *	Unmap the CPU virtual address @res from virtual address space.
+ *	Only architectures that have memory mapped IO functions defined
+ *	(and the PCI_IOBASE value defined) should call this function.
+ */
+void pci_unmap_iospace(struct resource *res)
+{
+#if defined(PCI_IOBASE) && defined(CONFIG_MMU)
+	unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start;
+
+	unmap_kernel_range(vaddr, resource_size(res));
+#endif
+}
+
 static void __pci_set_master(struct pci_dev *dev, bool enable)
 {
 	u16 old_cmd, cmd;
@@ -4923,7 +4942,7 @@ int pci_get_new_domain_nr(void)
 }
 
 #ifdef CONFIG_PCI_DOMAINS_GENERIC
-void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent)
+static int of_pci_bus_find_domain_nr(struct device *parent)
 {
 	static int use_dt_domains = -1;
 	int domain = -1;
@@ -4967,7 +4986,13 @@ void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent)
 		domain = -1;
 	}
 
-	bus->domain_nr = domain;
+	return domain;
+}
+
+int pci_bus_find_domain_nr(struct pci_bus *bus, struct device *parent)
+{
+	return acpi_disabled ? of_pci_bus_find_domain_nr(parent) :
+			       acpi_pci_bus_find_domain_nr(bus);
 }
 #endif
 #endif

drivers/pci/probe.c

@@ -2127,7 +2127,9 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
 	b->sysdata = sysdata;
 	b->ops = ops;
 	b->number = b->busn_res.start = bus;
-	pci_bus_assign_domain_nr(b, parent);
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+	b->domain_nr = pci_bus_find_domain_nr(b, parent);
+#endif
 	b2 = pci_find_bus(pci_domain_nr(b), bus);
 	if (b2) {
 		/* If we already got to this bus through a different bridge, ignore it */

include/linux/pci-acpi.h

@@ -24,6 +24,8 @@ static inline acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
 }
 extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
 
+extern phys_addr_t pci_mcfg_lookup(u16 domain, struct resource *bus_res);
+
 static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
 {
 	struct pci_bus *pbus = pdev->bus;

drivers/pci/ecam.h → include/linux/pci-ecam.h

@@ -27,8 +27,7 @@ struct pci_config_window;
 struct pci_ecam_ops {
 	unsigned int			bus_shift;
 	struct pci_ops			pci_ops;
-	int				(*init)(struct device *,
-						struct pci_config_window *);
+	int				(*init)(struct pci_config_window *);
 };
 
 /*
@@ -45,6 +44,7 @@ struct pci_config_window {
 		void __iomem		*win;	/* 64-bit single mapping */
 		void __iomem		**winp; /* 32-bit per-bus mapping */
 	};
+	struct device			*parent;/* ECAM res was from this dev */
 };
 
 /* create and free pci_config_window */

include/linux/pci.h

@@ -1167,6 +1167,7 @@ int pci_register_io_range(phys_addr_t addr, resource_size_t size);
 unsigned long pci_address_to_pio(phys_addr_t addr);
 phys_addr_t pci_pio_to_address(unsigned long pio);
 int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr);
+void pci_unmap_iospace(struct resource *res);
 
 static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar)
 {
@@ -1389,12 +1390,13 @@ static inline int pci_domain_nr(struct pci_bus *bus)
 {
 	return bus->domain_nr;
 }
-void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent);
+#ifdef CONFIG_ACPI
+int acpi_pci_bus_find_domain_nr(struct pci_bus *bus);
 #else
-static inline void pci_bus_assign_domain_nr(struct pci_bus *bus,
-					struct device *parent)
-{
-}
+static inline int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
+{ return 0; }
+#endif
+int pci_bus_find_domain_nr(struct pci_bus *bus, struct device *parent);
 #endif
 
 /* some architectures require additional setup to direct VGA traffic */
@@ -1722,7 +1724,7 @@ void pcibios_free_irq(struct pci_dev *dev);
 extern struct dev_pm_ops pcibios_pm_ops;
 #endif
 
-#ifdef CONFIG_PCI_MMCONFIG
+#if defined(CONFIG_PCI_MMCONFIG) || defined(CONFIG_ACPI_MCFG)
 void __init pci_mmcfg_early_init(void);
 void __init pci_mmcfg_late_init(void);
 #else