Merge tag 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "Battery/charger driver changes:

   - convert charger-manager binding to YAML

   - drop bd70528-charger driver

   - drop pm2301-charger driver

   - introduce rt5033-battery driver

   - misc improvements and fixes"

* tag 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits)
  power: supply: ab8500: Fix an old bug
  power: supply: axp288_fuel_gauge: remove redundant continue statement
  power: supply: axp288_fuel_gauge: Make "T3 MRD" no_battery_list DMI entry more generic
  power: supply: axp288_fuel_gauge: Rename fuel_gauge_blacklist to no_battery_list
  power: supply: bq24190_charger: drop of_match_ptr() from device ID table
  drivers: power: add missing MODULE_DEVICE_TABLE in keystone-reset.c
  power: supply: ab8500: add missing MODULE_DEVICE_TABLE
  power: supply: charger-manager: add missing MODULE_DEVICE_TABLE
  power: reset: regulator-poweroff: add missing MODULE_DEVICE_TABLE
  power: supply: cpcap-charger: get the battery inserted infomation from cpcap-battery
  power: supply: cpcap-battery: invalidate config when incompatible measurements are read
  power: supply: axp20x_battery: allow disabling battery charging
  power: supply: max17040: drop unused platform data support
  power: supply: max17040: simplify POWER_SUPPLY_PROP_ONLINE
  power: supply: max17040: remove non-working POWER_SUPPLY_PROP_STATUS
  power: reset: at91-sama5d2_shdwc: Remove redundant error printing in at91_shdwc_probe()
  power: reset: gpio-poweroff: add missing MODULE_DEVICE_TABLE
  power: supply: rt5033_battery: Fix device tree enumeration
  dt-bindings: power: supply: Add DT schema for richtek,rt5033-battery
  power: supply: Drop BD70528 support
  ...

Documentation/devicetree/bindings/power/supply/charger-manager.txt

-charger-manager bindings
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Required properties :
- - compatible : "charger-manager"
- - <>-supply : for regulator consumer, named according to cm-regulator-name
- - cm-chargers : name of chargers
- - cm-fuel-gauge : name of battery fuel gauge
- - subnode <regulator> :
-	- cm-regulator-name : name of charger regulator
-	- subnode <cable> :
-		- cm-cable-name : name of charger cable - one of USB, USB-HOST,
-			SDP, DCP, CDP, ACA, FAST-CHARGER, SLOW-CHARGER, WPT,
-			PD, DOCK, JIG, or MECHANICAL
-		- cm-cable-extcon : name of extcon dev
-(optional)	- cm-cable-min : minimum current of cable
-(optional)	- cm-cable-max : maximum current of cable
-
-Optional properties :
- - cm-name : charger manager's name (default : "battery")
- - cm-poll-mode : polling mode - 0 for disabled, 1 for always, 2 for when
-	external power is connected, or 3 for when charging.  If not present,
-	then polling is disabled
- - cm-poll-interval : polling interval (in ms)
- - cm-battery-stat : battery status - 0 for battery always present, 1 for no
-	battery, 2 to check presence via fuel gauge, or 3 to check presence
-	via charger
- - cm-fullbatt-vchkdrop-volt : voltage drop (in uV) before restarting charging
- - cm-fullbatt-voltage : voltage (in uV) of full battery
- - cm-fullbatt-soc : state of charge to consider as full battery
- - cm-fullbatt-capacity : capcity (in uAh) to consider as full battery
- - cm-thermal-zone : name of external thermometer's thermal zone
- - cm-battery-* : threshold battery temperature for charging
-	-cold : critical cold temperature of battery for charging
-	-cold-in-minus : flag that cold temperature is in minus degrees
-	-hot : critical hot temperature of battery for charging
-	-temp-diff : temperature difference to allow recharging
- - cm-dis/charging-max = limits of charging duration
-
-Deprecated properties:
- - cm-num-chargers
- - cm-fullbatt-vchkdrop-ms
-
-Example :
-	charger-manager@0 {
-		compatible = "charger-manager";
-		chg-reg-supply = <&charger_regulator>;
-
-		cm-name = "battery";
-		/* Always polling ON : 30s */
-		cm-poll-mode = <1>;
-		cm-poll-interval = <30000>;
-
-		cm-fullbatt-vchkdrop-volt = <150000>;
-		cm-fullbatt-soc = <100>;
-
-		cm-battery-stat = <3>;
-
-		cm-chargers = "charger0", "charger1", "charger2";
-
-		cm-fuel-gauge = "fuelgauge0";
-
-		cm-thermal-zone = "thermal_zone.1"
-		/* in deci centigrade */
-		cm-battery-cold = <50>;
-		cm-battery-cold-in-minus;
-		cm-battery-hot = <800>;
-		cm-battery-temp-diff = <100>;
-
-		/* Allow charging for 5hr */
-		cm-charging-max = <18000000>;
-		/* Allow discharging for 2hr */
-		cm-discharging-max = <7200000>;
-
-		regulator@0 {
-			cm-regulator-name = "chg-reg";
-			cable@0 {
-				cm-cable-name = "USB";
-				cm-cable-extcon = "extcon-dev.0";
-				cm-cable-min = <475000>;
-				cm-cable-max = <500000>;
-			};
-			cable@1 {
-				cm-cable-name = "SDP";
-				cm-cable-extcon = "extcon-dev.0";
-				cm-cable-min = <650000>;
-				cm-cable-max = <675000>;
-			};
-		};
-
-	};

Documentation/devicetree/bindings/power/supply/charger-manager.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/charger-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Charger Manager
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Binding for the legacy charger manager driver.
+  Please do not use for new products.
+
+properties:
+  compatible:
+    const: charger-manager
+
+  cm-chargers:
+    description: name of chargers
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  cm-num-chargers:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+
+  cm-fuel-gauge:
+    description: name of battery fuel gauge
+    $ref: /schemas/types.yaml#/definitions/string
+
+  cm-name:
+    description: name of the charger manager
+    default: battery
+    $ref: /schemas/types.yaml#/definitions/string
+
+  cm-poll-mode:
+    description: polling mode
+    default: 0
+    enum:
+      - 0 # disabled
+      - 1 # always
+      - 2 # when external power is connected
+      - 3 # when charging
+
+  cm-poll-interval:
+    description: polling interval (in ms)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-stat:
+    description: battery status
+    enum:
+      - 0 # battery always present
+      - 1 # no battery
+      - 2 # check presence via fuel gauge
+      - 3 # check presence via charger
+
+  cm-fullbatt-vchkdrop-volt:
+    description: voltage drop before restarting charging in uV
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-fullbatt-vchkdrop-ms:
+    deprecated: true
+
+  cm-fullbatt-voltage:
+    description: voltage of full battery in uV
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-fullbatt-soc:
+    description: state of charge to consider as full battery in %
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-fullbatt-capacity:
+    description: capcity to consider as full battery in uAh
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-thermal-zone:
+    description: name of external thermometer's thermal zone
+    $ref: /schemas/types.yaml#/definitions/string
+
+  cm-discharging-max:
+    description: limits of discharging duration in ms
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-charging-max:
+    description: limits of charging duration in ms
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-cold:
+    description: critical cold temperature of battery for charging in deci-degree celsius
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-cold-in-minus:
+    description: if set cm-battery-cold temperature is in minus degrees
+    type: boolean
+
+  cm-battery-hot:
+    description: critical hot temperature of battery for charging in deci-degree celsius
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-temp-diff:
+    description: temperature difference to allow recharging in deci-degree celsius
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+  "-supply$":
+    description: regulator consumer, named according to cm-regulator-name
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  "^regulator[@-][0-9]$":
+    type: object
+    properties:
+      cm-regulator-name:
+        description: name of charger regulator
+        $ref: /schemas/types.yaml#/definitions/string
+
+    required:
+      - cm-regulator-name
+
+    additionalProperties: false
+
+    patternProperties:
+      "^cable[@-][0-9]$":
+        type: object
+        properties:
+          cm-cable-name:
+            description: name of charger cable
+            enum:
+              - USB
+              - USB-HOST
+              - SDP
+              - DCP
+              - CDP
+              - ACA
+              - FAST-CHARGER
+              - SLOW-CHARGER
+              - WPT
+              - PD
+              - DOCK
+              - JIG
+              - MECHANICAL
+
+          cm-cable-extcon:
+            description: name of extcon dev
+            $ref: /schemas/types.yaml#/definitions/string
+
+          cm-cable-min:
+            description: minimum current of cable in uA
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          cm-cable-max:
+            description: maximum current of cable in uA
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - cm-cable-name
+          - cm-cable-extcon
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - cm-chargers
+  - cm-fuel-gauge
+
+additionalProperties: false
+
+examples:
+  - |
+    charger-manager {
+        compatible = "charger-manager";
+        chg-reg-supply = <&charger_regulator>;
+
+        cm-name = "battery";
+        /* Always polling ON : 30s */
+        cm-poll-mode = <1>;
+        cm-poll-interval = <30000>;
+
+        cm-fullbatt-vchkdrop-volt = <150000>;
+        cm-fullbatt-soc = <100>;
+
+        cm-battery-stat = <3>;
+
+        cm-chargers = "charger0", "charger1", "charger2";
+
+        cm-fuel-gauge = "fuelgauge0";
+
+        cm-thermal-zone = "thermal_zone.1";
+        /* in deci centigrade */
+        cm-battery-cold = <50>;
+        cm-battery-cold-in-minus;
+        cm-battery-hot = <800>;
+        cm-battery-temp-diff = <100>;
+
+        /* Allow charging for 5hr */
+        cm-charging-max = <18000000>;
+        /* Allow discharging for 2hr */
+        cm-discharging-max = <7200000>;
+
+        regulator-0 {
+            cm-regulator-name = "chg-reg";
+            cable-0 {
+                cm-cable-name = "USB";
+                cm-cable-extcon = "extcon-dev.0";
+                cm-cable-min = <475000>;
+                cm-cable-max = <500000>;
+            };
+            cable-1 {
+                cm-cable-name = "SDP";
+                cm-cable-extcon = "extcon-dev.0";
+                cm-cable-min = <650000>;
+                cm-cable-max = <675000>;
+            };
+        };
+    };

Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml

@@ -89,7 +89,7 @@ examples:
         reg = <0x36>;
         maxim,alert-low-soc-level = <10>;
         interrupt-parent = <&gpio7>;
-        interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+        interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
         wakeup-source;
       };
     };

Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/richtek,rt5033-battery.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Richtek RT5033 PMIC Fuel Gauge
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: richtek,rt5033-battery
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@35 {
+        compatible = "richtek,rt5033-battery";
+        reg = <0x35>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@35 {
+        compatible = "richtek,rt5033-battery";
+        reg = <0x35>;
+        interrupt-parent = <&msmgpio>;
+        interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+      };
+    };

MAINTAINERS

@@ -14827,6 +14827,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git
 F:	Documentation/ABI/testing/sysfs-class-power
 F:	Documentation/devicetree/bindings/power/supply/
 F:	drivers/power/supply/
+F:	include/linux/power/
 F:	include/linux/power_supply.h
 
 POWERNV OPERATOR PANEL LCD DISPLAY DRIVER
@@ -16213,7 +16214,7 @@ W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	drivers/s390/scsi/zfcp_*
 
 S3C ADC BATTERY DRIVER
-M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
 L:	linux-samsung-soc@vger.kernel.org
 S:	Odd Fixes
 F:	drivers/power/supply/s3c_adc_battery.c

drivers/power/reset/at91-sama5d2_shdwc.c

@@ -351,10 +351,8 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	at91_shdwc->shdwc_base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(at91_shdwc->shdwc_base)) {
-		dev_err(&pdev->dev, "Could not map reset controller address\n");
+	if (IS_ERR(at91_shdwc->shdwc_base))
 		return PTR_ERR(at91_shdwc->shdwc_base);
-	}
 
 	match = of_match_node(at91_shdwc_of_match, pdev->dev.of_node);
 	at91_shdwc->rcfg = match->data;

drivers/power/reset/gpio-poweroff.c

@@ -90,6 +90,7 @@ static const struct of_device_id of_gpio_poweroff_match[] = {
 	{ .compatible = "gpio-poweroff", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, of_gpio_poweroff_match);
 
 static struct platform_driver gpio_poweroff_driver = {
 	.probe = gpio_poweroff_probe,

drivers/power/reset/keystone-reset.c

@@ -71,6 +71,7 @@ static const struct of_device_id rsctrl_of_match[] = {
 	{.compatible = "ti,keystone-reset", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, rsctrl_of_match);
 
 static int rsctrl_probe(struct platform_device *pdev)
 {

drivers/power/reset/regulator-poweroff.c

@@ -64,6 +64,7 @@ static const struct of_device_id of_regulator_poweroff_match[] = {
 	{ .compatible = "regulator-poweroff", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, of_regulator_poweroff_match);
 
 static struct platform_driver regulator_poweroff_driver = {
 	.probe = regulator_poweroff_probe,

drivers/power/supply/Kconfig

@@ -712,7 +712,8 @@ config BATTERY_GOLDFISH
 
 config BATTERY_RT5033
 	tristate "RT5033 fuel gauge support"
-	depends on MFD_RT5033
+	depends on I2C
+	select REGMAP_I2C
 	help
 	  This adds support for battery fuel gauge in Richtek RT5033 PMIC.
 	  The fuelgauge calculates and determines the battery state of charge
@@ -760,15 +761,6 @@ config CHARGER_UCS1002
 	  Say Y to enable support for Microchip UCS1002 Programmable
 	  USB Port Power Controller with Charger Emulation.
 
-config CHARGER_BD70528
-	tristate "ROHM bd70528 charger driver"
-	depends on MFD_ROHM_BD70528
-	select LINEAR_RANGES
-	help
-	  Say Y here to enable support for getting battery status
-	  information and altering charger configurations from charger
-	  block of the ROHM BD70528 Power Management IC.
-
 config CHARGER_BD99954
 	tristate "ROHM bd99954 charger driver"
 	depends on I2C

drivers/power/supply/Makefile

@@ -60,7 +60,7 @@ obj-$(CONFIG_BATTERY_TWL4030_MADC)	+= twl4030_madc_battery.o
 obj-$(CONFIG_CHARGER_88PM860X)	+= 88pm860x_charger.o
 obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
 obj-$(CONFIG_BATTERY_RX51)	+= rx51_battery.o
-obj-$(CONFIG_AB8500_BM)		+= ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o pm2301_charger.o
+obj-$(CONFIG_AB8500_BM)		+= ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o
 obj-$(CONFIG_CHARGER_CPCAP)	+= cpcap-charger.o
 obj-$(CONFIG_CHARGER_ISP1704)	+= isp1704_charger.o
 obj-$(CONFIG_CHARGER_MAX8903)	+= max8903_charger.o
@@ -96,7 +96,6 @@ obj-$(CONFIG_CHARGER_CROS_USBPD)	+= cros_usbpd-charger.o
 obj-$(CONFIG_CHARGER_SC2731)	+= sc2731_charger.o
 obj-$(CONFIG_FUEL_GAUGE_SC27XX)	+= sc27xx_fuel_gauge.o
 obj-$(CONFIG_CHARGER_UCS1002)	+= ucs1002_power.o
-obj-$(CONFIG_CHARGER_BD70528)	+= bd70528-charger.o
 obj-$(CONFIG_CHARGER_BD99954)	+= bd99954-charger.o
 obj-$(CONFIG_CHARGER_WILCO)	+= wilco-charger.o
 obj-$(CONFIG_RN5T618_POWER)	+= rn5t618_power.o

drivers/power/supply/ab8500-bm.h

@@ -506,9 +506,6 @@ struct abx500_bm_data {
 	int usb_safety_tmr_h;
 	int bkup_bat_v;
 	int bkup_bat_i;
-	bool autopower_cfg;
-	bool ac_enabled;
-	bool usb_enabled;
 	bool no_maintenance;
 	bool capacity_scaling;
 	bool chg_unknown_bat;
@@ -730,4 +727,8 @@ int ab8500_bm_of_probe(struct device *dev,
 		       struct device_node *np,
 		       struct abx500_bm_data *bm);
 
+extern struct platform_driver ab8500_fg_driver;
+extern struct platform_driver ab8500_btemp_driver;
+extern struct platform_driver abx500_chargalg_driver;
+
 #endif /* _AB8500_CHARGER_H_ */

drivers/power/supply/ab8500-chargalg.h

@@ -15,7 +15,7 @@
  * - POWER_SUPPLY_TYPE_USB,
  * because only them store as drv_data pointer to struct ux500_charger.
  */
-#define psy_to_ux500_charger(x) power_supply_get_drvdata(psy)
+#define psy_to_ux500_charger(x) power_supply_get_drvdata(x)
 
 /* Forward declaration */
 struct ux500_charger;

drivers/power/supply/ab8500_btemp.c

@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/device.h>
+#include <linux/component.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
@@ -932,26 +933,6 @@ static int __maybe_unused ab8500_btemp_suspend(struct device *dev)
 	return 0;
 }
 
-static int ab8500_btemp_remove(struct platform_device *pdev)
-{
-	struct ab8500_btemp *di = platform_get_drvdata(pdev);
-	int i, irq;
-
-	/* Disable interrupts */
-	for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) {
-		irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
-		free_irq(irq, di);
-	}
-
-	/* Delete the work queue */
-	destroy_workqueue(di->btemp_wq);
-
-	flush_scheduled_work();
-	power_supply_unregister(di->btemp_psy);
-
-	return 0;
-}
-
 static char *supply_interface[] = {
 	"ab8500_chargalg",
 	"ab8500_fg",
@@ -966,9 +947,42 @@ static const struct power_supply_desc ab8500_btemp_desc = {
 	.external_power_changed	= ab8500_btemp_external_power_changed,
 };
 
+static int ab8500_btemp_bind(struct device *dev, struct device *master,
+			     void *data)
+{
+	struct ab8500_btemp *di = dev_get_drvdata(dev);
+
+	/* Create a work queue for the btemp */
+	di->btemp_wq =
+		alloc_workqueue("ab8500_btemp_wq", WQ_MEM_RECLAIM, 0);
+	if (di->btemp_wq == NULL) {
+		dev_err(dev, "failed to create work queue\n");
+		return -ENOMEM;
+	}
+
+	/* Kick off periodic temperature measurements */
+	ab8500_btemp_periodic(di, true);
+
+	return 0;
+}
+
+static void ab8500_btemp_unbind(struct device *dev, struct device *master,
+				void *data)
+{
+	struct ab8500_btemp *di = dev_get_drvdata(dev);
+
+	/* Delete the work queue */
+	destroy_workqueue(di->btemp_wq);
+	flush_scheduled_work();
+}
+
+static const struct component_ops ab8500_btemp_component_ops = {
+	.bind = ab8500_btemp_bind,
+	.unbind = ab8500_btemp_unbind,
+};
+
 static int ab8500_btemp_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
 	struct power_supply_config psy_cfg = {};
 	struct device *dev = &pdev->dev;
 	struct ab8500_btemp *di;
@@ -981,12 +995,6 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 
 	di->bm = &ab8500_bm_data;
 
-	ret = ab8500_bm_of_probe(dev, np, di->bm);
-	if (ret) {
-		dev_err(dev, "failed to get battery information\n");
-		return ret;
-	}
-
 	/* get parent data */
 	di->dev = dev;
 	di->parent = dev_get_drvdata(pdev->dev.parent);
@@ -1011,14 +1019,6 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 	psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
 	psy_cfg.drv_data = di;
 
-	/* Create a work queue for the btemp */
-	di->btemp_wq =
-		alloc_workqueue("ab8500_btemp_wq", WQ_MEM_RECLAIM, 0);
-	if (di->btemp_wq == NULL) {
-		dev_err(dev, "failed to create work queue\n");
-		return -ENOMEM;
-	}
-
 	/* Init work for measuring temperature periodically */
 	INIT_DEFERRABLE_WORK(&di->btemp_periodic_work,
 		ab8500_btemp_periodic_work);
@@ -1031,7 +1031,7 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 		AB8500_BTEMP_HIGH_TH, &val);
 	if (ret < 0) {
 		dev_err(dev, "%s ab8500 read failed\n", __func__);
-		goto free_btemp_wq;
+		return ret;
 	}
 	switch (val) {
 	case BTEMP_HIGH_TH_57_0:
@@ -1050,30 +1050,28 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 	}
 
 	/* Register BTEMP power supply class */
-	di->btemp_psy = power_supply_register(dev, &ab8500_btemp_desc,
-					      &psy_cfg);
+	di->btemp_psy = devm_power_supply_register(dev, &ab8500_btemp_desc,
+						   &psy_cfg);
 	if (IS_ERR(di->btemp_psy)) {
 		dev_err(dev, "failed to register BTEMP psy\n");
-		ret = PTR_ERR(di->btemp_psy);
-		goto free_btemp_wq;
+		return PTR_ERR(di->btemp_psy);
 	}
 
 	/* Register interrupts */
 	for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) {
 		irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
-		if (irq < 0) {
-			ret = irq;
-			goto free_irq;
-		}
+		if (irq < 0)
+			return irq;
 
-		ret = request_threaded_irq(irq, NULL, ab8500_btemp_irq[i].isr,
+		ret = devm_request_threaded_irq(dev, irq, NULL,
+			ab8500_btemp_irq[i].isr,
 			IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
 			ab8500_btemp_irq[i].name, di);
 
 		if (ret) {
 			dev_err(dev, "failed to request %s IRQ %d: %d\n"
 				, ab8500_btemp_irq[i].name, irq, ret);
-			goto free_irq;
+			return ret;
 		}
 		dev_dbg(dev, "Requested %s IRQ %d: %d\n",
 			ab8500_btemp_irq[i].name, irq, ret);
@@ -1081,23 +1079,16 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, di);
 
-	/* Kick off periodic temperature measurements */
-	ab8500_btemp_periodic(di, true);
 	list_add_tail(&di->node, &ab8500_btemp_list);
 
-	return ret;
+	return component_add(dev, &ab8500_btemp_component_ops);
+}
 
-free_irq:
-	/* We also have to free all successfully registered irqs */
-	for (i = i - 1; i >= 0; i--) {
-		irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
-		free_irq(irq, di);
-	}
+static int ab8500_btemp_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &ab8500_btemp_component_ops);
 
-	power_supply_unregister(di->btemp_psy);
-free_btemp_wq:
-	destroy_workqueue(di->btemp_wq);
-	return ret;
+	return 0;
 }
 
 static SIMPLE_DEV_PM_OPS(ab8500_btemp_pm_ops, ab8500_btemp_suspend, ab8500_btemp_resume);
@@ -1106,8 +1097,9 @@ static const struct of_device_id ab8500_btemp_match[] = {
 	{ .compatible = "stericsson,ab8500-btemp", },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, ab8500_btemp_match);
 
-static struct platform_driver ab8500_btemp_driver = {
+struct platform_driver ab8500_btemp_driver = {
 	.probe = ab8500_btemp_probe,
 	.remove = ab8500_btemp_remove,
 	.driver = {
@@ -1116,20 +1108,6 @@ static struct platform_driver ab8500_btemp_driver = {
 		.pm = &ab8500_btemp_pm_ops,
 	},
 };
-
-static int __init ab8500_btemp_init(void)
-{
-	return platform_driver_register(&ab8500_btemp_driver);
-}
-
-static void __exit ab8500_btemp_exit(void)
-{
-	platform_driver_unregister(&ab8500_btemp_driver);
-}
-
-device_initcall(ab8500_btemp_init);
-module_exit(ab8500_btemp_exit);
-
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy");
 MODULE_ALIAS("platform:ab8500-btemp");

drivers/power/supply/ab8500_fg.c

@@ -17,6 +17,7 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/component.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
@@ -59,7 +60,7 @@
 	((y1) + ((((y2) - (y1)) * ((x) - (x1))) / ((x2) - (x1))));
 
 /**
- * struct ab8500_fg_interrupts - ab8500 fg interupts
+ * struct ab8500_fg_interrupts - ab8500 fg interrupts
  * @name:	name of the interrupt
  * @isr		function pointer to the isr
  */
@@ -2980,27 +2981,6 @@ static int __maybe_unused ab8500_fg_suspend(struct device *dev)
 	return 0;
 }
 
-static int ab8500_fg_remove(struct platform_device *pdev)
-{
-	int ret = 0;
-	struct ab8500_fg *di = platform_get_drvdata(pdev);
-
-	list_del(&di->node);
-
-	/* Disable coulomb counter */
-	ret = ab8500_fg_coulomb_counter(di, false);
-	if (ret)
-		dev_err(di->dev, "failed to disable coulomb counter\n");
-
-	destroy_workqueue(di->fg_wq);
-	ab8500_fg_sysfs_exit(di);
-
-	flush_scheduled_work();
-	ab8500_fg_sysfs_psy_remove_attrs(di);
-	power_supply_unregister(di->fg_psy);
-	return ret;
-}
-
 /* ab8500 fg driver interrupts and their respective isr */
 static struct ab8500_fg_interrupts ab8500_fg_irq[] = {
 	{"NCONV_ACCU", ab8500_fg_cc_convend_handler},
@@ -3024,11 +3004,50 @@ static const struct power_supply_desc ab8500_fg_desc = {
 	.external_power_changed	= ab8500_fg_external_power_changed,
 };
 
+static int ab8500_fg_bind(struct device *dev, struct device *master,
+			  void *data)
+{
+	struct ab8500_fg *di = dev_get_drvdata(dev);
+
+	/* Create a work queue for running the FG algorithm */
+	di->fg_wq = alloc_ordered_workqueue("ab8500_fg_wq", WQ_MEM_RECLAIM);
+	if (di->fg_wq == NULL) {
+		dev_err(dev, "failed to create work queue\n");
+		return -ENOMEM;
+	}
+
+	/* Start the coulomb counter */
+	ab8500_fg_coulomb_counter(di, true);
+	/* Run the FG algorithm */
+	queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+
+	return 0;
+}
+
+static void ab8500_fg_unbind(struct device *dev, struct device *master,
+			     void *data)
+{
+	struct ab8500_fg *di = dev_get_drvdata(dev);
+	int ret;
+
+	/* Disable coulomb counter */
+	ret = ab8500_fg_coulomb_counter(di, false);
+	if (ret)
+		dev_err(dev, "failed to disable coulomb counter\n");
+
+	destroy_workqueue(di->fg_wq);
+	flush_scheduled_work();
+}
+
+static const struct component_ops ab8500_fg_component_ops = {
+	.bind = ab8500_fg_bind,
+	.unbind = ab8500_fg_unbind,
+};
+
 static int ab8500_fg_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
-	struct power_supply_config psy_cfg = {};
 	struct device *dev = &pdev->dev;
+	struct power_supply_config psy_cfg = {};
 	struct ab8500_fg *di;
 	int i, irq;
 	int ret = 0;
@@ -3039,12 +3058,6 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 
 	di->bm = &ab8500_bm_data;
 
-	ret = ab8500_bm_of_probe(dev, np, di->bm);
-	if (ret) {
-		dev_err(dev, "failed to get battery information\n");
-		return ret;
-	}
-
 	mutex_init(&di->cc_lock);
 
 	/* get parent data */
@@ -3074,13 +3087,6 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT);
 	ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT);
 
-	/* Create a work queue for running the FG algorithm */
-	di->fg_wq = alloc_ordered_workqueue("ab8500_fg_wq", WQ_MEM_RECLAIM);
-	if (di->fg_wq == NULL) {
-		dev_err(dev, "failed to create work queue\n");
-		return -ENOMEM;
-	}
-
 	/* Init work for running the fg algorithm instantly */
 	INIT_WORK(&di->fg_work, ab8500_fg_instant_work);
 
@@ -3113,7 +3119,7 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	ret = ab8500_fg_init_hw_registers(di);
 	if (ret) {
 		dev_err(dev, "failed to initialize registers\n");
-		goto free_inst_curr_wq;
+		return ret;
 	}
 
 	/* Consider battery unknown until we're informed otherwise */
@@ -3121,15 +3127,13 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	di->flags.batt_id_received = false;
 
 	/* Register FG power supply class */
-	di->fg_psy = power_supply_register(dev, &ab8500_fg_desc, &psy_cfg);
+	di->fg_psy = devm_power_supply_register(dev, &ab8500_fg_desc, &psy_cfg);
 	if (IS_ERR(di->fg_psy)) {
 		dev_err(dev, "failed to register FG psy\n");
-		ret = PTR_ERR(di->fg_psy);
-		goto free_inst_curr_wq;
+		return PTR_ERR(di->fg_psy);
 	}
 
 	di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
-	ab8500_fg_coulomb_counter(di, true);
 
 	/*
 	 * Initialize completion used to notify completion and start
@@ -3141,19 +3145,18 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	/* Register primary interrupt handlers */
 	for (i = 0; i < ARRAY_SIZE(ab8500_fg_irq); i++) {
 		irq = platform_get_irq_byname(pdev, ab8500_fg_irq[i].name);
-		if (irq < 0) {
-			ret = irq;
-			goto free_irq;
-		}
+		if (irq < 0)
+			return irq;
 
-		ret = request_threaded_irq(irq, NULL, ab8500_fg_irq[i].isr,
+		ret = devm_request_threaded_irq(dev, irq, NULL,
+				  ab8500_fg_irq[i].isr,
 				  IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
 				  ab8500_fg_irq[i].name, di);
 
 		if (ret != 0) {
 			dev_err(dev, "failed to request %s IRQ %d: %d\n",
 				ab8500_fg_irq[i].name, irq, ret);
-			goto free_irq;
+			return ret;
 		}
 		dev_dbg(dev, "Requested %s IRQ %d: %d\n",
 			ab8500_fg_irq[i].name, irq, ret);
@@ -3168,14 +3171,14 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	ret = ab8500_fg_sysfs_init(di);
 	if (ret) {
 		dev_err(dev, "failed to create sysfs entry\n");
-		goto free_irq;
+		return ret;
 	}
 
 	ret = ab8500_fg_sysfs_psy_create_attrs(di);
 	if (ret) {
 		dev_err(dev, "failed to create FG psy\n");
 		ab8500_fg_sysfs_exit(di);
-		goto free_irq;
+		return ret;
 	}
 
 	/* Calibrate the fg first time */
@@ -3185,24 +3188,21 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	/* Use room temp as default value until we get an update from driver. */
 	di->bat_temp = 210;
 
-	/* Run the FG algorithm */
-	queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
-
 	list_add_tail(&di->node, &ab8500_fg_list);
 
-	return ret;
+	return component_add(dev, &ab8500_fg_component_ops);
+}
 
-free_irq:
-	/* We also have to free all registered irqs */
-	while (--i >= 0) {
-		/* Last assignment of i from primary interrupt handlers */
-		irq = platform_get_irq_byname(pdev, ab8500_fg_irq[i].name);
-		free_irq(irq, di);
-	}
+static int ab8500_fg_remove(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct ab8500_fg *di = platform_get_drvdata(pdev);
+
+	component_del(&pdev->dev, &ab8500_fg_component_ops);
+	list_del(&di->node);
+	ab8500_fg_sysfs_exit(di);
+	ab8500_fg_sysfs_psy_remove_attrs(di);
 
-	power_supply_unregister(di->fg_psy);
-free_inst_curr_wq:
-	destroy_workqueue(di->fg_wq);
 	return ret;
 }
 
@@ -3212,8 +3212,9 @@ static const struct of_device_id ab8500_fg_match[] = {
 	{ .compatible = "stericsson,ab8500-fg", },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, ab8500_fg_match);
 
-static struct platform_driver ab8500_fg_driver = {
+struct platform_driver ab8500_fg_driver = {
 	.probe = ab8500_fg_probe,
 	.remove = ab8500_fg_remove,
 	.driver = {
@@ -3222,20 +3223,6 @@ static struct platform_driver ab8500_fg_driver = {
 		.pm = &ab8500_fg_pm_ops,
 	},
 };
-
-static int __init ab8500_fg_init(void)
-{
-	return platform_driver_register(&ab8500_fg_driver);
-}
-
-static void __exit ab8500_fg_exit(void)
-{
-	platform_driver_unregister(&ab8500_fg_driver);
-}
-
-subsys_initcall_sync(ab8500_fg_init);
-module_exit(ab8500_fg_exit);
-
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
 MODULE_ALIAS("platform:ab8500-fg");

drivers/power/supply/abx500_chargalg.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/device.h>
+#include <linux/component.h>
 #include <linux/hrtimer.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
@@ -1943,13 +1944,44 @@ static int __maybe_unused abx500_chargalg_suspend(struct device *dev)
 	return 0;
 }
 
-static int abx500_chargalg_remove(struct platform_device *pdev)
+static char *supply_interface[] = {
+	"ab8500_fg",
+};
+
+static const struct power_supply_desc abx500_chargalg_desc = {
+	.name			= "abx500_chargalg",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= abx500_chargalg_props,
+	.num_properties		= ARRAY_SIZE(abx500_chargalg_props),
+	.get_property		= abx500_chargalg_get_property,
+	.external_power_changed	= abx500_chargalg_external_power_changed,
+};
+
+static int abx500_chargalg_bind(struct device *dev, struct device *master,
+				void *data)
 {
-	struct abx500_chargalg *di = platform_get_drvdata(pdev);
+	struct abx500_chargalg *di = dev_get_drvdata(dev);
 
-	/* sysfs interface to enable/disbale charging from user space */
-	abx500_chargalg_sysfs_exit(di);
+	/* Create a work queue for the chargalg */
+	di->chargalg_wq = alloc_ordered_workqueue("abx500_chargalg_wq",
+						  WQ_MEM_RECLAIM);
+	if (di->chargalg_wq == NULL) {
+		dev_err(di->dev, "failed to create work queue\n");
+		return -ENOMEM;
+	}
+
+	/* Run the charging algorithm */
+	queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
 
+	return 0;
+}
+
+static void abx500_chargalg_unbind(struct device *dev, struct device *master,
+				   void *data)
+{
+	struct abx500_chargalg *di = dev_get_drvdata(dev);
+
+	/* Stop all timers and work */
 	hrtimer_cancel(&di->safety_timer);
 	hrtimer_cancel(&di->maintenance_timer);
 
@@ -1959,48 +1991,29 @@ static int abx500_chargalg_remove(struct platform_device *pdev)
 
 	/* Delete the work queue */
 	destroy_workqueue(di->chargalg_wq);
-
-	power_supply_unregister(di->chargalg_psy);
-
-	return 0;
+	flush_scheduled_work();
 }
 
-static char *supply_interface[] = {
-	"ab8500_fg",
-};
-
-static const struct power_supply_desc abx500_chargalg_desc = {
-	.name			= "abx500_chargalg",
-	.type			= POWER_SUPPLY_TYPE_BATTERY,
-	.properties		= abx500_chargalg_props,
-	.num_properties		= ARRAY_SIZE(abx500_chargalg_props),
-	.get_property		= abx500_chargalg_get_property,
-	.external_power_changed	= abx500_chargalg_external_power_changed,
+static const struct component_ops abx500_chargalg_component_ops = {
+	.bind = abx500_chargalg_bind,
+	.unbind = abx500_chargalg_unbind,
 };
 
 static int abx500_chargalg_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
 	struct power_supply_config psy_cfg = {};
 	struct abx500_chargalg *di;
 	int ret = 0;
 
-	di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
-	if (!di) {
-		dev_err(&pdev->dev, "%s no mem for ab8500_chargalg\n", __func__);
+	di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
+	if (!di)
 		return -ENOMEM;
-	}
 
 	di->bm = &ab8500_bm_data;
 
-	ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to get battery information\n");
-		return ret;
-	}
-
 	/* get device struct and parent */
-	di->dev = &pdev->dev;
+	di->dev = dev;
 	di->parent = dev_get_drvdata(pdev->dev.parent);
 
 	psy_cfg.supplied_to = supply_interface;
@@ -2016,14 +2029,6 @@ static int abx500_chargalg_probe(struct platform_device *pdev)
 	di->maintenance_timer.function =
 		abx500_chargalg_maintenance_timer_expired;
 
-	/* Create a work queue for the chargalg */
-	di->chargalg_wq = alloc_ordered_workqueue("abx500_chargalg_wq",
-						   WQ_MEM_RECLAIM);
-	if (di->chargalg_wq == NULL) {
-		dev_err(di->dev, "failed to create work queue\n");
-		return -ENOMEM;
-	}
-
 	/* Init work for chargalg */
 	INIT_DEFERRABLE_WORK(&di->chargalg_periodic_work,
 		abx500_chargalg_periodic_work);
@@ -2037,12 +2042,12 @@ static int abx500_chargalg_probe(struct platform_device *pdev)
 	di->chg_info.prev_conn_chg = -1;
 
 	/* Register chargalg power supply class */
-	di->chargalg_psy = power_supply_register(di->dev, &abx500_chargalg_desc,
+	di->chargalg_psy = devm_power_supply_register(di->dev,
+						 &abx500_chargalg_desc,
 						 &psy_cfg);
 	if (IS_ERR(di->chargalg_psy)) {
 		dev_err(di->dev, "failed to register chargalg psy\n");
-		ret = PTR_ERR(di->chargalg_psy);
-		goto free_chargalg_wq;
+		return PTR_ERR(di->chargalg_psy);
 	}
 
 	platform_set_drvdata(pdev, di);
@@ -2051,21 +2056,24 @@ static int abx500_chargalg_probe(struct platform_device *pdev)
 	ret = abx500_chargalg_sysfs_init(di);
 	if (ret) {
 		dev_err(di->dev, "failed to create sysfs entry\n");
-		goto free_psy;
+		return ret;
 	}
 	di->curr_status.curr_step = CHARGALG_CURR_STEP_HIGH;
 
-	/* Run the charging algorithm */
-	queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
-
 	dev_info(di->dev, "probe success\n");
-	return ret;
+	return component_add(dev, &abx500_chargalg_component_ops);
+}
 
-free_psy:
-	power_supply_unregister(di->chargalg_psy);
-free_chargalg_wq:
-	destroy_workqueue(di->chargalg_wq);
-	return ret;
+static int abx500_chargalg_remove(struct platform_device *pdev)
+{
+	struct abx500_chargalg *di = platform_get_drvdata(pdev);
+
+	component_del(&pdev->dev, &abx500_chargalg_component_ops);
+
+	/* sysfs interface to enable/disable charging from user space */
+	abx500_chargalg_sysfs_exit(di);
+
+	return 0;
 }
 
 static SIMPLE_DEV_PM_OPS(abx500_chargalg_pm_ops, abx500_chargalg_suspend, abx500_chargalg_resume);
@@ -2075,7 +2083,7 @@ static const struct of_device_id ab8500_chargalg_match[] = {
 	{ },
 };
 
-static struct platform_driver abx500_chargalg_driver = {
+struct platform_driver abx500_chargalg_driver = {
 	.probe = abx500_chargalg_probe,
 	.remove = abx500_chargalg_remove,
 	.driver = {
@@ -2084,9 +2092,6 @@ static struct platform_driver abx500_chargalg_driver = {
 		.pm = &abx500_chargalg_pm_ops,
 	},
 };
-
-module_platform_driver(abx500_chargalg_driver);
-
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
 MODULE_ALIAS("platform:abx500-chargalg");

drivers/power/supply/axp20x_battery.c

@@ -40,6 +40,7 @@
 #define AXP209_FG_PERCENT		GENMASK(6, 0)
 #define AXP22X_FG_VALID			BIT(7)
 
+#define AXP20X_CHRG_CTRL1_ENABLE	BIT(7)
 #define AXP20X_CHRG_CTRL1_TGT_VOLT	GENMASK(6, 5)
 #define AXP20X_CHRG_CTRL1_TGT_4_1V	(0 << 5)
 #define AXP20X_CHRG_CTRL1_TGT_4_15V	(1 << 5)
@@ -468,7 +469,18 @@ static int axp20x_battery_set_prop(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
 		return axp20x_set_max_constant_charge_current(axp20x_batt,
 							      val->intval);
-
+	case POWER_SUPPLY_PROP_STATUS:
+		switch (val->intval) {
+		case POWER_SUPPLY_STATUS_CHARGING:
+			return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
+				AXP20X_CHRG_CTRL1_ENABLE, AXP20X_CHRG_CTRL1_ENABLE);
+
+		case POWER_SUPPLY_STATUS_DISCHARGING:
+		case POWER_SUPPLY_STATUS_NOT_CHARGING:
+			return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
+				AXP20X_CHRG_CTRL1_ENABLE, 0);
+		}
+		fallthrough;
 	default:
 		return -EINVAL;
 	}
@@ -491,7 +503,8 @@ static enum power_supply_property axp20x_battery_props[] = {
 static int axp20x_battery_prop_writeable(struct power_supply *psy,
 					 enum power_supply_property psp)
 {
-	return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN ||
+	return psp == POWER_SUPPLY_PROP_STATUS ||
+	       psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN ||
 	       psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN ||
 	       psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT ||
 	       psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX;

drivers/power/supply/axp288_fuel_gauge.c

@@ -142,9 +142,7 @@ static int fuel_gauge_reg_readb(struct axp288_fg_info *info, int reg)
 
 	for (i = 0; i < NR_RETRY_CNT; i++) {
 		ret = regmap_read(info->regmap, reg, &val);
-		if (ret == -EBUSY)
-			continue;
-		else
+		if (ret != -EBUSY)
 			break;
 	}
 
@@ -676,7 +674,7 @@ static void fuel_gauge_init_irq(struct axp288_fg_info *info)
  * detection reports one despite it not being there.
  * Please keep this listed sorted alphabetically.
  */
-static const struct dmi_system_id axp288_fuel_gauge_blacklist[] = {
+static const struct dmi_system_id axp288_no_battery_list[] = {
 	{
 		/* ACEPC T8 Cherry Trail Z8350 mini PC */
 		.matches = {
@@ -723,15 +721,6 @@ static const struct dmi_system_id axp288_fuel_gauge_blacklist[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "MEEGOPAD T02"),
 		},
 	},
-	{
-		/* Meegopad T08 */
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Default string"),
-			DMI_MATCH(DMI_BOARD_VENDOR, "To be filled by OEM."),
-			DMI_MATCH(DMI_BOARD_NAME, "T3 MRD"),
-			DMI_MATCH(DMI_BOARD_VERSION, "V1.1"),
-		},
-	},
 	{	/* Mele PCG03 Mini PC */
 		.matches = {
 			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Mini PC"),
@@ -745,6 +734,15 @@ static const struct dmi_system_id axp288_fuel_gauge_blacklist[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
 		}
 	},
+	{
+		/* Various Ace PC/Meegopad/MinisForum/Wintel Mini-PCs/HDMI-sticks */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "T3 MRD"),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "3"),
+			DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+			DMI_MATCH(DMI_BIOS_VERSION, "5.11"),
+		},
+	},
 	{}
 };
 
@@ -764,7 +762,7 @@ static int axp288_fuel_gauge_probe(struct platform_device *pdev)
 	};
 	unsigned int val;
 
-	if (dmi_check_system(axp288_fuel_gauge_blacklist))
+	if (dmi_check_system(axp288_no_battery_list))
 		return -ENODEV;
 
 	/*

drivers/power/supply/bq24190_charger.c

@@ -5,11 +5,10 @@
  * Author: Mark A. Greer <mgreer@animalcreek.com>
  */
 
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
-#include <linux/of_irq.h>
-#include <linux/of_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/power_supply.h>
 #include <linux/power/bq24190_charger.h>
@@ -1959,7 +1958,6 @@ static const struct i2c_device_id bq24190_i2c_ids[] = {
 };
 MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
 
-#ifdef CONFIG_OF
 static const struct of_device_id bq24190_of_match[] = {
 	{ .compatible = "ti,bq24190", },
 	{ .compatible = "ti,bq24192", },
@@ -1968,11 +1966,6 @@ static const struct of_device_id bq24190_of_match[] = {
 	{ },
 };
 MODULE_DEVICE_TABLE(of, bq24190_of_match);
-#else
-static const struct of_device_id bq24190_of_match[] = {
-	{ },
-};
-#endif
 
 static struct i2c_driver bq24190_driver = {
 	.probe		= bq24190_probe,
@@ -1981,7 +1974,7 @@ static struct i2c_driver bq24190_driver = {
 	.driver = {
 		.name		= "bq24190-charger",
 		.pm		= &bq24190_pm_ops,
-		.of_match_table	= of_match_ptr(bq24190_of_match),
+		.of_match_table	= bq24190_of_match,
 	},
 };
 module_i2c_driver(bq24190_driver);

drivers/power/supply/charger-manager.c

@@ -1279,6 +1279,7 @@ static const struct of_device_id charger_manager_match[] = {
 	},
 	{},
 };
+MODULE_DEVICE_TABLE(of, charger_manager_match);
 
 static struct charger_desc *of_cm_parse_desc(struct device *dev)
 {

drivers/power/supply/cpcap-battery.c

@@ -667,10 +667,23 @@ static int cpcap_battery_get_property(struct power_supply *psy,
 		if (!empty->voltage)
 			return -ENODATA;
 		val->intval = empty->counter_uah - latest->counter_uah;
-		if (val->intval < 0)
+		if (val->intval < 0) {
+			/* Assume invalid config if CHARGE_NOW is -20% */
+			if (ddata->charge_full && abs(val->intval) > ddata->charge_full/5) {
+				empty->voltage = 0;
+				ddata->charge_full = 0;
+				return -ENODATA;
+			}
 			val->intval = 0;
-		else if (ddata->charge_full && ddata->charge_full < val->intval)
+		} else if (ddata->charge_full && ddata->charge_full < val->intval) {
+			/* Assume invalid config if CHARGE_NOW exceeds CHARGE_FULL by 20% */
+			if (val->intval > (6*ddata->charge_full)/5) {
+				empty->voltage = 0;
+				ddata->charge_full = 0;
+				return -ENODATA;
+			}
 			val->intval = ddata->charge_full;
+		}
 		break;
 	case POWER_SUPPLY_PROP_CHARGE_FULL:
 		if (!ddata->charge_full)
@@ -747,7 +760,7 @@ static int cpcap_battery_set_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_CHARGE_FULL:
 		if (val->intval < 0)
 			return -EINVAL;
-		if (val->intval > ddata->config.info.charge_full_design)
+		if (val->intval > (6*ddata->config.info.charge_full_design)/5)
 			return -EINVAL;
 
 		ddata->charge_full = val->intval;

drivers/power/supply/cpcap-charger.c

@@ -173,23 +173,6 @@ static enum power_supply_property cpcap_charger_props[] = {
 	POWER_SUPPLY_PROP_CURRENT_NOW,
 };
 
-/* No battery always shows temperature of -40000 */
-static bool cpcap_charger_battery_found(struct cpcap_charger_ddata *ddata)
-{
-	struct iio_channel *channel;
-	int error, temperature;
-
-	channel = ddata->channels[CPCAP_CHARGER_IIO_BATTDET];
-	error = iio_read_channel_processed(channel, &temperature);
-	if (error < 0) {
-		dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
-
-		return false;
-	}
-
-	return temperature > -20000 && temperature < 60000;
-}
-
 static int cpcap_charger_get_charge_voltage(struct cpcap_charger_ddata *ddata)
 {
 	struct iio_channel *channel;
@@ -700,11 +683,29 @@ static void cpcap_usb_detect(struct work_struct *work)
 
 	if (!ddata->feeding_vbus && cpcap_charger_vbus_valid(ddata) &&
 	    s.chrgcurr1) {
-		int max_current = 532000;
+		int max_current;
 		int vchrg, ichrg;
+		union power_supply_propval val;
+		struct power_supply *battery;
 
-		if (cpcap_charger_battery_found(ddata))
+		battery = power_supply_get_by_name("battery");
+		if (IS_ERR_OR_NULL(battery)) {
+			dev_err(ddata->dev, "battery power_supply not available %li\n",
+					PTR_ERR(battery));
+			return;
+		}
+
+		error = power_supply_get_property(battery, POWER_SUPPLY_PROP_PRESENT, &val);
+		power_supply_put(battery);
+		if (error)
+			goto out_err;
+
+		if (val.intval) {
 			max_current = 1596000;
+		} else {
+			dev_info(ddata->dev, "battery not inserted, charging disabled\n");
+			max_current = 0;
+		}
 
 		if (max_current > ddata->limit_current)
 			max_current = ddata->limit_current;

drivers/power/supply/max17040_battery.c

@@ -16,7 +16,6 @@
 #include <linux/interrupt.h>
 #include <linux/power_supply.h>
 #include <linux/of_device.h>
-#include <linux/max17040_battery.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
@@ -142,13 +141,10 @@ struct max17040_chip {
 	struct regmap			*regmap;
 	struct delayed_work		work;
 	struct power_supply		*battery;
-	struct max17040_platform_data	*pdata;
 	struct chip_data		data;
 
 	/* battery capacity */
 	int soc;
-	/* State Of Charge */
-	int status;
 	/* Low alert threshold from 32% to 1% of the State of Charge */
 	u32 low_soc_alert;
 	/* some devices return twice the capacity */
@@ -221,26 +217,7 @@ static int max17040_get_version(struct max17040_chip *chip)
 
 static int max17040_get_online(struct max17040_chip *chip)
 {
-	return chip->pdata && chip->pdata->battery_online ?
-		chip->pdata->battery_online() : 1;
-}
-
-static int max17040_get_status(struct max17040_chip *chip)
-{
-	if (!chip->pdata || !chip->pdata->charger_online
-			|| !chip->pdata->charger_enable)
-		return POWER_SUPPLY_STATUS_UNKNOWN;
-
-	if (max17040_get_soc(chip) > MAX17040_BATTERY_FULL)
-		return POWER_SUPPLY_STATUS_FULL;
-
-	if (chip->pdata->charger_online())
-		if (chip->pdata->charger_enable())
-			return POWER_SUPPLY_STATUS_CHARGING;
-		else
-			return POWER_SUPPLY_STATUS_NOT_CHARGING;
-	else
-		return POWER_SUPPLY_STATUS_DISCHARGING;
+	return 1;
 }
 
 static int max17040_get_of_data(struct max17040_chip *chip)
@@ -283,7 +260,6 @@ static int max17040_get_of_data(struct max17040_chip *chip)
 static void max17040_check_changes(struct max17040_chip *chip)
 {
 	chip->soc = max17040_get_soc(chip);
-	chip->status = max17040_get_status(chip);
 }
 
 static void max17040_queue_work(struct max17040_chip *chip)
@@ -302,17 +278,16 @@ static void max17040_stop_work(void *data)
 static void max17040_work(struct work_struct *work)
 {
 	struct max17040_chip *chip;
-	int last_soc, last_status;
+	int last_soc;
 
 	chip = container_of(work, struct max17040_chip, work.work);
 
-	/* store SOC and status to check changes */
+	/* store SOC to check changes */
 	last_soc = chip->soc;
-	last_status = chip->status;
 	max17040_check_changes(chip);
 
 	/* check changes and send uevent */
-	if (last_soc != chip->soc || last_status != chip->status)
+	if (last_soc != chip->soc)
 		power_supply_changed(chip->battery);
 
 	max17040_queue_work(chip);
@@ -361,12 +336,10 @@ static irqreturn_t max17040_thread_handler(int id, void *dev)
 static int max17040_enable_alert_irq(struct max17040_chip *chip)
 {
 	struct i2c_client *client = chip->client;
-	unsigned int flags;
 	int ret;
 
-	flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
 	ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
-					max17040_thread_handler, flags,
+					max17040_thread_handler, IRQF_ONESHOT,
 					chip->battery->desc->name, chip);
 
 	return ret;
@@ -415,9 +388,6 @@ static int max17040_get_property(struct power_supply *psy,
 	struct max17040_chip *chip = power_supply_get_drvdata(psy);
 
 	switch (psp) {
-	case POWER_SUPPLY_PROP_STATUS:
-		val->intval = max17040_get_status(chip);
-		break;
 	case POWER_SUPPLY_PROP_ONLINE:
 		val->intval = max17040_get_online(chip);
 		break;
@@ -444,7 +414,6 @@ static const struct regmap_config max17040_regmap = {
 };
 
 static enum power_supply_property max17040_battery_props[] = {
-	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_ONLINE,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CAPACITY,
@@ -480,7 +449,6 @@ static int max17040_probe(struct i2c_client *client,
 
 	chip->client = client;
 	chip->regmap = devm_regmap_init_i2c(client, &max17040_regmap);
-	chip->pdata = client->dev.platform_data;
 	chip_id = (enum chip_id) id->driver_data;
 	if (client->dev.of_node) {
 		ret = max17040_get_of_data(chip);

drivers/power/supply/max17042_battery.c

@@ -1104,7 +1104,7 @@ static int max17042_probe(struct i2c_client *client,
 	}
 
 	if (client->irq) {
-		unsigned int flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
+		unsigned int flags = IRQF_ONESHOT;
 
 		/*
 		 * On ACPI systems the IRQ may be handled by ACPI-event code,

drivers/power/supply/rn5t618_power.c

@@ -37,8 +37,27 @@
 #define CHG_STATE_NO_BAT2	13
 #define CHG_STATE_CHG_READY_VUSB	14
 
+#define GCHGDET_TYPE_MASK 0x30
+#define GCHGDET_TYPE_SDP 0x00
+#define GCHGDET_TYPE_CDP 0x10
+#define GCHGDET_TYPE_DCP 0x20
+
 #define FG_ENABLE 1
 
+/*
+ * Formula seems accurate for battery current, but for USB current around 70mA
+ * per step was seen on Kobo Clara HD but all sources show the same formula
+ * also fur USB current. To avoid accidentially unwanted high currents we stick
+ * to that formula
+ */
+#define TO_CUR_REG(x) ((x) / 100000 - 1)
+#define FROM_CUR_REG(x) ((((x) & 0x1f) + 1) * 100000)
+#define CHG_MIN_CUR 100000
+#define CHG_MAX_CUR 1800000
+#define ADP_MAX_CUR 2500000
+#define USB_MAX_CUR 1400000
+
+
 struct rn5t618_power_info {
 	struct rn5t618 *rn5t618;
 	struct platform_device *pdev;
@@ -48,12 +67,24 @@ struct rn5t618_power_info {
 	int irq;
 };
 
+static enum power_supply_usb_type rn5t618_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_SDP,
+	POWER_SUPPLY_USB_TYPE_DCP,
+	POWER_SUPPLY_USB_TYPE_CDP,
+	POWER_SUPPLY_USB_TYPE_UNKNOWN
+};
+
 static enum power_supply_property rn5t618_usb_props[] = {
+	/* input current limit is not very accurate */
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
 	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_USB_TYPE,
 	POWER_SUPPLY_PROP_ONLINE,
 };
 
 static enum power_supply_property rn5t618_adp_props[] = {
+	/* input current limit is not very accurate */
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_ONLINE,
 };
@@ -69,6 +100,7 @@ static enum power_supply_property rn5t618_battery_props[] = {
 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
 	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 };
@@ -258,6 +290,36 @@ static int rn5t618_battery_ttf(struct rn5t618_power_info *info,
 	return 0;
 }
 
+static int rn5t618_battery_set_current_limit(struct rn5t618_power_info *info,
+				const union power_supply_propval *val)
+{
+	if (val->intval < CHG_MIN_CUR)
+		return -EINVAL;
+
+	if (val->intval >= CHG_MAX_CUR)
+		return -EINVAL;
+
+	return regmap_update_bits(info->rn5t618->regmap,
+				  RN5T618_CHGISET,
+				  0x1F, TO_CUR_REG(val->intval));
+}
+
+static int rn5t618_battery_get_current_limit(struct rn5t618_power_info *info,
+					     union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGISET,
+			  &regval);
+	if (ret < 0)
+		return ret;
+
+	val->intval = FROM_CUR_REG(regval);
+
+	return 0;
+}
+
 static int rn5t618_battery_charge_full(struct rn5t618_power_info *info,
 				       union power_supply_propval *val)
 {
@@ -323,6 +385,9 @@ static int rn5t618_battery_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
 		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
 		break;
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		ret = rn5t618_battery_get_current_limit(info, val);
+		break;
 	case POWER_SUPPLY_PROP_CHARGE_FULL:
 		ret = rn5t618_battery_charge_full(info, val);
 		break;
@@ -336,12 +401,38 @@ static int rn5t618_battery_get_property(struct power_supply *psy,
 	return ret;
 }
 
+static int rn5t618_battery_set_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					const union power_supply_propval *val)
+{
+	struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		return rn5t618_battery_set_current_limit(info, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int rn5t618_battery_property_is_writeable(struct power_supply *psy,
+						enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		return true;
+	default:
+		return false;
+	}
+}
+
 static int rn5t618_adp_get_property(struct power_supply *psy,
 				    enum power_supply_property psp,
 				    union power_supply_propval *val)
 {
 	struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
 	unsigned int chgstate;
+	unsigned int regval;
 	bool online;
 	int ret;
 
@@ -364,6 +455,14 @@ static int rn5t618_adp_get_property(struct power_supply *psy,
 		if (val->intval != POWER_SUPPLY_STATUS_CHARGING)
 			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = regmap_read(info->rn5t618->regmap,
+				  RN5T618_REGISET1, &regval);
+		if (ret < 0)
+			return ret;
+
+		val->intval = FROM_CUR_REG(regval);
 		break;
 	default:
 		return -EINVAL;
@@ -372,12 +471,79 @@ static int rn5t618_adp_get_property(struct power_supply *psy,
 	return 0;
 }
 
+static int rn5t618_adp_set_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    const union power_supply_propval *val)
+{
+	struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		if (val->intval > ADP_MAX_CUR)
+			return -EINVAL;
+
+		if (val->intval < CHG_MIN_CUR)
+			return -EINVAL;
+
+		ret = regmap_write(info->rn5t618->regmap, RN5T618_REGISET1,
+				   TO_CUR_REG(val->intval));
+		if (ret < 0)
+			return ret;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rn5t618_adp_property_is_writeable(struct power_supply *psy,
+					     enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int rc5t619_usb_get_type(struct rn5t618_power_info *info,
+				union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_GCHGDET, &regval);
+	if (ret < 0)
+		return ret;
+
+	switch (regval & GCHGDET_TYPE_MASK) {
+	case GCHGDET_TYPE_SDP:
+		val->intval = POWER_SUPPLY_USB_TYPE_SDP;
+		break;
+	case GCHGDET_TYPE_CDP:
+		val->intval = POWER_SUPPLY_USB_TYPE_CDP;
+		break;
+	case GCHGDET_TYPE_DCP:
+		val->intval = POWER_SUPPLY_USB_TYPE_DCP;
+		break;
+	default:
+		val->intval = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+	}
+
+	return 0;
+}
+
 static int rn5t618_usb_get_property(struct power_supply *psy,
 				    enum power_supply_property psp,
 				    union power_supply_propval *val)
 {
 	struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
 	unsigned int chgstate;
+	unsigned int regval;
 	bool online;
 	int ret;
 
@@ -400,6 +566,28 @@ static int rn5t618_usb_get_property(struct power_supply *psy,
 		if (val->intval != POWER_SUPPLY_STATUS_CHARGING)
 			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 
+		break;
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		if (!online || (info->rn5t618->variant != RC5T619))
+			return -ENODATA;
+
+		return rc5t619_usb_get_type(info, val);
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGCTL1,
+				  &regval);
+		if (ret < 0)
+			return ret;
+
+		val->intval = 0;
+		if (regval & 2) {
+			ret = regmap_read(info->rn5t618->regmap,
+					  RN5T618_REGISET2,
+					  &regval);
+			if (ret < 0)
+				return ret;
+
+			val->intval = FROM_CUR_REG(regval);
+		}
 		break;
 	default:
 		return -EINVAL;
@@ -408,12 +596,53 @@ static int rn5t618_usb_get_property(struct power_supply *psy,
 	return 0;
 }
 
+static int rn5t618_usb_set_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    const union power_supply_propval *val)
+{
+	struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		if (val->intval > USB_MAX_CUR)
+			return -EINVAL;
+
+		if (val->intval < CHG_MIN_CUR)
+			return -EINVAL;
+
+		ret = regmap_write(info->rn5t618->regmap, RN5T618_REGISET2,
+				   0xE0 | TO_CUR_REG(val->intval));
+		if (ret < 0)
+			return ret;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rn5t618_usb_property_is_writeable(struct power_supply *psy,
+					     enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return true;
+	default:
+		return false;
+	}
+}
+
 static const struct power_supply_desc rn5t618_battery_desc = {
 	.name                   = "rn5t618-battery",
 	.type                   = POWER_SUPPLY_TYPE_BATTERY,
 	.properties             = rn5t618_battery_props,
 	.num_properties         = ARRAY_SIZE(rn5t618_battery_props),
 	.get_property           = rn5t618_battery_get_property,
+	.set_property           = rn5t618_battery_set_property,
+	.property_is_writeable  = rn5t618_battery_property_is_writeable,
 };
 
 static const struct power_supply_desc rn5t618_adp_desc = {
@@ -422,14 +651,20 @@ static const struct power_supply_desc rn5t618_adp_desc = {
 	.properties             = rn5t618_adp_props,
 	.num_properties         = ARRAY_SIZE(rn5t618_adp_props),
 	.get_property           = rn5t618_adp_get_property,
+	.set_property           = rn5t618_adp_set_property,
+	.property_is_writeable  = rn5t618_adp_property_is_writeable,
 };
 
 static const struct power_supply_desc rn5t618_usb_desc = {
 	.name                   = "rn5t618-usb",
 	.type                   = POWER_SUPPLY_TYPE_USB,
+	.usb_types		= rn5t618_usb_types,
+	.num_usb_types		= ARRAY_SIZE(rn5t618_usb_types),
 	.properties             = rn5t618_usb_props,
 	.num_properties         = ARRAY_SIZE(rn5t618_usb_props),
 	.get_property           = rn5t618_usb_get_property,
+	.set_property           = rn5t618_usb_set_property,
+	.property_is_writeable  = rn5t618_usb_property_is_writeable,
 };
 
 static irqreturn_t rn5t618_charger_irq(int irq, void *data)

drivers/power/supply/rt5033_battery.c

@@ -164,9 +164,16 @@ static const struct i2c_device_id rt5033_battery_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, rt5033_battery_id);
 
+static const struct of_device_id rt5033_battery_of_match[] = {
+	{ .compatible = "richtek,rt5033-battery", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rt5033_battery_of_match);
+
 static struct i2c_driver rt5033_battery_driver = {
 	.driver = {
 		.name = "rt5033-battery",
+		.of_match_table = rt5033_battery_of_match,
 	},
 	.probe = rt5033_battery_probe,
 	.remove = rt5033_battery_remove,

drivers/power/supply/sbs-battery.c

@@ -189,6 +189,14 @@ static const enum power_supply_property sbs_properties[] = {
 /* Supports special manufacturer commands from TI BQ20Z65 and BQ20Z75 IC. */
 #define SBS_FLAGS_TI_BQ20ZX5		BIT(0)
 
+static const enum power_supply_property string_properties[] = {
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+};
+
+#define NR_STRING_BUFFERS	ARRAY_SIZE(string_properties)
+
 struct sbs_info {
 	struct i2c_client		*client;
 	struct power_supply		*power_supply;
@@ -202,11 +210,32 @@ struct sbs_info {
 	struct delayed_work		work;
 	struct mutex			mode_lock;
 	u32				flags;
+	int				technology;
+	char				strings[NR_STRING_BUFFERS][I2C_SMBUS_BLOCK_MAX + 1];
 };
 
-static char model_name[I2C_SMBUS_BLOCK_MAX + 1];
-static char manufacturer[I2C_SMBUS_BLOCK_MAX + 1];
-static char chemistry[I2C_SMBUS_BLOCK_MAX + 1];
+static char *sbs_get_string_buf(struct sbs_info *chip,
+				enum power_supply_property psp)
+{
+	int i = 0;
+
+	for (i = 0; i < NR_STRING_BUFFERS; i++)
+		if (string_properties[i] == psp)
+			return chip->strings[i];
+
+	return ERR_PTR(-EINVAL);
+}
+
+static void sbs_invalidate_cached_props(struct sbs_info *chip)
+{
+	int i = 0;
+
+	chip->technology = -1;
+
+	for (i = 0; i < NR_STRING_BUFFERS; i++)
+		chip->strings[i][0] = 0;
+}
+
 static bool force_load;
 
 static int sbs_read_word_data(struct i2c_client *client, u8 address);
@@ -244,6 +273,7 @@ static int sbs_update_presence(struct sbs_info *chip, bool is_present)
 		chip->is_present = false;
 		/* Disable PEC when no device is present */
 		client->flags &= ~I2C_CLIENT_PEC;
+		sbs_invalidate_cached_props(chip);
 		return 0;
 	}
 
@@ -640,17 +670,45 @@ static int sbs_get_battery_property(struct i2c_client *client,
 	return 0;
 }
 
-static int sbs_get_battery_string_property(struct i2c_client *client,
-	int reg_offset, enum power_supply_property psp, char *val)
+static int sbs_get_property_index(struct i2c_client *client,
+	enum power_supply_property psp)
 {
-	s32 ret;
+	int count;
 
-	ret = sbs_read_string_data(client, sbs_data[reg_offset].addr, val);
+	for (count = 0; count < ARRAY_SIZE(sbs_data); count++)
+		if (psp == sbs_data[count].psp)
+			return count;
 
-	if (ret < 0)
-		return ret;
+	dev_warn(&client->dev,
+		"%s: Invalid Property - %d\n", __func__, psp);
 
-	return 0;
+	return -EINVAL;
+}
+
+static const char *sbs_get_constant_string(struct sbs_info *chip,
+			enum power_supply_property psp)
+{
+	int ret;
+	char *buf;
+	u8 addr;
+
+	buf = sbs_get_string_buf(chip, psp);
+	if (IS_ERR(buf))
+		return buf;
+
+	if (!buf[0]) {
+		ret = sbs_get_property_index(chip->client, psp);
+		if (ret < 0)
+			return ERR_PTR(ret);
+
+		addr = sbs_data[ret].addr;
+
+		ret = sbs_read_string_data(chip->client, addr, buf);
+		if (ret < 0)
+			return ERR_PTR(ret);
+	}
+
+	return buf;
 }
 
 static void  sbs_unit_adjustment(struct i2c_client *client,
@@ -773,48 +831,36 @@ static int sbs_get_battery_serial_number(struct i2c_client *client,
 	return 0;
 }
 
-static int sbs_get_property_index(struct i2c_client *client,
-	enum power_supply_property psp)
-{
-	int count;
-	for (count = 0; count < ARRAY_SIZE(sbs_data); count++)
-		if (psp == sbs_data[count].psp)
-			return count;
-
-	dev_warn(&client->dev,
-		"%s: Invalid Property - %d\n", __func__, psp);
-
-	return -EINVAL;
-}
-
-static int sbs_get_chemistry(struct i2c_client *client,
+static int sbs_get_chemistry(struct sbs_info *chip,
 		union power_supply_propval *val)
 {
-	enum power_supply_property psp = POWER_SUPPLY_PROP_TECHNOLOGY;
-	int ret;
+	const char *chemistry;
 
-	ret = sbs_get_property_index(client, psp);
-	if (ret < 0)
-		return ret;
+	if (chip->technology != -1) {
+		val->intval = chip->technology;
+		return 0;
+	}
 
-	ret = sbs_get_battery_string_property(client, ret, psp,
-					      chemistry);
-	if (ret < 0)
-		return ret;
+	chemistry = sbs_get_constant_string(chip, POWER_SUPPLY_PROP_TECHNOLOGY);
+
+	if (IS_ERR(chemistry))
+		return PTR_ERR(chemistry);
 
 	if (!strncasecmp(chemistry, "LION", 4))
-		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		chip->technology = POWER_SUPPLY_TECHNOLOGY_LION;
 	else if (!strncasecmp(chemistry, "LiP", 3))
-		val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO;
+		chip->technology = POWER_SUPPLY_TECHNOLOGY_LIPO;
 	else if (!strncasecmp(chemistry, "NiCd", 4))
-		val->intval = POWER_SUPPLY_TECHNOLOGY_NiCd;
+		chip->technology = POWER_SUPPLY_TECHNOLOGY_NiCd;
 	else if (!strncasecmp(chemistry, "NiMH", 4))
-		val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
+		chip->technology = POWER_SUPPLY_TECHNOLOGY_NiMH;
 	else
-		val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+		chip->technology = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+
+	if (chip->technology == POWER_SUPPLY_TECHNOLOGY_UNKNOWN)
+		dev_warn(&chip->client->dev, "Unknown chemistry: %s\n", chemistry);
 
-	if (val->intval == POWER_SUPPLY_TECHNOLOGY_UNKNOWN)
-		dev_warn(&client->dev, "Unknown chemistry: %s\n", chemistry);
+	val->intval = chip->technology;
 
 	return 0;
 }
@@ -858,6 +904,7 @@ static int sbs_get_property(struct power_supply *psy,
 	int ret = 0;
 	struct sbs_info *chip = power_supply_get_drvdata(psy);
 	struct i2c_client *client = chip->client;
+	const char *str;
 
 	if (chip->gpio_detect) {
 		ret = gpiod_get_value_cansleep(chip->gpio_detect);
@@ -883,7 +930,7 @@ static int sbs_get_property(struct power_supply *psy,
 		break;
 
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
-		ret = sbs_get_chemistry(client, val);
+		ret = sbs_get_chemistry(chip, val);
 		if (ret < 0)
 			break;
 
@@ -935,23 +982,12 @@ static int sbs_get_property(struct power_supply *psy,
 		break;
 
 	case POWER_SUPPLY_PROP_MODEL_NAME:
-		ret = sbs_get_property_index(client, psp);
-		if (ret < 0)
-			break;
-
-		ret = sbs_get_battery_string_property(client, ret, psp,
-						      model_name);
-		val->strval = model_name;
-		break;
-
 	case POWER_SUPPLY_PROP_MANUFACTURER:
-		ret = sbs_get_property_index(client, psp);
-		if (ret < 0)
-			break;
-
-		ret = sbs_get_battery_string_property(client, ret, psp,
-						      manufacturer);
-		val->strval = manufacturer;
+		str = sbs_get_constant_string(chip, psp);
+		if (IS_ERR(str))
+			ret = PTR_ERR(str);
+		else
+			val->strval = str;
 		break;
 
 	case POWER_SUPPLY_PROP_MANUFACTURE_YEAR:
@@ -1098,6 +1134,7 @@ static int sbs_probe(struct i2c_client *client)
 	psy_cfg.of_node = client->dev.of_node;
 	psy_cfg.drv_data = chip;
 	chip->last_state = POWER_SUPPLY_STATUS_UNKNOWN;
+	sbs_invalidate_cached_props(chip);
 	mutex_init(&chip->mode_lock);
 
 	/* use pdata if available, fall back to DT properties,

drivers/power/supply/sc2731_charger.c

@@ -524,6 +524,7 @@ static const struct of_device_id sc2731_charger_of_match[] = {
 	{ .compatible = "sprd,sc2731-charger", },
 	{ }
 };
+MODULE_DEVICE_TABLE(of, sc2731_charger_of_match);
 
 static struct platform_driver sc2731_charger_driver = {
 	.driver = {

drivers/power/supply/sc27xx_fuel_gauge.c

@@ -1342,6 +1342,7 @@ static const struct of_device_id sc27xx_fgu_of_match[] = {
 	{ .compatible = "sprd,sc2731-fgu", },
 	{ }
 };
+MODULE_DEVICE_TABLE(of, sc27xx_fgu_of_match);
 
 static struct platform_driver sc27xx_fgu_driver = {
 	.probe = sc27xx_fgu_probe,

drivers/power/supply/smb347-charger.c

@@ -10,7 +10,6 @@
 
 #include <linux/delay.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>

drivers/power/supply/surface_battery.c

@@ -345,6 +345,16 @@ static u32 spwr_notify_bat(struct ssam_event_notifier *nf, const struct ssam_eve
 	struct spwr_battery_device *bat = container_of(nf, struct spwr_battery_device, notif);
 	int status;
 
+	/*
+	 * We cannot use strict matching when registering the notifier as the
+	 * EC expects us to register it against instance ID 0. Strict matching
+	 * would thus drop events, as those may have non-zero instance IDs in
+	 * this subsystem. So we need to check the instance ID of the event
+	 * here manually.
+	 */
+	if (event->instance_id != bat->sdev->uid.instance)
+		return 0;
+
 	dev_dbg(&bat->sdev->dev, "power event (cid = %#04x, iid = %#04x, tid = %#04x)\n",
 		event->command_id, event->instance_id, event->target_id);
 
@@ -720,8 +730,8 @@ static void spwr_battery_init(struct spwr_battery_device *bat, struct ssam_devic
 	bat->notif.base.fn = spwr_notify_bat;
 	bat->notif.event.reg = registry;
 	bat->notif.event.id.target_category = sdev->uid.category;
-	bat->notif.event.id.instance = 0;
-	bat->notif.event.mask = SSAM_EVENT_MASK_STRICT;
+	bat->notif.event.id.instance = 0;	/* need to register with instance 0 */
+	bat->notif.event.mask = SSAM_EVENT_MASK_TARGET;
 	bat->notif.event.flags = SSAM_EVENT_SEQUENCED;
 
 	bat->psy_desc.name = bat->name;

drivers/power/supply/surface_charger.c

@@ -66,7 +66,7 @@ struct spwr_ac_device {
 
 static int spwr_ac_update_unlocked(struct spwr_ac_device *ac)
 {
-	u32 old = ac->state;
+	__le32 old = ac->state;
 	int status;
 
 	lockdep_assert_held(&ac->lock);

include/linux/max17040_battery.h

-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Copyright (C) 2009 Samsung Electronics
- *  Minkyu Kang <mk7.kang@samsung.com>
- */
-
-#ifndef __MAX17040_BATTERY_H_
-#define __MAX17040_BATTERY_H_
-
-struct max17040_platform_data {
-	int (*battery_online)(void);
-	int (*charger_online)(void);
-	int (*charger_enable)(void);
-};
-
-#endif

include/linux/pm2301_charger.h

-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * PM2301 charger driver.
- *
- * Copyright (C) 2012 ST Ericsson Corporation
- *
- * Contact: Olivier LAUNAY (olivier.launay@stericsson.com
- */
-
-#ifndef __LINUX_PM2301_H
-#define __LINUX_PM2301_H
-
-/**
- * struct pm2xxx_bm_charger_parameters - Charger specific parameters
- * @ac_volt_max:	maximum allowed AC charger voltage in mV
- * @ac_curr_max:	maximum allowed AC charger current in mA
- */
-struct pm2xxx_bm_charger_parameters {
-	int ac_volt_max;
-	int ac_curr_max;
-};
-
-/**
- * struct pm2xxx_bm_data - pm2xxx battery management data
- * @enable_overshoot    flag to enable VBAT overshoot control
- * @chg_params	  charger parameters
- */
-struct pm2xxx_bm_data {
-	bool enable_overshoot;
-	const struct pm2xxx_bm_charger_parameters *chg_params;
-};
-
-struct pm2xxx_charger_platform_data {
-	char **supplied_to;
-	size_t num_supplicants;
-	int i2c_bus;
-	const char *label;
-	int gpio_irq_number;
-	unsigned int lpn_gpio;
-	int irq_type;
-};
-
-struct pm2xxx_platform_data {
-	struct pm2xxx_charger_platform_data *wall_charger;
-	struct pm2xxx_bm_data *battery;
-};
-
-#endif /* __LINUX_PM2301_H */

include/linux/power/ab8500.h

-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) ST-Ericsson 2013
- * Author: Hongbo Zhang <hongbo.zhang@linaro.com>
- */
-
-#ifndef PWR_AB8500_H
-#define PWR_AB8500_H
-
-extern const struct abx500_res_to_temp ab8500_temp_tbl_a_thermistor[];
-extern const int ab8500_temp_tbl_a_size;
-
-extern const struct abx500_res_to_temp ab8500_temp_tbl_b_thermistor[];
-extern const int ab8500_temp_tbl_b_size;
-
-#endif /* PWR_AB8500_H */