staging: r8188eu: Correct missing or extra space in the statements

Properly spacing out code statements/instructions improves code
readability. Add missing or remove extra space as necessary according
to the Linux Kernel coding-style guidelines. Following errors reported
by checkpatch script for inconsistent code spacing:
	ERROR: space prohibited before that close parenthesis ')'
	ERROR: space prohibited before that ',' (ctx:WxW)
	CHECK: spaces preferred around that '&' (ctx:VxV)
Signed-off-by: Deepak R Varma <drv@mailo.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/4559d1a406b9f32379ec01cfadacea13a11803ac.1666299151.git.drv@mailo.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/r8188eu/include/rtl8188e_spec.h

@@ -900,12 +900,12 @@ Current IOREG MAP
 #define HQSEL_HIQ			BIT(5)
 
 /*  For normal driver, 0x10C */
-#define _TXDMA_HIQ_MAP(x)		(((x)&0x3) << 14)
-#define _TXDMA_MGQ_MAP(x)		(((x)&0x3) << 12)
-#define _TXDMA_BKQ_MAP(x)		(((x)&0x3) << 10)
-#define _TXDMA_BEQ_MAP(x)		(((x)&0x3) << 8 )
-#define _TXDMA_VIQ_MAP(x)		(((x)&0x3) << 6 )
-#define _TXDMA_VOQ_MAP(x)		(((x)&0x3) << 4 )
+#define _TXDMA_HIQ_MAP(x)		(((x) & 0x3) << 14)
+#define _TXDMA_MGQ_MAP(x)		(((x) & 0x3) << 12)
+#define _TXDMA_BKQ_MAP(x)		(((x) & 0x3) << 10)
+#define _TXDMA_BEQ_MAP(x)		(((x) & 0x3) << 8)
+#define _TXDMA_VIQ_MAP(x)		(((x) & 0x3) << 6)
+#define _TXDMA_VOQ_MAP(x)		(((x) & 0x3) << 4)
 
 #define QUEUE_LOW			1
 #define QUEUE_NORMAL			2

drivers/staging/r8188eu/include/rtw_mlme.h

@@ -101,17 +101,17 @@ struct rt_link_detect {
 
 struct profile_info {
 	u8	ssidlen;
-	u8	ssid[ WLAN_SSID_MAXLEN ];
-	u8	peermac[ ETH_ALEN ];
+	u8	ssid[WLAN_SSID_MAXLEN];
+	u8	peermac[ETH_ALEN];
 };
 
 struct tx_invite_req_info {
 	u8	token;
 	u8	benable;
-	u8	go_ssid[ WLAN_SSID_MAXLEN ];
+	u8	go_ssid[WLAN_SSID_MAXLEN];
 	u8	ssidlen;
-	u8	go_bssid[ ETH_ALEN ];
-	u8	peer_macaddr[ ETH_ALEN ];
+	u8	go_bssid[ETH_ALEN];
+	u8	peer_macaddr[ETH_ALEN];
 	u8	operating_ch;	/* This information will be set by using the
 				 * p2p_set op_ch=x */
 	u8	peer_ch;	/* The listen channel for peer P2P device */
@@ -154,9 +154,9 @@ struct tx_nego_req_info {
 };
 
 struct group_id_info {
-	u8	go_device_addr[ ETH_ALEN ];	/* The GO's device address of
+	u8	go_device_addr[ETH_ALEN];	/* The GO's device address of
 						 * this P2P group */
-	u8	ssid[ WLAN_SSID_MAXLEN ];	/* The SSID of this P2P group */
+	u8	ssid[WLAN_SSID_MAXLEN];	/* The SSID of this P2P group */
 };
 
 struct scan_limit_info {
@@ -459,7 +459,7 @@ static inline void set_fwstate(struct mlme_priv *pmlmepriv, int state)
 {
 	pmlmepriv->fw_state |= state;
 	/* FOR HW integration */
-	if (_FW_UNDER_SURVEY==state)
+	if (_FW_UNDER_SURVEY == state)
 		pmlmepriv->bScanInProcess = true;
 }
 
@@ -467,7 +467,7 @@ static inline void _clr_fwstate_(struct mlme_priv *pmlmepriv, int state)
 {
 	pmlmepriv->fw_state &= ~state;
 	/* FOR HW integration */
-	if (_FW_UNDER_SURVEY==state)
+	if (_FW_UNDER_SURVEY == state)
 		pmlmepriv->bScanInProcess = false;
 }
 

drivers/staging/r8188eu/include/rtw_mlme_ext.h

@@ -729,7 +729,7 @@ enum rtw_c2h_event {
 	GEN_EVT_CODE(_Survey),	 /*8*/
 	GEN_EVT_CODE(_SurveyDone),	 /*9*/
 
-	GEN_EVT_CODE(_JoinBss) , /*10*/
+	GEN_EVT_CODE(_JoinBss), /*10*/
 	GEN_EVT_CODE(_AddSTA),
 	GEN_EVT_CODE(_DelSTA),
 	GEN_EVT_CODE(_AtimDone),