ASoC: tlv320aic31xx: Handle BCLK set as PLL input configuration

If BCLK is used as PLL input, the sysclk is determined by the hw
params. So it must be updated here to match the input frequency, based
on sample rate, format and channels.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/r/20211119153248.419802-5-ariel.dalessandro@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/tlv320aic31xx.c

@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/i2c.h>
@@ -169,6 +170,7 @@ struct aic31xx_priv {
 	struct regulator_bulk_data supplies[AIC31XX_NUM_SUPPLIES];
 	struct aic31xx_disable_nb disable_nb[AIC31XX_NUM_SUPPLIES];
 	struct snd_soc_jack *jack;
+	u32 sysclk_id;
 	unsigned int sysclk;
 	u8 p_div;
 	int rate_div_line;
@@ -962,6 +964,7 @@ static int aic31xx_hw_params(struct snd_pcm_substream *substream,
 			     struct snd_soc_dai *dai)
 {
 	struct snd_soc_component *component = dai->component;
+	struct aic31xx_priv *aic31xx = snd_soc_component_get_drvdata(component);
 	u8 data = 0;
 
 	dev_dbg(component->dev, "## %s: width %d rate %d\n",
@@ -993,6 +996,16 @@ static int aic31xx_hw_params(struct snd_pcm_substream *substream,
 			    AIC31XX_IFACE1_DATALEN_MASK,
 			    data);
 
+	/*
+	 * If BCLK is used as PLL input, the sysclk is determined by the hw
+	 * params. So it must be updated here to match the input frequency.
+	 */
+	if (aic31xx->sysclk_id == AIC31XX_PLL_CLKIN_BCLK) {
+		aic31xx->sysclk = params_rate(params) * params_width(params) *
+				  params_channels(params);
+		aic31xx->p_div = 1;
+	}
+
 	return aic31xx_setup_pll(component, params);
 }
 
@@ -1177,6 +1190,7 @@ static int aic31xx_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 	snd_soc_component_update_bits(component, AIC31XX_CLKMUX, AIC31XX_PLL_CLKIN_MASK,
 			    clk_id << AIC31XX_PLL_CLKIN_SHIFT);
 
+	aic31xx->sysclk_id = clk_id;
 	aic31xx->sysclk = freq;
 
 	return 0;