Commit c606b499 authored by David S. Miller's avatar David S. Miller

Revert "phy dp83867: Make rgmii parameters optional"

This reverts commit 81003bc9.

Developers have asked me to revert this for now.
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 27896c83
...@@ -65,7 +65,6 @@ struct dp83867_private { ...@@ -65,7 +65,6 @@ struct dp83867_private {
int rx_id_delay; int rx_id_delay;
int tx_id_delay; int tx_id_delay;
int fifo_depth; int fifo_depth;
int values_are_sane;
}; };
static int dp83867_ack_interrupt(struct phy_device *phydev) static int dp83867_ack_interrupt(struct phy_device *phydev)
...@@ -114,30 +113,15 @@ static int dp83867_of_init(struct phy_device *phydev) ...@@ -114,30 +113,15 @@ static int dp83867_of_init(struct phy_device *phydev)
ret = of_property_read_u32(of_node, "ti,rx-internal-delay", ret = of_property_read_u32(of_node, "ti,rx-internal-delay",
&dp83867->rx_id_delay); &dp83867->rx_id_delay);
if (ret) if (ret)
goto invalid_dt; return ret;
ret = of_property_read_u32(of_node, "ti,tx-internal-delay", ret = of_property_read_u32(of_node, "ti,tx-internal-delay",
&dp83867->tx_id_delay); &dp83867->tx_id_delay);
if (ret) if (ret)
goto invalid_dt; return ret;
ret = of_property_read_u32(of_node, "ti,fifo-depth", return of_property_read_u32(of_node, "ti,fifo-depth",
&dp83867->fifo_depth); &dp83867->fifo_depth);
if (ret)
goto invalid_dt;
dp83867->values_are_sane = 1;
return 0;
invalid_dt:
phydev_err(phydev, "missing properties in device tree");
/*
* We can still run with a broken dt by not using any of the optional
* parameters, so just don't set dp83867->values_are_sane.
*/
return 0;
} }
#else #else
static int dp83867_of_init(struct phy_device *phydev) static int dp83867_of_init(struct phy_device *phydev)
...@@ -166,15 +150,6 @@ static int dp83867_config_init(struct phy_device *phydev) ...@@ -166,15 +150,6 @@ static int dp83867_config_init(struct phy_device *phydev)
dp83867 = (struct dp83867_private *)phydev->priv; dp83867 = (struct dp83867_private *)phydev->priv;
} }
/*
* With no or broken device tree, we don't have the values that we would
* want to configure the phy with. In that case, cross our fingers and
* assume that firmware did everything correctly for us or that we don't
* need them.
*/
if (!dp83867->values_are_sane)
return 0;
if (phy_interface_is_rgmii(phydev)) { if (phy_interface_is_rgmii(phydev)) {
ret = phy_write(phydev, MII_DP83867_PHYCTRL, ret = phy_write(phydev, MII_DP83867_PHYCTRL,
(dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT)); (dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT));
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment