Merge tag 'at91-ab-4.10-dt1' of...

Merge tag 'at91-ab-4.10-dt1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

DT changes for 4.10:

 - Many additions for sama5d2
 - few non urgent fixes for sam9260ek, sama5d4 and sama5d2

* tag 'at91-ab-4.10-dt1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: replace gpio-key,wakeup with wakeup-source for sam9260ek
  ARM: dts: at91: sama5d2: Add securam node
  ARM: dts: at91: sama5d2: Add secumod node
  ARM: dts: at91: sama5d2: use correct sckc compatible
  ARM: dts: at91: sama5d4: use proper sckc compatible
  ARM: dts: at91: fixes dbgu pinctrl, set pullup on rx, clear pullup on tx
  dt-bindings: usb: atmel: fix a couple of copy-paste style typos
  ARM: dts: at91: sama5d2: enable FIFOs for high-speed i2c controllers
  ARM: dts: at91: sama5d4: Add new MA5D4EVK manufacturer compat
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/usb/atmel-usb.txt

@@ -6,9 +6,9 @@ Required properties:
  - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
    used in host mode.
  - reg: Address and length of the register set for the device
- - interrupts: Should contain ehci interrupt
+ - interrupts: Should contain ohci interrupt
  - clocks: Should reference the peripheral, host and system clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain three strings
 		"ohci_clk" for the peripheral clock
 		"hclk" for the host clock
 		"uhpck" for the system clock
@@ -35,7 +35,7 @@ Required properties:
  - reg: Address and length of the register set for the device
  - interrupts: Should contain ehci interrupt
  - clocks: Should reference the peripheral and the UTMI clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain two strings
 		"ehci_clk" for the peripheral clock
 		"usb_clk" for the UTMI clock
 
@@ -58,7 +58,7 @@ Required properties:
  - reg: Address and length of the register set for the device
  - interrupts: Should contain macb interrupt
  - clocks: Should reference the peripheral and the AHB clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain two strings
 		"pclk" for the peripheral clock
 		"hclk" for the AHB clock
 
@@ -85,7 +85,7 @@ Required properties:
  - reg: Address and length of the register set for the device
  - interrupts: Should contain usba interrupt
  - clocks: Should reference the peripheral and host clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain two strings
 		"pclk" for the peripheral clock
 		"hclk" for the host clock
  - ep childnode: To specify the number of endpoints and their properties.

arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi

@@ -12,8 +12,8 @@
 #include "sama5d4.dtsi"
 
 / {
-	model = "DENX MA5D4";
-	compatible = "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
+	model = "Aries/DENX MA5D4";
+	compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
 
 	memory {
 		reg = <0x20000000 0x10000000>;

arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts

@@ -13,8 +13,8 @@
 #include "at91-sama5d4_ma5d4.dtsi"
 
 / {
-	model = "DENX MA5D4EVK";
-	compatible = "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
+	model = "Aries/DENX MA5D4EVK";
+	compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
 
 	chosen {
 		stdout-path = "serial3:115200n8";

arch/arm/boot/dts/at91rm9200.dtsi

@@ -481,8 +481,8 @@ pinctrl@fffff400 {
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A */
-							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA31 periph with pullup */
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 

arch/arm/boot/dts/at91sam9260.dtsi

@@ -412,8 +412,8 @@ pinctrl@fffff400 {
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
-							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB15 periph with pullup */
+							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 

arch/arm/boot/dts/at91sam9260ek.dts

@@ -174,14 +174,14 @@ btn3 {
 			label = "Button 3";
 			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 

arch/arm/boot/dts/at91sam9261.dtsi

@@ -302,8 +302,8 @@ pinctrl@fffff400 {
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 

arch/arm/boot/dts/at91sam9263.dtsi

@@ -412,8 +412,8 @@ pinctrl@fffff200 {
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC30 periph A */
-							 AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC31 periph with pullup */
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -478,8 +478,8 @@ pinctrl_adc0_ad7: adc0_ad7 {
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB13 periph A */
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -500,8 +500,8 @@ pinctrl@fffff400 {
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA10 periph with pullup */
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 

arch/arm/boot/dts/at91sam9rl.dtsi

@@ -438,8 +438,8 @@ pinctrl_adc0_adtrg: adc0_adtrg-0 {
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -460,8 +460,8 @@ pinctrl@fffff400 {
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA10 periph A with pullup */
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 

arch/arm/boot/dts/sama5d2.dtsi

@@ -735,6 +735,11 @@ pdmic_clk: pdmic_clk {
 						atmel,clk-output-range = <0 83000000>;
 					};
 
+					securam_clk: securam_clk {
+						#clock-cells = <0>;
+						reg = <51>;
+					};
+
 					i2s0_clk: i2s0_clk {
 						#clock-cells = <0>;
 						reg = <54>;
@@ -1030,6 +1035,7 @@ AT91_XDMAC_DT_PERID(0))>,
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&twi0_clk>;
+				atmel,fifo-size = <16>;
 				status = "disabled";
 			};
 
@@ -1058,6 +1064,15 @@ flx1: flexcom@f8038000 {
 				status = "disabled";
 			};
 
+			securam: sram@f8044000 {
+				compatible = "atmel,sama5d2-securam", "mmio-sram";
+				reg = <0xf8044000 0x1420>;
+				clocks = <&securam_clk>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0xf8044000 0x1420>;
+			};
+
 			rstc@f8048000 {
 				compatible = "atmel,sama5d3-rstc";
 				reg = <0xf8048000 0x10>;
@@ -1088,30 +1103,12 @@ watchdog@f8048040 {
 				status = "disabled";
 			};
 
-			sckc@f8048050 {
-				compatible = "atmel,at91sam9x5-sckc";
+			clk32k: sckc@f8048050 {
+				compatible = "atmel,sama5d4-sckc";
 				reg = <0xf8048050 0x4>;
 
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <250000000>;
-					atmel,startup-time-usec = <75>;
-				};
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					clocks = <&slow_xtal>;
-					atmel,startup-time-usec = <1200000>;
-				};
-
-				clk32k: slowck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc &slow_osc>;
-				};
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
 			};
 
 			rtc@f80480b0 {
@@ -1231,6 +1228,7 @@ AT91_XDMAC_DT_PERID(2))>,
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&twi1_clk>;
+				atmel,fifo-size = <16>;
 				status = "disabled";
 			};
 
@@ -1260,6 +1258,11 @@ pioA: pinctrl@fc038000 {
 				clocks = <&pioA_clk>;
 			};
 
+			secumod@fc040000 {
+				compatible = "atmel,sama5d2-secumod", "syscon";
+				reg = <0xfc040000 0x100>;
+			};
+
 			tdes@fc044000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xfc044000 0x100>;

arch/arm/boot/dts/sama5d3.dtsi

@@ -549,8 +549,8 @@ pinctrl_adc0_ad11: adc0_ad11 {
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB30 periph A */
-							 AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB31 periph A with pullup */
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 

arch/arm/boot/dts/sama5d4.dtsi

@@ -1314,30 +1314,11 @@ watchdog@fc068640 {
 				status = "disabled";
 			};
 
-			sckc@fc068650 {
-				compatible = "atmel,at91sam9x5-sckc";
+			clk32k: sckc@fc068650 {
+				compatible = "atmel,sama5d4-sckc";
 				reg = <0xfc068650 0x4>;
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <250000000>;
-					atmel,startup-time-usec = <75>;
-				};
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					clocks = <&slow_xtal>;
-					atmel,startup-time-usec = <1200000>;
-				};
-
-				clk32k: slowck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc &slow_osc>;
-				};
+				#clock-cells = <0>;
+				clocks = <&slow_xtal>;
 			};
 
 			rtc@fc0686b0 {
@@ -1461,8 +1442,8 @@ pinctrl_adc0_ad4: adc0_ad4 {
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,     /* conflicts with D14 and TDI */
-							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;  /* conflicts with D15 and TDO */
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with D14 and TDI */
+							 AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;		/* conflicts with D15 and TDO */
 					};
 				};