Commit c62af70f authored by Russell King's avatar Russell King

Merge branch 'sa1100' into for-next

parents 9de44aa4 22b67acd
......@@ -3,7 +3,7 @@
#
# Common support
obj-y := clock.o generic.o irq.o #nmi-oopser.o
obj-y := clock.o generic.o #nmi-oopser.o
# Specific board support
obj-$(CONFIG_SA1100_ASSABET) += assabet.o
......
......@@ -20,9 +20,12 @@
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/irqchip/irq-sa11x0.h>
#include <video/sa1100fb.h>
#include <soc/sa1100/pwer.h>
#include <asm/div64.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
......@@ -375,6 +378,18 @@ void __init sa1100_timer_init(void)
pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x90000000), 3686400);
}
static struct resource irq_resource =
DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
void __init sa1100_init_irq(void)
{
request_resource(&iomem_resource, &irq_resource);
sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start);
sa1100_init_gpio();
}
/*
* Disable the memory bus request/grant signals on the SA1110 to
* ensure that we don't receive spurious memory requests. We set
......@@ -416,3 +431,25 @@ void sa1110_mb_enable(void)
local_irq_restore(flags);
}
int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on)
{
if (on)
PWER |= BIT(gpio);
else
PWER &= ~BIT(gpio);
return 0;
}
int sa11x0_sc_set_wake(unsigned int irq, unsigned int on)
{
if (BIT(irq) != IC_RTCAlrm)
return -EINVAL;
if (on)
PWER |= PWER_RTC;
else
PWER &= ~PWER_RTC;
return 0;
}
......@@ -47,3 +47,4 @@ obj-$(CONFIG_KEYSTONE_IRQ) += irq-keystone.o
obj-$(CONFIG_MIPS_GIC) += irq-mips-gic.o
obj-$(CONFIG_ARCH_MEDIATEK) += irq-mtk-sysirq.o
obj-$(CONFIG_ARCH_DIGICOLOR) += irq-digicolor.o
obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
/*
* linux/arch/arm/mach-sa1100/irq.c
*
* Copyright (C) 2015 Dmitry Eremin-Solenikov
* Copyright (C) 1999-2001 Nicolas Pitre
*
* Generic IRQ handling for the SA11x0, GPIO 11-27 IRQ demultiplexing.
* Generic IRQ handling for the SA11x0.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -15,16 +14,21 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/ioport.h>
#include <linux/syscore_ops.h>
#include <linux/irqchip/irq-sa11x0.h>
#include <soc/sa1100/pwer.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
#include "generic.h"
#define ICIP 0x00 /* IC IRQ Pending reg. */
#define ICMR 0x04 /* IC Mask Reg. */
#define ICLR 0x08 /* IC Level Reg. */
#define ICCR 0x0C /* IC Control Reg. */
#define ICFP 0x10 /* IC FIQ Pending reg. */
#define ICPR 0x20 /* IC Pending Reg. */
static void __iomem *iobase;
/*
* We don't need to ACK IRQs on the SA1100 unless they're GPIOs
......@@ -32,27 +36,25 @@
*/
static void sa1100_mask_irq(struct irq_data *d)
{
ICMR &= ~BIT(d->hwirq);
u32 reg;
reg = readl_relaxed(iobase + ICMR);
reg &= ~BIT(d->hwirq);
writel_relaxed(reg, iobase + ICMR);
}
static void sa1100_unmask_irq(struct irq_data *d)
{
ICMR |= BIT(d->hwirq);
u32 reg;
reg = readl_relaxed(iobase + ICMR);
reg |= BIT(d->hwirq);
writel_relaxed(reg, iobase + ICMR);
}
/*
* Apart form GPIOs, only the RTC alarm can be a wakeup event.
*/
static int sa1100_set_wake(struct irq_data *d, unsigned int on)
{
if (BIT(d->hwirq) == IC_RTCAlrm) {
if (on)
PWER |= PWER_RTC;
else
PWER &= ~PWER_RTC;
return 0;
}
return -EINVAL;
return sa11x0_sc_set_wake(d->hwirq, on);
}
static struct irq_chip sa1100_normal_chip = {
......@@ -80,9 +82,6 @@ static const struct irq_domain_ops sa1100_normal_irqdomain_ops = {
static struct irq_domain *sa1100_normal_irqdomain;
static struct resource irq_resource =
DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
static struct sa1100irq_state {
unsigned int saved;
unsigned int icmr;
......@@ -95,16 +94,14 @@ static int sa1100irq_suspend(void)
struct sa1100irq_state *st = &sa1100irq_state;
st->saved = 1;
st->icmr = ICMR;
st->iclr = ICLR;
st->iccr = ICCR;
st->icmr = readl_relaxed(iobase + ICMR);
st->iclr = readl_relaxed(iobase + ICLR);
st->iccr = readl_relaxed(iobase + ICCR);
/*
* Disable all GPIO-based interrupts.
*/
ICMR &= ~(IC_GPIO11_27|IC_GPIO10|IC_GPIO9|IC_GPIO8|IC_GPIO7|
IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2|
IC_GPIO1|IC_GPIO0);
writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR);
return 0;
}
......@@ -114,10 +111,10 @@ static void sa1100irq_resume(void)
struct sa1100irq_state *st = &sa1100irq_state;
if (st->saved) {
ICCR = st->iccr;
ICLR = st->iclr;
writel_relaxed(st->iccr, iobase + ICCR);
writel_relaxed(st->iclr, iobase + ICLR);
ICMR = st->icmr;
writel_relaxed(st->icmr, iobase + ICMR);
}
}
......@@ -140,8 +137,8 @@ sa1100_handle_irq(struct pt_regs *regs)
uint32_t icip, icmr, mask;
do {
icip = (ICIP);
icmr = (ICMR);
icip = readl_relaxed(iobase + ICIP);
icmr = readl_relaxed(iobase + ICMR);
mask = icip & icmr;
if (mask == 0)
......@@ -152,27 +149,27 @@ sa1100_handle_irq(struct pt_regs *regs)
} while (1);
}
void __init sa1100_init_irq(void)
void __init sa11x0_init_irq_nodt(int irq_start, resource_size_t io_start)
{
request_resource(&iomem_resource, &irq_resource);
iobase = ioremap(io_start, SZ_64K);
if (WARN_ON(!iobase))
return;
/* disable all IRQs */
ICMR = 0;
writel_relaxed(0, iobase + ICMR);
/* all IRQs are IRQ, not FIQ */
ICLR = 0;
writel_relaxed(0, iobase + ICLR);
/*
* Whatever the doc says, this has to be set for the wait-on-irq
* instruction to work... on a SA1100 rev 9 at least.
*/
ICCR = 1;
writel_relaxed(1, iobase + ICCR);
sa1100_normal_irqdomain = irq_domain_add_simple(NULL,
32, IRQ_GPIO0_SC,
32, irq_start,
&sa1100_normal_irqdomain_ops, NULL);
set_handle_irq(sa1100_handle_irq);
sa1100_init_gpio();
}
/*
* Generic IRQ handling for the SA11x0.
*
* Copyright (C) 2015 Dmitry Eremin-Solenikov
* Copyright (C) 1999-2001 Nicolas Pitre
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_SA11x0_H
#define __INCLUDE_LINUX_IRQCHIP_IRQ_SA11x0_H
void __init sa11x0_init_irq_nodt(int irq_start, resource_size_t io_start);
#endif
#ifndef SOC_SA1100_PWER_H
#define SOC_SA1100_PWER_H
/*
* Copyright (C) 2015, Dmitry Eremin-Solenikov
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on);
int sa11x0_sc_set_wake(unsigned int irq, unsigned int on);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment