Commit c5fa4fdc authored by Viresh Kumar's avatar Viresh Kumar Committed by Arnd Bergmann

ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture

This patch adds a generic target for SPEAr3xx machines that can be configured
via the device-tree. Currently the following devices are supported via the
devicetree:

- VIC interrupts
- PL011 UART
- PL061 GPIO
- PL110 CLCD
- SP805 WDT
- Synopsys DW I2C
- Synopsys DW ethernet
- ST FSMC-NAND
- ST SPEAR-SMI
- ST SPEAR-KEYBOARD
- ST SPEAR-RTC
- ARASAN SDHCI-SPEAR
- SPEAR-EHCI
- SPEAR-OHCI

Other peripheral devices will follow in later patches.

This also removes IO_ADDRESS macro and creates 16 MB static mappings instead of
4K for individual peripherals. This is done to have efficient TLB lookup for any
I/O windows that are located closely together. ioremap() on this range will
return this mapping only instead of creating another.
Signed-off-by: default avatarViresh Kumar <viresh.kumar@st.com>
parent 5fb00f96
......@@ -17,14 +17,14 @@ Introduction
SPEAr (Platform)
- SPEAr3XX (3XX SOC series, based on ARM9)
- SPEAr300 (SOC)
- SPEAr300_EVB (Evaluation Board)
- SPEAr300 Evaluation Board
- SPEAr310 (SOC)
- SPEAr310_EVB (Evaluation Board)
- SPEAr310 Evaluation Board
- SPEAr320 (SOC)
- SPEAr320_EVB (Evaluation Board)
- SPEAr320 Evaluation Board
- SPEAr6XX (6XX SOC series, based on ARM9)
- SPEAr600 (SOC)
- SPEAr600_EVB (Evaluation Board)
- SPEAr600 Evaluation Board
- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
- SPEAr1300 (SOC)
......@@ -51,10 +51,11 @@ Introduction
Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
mach-spear* also contains board specific files for each machine type.
mach-spear* doesn't contains board specific files as they fully support
Flattened Device Tree.
Document Author
---------------
Viresh Kumar, (c) 2010 ST Microelectronics
Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics
......@@ -6,3 +6,21 @@ Boards with the ST SPEAr600 SoC shall have the following properties:
Required root node property:
compatible = "st,spear600";
Boards with the ST SPEAr300 SoC shall have the following properties:
Required root node property:
compatible = "st,spear300";
Boards with the ST SPEAr310 SoC shall have the following properties:
Required root node property:
compatible = "st,spear310";
Boards with the ST SPEAr320 SoC shall have the following properties:
Required root node property:
compatible = "st,spear320";
/*
* DTS file for SPEAr300 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "spear300.dtsi"
/ {
model = "ST SPEAr300 Evaluation Board";
compatible = "st,spear300-evb", "st,spear300";
#address-cells = <1>;
#size-cells = <1>;
memory {
reg = <0 0x40000000>;
};
ahb {
clcd@60000000 {
status = "okay";
};
fsmc: flash@94000000 {
status = "okay";
};
gmac: eth@e0800000 {
status = "okay";
};
sdhci@70000000 {
int-gpio = <&gpio1 0 0>;
power-gpio = <&gpio1 2 1>;
status = "okay";
};
smi: flash@fc000000 {
status = "okay";
};
spi0: spi@d0100000 {
status = "okay";
};
ehci@e1800000 {
status = "okay";
};
ohci@e1900000 {
status = "okay";
};
ohci@e2100000 {
status = "okay";
};
apb {
gpio0: gpio@fc980000 {
status = "okay";
};
gpio1: gpio@a9000000 {
status = "okay";
};
i2c0: i2c@d0180000 {
status = "okay";
};
kbd@a0000000 {
linux,keymap = < 0x00010000
0x00020100
0x00030200
0x00040300
0x00050400
0x00060500
0x00070600
0x00080700
0x00090800
0x000a0001
0x000c0101
0x000d0201
0x000e0301
0x000f0401
0x00100501
0x00110601
0x00120701
0x00130801
0x00140002
0x00150102
0x00160202
0x00170302
0x00180402
0x00190502
0x001a0602
0x001b0702
0x001c0802
0x001d0003
0x001e0103
0x001f0203
0x00200303
0x00210403
0x00220503
0x00230603
0x00240703
0x00250803
0x00260004
0x00270104
0x00280204
0x00290304
0x002a0404
0x002b0504
0x002c0604
0x002d0704
0x002e0804
0x002f0005
0x00300105
0x00310205
0x00320305
0x00330405
0x00340505
0x00350605
0x00360705
0x00370805
0x00380006
0x00390106
0x003a0206
0x003b0306
0x003c0406
0x003d0506
0x003e0606
0x003f0706
0x00400806
0x00410007
0x00420107
0x00430207
0x00440307
0x00450407
0x00460507
0x00470607
0x00480707
0x00490807
0x004a0008
0x004b0108
0x004c0208
0x004d0308
0x004e0408
0x004f0508
0x00500608
0x00510708
0x00520808 >;
autorepeat;
st,mode = <0>;
status = "okay";
};
rtc@fc900000 {
status = "okay";
};
serial@d0000000 {
status = "okay";
};
wdt@fc880000 {
status = "okay";
};
};
};
};
/*
* DTS file for SPEAr300 SoC
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "spear3xx.dtsi"
/ {
ahb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x60000000 0x60000000 0x50000000
0xd0000000 0xd0000000 0x30000000>;
clcd@60000000 {
compatible = "arm,clcd-pl110", "arm,primecell";
reg = <0x60000000 0x1000>;
interrupts = <30>;
status = "disabled";
};
fsmc: flash@94000000 {
compatible = "st,spear600-fsmc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x94000000 0x1000 /* FSMC Register */
0x80000000 0x0010>; /* NAND Base */
reg-names = "fsmc_regs", "nand_data";
st,ale-off = <0x20000>;
st,cle-off = <0x10000>;
status = "disabled";
};
sdhci@70000000 {
compatible = "st,sdhci-spear";
reg = <0x70000000 0x100>;
interrupts = <1>;
status = "disabled";
};
apb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0xa0000000 0xa0000000 0x10000000
0xd0000000 0xd0000000 0x30000000>;
gpio1: gpio@a9000000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xa9000000 0x1000>;
status = "disabled";
};
kbd@a0000000 {
compatible = "st,spear300-kbd";
reg = <0xa0000000 0x1000>;
status = "disabled";
};
};
};
};
/*
* DTS file for SPEAr310 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "spear310.dtsi"
/ {
model = "ST SPEAr310 Evaluation Board";
compatible = "st,spear310-evb", "st,spear310";
#address-cells = <1>;
#size-cells = <1>;
memory {
reg = <0 0x40000000>;
};
ahb {
fsmc: flash@44000000 {
status = "okay";
};
gmac: eth@e0800000 {
status = "okay";
};
smi: flash@fc000000 {
status = "okay";
clock-rate=<50000000>;
flash@f8000000 {
label = "m25p64";
reg = <0xf8000000 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
st,smi-fast-mode;
};
};
spi0: spi@d0100000 {
status = "okay";
};
ehci@e1800000 {
status = "okay";
};
ohci@e1900000 {
status = "okay";
};
ohci@e2100000 {
status = "okay";
};
apb {
gpio0: gpio@fc980000 {
status = "okay";
};
i2c0: i2c@d0180000 {
status = "okay";
};
rtc@fc900000 {
status = "okay";
};
serial@d0000000 {
status = "okay";
};
serial@b2000000 {
status = "okay";
};
serial@b2080000 {
status = "okay";
};
serial@b2100000 {
status = "okay";
};
serial@b2180000 {
status = "okay";
};
serial@b2200000 {
status = "okay";
};
wdt@fc880000 {
status = "okay";
};
};
};
};
/*
* DTS file for SPEAr310 SoC
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "spear3xx.dtsi"
/ {
ahb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x40000000 0x40000000 0x10000000
0xb0000000 0xb0000000 0x10000000
0xd0000000 0xd0000000 0x30000000>;
fsmc: flash@44000000 {
compatible = "st,spear600-fsmc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x44000000 0x1000 /* FSMC Register */
0x40000000 0x0010>; /* NAND Base */
reg-names = "fsmc_regs", "nand_data";
st,ale-off = <0x10000>;
st,cle-off = <0x20000>;
status = "disabled";
};
apb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0xb0000000 0xb0000000 0x10000000
0xd0000000 0xd0000000 0x30000000>;
serial@b2000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb2000000 0x1000>;
status = "disabled";
};
serial@b2080000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb2080000 0x1000>;
status = "disabled";
};
serial@b2100000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb2100000 0x1000>;
status = "disabled";
};
serial@b2180000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb2180000 0x1000>;
status = "disabled";
};
serial@b2200000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb2200000 0x1000>;
status = "disabled";
};
};
};
};
/*
* DTS file for SPEAr320 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "spear320.dtsi"
/ {
model = "ST SPEAr300 Evaluation Board";
compatible = "st,spear300-evb", "st,spear300";
#address-cells = <1>;
#size-cells = <1>;
memory {
reg = <0 0x40000000>;
};
ahb {
clcd@90000000 {
status = "okay";
};
fsmc: flash@4c000000 {
status = "okay";
};
gmac: eth@e0800000 {
status = "okay";
};
sdhci@70000000 {
power-gpio = <&gpio0 2 1>;
power_always_enb;
status = "okay";
};
smi: flash@fc000000 {
status = "okay";
};
spi0: spi@d0100000 {
status = "okay";
};
spi1: spi@a5000000 {
status = "okay";
};
spi2: spi@a6000000 {
status = "okay";
};
ehci@e1800000 {
status = "okay";
};
ohci@e1900000 {
status = "okay";
};
ohci@e2100000 {
status = "okay";
};
apb {
gpio0: gpio@fc980000 {
status = "okay";
};
i2c0: i2c@d0180000 {
status = "okay";
};
i2c1: i2c@a7000000 {
status = "okay";
};
rtc@fc900000 {
status = "okay";
};
serial@d0000000 {
status = "okay";
};
serial@a3000000 {
status = "okay";
};
serial@a4000000 {
status = "okay";
};
wdt@fc880000 {
status = "okay";
};
};
};
};
/*
* DTS file for SPEAr320 SoC
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "spear3xx.dtsi"
/ {
ahb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x40000000 0x40000000 0x70000000
0xd0000000 0xd0000000 0x30000000>;
clcd@90000000 {
compatible = "arm,clcd-pl110", "arm,primecell";
reg = <0x90000000 0x1000>;
interrupts = <33>;
status = "disabled";
};
fsmc: flash@4c000000 {
compatible = "st,spear600-fsmc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x4c000000 0x1000 /* FSMC Register */
0x50000000 0x0010>; /* NAND Base */
reg-names = "fsmc_regs", "nand_data";
st,ale-off = <0x20000>;
st,cle-off = <0x10000>;
status = "disabled";
};
sdhci@70000000 {
compatible = "st,sdhci-spear";
reg = <0x70000000 0x100>;
interrupts = <29>;
status = "disabled";
};
spi1: spi@a5000000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xa5000000 0x1000>;
status = "disabled";
};
spi2: spi@a6000000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xa6000000 0x1000>;
status = "disabled";
};
apb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0xa0000000 0xa0000000 0x10000000
0xd0000000 0xd0000000 0x30000000>;
i2c1: i2c@a7000000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xa7000000 0x1000>;
status = "disabled";
};
serial@a3000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xa3000000 0x1000>;
status = "disabled";
};
serial@a4000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xa4000000 0x1000>;
status = "disabled";
};
};
};
};
/*
* DTS file for all SPEAr3xx SoCs
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
interrupt-parent = <&vic>;
cpus {
cpu@0 {
compatible = "arm,arm926ejs";
};
};
memory {
device_type = "memory";
reg = <0 0x40000000>;
};
ahb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0xd0000000 0xd0000000 0x30000000>;
vic: interrupt-controller@f1100000 {
compatible = "arm,pl190-vic";
interrupt-controller;
reg = <0xf1100000 0x1000>;
#interrupt-cells = <1>;
};
gmac: eth@e0800000 {
compatible = "st,spear600-gmac";
reg = <0xe0800000 0x8000>;
interrupts = <23 22>;
interrupt-names = "macirq", "eth_wake_irq";
status = "disabled";
};
smi: flash@fc000000 {
compatible = "st,spear600-smi";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xfc000000 0x1000>;
interrupts = <9>;
status = "disabled";
};
spi0: spi@d0100000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xd0100000 0x1000>;
interrupts = <20>;
status = "disabled";
};
ehci@e1800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe1800000 0x1000>;
interrupts = <26>;
status = "disabled";
};
ohci@e1900000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe1900000 0x1000>;
interrupts = <25>;
status = "disabled";
};
ohci@e2100000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe2100000 0x1000>;
interrupts = <27>;
status = "disabled";
};
apb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0xd0000000 0xd0000000 0x30000000>;
gpio0: gpio@fc980000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xfc980000 0x1000>;
interrupts = <11>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
i2c0: i2c@d0180000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xd0180000 0x1000>;
interrupts = <21>;
status = "disabled";
};
rtc@fc900000 {
compatible = "st,spear-rtc";
reg = <0xfc900000 0x1000>;
interrupts = <10>;
status = "disabled";
};
serial@d0000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xd0000000 0x1000>;
interrupts = <19>;
status = "disabled";
};
wdt@fc880000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0xfc880000 0x1000>;
interrupts = <12>;
status = "disabled";
};
};
};
};
......@@ -5,39 +5,19 @@
if ARCH_SPEAR3XX
menu "SPEAr3xx Implementations"
config BOARD_SPEAR300_EVB
bool "SPEAr300 Evaluation Board"
select MACH_SPEAR300
help
Supports ST SPEAr300 Evaluation Board
config BOARD_SPEAR310_EVB
bool "SPEAr310 Evaluation Board"
select MACH_SPEAR310
help
Supports ST SPEAr310 Evaluation Board
config BOARD_SPEAR320_EVB
bool "SPEAr320 Evaluation Board"
select MACH_SPEAR320
help
Supports ST SPEAr320 Evaluation Board
endmenu
config MACH_SPEAR300
bool "SPEAr300"
bool "SPEAr300 Machine support with Device Tree"
help
Supports ST SPEAr300 Machine
Supports ST SPEAr300 machine configured via the device-tree
config MACH_SPEAR310
bool "SPEAr310"
bool "SPEAr310 Machine support with Device Tree"
help
Supports ST SPEAr310 Machine
Supports ST SPEAr310 machine configured via the device-tree
config MACH_SPEAR320
bool "SPEAr320"
bool "SPEAr320 Machine support with Device Tree"
help
Supports ST SPEAr320 Machine
Supports ST SPEAr320 machine configured via the device-tree
endmenu
endif #ARCH_SPEAR3XX
......@@ -3,24 +3,13 @@
#
# common files
obj-y += spear3xx.o clock.o
obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o clock.o
# spear300 specific files
obj-$(CONFIG_MACH_SPEAR300) += spear300.o
# spear300 boards files
obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o
# spear310 specific files
obj-$(CONFIG_MACH_SPEAR310) += spear310.o
# spear310 boards files
obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o
# spear320 specific files
obj-$(CONFIG_MACH_SPEAR320) += spear320.o
# spear320 boards files
obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb
dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb
dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb
......@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <asm/mach-types.h>
#include <plat/clock.h>
#include <mach/misc_regs.h>
......@@ -673,11 +674,11 @@ static struct clk_lookup spear_clk_lookups[] = {
CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk),
CLKDEV_INIT(NULL, "osc_24m_clk", &osc_24m_clk),
/* clock derived from 32 KHz osc clk */
CLKDEV_INIT("rtc-spear", NULL, &rtc_clk),
CLKDEV_INIT("fc900000.rtc", NULL, &rtc_clk),
/* clock derived from 24 MHz osc clk */
CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk),
CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk),
CLKDEV_INIT("wdt", NULL, &wdt_clk),
CLKDEV_INIT("fc880000.wdt", NULL, &wdt_clk),
/* clock derived from pll1 clk */
CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk),
CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk),
......@@ -686,7 +687,7 @@ static struct clk_lookup spear_clk_lookups[] = {
CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk),
CLKDEV_INIT(NULL, "gpt1_synth_clk", &gpt1_synth_clk),
CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk),
CLKDEV_INIT("uart", NULL, &uart_clk),
CLKDEV_INIT("d0000000.serial", NULL, &uart_clk),
CLKDEV_INIT("firda", NULL, &firda_clk),
CLKDEV_INIT("gpt0", NULL, &gpt0_clk),
CLKDEV_INIT("gpt1", NULL, &gpt1_clk),
......@@ -699,81 +700,95 @@ static struct clk_lookup spear_clk_lookups[] = {
CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk),
/* clock derived from ahb clk */
CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
CLKDEV_INIT("i2c_designware.0", NULL, &i2c_clk),
CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk),
CLKDEV_INIT("dma", NULL, &dma_clk),
CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
CLKDEV_INIT("gmac", NULL, &gmac_clk),
CLKDEV_INIT("smi", NULL, &smi_clk),
CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk),
CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
CLKDEV_INIT("c3", NULL, &c3_clk),
/* clock derived from apb clk */
CLKDEV_INIT("adc", NULL, &adc_clk),
CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk),
CLKDEV_INIT("gpio", NULL, &gpio_clk),
CLKDEV_INIT("d0100000.spi", NULL, &ssp0_clk),
CLKDEV_INIT("fc980000.gpio", NULL, &gpio_clk),
};
/* array of all spear 300 clock lookups */
#ifdef CONFIG_MACH_SPEAR300
static struct clk_lookup spear300_clk_lookups[] = {
CLKDEV_INIT("clcd", NULL, &clcd_clk),
CLKDEV_INIT("fsmc", NULL, &fsmc_clk),
CLKDEV_INIT("gpio1", NULL, &gpio1_clk),
CLKDEV_INIT("keyboard", NULL, &kbd_clk),
CLKDEV_INIT("sdhci", NULL, &sdhci_clk),
CLKDEV_INIT("60000000.clcd", NULL, &clcd_clk),
CLKDEV_INIT("94000000.flash", NULL, &fsmc_clk),
CLKDEV_INIT("a9000000.gpio", NULL, &gpio1_clk),
CLKDEV_INIT("a0000000.kbd", NULL, &kbd_clk),
CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
};
void __init spear300_clk_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
clk_register(&spear_clk_lookups[i]);
for (i = 0; i < ARRAY_SIZE(spear300_clk_lookups); i++)
clk_register(&spear300_clk_lookups[i]);
clk_init();
}
#endif
/* array of all spear 310 clock lookups */
#ifdef CONFIG_MACH_SPEAR310
static struct clk_lookup spear310_clk_lookups[] = {
CLKDEV_INIT("fsmc", NULL, &fsmc_clk),
CLKDEV_INIT("44000000.flash", NULL, &fsmc_clk),
CLKDEV_INIT(NULL, "emi", &emi_clk),
CLKDEV_INIT("uart1", NULL, &uart1_clk),
CLKDEV_INIT("uart2", NULL, &uart2_clk),
CLKDEV_INIT("uart3", NULL, &uart3_clk),
CLKDEV_INIT("uart4", NULL, &uart4_clk),
CLKDEV_INIT("uart5", NULL, &uart5_clk),
CLKDEV_INIT("b2000000.serial", NULL, &uart1_clk),
CLKDEV_INIT("b2080000.serial", NULL, &uart2_clk),
CLKDEV_INIT("b2100000.serial", NULL, &uart3_clk),
CLKDEV_INIT("b2180000.serial", NULL, &uart4_clk),
CLKDEV_INIT("b2200000.serial", NULL, &uart5_clk),
};
void __init spear310_clk_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
clk_register(&spear_clk_lookups[i]);
for (i = 0; i < ARRAY_SIZE(spear310_clk_lookups); i++)
clk_register(&spear310_clk_lookups[i]);
clk_init();
}
#endif
/* array of all spear 320 clock lookups */
#ifdef CONFIG_MACH_SPEAR320
static struct clk_lookup spear320_clk_lookups[] = {
CLKDEV_INIT("clcd", NULL, &clcd_clk),
CLKDEV_INIT("fsmc", NULL, &fsmc_clk),
CLKDEV_INIT("i2c_designware.1", NULL, &i2c1_clk),
CLKDEV_INIT("90000000.clcd", NULL, &clcd_clk),
CLKDEV_INIT("4c000000.flash", NULL, &fsmc_clk),
CLKDEV_INIT("a7000000.i2c", NULL, &i2c1_clk),
CLKDEV_INIT(NULL, "emi", &emi_clk),
CLKDEV_INIT("pwm", NULL, &pwm_clk),
CLKDEV_INIT("sdhci", NULL, &sdhci_clk),
CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
CLKDEV_INIT("c_can_platform.0", NULL, &can0_clk),
CLKDEV_INIT("c_can_platform.1", NULL, &can1_clk),
CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk),
CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk),
CLKDEV_INIT("uart1", NULL, &uart1_clk),
CLKDEV_INIT("uart2", NULL, &uart2_clk),
CLKDEV_INIT("a5000000.spi", NULL, &ssp1_clk),
CLKDEV_INIT("a6000000.spi", NULL, &ssp2_clk),
CLKDEV_INIT("a3000000.serial", NULL, &uart1_clk),
CLKDEV_INIT("a4000000.serial", NULL, &uart2_clk),
};
#endif
void __init spear3xx_clk_init(void)
void __init spear320_clk_init(void)
{
int i, cnt;
struct clk_lookup *lookups;
if (machine_is_spear300()) {
cnt = ARRAY_SIZE(spear300_clk_lookups);
lookups = spear300_clk_lookups;
} else if (machine_is_spear310()) {
cnt = ARRAY_SIZE(spear310_clk_lookups);
lookups = spear310_clk_lookups;
} else {
cnt = ARRAY_SIZE(spear320_clk_lookups);
lookups = spear320_clk_lookups;
}
int i;
for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
clk_register(&spear_clk_lookups[i]);
for (i = 0; i < cnt; i++)
clk_register(&lookups[i]);
for (i = 0; i < ARRAY_SIZE(spear320_clk_lookups); i++)
clk_register(&spear320_clk_lookups[i]);
clk_init();
}
#endif
......@@ -31,16 +31,13 @@
#define SPEAR_GPT0_CHAN1_IRQ SPEAR3XX_IRQ_CPU_GPT1_2
/* Add spear3xx family device structure declarations here */
extern struct amba_device spear3xx_gpio_device;
extern struct amba_device spear3xx_uart_device;
extern struct sys_timer spear3xx_timer;
extern struct pl022_ssp_controller pl022_plat_data;
/* Add spear3xx family function declarations here */
void __init spear3xx_clk_init(void);
void __init spear_setup_timer(void);
void __init spear3xx_map_io(void);
void __init spear3xx_init_irq(void);
void __init spear3xx_init(void);
void __init spear3xx_dt_init_irq(void);
void spear_restart(char, const char *);
......@@ -99,9 +96,6 @@ extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50;
/* spear300 declarations */
#ifdef CONFIG_MACH_SPEAR300
/* Add spear300 machine device structure declarations here */
extern struct amba_device spear300_gpio1_device;
/* pad mux modes */
extern struct pmx_mode spear300_nand_mode;
extern struct pmx_mode spear300_nor_mode;
......@@ -133,16 +127,13 @@ extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit;
extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit;
extern struct pmx_dev spear300_pmx_gpio1;
/* Add spear300 machine function declarations here */
void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
u8 pmx_dev_count);
/* Add spear300 machine declarations here */
void __init spear300_clk_init(void);
#endif /* CONFIG_MACH_SPEAR300 */
/* spear310 declarations */
#ifdef CONFIG_MACH_SPEAR310
/* Add spear310 machine device structure declarations here */
/* pad mux devices */
extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5;
extern struct pmx_dev spear310_pmx_emi_cs_2_3;
......@@ -153,16 +144,13 @@ extern struct pmx_dev spear310_pmx_fsmc;
extern struct pmx_dev spear310_pmx_rs485_0_1;
extern struct pmx_dev spear310_pmx_tdm0;
/* Add spear310 machine function declarations here */
void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
u8 pmx_dev_count);
/* Add spear310 machine declarations here */
void __init spear310_clk_init(void);
#endif /* CONFIG_MACH_SPEAR310 */
/* spear320 declarations */
#ifdef CONFIG_MACH_SPEAR320
/* Add spear320 machine device structure declarations here */
/* pad mux modes */
extern struct pmx_mode spear320_auto_net_smii_mode;
extern struct pmx_mode spear320_auto_net_mii_mode;
......@@ -193,9 +181,8 @@ extern struct pmx_dev spear320_pmx_smii0;
extern struct pmx_dev spear320_pmx_smii1;
extern struct pmx_dev spear320_pmx_i2c1;
/* Add spear320 machine function declarations here */
void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
u8 pmx_dev_count);
/* Add spear320 machine declarations here */
void __init spear320_clk_init(void);
#endif /* CONFIG_MACH_SPEAR320 */
......
......@@ -17,7 +17,4 @@
#include <plat/hardware.h>
#include <mach/spear.h>
/* Vitual to physical translation of statically mapped space */
#define IO_ADDRESS(x) (x | 0xF0000000)
#endif /* __MACH_HARDWARE_H */
......@@ -25,8 +25,9 @@
/* ICM1 - Low speed connection */
#define SPEAR3XX_ICM1_2_BASE UL(0xD0000000)
#define VA_SPEAR3XX_ICM1_2_BASE UL(0xFD000000)
#define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000)
#define VA_SPEAR3XX_ICM1_UART_BASE IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
#define VA_SPEAR3XX_ICM1_UART_BASE (VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE)
#define SPEAR3XX_ICM1_ADC_BASE UL(0xD0080000)
#define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000)
#define SPEAR3XX_ICM1_I2C_BASE UL(0xD0180000)
......@@ -53,11 +54,11 @@
#define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000)
#define SPEAR3XX_ML1_TMR_BASE UL(0xF0000000)
#define SPEAR3XX_ML1_VIC_BASE UL(0xF1100000)
#define VA_SPEAR3XX_ML1_VIC_BASE IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
/* ICM3 - Basic Subsystem */
#define SPEAR3XX_ICM3_SMEM_BASE UL(0xF8000000)
#define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
#define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000)
#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000)
#define SPEAR3XX_ICM3_TMR0_BASE UL(0xFC800000)
......@@ -65,9 +66,9 @@
#define SPEAR3XX_ICM3_RTC_BASE UL(0xFC900000)
#define SPEAR3XX_ICM3_GPIO_BASE UL(0xFC980000)
#define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE)
#define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
#define VA_SPEAR3XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
#define VA_SPEAR3XX_ICM3_MISC_REG_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE)
#define SPEAR3XX_ICM3_TMR1_BASE UL(0xFCB00000)
/* Debug uart for linux, will be used for debug and uncompress messages */
......
......@@ -3,8 +3,8 @@
*
* SPEAr300 machine source file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
* Copyright (C) 2009-2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
......@@ -13,10 +13,9 @@
#define pr_fmt(fmt) "SPEAr300: " fmt
#include <linux/types.h>
#include <linux/amba/pl061.h>
#include <linux/ptrace.h>
#include <asm/irq.h>
#include <linux/of_platform.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
#include <mach/hardware.h>
......@@ -425,24 +424,35 @@ static struct spear_shirq shirq_ras1 = {
},
};
/* Add spear300 specific devices here */
/* arm gpio1 device registration */
static struct pl061_platform_data gpio1_plat_data = {
.gpio_base = 8,
.irq_base = SPEAR300_GPIO1_INT_BASE,
/* padmux devices to enable */
static struct pmx_dev *spear300_evb_pmx_devs[] = {
/* spear3xx specific devices */
&spear3xx_pmx_i2c,
&spear3xx_pmx_ssp_cs,
&spear3xx_pmx_ssp,
&spear3xx_pmx_mii,
&spear3xx_pmx_uart0,
/* spear300 specific devices */
&spear300_pmx_fsmc_2_chips,
&spear300_pmx_clcd,
&spear300_pmx_telecom_sdhci_4bit,
&spear300_pmx_gpio1,
};
AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
{SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
/* Add SPEAr300 auxdata to pass platform data */
static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
&pl022_plat_data),
{}
};
/* spear300 routines */
void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
u8 pmx_dev_count)
static void __init spear300_dt_init(void)
{
int ret = 0;
int ret = -EINVAL;
/* call spear3xx family common init function */
spear3xx_init();
of_platform_populate(NULL, of_default_bus_match_table,
spear300_auxdata_lookup, NULL);
/* shared irq registration */
shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
......@@ -452,18 +462,45 @@ void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
pr_err("Error registering Shared IRQ\n");
}
/* pmx initialization */
pmx_driver.mode = pmx_mode;
pmx_driver.devs = pmx_devs;
pmx_driver.devs_count = pmx_dev_count;
if (of_machine_is_compatible("st,spear300-evb")) {
/* pmx initialization */
pmx_driver.mode = &spear300_photo_frame_mode;
pmx_driver.devs = spear300_evb_pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(spear300_evb_pmx_devs);
pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
if (pmx_driver.base) {
ret = pmx_register(&pmx_driver);
if (ret)
pr_err("padmux: registration failed. err no: %d\n",
ret);
/* Free Mapping, device selection already done */
iounmap(pmx_driver.base);
}
pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
if (pmx_driver.base) {
ret = pmx_register(&pmx_driver);
if (ret)
pr_err("padmux: registration failed. err no: %d\n",
ret);
/* Free Mapping, device selection already done */
iounmap(pmx_driver.base);
pr_err("Initialization Failed");
}
}
static const char * const spear300_dt_board_compat[] = {
"st,spear300",
"st,spear300-evb",
NULL,
};
static void __init spear300_map_io(void)
{
spear3xx_map_io();
spear300_clk_init();
}
DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree")
.map_io = spear300_map_io,
.init_irq = spear3xx_dt_init_irq,
.handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear300_dt_init,
.restart = spear_restart,
.dt_compat = spear300_dt_board_compat,
MACHINE_END
/*
* arch/arm/mach-spear3xx/spear300_evb.c
*
* SPEAr300 evaluation board source file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
#include <mach/hardware.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
/* spear3xx specific devices */
&spear3xx_pmx_i2c,
&spear3xx_pmx_ssp_cs,
&spear3xx_pmx_ssp,
&spear3xx_pmx_mii,
&spear3xx_pmx_uart0,
/* spear300 specific devices */
&spear300_pmx_fsmc_2_chips,
&spear300_pmx_clcd,
&spear300_pmx_telecom_sdhci_4bit,
&spear300_pmx_gpio1,
};
static struct amba_device *amba_devs[] __initdata = {
/* spear3xx specific devices */
&spear3xx_gpio_device,
&spear3xx_uart_device,
/* spear300 specific devices */
&spear300_gpio1_device,
};
static struct platform_device *plat_devs[] __initdata = {
/* spear3xx specific devices */
/* spear300 specific devices */
};
static void __init spear300_evb_init(void)
{
unsigned int i;
/* call spear300 machine init function */
spear300_init(&spear300_photo_frame_mode, pmx_devs,
ARRAY_SIZE(pmx_devs));
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
/* Add Amba Devices */
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
amba_device_register(amba_devs[i], &iomem_resource);
}
MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
.atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
.handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear300_evb_init,
.restart = spear_restart,
MACHINE_END
......@@ -3,8 +3,8 @@
*
* SPEAr310 machine source file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
* Copyright (C) 2009-2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
......@@ -13,8 +13,11 @@
#define pr_fmt(fmt) "SPEAr310: " fmt
#include <linux/ptrace.h>
#include <asm/irq.h>
#include <linux/amba/pl08x.h>
#include <linux/amba/serial.h>
#include <linux/of_platform.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
#include <mach/hardware.h>
......@@ -257,17 +260,79 @@ static struct spear_shirq shirq_intrcomm_ras = {
},
};
/* Add spear310 specific devices here */
/* padmux devices to enable */
static struct pmx_dev *spear310_evb_pmx_devs[] = {
/* spear3xx specific devices */
&spear3xx_pmx_i2c,
&spear3xx_pmx_ssp,
&spear3xx_pmx_gpio_pin0,
&spear3xx_pmx_gpio_pin1,
&spear3xx_pmx_gpio_pin2,
&spear3xx_pmx_gpio_pin3,
&spear3xx_pmx_gpio_pin4,
&spear3xx_pmx_gpio_pin5,
&spear3xx_pmx_uart0,
/* spear310 specific devices */
&spear310_pmx_emi_cs_0_1_4_5,
&spear310_pmx_emi_cs_2_3,
&spear310_pmx_uart1,
&spear310_pmx_uart2,
&spear310_pmx_uart3_4_5,
&spear310_pmx_fsmc,
&spear310_pmx_rs485_0_1,
&spear310_pmx_tdm0,
};
/* uart devices plat data */
static struct amba_pl011_data spear310_uart_data[] = {
{
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart1_tx",
.dma_rx_param = "uart1_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart2_tx",
.dma_rx_param = "uart2_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart3_tx",
.dma_rx_param = "uart3_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart4_tx",
.dma_rx_param = "uart4_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart5_tx",
.dma_rx_param = "uart5_rx",
},
};
/* spear310 routines */
void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
u8 pmx_dev_count)
/* Add SPEAr310 auxdata to pass platform data */
static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
&pl022_plat_data),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL,
&spear310_uart_data[0]),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL,
&spear310_uart_data[1]),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART3_BASE, NULL,
&spear310_uart_data[2]),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART4_BASE, NULL,
&spear310_uart_data[3]),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART5_BASE, NULL,
&spear310_uart_data[4]),
{}
};
static void __init spear310_dt_init(void)
{
void __iomem *base;
int ret = 0;
/* call spear3xx family common init function */
spear3xx_init();
of_platform_populate(NULL, of_default_bus_match_table,
spear310_auxdata_lookup, NULL);
/* shared irq registration */
base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
......@@ -297,13 +362,38 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
pr_err("Error registering Shared IRQ 4\n");
}
/* pmx initialization */
pmx_driver.base = base;
pmx_driver.mode = pmx_mode;
pmx_driver.devs = pmx_devs;
pmx_driver.devs_count = pmx_dev_count;
if (of_machine_is_compatible("st,spear310-evb")) {
/* pmx initialization */
pmx_driver.base = base;
pmx_driver.mode = NULL;
pmx_driver.devs = spear310_evb_pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs);
ret = pmx_register(&pmx_driver);
if (ret)
pr_err("padmux: registration failed. err no: %d\n", ret);
ret = pmx_register(&pmx_driver);
if (ret)
pr_err("padmux: registration failed. err no: %d\n",
ret);
}
}
static const char * const spear310_dt_board_compat[] = {
"st,spear310",
"st,spear310-evb",
NULL,
};
static void __init spear310_map_io(void)
{
spear3xx_map_io();
spear310_clk_init();
}
DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
.map_io = spear310_map_io,
.init_irq = spear3xx_dt_init_irq,
.handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear310_dt_init,
.restart = spear_restart,
.dt_compat = spear310_dt_board_compat,
MACHINE_END
/*
* arch/arm/mach-spear3xx/spear310_evb.c
*
* SPEAr310 evaluation board source file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
#include <mach/hardware.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
/* spear3xx specific devices */
&spear3xx_pmx_i2c,
&spear3xx_pmx_ssp,
&spear3xx_pmx_gpio_pin0,
&spear3xx_pmx_gpio_pin1,
&spear3xx_pmx_gpio_pin2,
&spear3xx_pmx_gpio_pin3,
&spear3xx_pmx_gpio_pin4,
&spear3xx_pmx_gpio_pin5,
&spear3xx_pmx_uart0,
/* spear310 specific devices */
&spear310_pmx_emi_cs_0_1_4_5,
&spear310_pmx_emi_cs_2_3,
&spear310_pmx_uart1,
&spear310_pmx_uart2,
&spear310_pmx_uart3_4_5,
&spear310_pmx_fsmc,
&spear310_pmx_rs485_0_1,
&spear310_pmx_tdm0,
};
static struct amba_device *amba_devs[] __initdata = {
/* spear3xx specific devices */
&spear3xx_gpio_device,
&spear3xx_uart_device,
/* spear310 specific devices */
};
static struct platform_device *plat_devs[] __initdata = {
/* spear3xx specific devices */
/* spear310 specific devices */
};
static void __init spear310_evb_init(void)
{
unsigned int i;
/* call spear310 machine init function */
spear310_init(NULL, pmx_devs, ARRAY_SIZE(pmx_devs));
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
/* Add Amba Devices */
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
amba_device_register(amba_devs[i], &iomem_resource);
}
MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
.atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
.handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear310_evb_init,
.restart = spear_restart,
MACHINE_END
......@@ -3,8 +3,8 @@
*
* SPEAr320 machine source file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
* Copyright (C) 2009-2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
......@@ -13,8 +13,12 @@
#define pr_fmt(fmt) "SPEAr320: " fmt
#include <linux/ptrace.h>
#include <asm/irq.h>
#include <linux/amba/pl022.h>
#include <linux/amba/pl08x.h>
#include <linux/amba/serial.h>
#include <linux/of_platform.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
#include <mach/hardware.h>
......@@ -510,17 +514,79 @@ static struct spear_shirq shirq_intrcomm_ras = {
},
};
/* Add spear320 specific devices here */
/* padmux devices to enable */
static struct pmx_dev *spear320_evb_pmx_devs[] = {
/* spear3xx specific devices */
&spear3xx_pmx_i2c,
&spear3xx_pmx_ssp,
&spear3xx_pmx_mii,
&spear3xx_pmx_uart0,
/* spear320 specific devices */
&spear320_pmx_fsmc,
&spear320_pmx_sdhci,
&spear320_pmx_i2s,
&spear320_pmx_uart1,
&spear320_pmx_uart2,
&spear320_pmx_can,
&spear320_pmx_pwm0,
&spear320_pmx_pwm1,
&spear320_pmx_pwm2,
&spear320_pmx_mii1,
};
static struct pl022_ssp_controller spear320_ssp_data[] = {
{
.bus_id = 1,
.enable_dma = 1,
.dma_filter = pl08x_filter_id,
.dma_tx_param = "ssp1_tx",
.dma_rx_param = "ssp1_rx",
.num_chipselect = 2,
}, {
.bus_id = 2,
.enable_dma = 1,
.dma_filter = pl08x_filter_id,
.dma_tx_param = "ssp2_tx",
.dma_rx_param = "ssp2_rx",
.num_chipselect = 2,
}
};
static struct amba_pl011_data spear320_uart_data[] = {
{
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart1_tx",
.dma_rx_param = "uart1_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart2_tx",
.dma_rx_param = "uart2_rx",
},
};
/* spear320 routines */
void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
u8 pmx_dev_count)
/* Add SPEAr310 auxdata to pass platform data */
static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
&pl022_plat_data),
OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL,
&spear320_ssp_data[0]),
OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL,
&spear320_ssp_data[1]),
OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL,
&spear320_uart_data[0]),
OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL,
&spear320_uart_data[1]),
{}
};
static void __init spear320_dt_init(void)
{
void __iomem *base;
int ret = 0;
/* call spear3xx family common init function */
spear3xx_init();
of_platform_populate(NULL, of_default_bus_match_table,
spear320_auxdata_lookup, NULL);
/* shared irq registration */
base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
......@@ -544,13 +610,38 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
pr_err("Error registering Shared IRQ 4\n");
}
/* pmx initialization */
pmx_driver.base = base;
pmx_driver.mode = pmx_mode;
pmx_driver.devs = pmx_devs;
pmx_driver.devs_count = pmx_dev_count;
if (of_machine_is_compatible("st,spear320-evb")) {
/* pmx initialization */
pmx_driver.base = base;
pmx_driver.mode = &spear320_auto_net_mii_mode;
pmx_driver.devs = spear320_evb_pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(spear320_evb_pmx_devs);
ret = pmx_register(&pmx_driver);
if (ret)
pr_err("padmux: registration failed. err no: %d\n", ret);
ret = pmx_register(&pmx_driver);
if (ret)
pr_err("padmux: registration failed. err no: %d\n",
ret);
}
}
static const char * const spear320_dt_board_compat[] = {
"st,spear320",
"st,spear320-evb",
NULL,
};
static void __init spear320_map_io(void)
{
spear3xx_map_io();
spear320_clk_init();
}
DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
.map_io = spear320_map_io,
.init_irq = spear3xx_dt_init_irq,
.handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear320_dt_init,
.restart = spear_restart,
.dt_compat = spear320_dt_board_compat,
MACHINE_END
/*
* arch/arm/mach-spear3xx/spear320_evb.c
*
* SPEAr320 evaluation board source file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
#include <mach/hardware.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
/* spear3xx specific devices */
&spear3xx_pmx_i2c,
&spear3xx_pmx_ssp,
&spear3xx_pmx_mii,
&spear3xx_pmx_uart0,
/* spear320 specific devices */
&spear320_pmx_fsmc,
&spear320_pmx_sdhci,
&spear320_pmx_i2s,
&spear320_pmx_uart1,
&spear320_pmx_uart2,
&spear320_pmx_can,
&spear320_pmx_pwm0,
&spear320_pmx_pwm1,
&spear320_pmx_pwm2,
&spear320_pmx_mii1,
};
static struct amba_device *amba_devs[] __initdata = {
/* spear3xx specific devices */
&spear3xx_gpio_device,
&spear3xx_uart_device,
/* spear320 specific devices */
};
static struct platform_device *plat_devs[] __initdata = {
/* spear3xx specific devices */
/* spear320 specific devices */
};
static void __init spear320_evb_init(void)
{
unsigned int i;
/* call spear320 machine init function */
spear320_init(&spear320_auto_net_mii_mode, pmx_devs,
ARRAY_SIZE(pmx_devs));
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
/* Add Amba Devices */
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
amba_device_register(amba_devs[i], &iomem_resource);
}
MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
.atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
.handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear320_evb_init,
.restart = spear_restart,
MACHINE_END
......@@ -3,8 +3,8 @@
*
* SPEAr3XX machines common source file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
* Copyright (C) 2009-2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
......@@ -13,76 +13,14 @@
#define pr_fmt(fmt) "SPEAr3xx: " fmt
#include <linux/types.h>
#include <linux/amba/pl061.h>
#include <linux/ptrace.h>
#include <linux/amba/pl022.h>
#include <linux/amba/pl08x.h>
#include <linux/of_irq.h>
#include <linux/io.h>
#include <asm/hardware/vic.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <mach/generic.h>
#include <mach/hardware.h>
/* Add spear3xx machines common devices here */
/* gpio device registration */
static struct pl061_platform_data gpio_plat_data = {
.gpio_base = 0,
.irq_base = SPEAR3XX_GPIO_INT_BASE,
};
AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
{SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
/* uart device registration */
AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
{SPEAR3XX_IRQ_UART}, NULL);
/* Do spear3xx familiy common initialization part here */
void __init spear3xx_init(void)
{
/* nothing to do for now */
}
/* This will initialize vic */
void __init spear3xx_init_irq(void)
{
vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0);
}
/* Following will create static virtual/physical mappings */
struct map_desc spear3xx_io_desc[] __initdata = {
{
.virtual = VA_SPEAR3XX_ICM1_UART_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ML1_VIC_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
.length = SZ_4K,
.type = MT_DEVICE
},
};
/* This will create static memory mapping for selected devices */
void __init spear3xx_map_io(void)
{
iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
/* This will initialize clock framework */
spear3xx_clk_init();
}
/* pad multiplexing support */
/* devices */
static struct pmx_dev_mode pmx_firda_modes[] = {
......@@ -508,6 +446,51 @@ struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = {
};
#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
/* ssp device registration */
struct pl022_ssp_controller pl022_plat_data = {
.bus_id = 0,
.enable_dma = 1,
.dma_filter = pl08x_filter_id,
.dma_tx_param = "ssp0_tx",
.dma_rx_param = "ssp0_rx",
/*
* This is number of spi devices that can be connected to spi. There are
* two type of chipselects on which slave devices can work. One is chip
* select provided by spi masters other is controlled through external
* gpio's. We can't use chipselect provided from spi master (because as
* soon as FIFO becomes empty, CS is disabled and transfer ends). So
* this number now depends on number of gpios available for spi. each
* slave on each master requires a separate gpio pin.
*/
.num_chipselect = 2,
};
/*
* Following will create 16MB static virtual/physical mappings
* PHYSICAL VIRTUAL
* 0xD0000000 0xFD000000
* 0xFC000000 0xFC000000
*/
struct map_desc spear3xx_io_desc[] __initdata = {
{
.virtual = VA_SPEAR3XX_ICM1_2_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM1_2_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ICM3_SMI_CTRL_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_SMI_CTRL_BASE),
.length = SZ_16M,
.type = MT_DEVICE
},
};
/* This will create static memory mapping for selected devices */
void __init spear3xx_map_io(void)
{
iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
}
static void __init spear3xx_timer_init(void)
{
char pclk_name[] = "pll3_48m_clk";
......@@ -538,3 +521,13 @@ static void __init spear3xx_timer_init(void)
struct sys_timer spear3xx_timer = {
.init = spear3xx_timer_init,
};
static const struct of_device_id vic_of_match[] __initconst = {
{ .compatible = "arm,pl190-vic", .data = vic_of_init, },
{ /* Sentinel */ }
};
void __init spear3xx_dt_init_irq(void)
{
of_irq_init(vic_of_match);
}
......@@ -9,9 +9,10 @@ choice
default ARCH_SPEAR3XX
config ARCH_SPEAR3XX
bool "SPEAr3XX"
bool "ST SPEAr3xx with Device Tree"
select ARM_VIC
select CPU_ARM926T
select USE_OF
help
Supports for ARM's SPEAR3XX family
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment