arm64: dts: qcom: sm8150: Fix the base addresses of LLCC banks

The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-8-manivannan.sadhasivam@linaro.org

arch/arm64/boot/dts/qcom/sm8150.dtsi

@@ -1794,8 +1794,11 @@ mmss_noc: interconnect@1740000 {
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sm8150-llcc";
-			reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
+			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
+			      <0 0x09600000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};