ARM: dts: qcom: msm8660: fix PMIC node labels

Change PM8058 node labels to start with pm8058_ prefix, following other
Qualcomm PMIC device nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-11-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts

@@ -71,7 +71,7 @@ cm3605 {
 		/* Trig on both edges - getting close or far away */
 		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
 		/* MPP05 analog input to the XOADC */
-		io-channels = <&xoadc 0x00 0x05>;
+		io-channels = <&pm8058_xoadc 0x00 0x05>;
 		io-channel-names = "aout";
 		pinctrl-names = "default";
 		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
@@ -944,7 +944,7 @@ irq-pins {
 	};
 };
 
-&xoadc {
+&pm8058_xoadc {
 	/* Reference voltage 2.2 V */
 	xoadc-ref-supply = <&pm8058_l18>;
 

arch/arm/boot/dts/qcom/qcom-msm8660.dtsi

@@ -80,13 +80,13 @@ sleep-clk {
 	 */
 	iio-hwmon {
 		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+		io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
 	};
 
 	soc: soc {
@@ -390,7 +390,7 @@ pm8058_keypad: keypad@148 {
 					row-hold = <91500>;
 				};
 
-				xoadc: xoadc@197 {
+				pm8058_xoadc: xoadc@197 {
 					compatible = "qcom,pm8058-adc";
 					reg = <0x197>;
 					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;