Commit c767a54b authored by Joe Perches's avatar Joe Perches Committed by Ingo Molnar

x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level>

Use a more current logging style:

 - Bare printks should have a KERN_<LEVEL> for consistency's sake
 - Add pr_fmt where appropriate
 - Neaten some macro definitions
 - Convert some Ok output to OK
 - Use "%s: ", __func__ in pr_fmt for summit
 - Convert some printks to pr_<level>

Message output is not identical in all cases.
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Cc: levinsasha928@gmail.com
Link: http://lkml.kernel.org/r/1337655007.24226.10.camel@joe2Laptop
[ merged two similar patches, tidied up the changelog ]
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
parent f9ba7179
......@@ -99,7 +99,7 @@ static irqreturn_t floppy_hardint(int irq, void *dev_id)
virtual_dma_residue += virtual_dma_count;
virtual_dma_count = 0;
#ifdef TRACE_FLPY_INT
printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
printk(KERN_DEBUG "count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
virtual_dma_count, virtual_dma_residue, calls, bytes,
dma_wait);
calls = 0;
......
......@@ -7,9 +7,13 @@
#undef DEBUG
#ifdef DEBUG
#define DBG(x...) printk(x)
#define DBG(fmt, ...) printk(fmt, ##__VA_ARGS__)
#else
#define DBG(x...)
#define DBG(fmt, ...) \
do { \
if (0) \
printk(fmt, ##__VA_ARGS__); \
} while (0)
#endif
#define PCI_PROBE_BIOS 0x0001
......
......@@ -2,9 +2,9 @@
#define _ASM_X86_PGTABLE_2LEVEL_H
#define pte_ERROR(e) \
printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte_low)
pr_err("%s:%d: bad pte %08lx\n", __FILE__, __LINE__, (e).pte_low)
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
pr_err("%s:%d: bad pgd %08lx\n", __FILE__, __LINE__, pgd_val(e))
/*
* Certain architectures need to do special things when PTEs
......
......@@ -9,13 +9,13 @@
*/
#define pte_ERROR(e) \
printk("%s:%d: bad pte %p(%08lx%08lx).\n", \
pr_err("%s:%d: bad pte %p(%08lx%08lx)\n", \
__FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
#define pmd_ERROR(e) \
printk("%s:%d: bad pmd %p(%016Lx).\n", \
pr_err("%s:%d: bad pmd %p(%016Lx)\n", \
__FILE__, __LINE__, &(e), pmd_val(e))
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %p(%016Lx).\n", \
pr_err("%s:%d: bad pgd %p(%016Lx)\n", \
__FILE__, __LINE__, &(e), pgd_val(e))
/* Rules for using set_pte: the pte being assigned *must* be
......
......@@ -26,16 +26,16 @@ extern pgd_t init_level4_pgt[];
extern void paging_init(void);
#define pte_ERROR(e) \
printk("%s:%d: bad pte %p(%016lx).\n", \
pr_err("%s:%d: bad pte %p(%016lx)\n", \
__FILE__, __LINE__, &(e), pte_val(e))
#define pmd_ERROR(e) \
printk("%s:%d: bad pmd %p(%016lx).\n", \
pr_err("%s:%d: bad pmd %p(%016lx)\n", \
__FILE__, __LINE__, &(e), pmd_val(e))
#define pud_ERROR(e) \
printk("%s:%d: bad pud %p(%016lx).\n", \
pr_err("%s:%d: bad pud %p(%016lx)\n", \
__FILE__, __LINE__, &(e), pud_val(e))
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %p(%016lx).\n", \
pr_err("%s:%d: bad pgd %p(%016lx)\n", \
__FILE__, __LINE__, &(e), pgd_val(e))
struct mm_struct;
......
#define pr_fmt(fmt) "SMP alternatives: " fmt
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/mutex.h>
......@@ -63,8 +65,11 @@ static int __init setup_noreplace_paravirt(char *str)
__setup("noreplace-paravirt", setup_noreplace_paravirt);
#endif
#define DPRINTK(fmt, args...) if (debug_alternative) \
printk(KERN_DEBUG fmt, args)
#define DPRINTK(fmt, ...) \
do { \
if (debug_alternative) \
printk(KERN_DEBUG fmt, ##__VA_ARGS__); \
} while (0)
/*
* Each GENERIC_NOPX is of X bytes, and defined as an array of bytes
......@@ -428,7 +433,7 @@ void alternatives_smp_switch(int smp)
* If this still occurs then you should see a hang
* or crash shortly after this line:
*/
printk("lockdep: fixing up alternatives.\n");
pr_info("lockdep: fixing up alternatives\n");
#endif
if (noreplace_smp || smp_alt_once || skip_smp_alternatives)
......@@ -444,14 +449,14 @@ void alternatives_smp_switch(int smp)
if (smp == smp_mode) {
/* nothing */
} else if (smp) {
printk(KERN_INFO "SMP alternatives: switching to SMP code\n");
pr_info("switching to SMP code\n");
clear_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
clear_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
list_for_each_entry(mod, &smp_alt_modules, next)
alternatives_smp_lock(mod->locks, mod->locks_end,
mod->text, mod->text_end);
} else {
printk(KERN_INFO "SMP alternatives: switching to UP code\n");
pr_info("switching to UP code\n");
set_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
set_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
list_for_each_entry(mod, &smp_alt_modules, next)
......@@ -546,7 +551,7 @@ void __init alternative_instructions(void)
#ifdef CONFIG_SMP
if (smp_alt_once) {
if (1 == num_possible_cpus()) {
printk(KERN_INFO "SMP alternatives: switching to UP code\n");
pr_info("switching to UP code\n");
set_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
set_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
......
......@@ -2,6 +2,9 @@
* Shared support code for AMD K8 northbridges and derivates.
* Copyright 2006 Andi Kleen, SUSE Labs. Subject to GPLv2.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/init.h>
......@@ -258,7 +261,7 @@ void amd_flush_garts(void)
}
spin_unlock_irqrestore(&gart_lock, flags);
if (!flushed)
printk("nothing to flush?\n");
pr_notice("nothing to flush?\n");
}
EXPORT_SYMBOL_GPL(amd_flush_garts);
......@@ -269,11 +272,10 @@ static __init int init_amd_nbs(void)
err = amd_cache_northbridges();
if (err < 0)
printk(KERN_NOTICE "AMD NB: Cannot enumerate AMD northbridges.\n");
pr_notice("Cannot enumerate AMD northbridges\n");
if (amd_cache_gart() < 0)
printk(KERN_NOTICE "AMD NB: Cannot initialize GART flush words, "
"GART support disabled.\n");
pr_notice("Cannot initialize GART flush words, GART support disabled\n");
return err;
}
......
......@@ -448,8 +448,8 @@ static int __add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pi
entry = alloc_irq_pin_list(node);
if (!entry) {
printk(KERN_ERR "can not alloc irq_pin_list (%d,%d,%d)\n",
node, apic, pin);
pr_err("can not alloc irq_pin_list (%d,%d,%d)\n",
node, apic, pin);
return -ENOMEM;
}
entry->apic = apic;
......@@ -661,7 +661,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
ioapic_mask_entry(apic, pin);
entry = ioapic_read_entry(apic, pin);
if (entry.irr)
printk(KERN_ERR "Unable to reset IRR for apic: %d, pin :%d\n",
pr_err("Unable to reset IRR for apic: %d, pin :%d\n",
mpc_ioapic_id(apic), pin);
}
......@@ -895,7 +895,7 @@ static int irq_polarity(int idx)
}
case 2: /* reserved */
{
printk(KERN_WARNING "broken BIOS!!\n");
pr_warn("broken BIOS!!\n");
polarity = 1;
break;
}
......@@ -906,7 +906,7 @@ static int irq_polarity(int idx)
}
default: /* invalid */
{
printk(KERN_WARNING "broken BIOS!!\n");
pr_warn("broken BIOS!!\n");
polarity = 1;
break;
}
......@@ -948,7 +948,7 @@ static int irq_trigger(int idx)
}
default:
{
printk(KERN_WARNING "broken BIOS!!\n");
pr_warn("broken BIOS!!\n");
trigger = 1;
break;
}
......@@ -962,7 +962,7 @@ static int irq_trigger(int idx)
}
case 2: /* reserved */
{
printk(KERN_WARNING "broken BIOS!!\n");
pr_warn("broken BIOS!!\n");
trigger = 1;
break;
}
......@@ -973,7 +973,7 @@ static int irq_trigger(int idx)
}
default: /* invalid */
{
printk(KERN_WARNING "broken BIOS!!\n");
pr_warn("broken BIOS!!\n");
trigger = 0;
break;
}
......@@ -991,7 +991,7 @@ static int pin_2_irq(int idx, int apic, int pin)
* Debugging check, we are in big trouble if this message pops up!
*/
if (mp_irqs[idx].dstirq != pin)
printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
pr_err("broken BIOS or MPTABLE parser, ayiee!!\n");
if (test_bit(bus, mp_bus_not_pci)) {
irq = mp_irqs[idx].srcbusirq;
......@@ -1521,7 +1521,6 @@ __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
reg_03.raw = io_apic_read(ioapic_idx, 3);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
printk("\n");
printk(KERN_DEBUG "IO APIC #%d......\n", mpc_ioapic_id(ioapic_idx));
printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID);
......@@ -1578,7 +1577,7 @@ __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
i,
ir_entry->index
);
printk("%1d %1d %1d %1d %1d "
pr_cont("%1d %1d %1d %1d %1d "
"%1d %1d %X %02X\n",
ir_entry->format,
ir_entry->mask,
......@@ -1598,7 +1597,7 @@ __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
i,
entry.dest
);
printk("%1d %1d %1d %1d %1d "
pr_cont("%1d %1d %1d %1d %1d "
"%1d %1d %02X\n",
entry.mask,
entry.trigger,
......@@ -1651,8 +1650,8 @@ __apicdebuginit(void) print_IO_APICs(void)
continue;
printk(KERN_DEBUG "IRQ%d ", irq);
for_each_irq_pin(entry, cfg->irq_2_pin)
printk("-> %d:%d", entry->apic, entry->pin);
printk("\n");
pr_cont("-> %d:%d", entry->apic, entry->pin);
pr_cont("\n");
}
printk(KERN_INFO ".................................... done.\n");
......@@ -1665,9 +1664,9 @@ __apicdebuginit(void) print_APIC_field(int base)
printk(KERN_DEBUG);
for (i = 0; i < 8; i++)
printk(KERN_CONT "%08x", apic_read(base + i*0x10));
pr_cont("%08x", apic_read(base + i*0x10));
printk(KERN_CONT "\n");
pr_cont("\n");
}
__apicdebuginit(void) print_local_APIC(void *dummy)
......@@ -1769,7 +1768,7 @@ __apicdebuginit(void) print_local_APIC(void *dummy)
printk(KERN_DEBUG "... APIC EILVT%d: %08x\n", i, v);
}
}
printk("\n");
pr_cont("\n");
}
__apicdebuginit(void) print_local_APICs(int maxcpu)
......@@ -2065,7 +2064,7 @@ void __init setup_ioapic_ids_from_mpc_nocheck(void)
reg_00.raw = io_apic_read(ioapic_idx, 0);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx))
printk("could not set ID!\n");
pr_cont("could not set ID!\n");
else
apic_printk(APIC_VERBOSE, " ok.\n");
}
......@@ -3563,7 +3562,8 @@ static int __init io_apic_get_unique_id(int ioapic, int apic_id)
/* Sanity check */
if (reg_00.bits.ID != apic_id) {
printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
pr_err("IOAPIC[%d]: Unable to change apic_id!\n",
ioapic);
return -1;
}
}
......
......@@ -26,6 +26,8 @@
*
*/
#define pr_fmt(fmt) "summit: %s: " fmt, __func__
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/io.h>
......@@ -235,8 +237,8 @@ static int summit_apic_id_registered(void)
static void summit_setup_apic_routing(void)
{
printk("Enabling APIC mode: Summit. Using %d I/O APICs\n",
nr_ioapics);
pr_info("Enabling APIC mode: Summit. Using %d I/O APICs\n",
nr_ioapics);
}
static int summit_cpu_present_to_apicid(int mps_cpu)
......@@ -275,7 +277,7 @@ static unsigned int summit_cpu_mask_to_apicid(const struct cpumask *cpumask)
int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
printk("%s: Not a valid mask!\n", __func__);
pr_err("Not a valid mask!\n");
return BAD_APICID;
}
apicid |= new_apicid;
......@@ -355,7 +357,7 @@ static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
}
}
if (i == rio_table_hdr->num_rio_dev) {
printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __func__);
pr_err("Couldn't find owner Cyclone for Winnipeg!\n");
return last_bus;
}
......@@ -366,7 +368,7 @@ static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
}
}
if (i == rio_table_hdr->num_scal_dev) {
printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __func__);
pr_err("Couldn't find owner Twister for Cyclone!\n");
return last_bus;
}
......@@ -396,7 +398,7 @@ static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
num_buses = 9;
break;
default:
printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __func__);
pr_info("Unsupported Winnipeg type!\n");
return last_bus;
}
......@@ -411,13 +413,15 @@ static int build_detail_arrays(void)
int i, scal_detail_size, rio_detail_size;
if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) {
printk(KERN_WARNING "%s: MAX_NUMNODES too low! Defined as %d, but system has %d nodes.\n", __func__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
pr_warn("MAX_NUMNODES too low! Defined as %d, but system has %d nodes\n",
MAX_NUMNODES, rio_table_hdr->num_scal_dev);
return 0;
}
switch (rio_table_hdr->version) {
default:
printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __func__, rio_table_hdr->version);
pr_warn("Invalid Rio Grande Table Version: %d\n",
rio_table_hdr->version);
return 0;
case 2:
scal_detail_size = 11;
......@@ -462,7 +466,7 @@ void setup_summit(void)
offset = *((unsigned short *)(ptr + offset));
}
if (!rio_table_hdr) {
printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __func__);
pr_err("Unable to locate Rio Grande Table in EBDA - bailing!\n");
return;
}
......
......@@ -201,6 +201,8 @@
* http://www.microsoft.com/whdc/archive/amp_12.mspx]
*/
#define pr_fmt(fmt) "apm: " fmt
#include <linux/module.h>
#include <linux/poll.h>
......@@ -485,11 +487,11 @@ static void apm_error(char *str, int err)
if (error_table[i].key == err)
break;
if (i < ERROR_COUNT)
printk(KERN_NOTICE "apm: %s: %s\n", str, error_table[i].msg);
pr_notice("%s: %s\n", str, error_table[i].msg);
else if (err < 0)
printk(KERN_NOTICE "apm: %s: linux error code %i\n", str, err);
pr_notice("%s: linux error code %i\n", str, err);
else
printk(KERN_NOTICE "apm: %s: unknown error code %#2.2x\n",
pr_notice("%s: unknown error code %#2.2x\n",
str, err);
}
......@@ -1184,7 +1186,7 @@ static void queue_event(apm_event_t event, struct apm_user *sender)
static int notified;
if (notified++ == 0)
printk(KERN_ERR "apm: an event queue overflowed\n");
pr_err("an event queue overflowed\n");
if (++as->event_tail >= APM_MAX_EVENTS)
as->event_tail = 0;
}
......@@ -1447,7 +1449,7 @@ static void apm_mainloop(void)
static int check_apm_user(struct apm_user *as, const char *func)
{
if (as == NULL || as->magic != APM_BIOS_MAGIC) {
printk(KERN_ERR "apm: %s passed bad filp\n", func);
pr_err("%s passed bad filp\n", func);
return 1;
}
return 0;
......@@ -1586,7 +1588,7 @@ static int do_release(struct inode *inode, struct file *filp)
as1 = as1->next)
;
if (as1 == NULL)
printk(KERN_ERR "apm: filp not in user list\n");
pr_err("filp not in user list\n");
else
as1->next = as->next;
}
......@@ -1600,11 +1602,9 @@ static int do_open(struct inode *inode, struct file *filp)
struct apm_user *as;
as = kmalloc(sizeof(*as), GFP_KERNEL);
if (as == NULL) {
printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n",
sizeof(*as));
if (as == NULL)
return -ENOMEM;
}
as->magic = APM_BIOS_MAGIC;
as->event_tail = as->event_head = 0;
as->suspends_pending = as->standbys_pending = 0;
......@@ -2313,16 +2313,16 @@ static int __init apm_init(void)
}
if (apm_info.disabled) {
printk(KERN_NOTICE "apm: disabled on user request.\n");
pr_notice("disabled on user request.\n");
return -ENODEV;
}
if ((num_online_cpus() > 1) && !power_off && !smp) {
printk(KERN_NOTICE "apm: disabled - APM is not SMP safe.\n");
pr_notice("disabled - APM is not SMP safe.\n");
apm_info.disabled = 1;
return -ENODEV;
}
if (!acpi_disabled) {
printk(KERN_NOTICE "apm: overridden by ACPI.\n");
pr_notice("overridden by ACPI.\n");
apm_info.disabled = 1;
return -ENODEV;
}
......@@ -2356,8 +2356,7 @@ static int __init apm_init(void)
kapmd_task = kthread_create(apm, NULL, "kapmd");
if (IS_ERR(kapmd_task)) {
printk(KERN_ERR "apm: disabled - Unable to start kernel "
"thread.\n");
pr_err("disabled - Unable to start kernel thread\n");
err = PTR_ERR(kapmd_task);
kapmd_task = NULL;
remove_proc_entry("apm", NULL);
......
......@@ -55,8 +55,8 @@ static void __init check_fpu(void)
if (!boot_cpu_data.hard_math) {
#ifndef CONFIG_MATH_EMULATION
printk(KERN_EMERG "No coprocessor found and no math emulation present.\n");
printk(KERN_EMERG "Giving up.\n");
pr_emerg("No coprocessor found and no math emulation present\n");
pr_emerg("Giving up\n");
for (;;) ;
#endif
return;
......@@ -86,7 +86,7 @@ static void __init check_fpu(void)
boot_cpu_data.fdiv_bug = fdiv_bug;
if (boot_cpu_data.fdiv_bug)
printk(KERN_WARNING "Hmm, FPU with FDIV bug.\n");
pr_warn("Hmm, FPU with FDIV bug\n");
}
static void __init check_hlt(void)
......@@ -94,16 +94,16 @@ static void __init check_hlt(void)
if (boot_cpu_data.x86 >= 5 || paravirt_enabled())
return;
printk(KERN_INFO "Checking 'hlt' instruction... ");
pr_info("Checking 'hlt' instruction... ");
if (!boot_cpu_data.hlt_works_ok) {
printk("disabled\n");
pr_cont("disabled\n");
return;
}
halt();
halt();
halt();
halt();
printk(KERN_CONT "OK.\n");
pr_cont("OK\n");
}
/*
......@@ -116,7 +116,7 @@ static void __init check_popad(void)
#ifndef CONFIG_X86_POPAD_OK
int res, inp = (int) &res;
printk(KERN_INFO "Checking for popad bug... ");
pr_info("Checking for popad bug... ");
__asm__ __volatile__(
"movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx "
: "=&a" (res)
......@@ -127,9 +127,9 @@ static void __init check_popad(void)
* CPU hard. Too bad.
*/
if (res != 12345678)
printk(KERN_CONT "Buggy.\n");
pr_cont("Buggy\n");
else
printk(KERN_CONT "OK.\n");
pr_cont("OK\n");
#endif
}
......@@ -161,7 +161,7 @@ void __init check_bugs(void)
{
identify_boot_cpu();
#ifndef CONFIG_SMP
printk(KERN_INFO "CPU: ");
pr_info("CPU: ");
print_cpu_info(&boot_cpu_data);
#endif
check_config();
......
......@@ -7,6 +7,9 @@
* Copyright 2008 Intel Corporation
* Author: Andi Kleen
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/thread_info.h>
#include <linux/capability.h>
#include <linux/miscdevice.h>
......@@ -210,7 +213,7 @@ static void drain_mcelog_buffer(void)
cpu_relax();
if (!m->finished && retries >= 4) {
pr_err("MCE: skipping error being logged currently!\n");
pr_err("skipping error being logged currently!\n");
break;
}
}
......@@ -1167,8 +1170,9 @@ int memory_failure(unsigned long pfn, int vector, int flags)
{
/* mce_severity() should not hand us an ACTION_REQUIRED error */
BUG_ON(flags & MF_ACTION_REQUIRED);
printk(KERN_ERR "Uncorrected memory error in page 0x%lx ignored\n"
"Rebuild kernel with CONFIG_MEMORY_FAILURE=y for smarter handling\n", pfn);
pr_err("Uncorrected memory error in page 0x%lx ignored\n"
"Rebuild kernel with CONFIG_MEMORY_FAILURE=y for smarter handling\n",
pfn);
return 0;
}
......@@ -1358,11 +1362,10 @@ static int __cpuinit __mcheck_cpu_cap_init(void)
b = cap & MCG_BANKCNT_MASK;
if (!banks)
printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
pr_info("CPU supports %d MCE banks\n", b);
if (b > MAX_NR_BANKS) {
printk(KERN_WARNING
"MCE: Using only %u machine check banks out of %u\n",
pr_warn("Using only %u machine check banks out of %u\n",
MAX_NR_BANKS, b);
b = MAX_NR_BANKS;
}
......@@ -1419,7 +1422,7 @@ static void __mcheck_cpu_init_generic(void)
static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
{
if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
pr_info("MCE: unknown CPU type - not enabling MCE support.\n");
pr_info("unknown CPU type - not enabling MCE support\n");
return -EOPNOTSUPP;
}
......@@ -1574,7 +1577,7 @@ static void __mcheck_cpu_init_timer(void)
/* Handle unconfigured int18 (should never happen) */
static void unexpected_machine_check(struct pt_regs *regs, long error_code)
{
printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n",
pr_err("CPU#%d: Unexpected int18 (Machine Check)\n",
smp_processor_id());
}
......@@ -1893,8 +1896,7 @@ static int __init mcheck_enable(char *str)
get_option(&str, &monarch_timeout);
}
} else {
printk(KERN_INFO "mce argument %s ignored. Please use /sys\n",
str);
pr_info("mce argument %s ignored. Please use /sys\n", str);
return 0;
}
return 1;
......
......@@ -5,6 +5,8 @@
* among events on a single PMU.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/stddef.h>
#include <linux/types.h>
#include <linux/init.h>
......@@ -1000,7 +1002,7 @@ static void intel_pmu_reset(void)
local_irq_save(flags);
printk("clearing PMU state on CPU#%d\n", smp_processor_id());
pr_info("clearing PMU state on CPU#%d\n", smp_processor_id());
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
checking_wrmsrl(x86_pmu_config_addr(idx), 0ull);
......@@ -1638,14 +1640,14 @@ static __init void intel_clovertown_quirk(void)
* But taken together it might just make sense to not enable PEBS on
* these chips.
*/
printk(KERN_WARNING "PEBS disabled due to CPU errata.\n");
pr_warn("PEBS disabled due to CPU errata\n");
x86_pmu.pebs = 0;
x86_pmu.pebs_constraints = NULL;
}
static __init void intel_sandybridge_quirk(void)
{
printk(KERN_WARNING "PEBS disabled due to CPU errata.\n");
pr_warn("PEBS disabled due to CPU errata\n");
x86_pmu.pebs = 0;
x86_pmu.pebs_constraints = NULL;
}
......@@ -1667,8 +1669,8 @@ static __init void intel_arch_events_quirk(void)
/* disable event that reported as not presend by cpuid */
for_each_set_bit(bit, x86_pmu.events_mask, ARRAY_SIZE(intel_arch_events_map)) {
intel_perfmon_event_map[intel_arch_events_map[bit].id] = 0;
printk(KERN_WARNING "CPUID marked event: \'%s\' unavailable\n",
intel_arch_events_map[bit].name);
pr_warn("CPUID marked event: \'%s\' unavailable\n",
intel_arch_events_map[bit].name);
}
}
......@@ -1687,7 +1689,7 @@ static __init void intel_nehalem_quirk(void)
intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89;
ebx.split.no_branch_misses_retired = 0;
x86_pmu.events_maskl = ebx.full;
printk(KERN_INFO "CPU erratum AAJ80 worked around\n");
pr_info("CPU erratum AAJ80 worked around\n");
}
}
......
......@@ -27,8 +27,8 @@ static int die_counter;
void printk_address(unsigned long address, int reliable)
{
printk(" [<%p>] %s%pB\n", (void *) address,
reliable ? "" : "? ", (void *) address);
pr_cont(" [<%p>] %s%pB\n",
(void *)address, reliable ? "" : "? ", (void *)address);
}
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
......
......@@ -73,11 +73,11 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
if (kstack_end(stack))
break;
if (i && ((i % STACKSLOTS_PER_LINE) == 0))
printk(KERN_CONT "\n");
printk(KERN_CONT " %08lx", *stack++);
pr_cont("\n");
pr_cont(" %08lx", *stack++);
touch_nmi_watchdog();
}
printk(KERN_CONT "\n");
pr_cont("\n");
show_trace_log_lvl(task, regs, sp, bp, log_lvl);
}
......@@ -89,9 +89,9 @@ void show_regs(struct pt_regs *regs)
print_modules();
__show_regs(regs, !user_mode_vm(regs));
printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)\n",
TASK_COMM_LEN, current->comm, task_pid_nr(current),
current_thread_info(), current, task_thread_info(current));
pr_emerg("Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)\n",
TASK_COMM_LEN, current->comm, task_pid_nr(current),
current_thread_info(), current, task_thread_info(current));
/*
* When in-kernel, we also print out the stack and code at the
* time of the fault..
......@@ -102,10 +102,10 @@ void show_regs(struct pt_regs *regs)
unsigned char c;
u8 *ip;
printk(KERN_EMERG "Stack:\n");
pr_emerg("Stack:\n");
show_stack_log_lvl(NULL, regs, &regs->sp, 0, KERN_EMERG);
printk(KERN_EMERG "Code: ");
pr_emerg("Code:");
ip = (u8 *)regs->ip - code_prologue;
if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
......@@ -116,16 +116,16 @@ void show_regs(struct pt_regs *regs)
for (i = 0; i < code_len; i++, ip++) {
if (ip < (u8 *)PAGE_OFFSET ||
probe_kernel_address(ip, c)) {
printk(KERN_CONT " Bad EIP value.");
pr_cont(" Bad EIP value.");
break;
}
if (ip == (u8 *)regs->ip)
printk(KERN_CONT "<%02x> ", c);
pr_cont(" <%02x>", c);
else
printk(KERN_CONT "%02x ", c);
pr_cont(" %02x", c);
}
}
printk(KERN_CONT "\n");
pr_cont("\n");
}
int is_valid_bugaddr(unsigned long ip)
......
......@@ -228,20 +228,20 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
if (stack >= irq_stack && stack <= irq_stack_end) {
if (stack == irq_stack_end) {
stack = (unsigned long *) (irq_stack_end[-1]);
printk(KERN_CONT " <EOI> ");
pr_cont(" <EOI> ");
}
} else {
if (((long) stack & (THREAD_SIZE-1)) == 0)
break;
}
if (i && ((i % STACKSLOTS_PER_LINE) == 0))
printk(KERN_CONT "\n");
printk(KERN_CONT " %016lx", *stack++);
pr_cont("\n");
pr_cont(" %016lx", *stack++);
touch_nmi_watchdog();
}
preempt_enable();
printk(KERN_CONT "\n");
pr_cont("\n");
show_trace_log_lvl(task, regs, sp, bp, log_lvl);
}
......@@ -256,8 +256,8 @@ void show_regs(struct pt_regs *regs)
printk("CPU %d ", cpu);
print_modules();
__show_regs(regs, 1);
printk("Process %s (pid: %d, threadinfo %p, task %p)\n",
cur->comm, cur->pid, task_thread_info(cur), cur);
printk(KERN_DEFAULT "Process %s (pid: %d, threadinfo %p, task %p)\n",
cur->comm, cur->pid, task_thread_info(cur), cur);
/*
* When in-kernel, we also print out the stack and code at the
......@@ -284,16 +284,16 @@ void show_regs(struct pt_regs *regs)
for (i = 0; i < code_len; i++, ip++) {
if (ip < (u8 *)PAGE_OFFSET ||
probe_kernel_address(ip, c)) {
printk(KERN_CONT " Bad RIP value.");
pr_cont(" Bad RIP value.");
break;
}
if (ip == (u8 *)regs->ip)
printk(KERN_CONT "<%02x> ", c);
pr_cont("<%02x> ", c);
else
printk(KERN_CONT "%02x ", c);
pr_cont("%02x ", c);
}
}
printk(KERN_CONT "\n");
pr_cont("\n");
}
int is_valid_bugaddr(unsigned long ip)
......
......@@ -294,9 +294,9 @@ void fixup_irqs(void)
raw_spin_unlock(&desc->lock);
if (break_affinity && set_affinity)
printk("Broke affinity for irq %i\n", irq);
pr_notice("Broke affinity for irq %i\n", irq);
else if (!set_affinity)
printk("Cannot set affinity for irq %i\n", irq);
pr_notice("Cannot set affinity for irq %i\n", irq);
}
/*
......
......@@ -15,6 +15,9 @@
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/moduleloader.h>
#include <linux/elf.h>
#include <linux/vmalloc.h>
......@@ -30,9 +33,14 @@
#include <asm/pgtable.h>
#if 0
#define DEBUGP printk
#define DEBUGP(fmt, ...) \
printk(KERN_DEBUG fmt, ##__VA_ARGS__)
#else
#define DEBUGP(fmt...)
#define DEBUGP(fmt, ...) \
do { \
if (0) \
printk(KERN_DEBUG fmt, ##__VA_ARGS__); \
} while (0)
#endif
void *module_alloc(unsigned long size)
......@@ -56,8 +64,8 @@ int apply_relocate(Elf32_Shdr *sechdrs,
Elf32_Sym *sym;
uint32_t *location;
DEBUGP("Applying relocate section %u to %u\n", relsec,
sechdrs[relsec].sh_info);
DEBUGP("Applying relocate section %u to %u\n",
relsec, sechdrs[relsec].sh_info);
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
/* This is where to make the change */
location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
......@@ -77,7 +85,7 @@ int apply_relocate(Elf32_Shdr *sechdrs,
*location += sym->st_value - (uint32_t)location;
break;
default:
printk(KERN_ERR "module %s: Unknown relocation: %u\n",
pr_err("%s: Unknown relocation: %u\n",
me->name, ELF32_R_TYPE(rel[i].r_info));
return -ENOEXEC;
}
......@@ -97,8 +105,8 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
void *loc;
u64 val;
DEBUGP("Applying relocate section %u to %u\n", relsec,
sechdrs[relsec].sh_info);
DEBUGP("Applying relocate section %u to %u\n",
relsec, sechdrs[relsec].sh_info);
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
/* This is where to make the change */
loc = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
......@@ -110,8 +118,8 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
+ ELF64_R_SYM(rel[i].r_info);
DEBUGP("type %d st_value %Lx r_addend %Lx loc %Lx\n",
(int)ELF64_R_TYPE(rel[i].r_info),
sym->st_value, rel[i].r_addend, (u64)loc);
(int)ELF64_R_TYPE(rel[i].r_info),
sym->st_value, rel[i].r_addend, (u64)loc);
val = sym->st_value + rel[i].r_addend;
......@@ -140,7 +148,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
#endif
break;
default:
printk(KERN_ERR "module %s: Unknown rela relocation: %llu\n",
pr_err("%s: Unknown rela relocation: %llu\n",
me->name, ELF64_R_TYPE(rel[i].r_info));
return -ENOEXEC;
}
......@@ -148,9 +156,9 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
return 0;
overflow:
printk(KERN_ERR "overflow in relocation type %d val %Lx\n",
pr_err("overflow in relocation type %d val %Lx\n",
(int)ELF64_R_TYPE(rel[i].r_info), val);
printk(KERN_ERR "`%s' likely not compiled with -mcmodel=kernel\n",
pr_err("`%s' likely not compiled with -mcmodel=kernel\n",
me->name);
return -ENOEXEC;
}
......
......@@ -22,6 +22,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define pr_fmt(fmt) "Calgary: " fmt
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
......@@ -245,7 +247,7 @@ static unsigned long iommu_range_alloc(struct device *dev,
offset = iommu_area_alloc(tbl->it_map, tbl->it_size, 0,
npages, 0, boundary_size, 0);
if (offset == ~0UL) {
printk(KERN_WARNING "Calgary: IOMMU full.\n");
pr_warn("IOMMU full\n");
spin_unlock_irqrestore(&tbl->it_lock, flags);
if (panic_on_overflow)
panic("Calgary: fix the allocator.\n");
......@@ -271,8 +273,8 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
entry = iommu_range_alloc(dev, tbl, npages);
if (unlikely(entry == DMA_ERROR_CODE)) {
printk(KERN_WARNING "Calgary: failed to allocate %u pages in "
"iommu %p\n", npages, tbl);
pr_warn("failed to allocate %u pages in iommu %p\n",
npages, tbl);
return DMA_ERROR_CODE;
}
......@@ -561,8 +563,7 @@ static void calgary_tce_cache_blast(struct iommu_table *tbl)
i++;
} while ((val & 0xff) != 0xff && i < 100);
if (i == 100)
printk(KERN_WARNING "Calgary: PCI bus not quiesced, "
"continuing anyway\n");
pr_warn("PCI bus not quiesced, continuing anyway\n");
/* invalidate TCE cache */
target = calgary_reg(bbar, tar_offset(tbl->it_busno));
......@@ -604,8 +605,7 @@ static void calioc2_tce_cache_blast(struct iommu_table *tbl)
i++;
} while ((val64 & 0xff) != 0xff && i < 100);
if (i == 100)
printk(KERN_WARNING "CalIOC2: PCI bus not quiesced, "
"continuing anyway\n");
pr_warn("CalIOC2: PCI bus not quiesced, continuing anyway\n");
/* 3. poll Page Migration DEBUG for SoftStopFault */
target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_DEBUG);
......@@ -617,8 +617,7 @@ static void calioc2_tce_cache_blast(struct iommu_table *tbl)
if (++count < 100)
goto begin;
else {
printk(KERN_WARNING "CalIOC2: too many SoftStopFaults, "
"aborting TCE cache flush sequence!\n");
pr_warn("CalIOC2: too many SoftStopFaults, aborting TCE cache flush sequence!\n");
return; /* pray for the best */
}
}
......@@ -840,8 +839,8 @@ static void calgary_dump_error_regs(struct iommu_table *tbl)
plssr = be32_to_cpu(readl(target));
/* If no error, the agent ID in the CSR is not valid */
printk(KERN_EMERG "Calgary: DMA error on Calgary PHB 0x%x, "
"0x%08x@CSR 0x%08x@PLSSR\n", tbl->it_busno, csr, plssr);
pr_emerg("DMA error on Calgary PHB 0x%x, 0x%08x@CSR 0x%08x@PLSSR\n",
tbl->it_busno, csr, plssr);
}
static void calioc2_dump_error_regs(struct iommu_table *tbl)
......@@ -867,22 +866,21 @@ static void calioc2_dump_error_regs(struct iommu_table *tbl)
target = calgary_reg(bbar, phboff | 0x800);
mck = be32_to_cpu(readl(target));
printk(KERN_EMERG "Calgary: DMA error on CalIOC2 PHB 0x%x\n",
tbl->it_busno);
pr_emerg("DMA error on CalIOC2 PHB 0x%x\n", tbl->it_busno);
printk(KERN_EMERG "Calgary: 0x%08x@CSR 0x%08x@PLSSR 0x%08x@CSMR 0x%08x@MCK\n",
csr, plssr, csmr, mck);
pr_emerg("0x%08x@CSR 0x%08x@PLSSR 0x%08x@CSMR 0x%08x@MCK\n",
csr, plssr, csmr, mck);
/* dump rest of error regs */
printk(KERN_EMERG "Calgary: ");
pr_emerg("");
for (i = 0; i < ARRAY_SIZE(errregs); i++) {
/* err regs are at 0x810 - 0x870 */
erroff = (0x810 + (i * 0x10));
target = calgary_reg(bbar, phboff | erroff);
errregs[i] = be32_to_cpu(readl(target));
printk("0x%08x@0x%lx ", errregs[i], erroff);
pr_cont("0x%08x@0x%lx ", errregs[i], erroff);
}
printk("\n");
pr_cont("\n");
/* root complex status */
target = calgary_reg(bbar, phboff | PHB_ROOT_COMPLEX_STATUS);
......
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/mm.h>
......@@ -145,16 +147,14 @@ void show_regs_common(void)
/* Board Name is optional */
board = dmi_get_system_info(DMI_BOARD_NAME);
printk(KERN_CONT "\n");
printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s",
current->pid, current->comm, print_tainted(),
init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
init_utsname()->version);
printk(KERN_CONT " %s %s", vendor, product);
if (board)
printk(KERN_CONT "/%s", board);
printk(KERN_CONT "\n");
printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s %s%s%s\n",
current->pid, current->comm, print_tainted(),
init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
init_utsname()->version,
vendor, product,
board ? "/" : "",
board ? board : "");
}
void flush_thread(void)
......@@ -645,7 +645,7 @@ static void amd_e400_idle(void)
amd_e400_c1e_detected = true;
if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
mark_tsc_unstable("TSC halt in AMD C1E");
printk(KERN_INFO "System has AMD C1E enabled\n");
pr_info("System has AMD C1E enabled\n");
}
}
......@@ -659,8 +659,7 @@ static void amd_e400_idle(void)
*/
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
&cpu);
printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
cpu);
pr_info("Switch to broadcast mode on CPU%d\n", cpu);
}
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
......@@ -681,8 +680,7 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
if (pm_idle == poll_idle && smp_num_siblings > 1) {
printk_once(KERN_WARNING "WARNING: polling idle and HT enabled,"
" performance may degrade.\n");
pr_warn_once("WARNING: polling idle and HT enabled, performance may degrade\n");
}
#endif
if (pm_idle)
......@@ -692,11 +690,11 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
/*
* One CPU supports mwait => All CPUs supports mwait
*/
printk(KERN_INFO "using mwait in idle threads.\n");
pr_info("using mwait in idle threads\n");
pm_idle = mwait_idle;
} else if (cpu_has_amd_erratum(amd_erratum_400)) {
/* E400: APIC timer interrupt does not wake up CPU from C1e */
printk(KERN_INFO "using AMD E400 aware idle routine\n");
pr_info("using AMD E400 aware idle routine\n");
pm_idle = amd_e400_idle;
} else
pm_idle = default_idle;
......@@ -715,7 +713,7 @@ static int __init idle_setup(char *str)
return -EINVAL;
if (!strcmp(str, "poll")) {
printk("using polling idle threads.\n");
pr_info("using polling idle threads\n");
pm_idle = poll_idle;
boot_option_idle_override = IDLE_POLL;
} else if (!strcmp(str, "mwait")) {
......
......@@ -117,10 +117,10 @@ void release_thread(struct task_struct *dead_task)
{
if (dead_task->mm) {
if (dead_task->mm->context.size) {
printk("WARNING: dead process %8s still has LDT? <%p/%d>\n",
dead_task->comm,
dead_task->mm->context.ldt,
dead_task->mm->context.size);
pr_warn("WARNING: dead process %8s still has LDT? <%p/%d>\n",
dead_task->comm,
dead_task->mm->context.ldt,
dead_task->mm->context.size);
BUG();
}
}
......
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/reboot.h>
#include <linux/init.h>
......@@ -152,7 +154,8 @@ static int __init set_bios_reboot(const struct dmi_system_id *d)
{
if (reboot_type != BOOT_BIOS) {
reboot_type = BOOT_BIOS;
printk(KERN_INFO "%s series board detected. Selecting BIOS-method for reboots.\n", d->ident);
pr_info("%s series board detected. Selecting %s-method for reboots.\n",
"BIOS", d->ident);
}
return 0;
}
......@@ -207,8 +210,8 @@ static int __init set_pci_reboot(const struct dmi_system_id *d)
{
if (reboot_type != BOOT_CF9) {
reboot_type = BOOT_CF9;
printk(KERN_INFO "%s series board detected. "
"Selecting PCI-method for reboots.\n", d->ident);
pr_info("%s series board detected. Selecting %s-method for reboots.\n",
"PCI", d->ident);
}
return 0;
}
......@@ -217,7 +220,8 @@ static int __init set_kbd_reboot(const struct dmi_system_id *d)
{
if (reboot_type != BOOT_KBD) {
reboot_type = BOOT_KBD;
printk(KERN_INFO "%s series board detected. Selecting KBD-method for reboot.\n", d->ident);
pr_info("%s series board detected. Selecting %s-method for reboot.\n",
"KBD", d->ident);
}
return 0;
}
......@@ -668,7 +672,7 @@ static void __machine_emergency_restart(int emergency)
static void native_machine_restart(char *__unused)
{
printk("machine restart\n");
pr_notice("machine restart\n");
if (!reboot_force)
machine_shutdown();
......
......@@ -6,6 +6,9 @@
* 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes
* 2000-2002 x86-64 support by Andi Kleen
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
......@@ -814,7 +817,7 @@ void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
me->comm, me->pid, where, frame,
regs->ip, regs->sp, regs->orig_ax);
print_vma_addr(" in ", regs->ip);
printk(KERN_CONT "\n");
pr_cont("\n");
}
force_sig(SIGSEGV, me);
......
/*
/*
* x86 SMP booting functions
*
* (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
......@@ -39,6 +39,8 @@
* Glauber Costa : i386 and x86_64 integration
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/module.h>
......@@ -184,7 +186,7 @@ static void __cpuinit smp_callin(void)
* boards)
*/
pr_debug("CALLIN, before setup_local_APIC().\n");
pr_debug("CALLIN, before setup_local_APIC()\n");
if (apic->smp_callin_clear_local_apic)
apic->smp_callin_clear_local_apic();
setup_local_APIC();
......@@ -420,17 +422,16 @@ static void impress_friends(void)
/*
* Allow the user to impress friends.
*/
pr_debug("Before bogomips.\n");
pr_debug("Before bogomips\n");
for_each_possible_cpu(cpu)
if (cpumask_test_cpu(cpu, cpu_callout_mask))
bogosum += cpu_data(cpu).loops_per_jiffy;
printk(KERN_INFO
"Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
pr_info("Total of %d processors activated (%lu.%02lu BogoMIPS)\n",
num_online_cpus(),
bogosum/(500000/HZ),
(bogosum/(5000/HZ))%100);
pr_debug("Before bogocount - setting activated=1.\n");
pr_debug("Before bogocount - setting activated=1\n");
}
void __inquire_remote_apic(int apicid)
......@@ -440,18 +441,17 @@ void __inquire_remote_apic(int apicid)
int timeout;
u32 status;
printk(KERN_INFO "Inquiring remote APIC 0x%x...\n", apicid);
pr_info("Inquiring remote APIC 0x%x...\n", apicid);
for (i = 0; i < ARRAY_SIZE(regs); i++) {
printk(KERN_INFO "... APIC 0x%x %s: ", apicid, names[i]);
pr_info("... APIC 0x%x %s: ", apicid, names[i]);
/*
* Wait for idle.
*/
status = safe_apic_wait_icr_idle();
if (status)
printk(KERN_CONT
"a previous APIC delivery may have failed\n");
pr_cont("a previous APIC delivery may have failed\n");
apic_icr_write(APIC_DM_REMRD | regs[i], apicid);
......@@ -464,10 +464,10 @@ void __inquire_remote_apic(int apicid)
switch (status) {
case APIC_ICR_RR_VALID:
status = apic_read(APIC_RRR);
printk(KERN_CONT "%08x\n", status);
pr_cont("%08x\n", status);
break;
default:
printk(KERN_CONT "failed\n");
pr_cont("failed\n");
}
}
}
......@@ -501,12 +501,12 @@ wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip)
apic_write(APIC_ESR, 0);
accept_status = (apic_read(APIC_ESR) & 0xEF);
}
pr_debug("NMI sent.\n");
pr_debug("NMI sent\n");
if (send_status)
printk(KERN_ERR "APIC never delivered???\n");
pr_err("APIC never delivered???\n");
if (accept_status)
printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
pr_err("APIC delivery error (%lx)\n", accept_status);
return (send_status | accept_status);
}
......@@ -528,7 +528,7 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
apic_read(APIC_ESR);
}
pr_debug("Asserting INIT.\n");
pr_debug("Asserting INIT\n");
/*
* Turn INIT on target chip
......@@ -544,7 +544,7 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
mdelay(10);
pr_debug("Deasserting INIT.\n");
pr_debug("Deasserting INIT\n");
/* Target chip */
/* Send IPI */
......@@ -577,14 +577,14 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
/*
* Run STARTUP IPI loop.
*/
pr_debug("#startup loops: %d.\n", num_starts);
pr_debug("#startup loops: %d\n", num_starts);
for (j = 1; j <= num_starts; j++) {
pr_debug("Sending STARTUP #%d.\n", j);
pr_debug("Sending STARTUP #%d\n", j);
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
pr_debug("After apic_write.\n");
pr_debug("After apic_write\n");
/*
* STARTUP IPI
......@@ -601,7 +601,7 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
*/
udelay(300);
pr_debug("Startup point 1.\n");
pr_debug("Startup point 1\n");
pr_debug("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
......@@ -616,12 +616,12 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
if (send_status || accept_status)
break;
}
pr_debug("After Startup.\n");
pr_debug("After Startup\n");
if (send_status)
printk(KERN_ERR "APIC never delivered???\n");
pr_err("APIC never delivered???\n");
if (accept_status)
printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
pr_err("APIC delivery error (%lx)\n", accept_status);
return (send_status | accept_status);
}
......@@ -635,11 +635,11 @@ static void __cpuinit announce_cpu(int cpu, int apicid)
if (system_state == SYSTEM_BOOTING) {
if (node != current_node) {
if (current_node > (-1))
pr_cont(" Ok.\n");
pr_cont(" OK\n");
current_node = node;
pr_info("Booting Node %3d, Processors ", node);
}
pr_cont(" #%d%s", cpu, cpu == (nr_cpu_ids - 1) ? " Ok.\n" : "");
pr_cont(" #%d%s", cpu, cpu == (nr_cpu_ids - 1) ? " OK\n" : "");
return;
} else
pr_info("Booting Node %d Processor %d APIC 0x%x\n",
......@@ -719,9 +719,9 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu, struct task_struct *idle)
/*
* allow APs to start initializing.
*/
pr_debug("Before Callout %d.\n", cpu);
pr_debug("Before Callout %d\n", cpu);
cpumask_set_cpu(cpu, cpu_callout_mask);
pr_debug("After Callout %d.\n", cpu);
pr_debug("After Callout %d\n", cpu);
/*
* Wait 5s total for a response
......@@ -749,7 +749,7 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu, struct task_struct *idle)
pr_err("CPU%d: Stuck ??\n", cpu);
else
/* trampoline code not run */
pr_err("CPU%d: Not responding.\n", cpu);
pr_err("CPU%d: Not responding\n", cpu);
if (apic->inquire_remote_apic)
apic->inquire_remote_apic(apicid);
}
......@@ -794,7 +794,7 @@ int __cpuinit native_cpu_up(unsigned int cpu, struct task_struct *tidle)
if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
!physid_isset(apicid, phys_cpu_present_map) ||
!apic->apic_id_valid(apicid)) {
printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu);
pr_err("%s: bad cpu %d\n", __func__, cpu);
return -EINVAL;
}
......@@ -875,9 +875,8 @@ static int __init smp_sanity_check(unsigned max_cpus)
unsigned int cpu;
unsigned nr;
printk(KERN_WARNING
"More than 8 CPUs detected - skipping them.\n"
"Use CONFIG_X86_BIGSMP.\n");
pr_warn("More than 8 CPUs detected - skipping them\n"
"Use CONFIG_X86_BIGSMP\n");
nr = 0;
for_each_present_cpu(cpu) {
......@@ -898,8 +897,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
#endif
if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
printk(KERN_WARNING
"weird, boot CPU (#%d) not listed by the BIOS.\n",
pr_warn("weird, boot CPU (#%d) not listed by the BIOS\n",
hard_smp_processor_id());
physid_set(hard_smp_processor_id(), phys_cpu_present_map);
......@@ -911,11 +909,10 @@ static int __init smp_sanity_check(unsigned max_cpus)
*/
if (!smp_found_config && !acpi_lapic) {
preempt_enable();
printk(KERN_NOTICE "SMP motherboard not detected.\n");
pr_notice("SMP motherboard not detected\n");
disable_smp();
if (APIC_init_uniprocessor())
printk(KERN_NOTICE "Local APIC not detected."
" Using dummy APIC emulation.\n");
pr_notice("Local APIC not detected. Using dummy APIC emulation.\n");
return -1;
}
......@@ -924,9 +921,8 @@ static int __init smp_sanity_check(unsigned max_cpus)
* CPU too, but we do it for the sake of robustness anyway.
*/
if (!apic->check_phys_apicid_present(boot_cpu_physical_apicid)) {
printk(KERN_NOTICE
"weird, boot CPU (#%d) not listed by the BIOS.\n",
boot_cpu_physical_apicid);
pr_notice("weird, boot CPU (#%d) not listed by the BIOS\n",
boot_cpu_physical_apicid);
physid_set(hard_smp_processor_id(), phys_cpu_present_map);
}
preempt_enable();
......@@ -939,8 +935,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
if (!disable_apic) {
pr_err("BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_physical_apicid);
pr_err("... forcing use of dummy APIC emulation."
"(tell your hw vendor)\n");
pr_err("... forcing use of dummy APIC emulation (tell your hw vendor)\n");
}
smpboot_clear_io_apic();
disable_ioapic_support();
......@@ -953,7 +948,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
* If SMP should be disabled, then really disable it!
*/
if (!max_cpus) {
printk(KERN_INFO "SMP mode deactivated.\n");
pr_info("SMP mode deactivated\n");
smpboot_clear_io_apic();
connect_bsp_APIC();
......@@ -1005,7 +1000,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
if (smp_sanity_check(max_cpus) < 0) {
printk(KERN_INFO "SMP disabled\n");
pr_info("SMP disabled\n");
disable_smp();
goto out;
}
......@@ -1043,7 +1038,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
* Set up local APIC timer on boot CPU.
*/
printk(KERN_INFO "CPU%d: ", 0);
pr_info("CPU%d: ", 0);
print_cpu_info(&cpu_data(0));
x86_init.timers.setup_percpu_clockev();
......@@ -1093,7 +1088,7 @@ void __init native_smp_prepare_boot_cpu(void)
void __init native_smp_cpus_done(unsigned int max_cpus)
{
pr_debug("Boot done.\n");
pr_debug("Boot done\n");
nmi_selftest();
impress_friends();
......@@ -1154,8 +1149,7 @@ __init void prefill_possible_map(void)
/* nr_cpu_ids could be reduced via nr_cpus= */
if (possible > nr_cpu_ids) {
printk(KERN_WARNING
"%d Processors exceeds NR_CPUS limit of %d\n",
pr_warn("%d Processors exceeds NR_CPUS limit of %d\n",
possible, nr_cpu_ids);
possible = nr_cpu_ids;
}
......@@ -1164,13 +1158,12 @@ __init void prefill_possible_map(void)
if (!setup_max_cpus)
#endif
if (possible > i) {
printk(KERN_WARNING
"%d Processors exceeds max_cpus limit of %u\n",
pr_warn("%d Processors exceeds max_cpus limit of %u\n",
possible, setup_max_cpus);
possible = i;
}
printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
pr_info("Allowing %d CPUs, %d hotplug CPUs\n",
possible, max_t(int, possible - num_processors, 0));
for (i = 0; i < possible; i++)
......
......@@ -9,6 +9,9 @@
/*
* Handle hardware traps and faults.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/interrupt.h>
#include <linux/kallsyms.h>
#include <linux/spinlock.h>
......@@ -143,12 +146,11 @@ do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
#ifdef CONFIG_X86_64
if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
printk_ratelimit()) {
printk(KERN_INFO
"%s[%d] trap %s ip:%lx sp:%lx error:%lx",
tsk->comm, tsk->pid, str,
regs->ip, regs->sp, error_code);
pr_info("%s[%d] trap %s ip:%lx sp:%lx error:%lx",
tsk->comm, tsk->pid, str,
regs->ip, regs->sp, error_code);
print_vma_addr(" in ", regs->ip);
printk("\n");
pr_cont("\n");
}
#endif
......@@ -269,12 +271,11 @@ do_general_protection(struct pt_regs *regs, long error_code)
if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
printk_ratelimit()) {
printk(KERN_INFO
"%s[%d] general protection ip:%lx sp:%lx error:%lx",
pr_info("%s[%d] general protection ip:%lx sp:%lx error:%lx",
tsk->comm, task_pid_nr(tsk),
regs->ip, regs->sp, error_code);
print_vma_addr(" in ", regs->ip);
printk("\n");
pr_cont("\n");
}
force_sig(SIGSEGV, tsk);
......@@ -570,7 +571,7 @@ do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
conditional_sti(regs);
#if 0
/* No need to warn about this any longer. */
printk(KERN_INFO "Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
pr_info("Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
#endif
}
......
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
......@@ -84,8 +86,7 @@ EXPORT_SYMBOL_GPL(check_tsc_unstable);
#ifdef CONFIG_X86_TSC
int __init notsc_setup(char *str)
{
printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
"cannot disable TSC completely.\n");
pr_warn("Kernel compiled with CONFIG_X86_TSC, cannot disable TSC completely\n");
tsc_disabled = 1;
return 1;
}
......@@ -373,7 +374,7 @@ static unsigned long quick_pit_calibrate(void)
goto success;
}
}
printk("Fast TSC calibration failed\n");
pr_err("Fast TSC calibration failed\n");
return 0;
success:
......@@ -392,7 +393,7 @@ static unsigned long quick_pit_calibrate(void)
*/
delta *= PIT_TICK_RATE;
do_div(delta, i*256*1000);
printk("Fast TSC calibration using PIT\n");
pr_info("Fast TSC calibration using PIT\n");
return delta;
}
......@@ -487,9 +488,8 @@ unsigned long native_calibrate_tsc(void)
* use the reference value, as it is more precise.
*/
if (delta >= 90 && delta <= 110) {
printk(KERN_INFO
"TSC: PIT calibration matches %s. %d loops\n",
hpet ? "HPET" : "PMTIMER", i + 1);
pr_info("PIT calibration matches %s. %d loops\n",
hpet ? "HPET" : "PMTIMER", i + 1);
return tsc_ref_min;
}
......@@ -511,38 +511,36 @@ unsigned long native_calibrate_tsc(void)
*/
if (tsc_pit_min == ULONG_MAX) {
/* PIT gave no useful value */
printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n");
pr_warn("Unable to calibrate against PIT\n");
/* We don't have an alternative source, disable TSC */
if (!hpet && !ref1 && !ref2) {
printk("TSC: No reference (HPET/PMTIMER) available\n");
pr_notice("No reference (HPET/PMTIMER) available\n");
return 0;
}
/* The alternative source failed as well, disable TSC */
if (tsc_ref_min == ULONG_MAX) {
printk(KERN_WARNING "TSC: HPET/PMTIMER calibration "
"failed.\n");
pr_warn("HPET/PMTIMER calibration failed\n");
return 0;
}
/* Use the alternative source */
printk(KERN_INFO "TSC: using %s reference calibration\n",
hpet ? "HPET" : "PMTIMER");
pr_info("using %s reference calibration\n",
hpet ? "HPET" : "PMTIMER");
return tsc_ref_min;
}
/* We don't have an alternative source, use the PIT calibration value */
if (!hpet && !ref1 && !ref2) {
printk(KERN_INFO "TSC: Using PIT calibration value\n");
pr_info("Using PIT calibration value\n");
return tsc_pit_min;
}
/* The alternative source failed, use the PIT calibration value */
if (tsc_ref_min == ULONG_MAX) {
printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed. "
"Using PIT calibration\n");
pr_warn("HPET/PMTIMER calibration failed. Using PIT calibration.\n");
return tsc_pit_min;
}
......@@ -551,9 +549,9 @@ unsigned long native_calibrate_tsc(void)
* the PIT value as we know that there are PMTIMERs around
* running at double speed. At least we let the user know:
*/
printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n",
hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
printk(KERN_INFO "TSC: Using PIT calibration value\n");
pr_warn("PIT calibration deviates from %s: %lu %lu\n",
hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
pr_info("Using PIT calibration value\n");
return tsc_pit_min;
}
......@@ -785,7 +783,7 @@ void mark_tsc_unstable(char *reason)
tsc_unstable = 1;
sched_clock_stable = 0;
disable_sched_clock_irqtime();
printk(KERN_INFO "Marking TSC unstable due to %s\n", reason);
pr_info("Marking TSC unstable due to %s\n", reason);
/* Change only the rating, when not registered */
if (clocksource_tsc.mult)
clocksource_mark_unstable(&clocksource_tsc);
......@@ -912,9 +910,9 @@ static void tsc_refine_calibration_work(struct work_struct *work)
goto out;
tsc_khz = freq;
printk(KERN_INFO "Refined TSC clocksource calibration: "
"%lu.%03lu MHz.\n", (unsigned long)tsc_khz / 1000,
(unsigned long)tsc_khz % 1000);
pr_info("Refined TSC clocksource calibration: %lu.%03lu MHz\n",
(unsigned long)tsc_khz / 1000,
(unsigned long)tsc_khz % 1000);
out:
clocksource_register_khz(&clocksource_tsc, tsc_khz);
......@@ -970,9 +968,9 @@ void __init tsc_init(void)
return;
}
printk("Detected %lu.%03lu MHz processor.\n",
(unsigned long)cpu_khz / 1000,
(unsigned long)cpu_khz % 1000);
pr_info("Detected %lu.%03lu MHz processor\n",
(unsigned long)cpu_khz / 1000,
(unsigned long)cpu_khz % 1000);
/*
* Secondary CPUs do not run through tsc_init(), so set up
......
......@@ -28,6 +28,8 @@
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
......@@ -137,14 +139,14 @@ struct pt_regs *save_v86_state(struct kernel_vm86_regs *regs)
local_irq_enable();
if (!current->thread.vm86_info) {
printk("no vm86_info: BAD\n");
pr_alert("no vm86_info: BAD\n");
do_exit(SIGSEGV);
}
set_flags(regs->pt.flags, VEFLAGS, X86_EFLAGS_VIF | current->thread.v86mask);
tmp = copy_vm86_regs_to_user(&current->thread.vm86_info->regs, regs);
tmp += put_user(current->thread.screen_bitmap, &current->thread.vm86_info->screen_bitmap);
if (tmp) {
printk("vm86: could not access userspace vm86_info\n");
pr_alert("could not access userspace vm86_info\n");
do_exit(SIGSEGV);
}
......
......@@ -18,6 +18,8 @@
* use the vDSO.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/time.h>
#include <linux/init.h>
#include <linux/kernel.h>
......@@ -111,18 +113,13 @@ void update_vsyscall(struct timespec *wall_time, struct timespec *wtm,
static void warn_bad_vsyscall(const char *level, struct pt_regs *regs,
const char *message)
{
static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL, DEFAULT_RATELIMIT_BURST);
struct task_struct *tsk;
if (!show_unhandled_signals || !__ratelimit(&rs))
if (!show_unhandled_signals)
return;
tsk = current;
printk("%s%s[%d] %s ip:%lx cs:%lx sp:%lx ax:%lx si:%lx di:%lx\n",
level, tsk->comm, task_pid_nr(tsk),
message, regs->ip, regs->cs,
regs->sp, regs->ax, regs->si, regs->di);
pr_notice_ratelimited("%s%s[%d] %s ip:%lx cs:%lx sp:%lx ax:%lx si:%lx di:%lx\n",
level, current->comm, task_pid_nr(current),
message, regs->ip, regs->cs,
regs->sp, regs->ax, regs->si, regs->di);
}
static int addr_to_vsyscall_nr(unsigned long addr)
......
......@@ -3,6 +3,9 @@
*
* Author: Suresh Siddha <suresh.b.siddha@intel.com>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/bootmem.h>
#include <linux/compat.h>
#include <asm/i387.h>
......@@ -162,7 +165,7 @@ int save_i387_xstate(void __user *buf)
BUG_ON(sig_xstate_size < xstate_size);
if ((unsigned long)buf % 64)
printk("save_i387_xstate: bad fpstate %p\n", buf);
pr_err("%s: bad fpstate %p\n", __func__, buf);
if (!used_math())
return 0;
......@@ -422,7 +425,7 @@ static void __init xstate_enable_boot_cpu(void)
pcntxt_mask = eax + ((u64)edx << 32);
if ((pcntxt_mask & XSTATE_FPSSE) != XSTATE_FPSSE) {
printk(KERN_ERR "FP/SSE not shown under xsave features 0x%llx\n",
pr_err("FP/SSE not shown under xsave features 0x%llx\n",
pcntxt_mask);
BUG();
}
......@@ -445,9 +448,8 @@ static void __init xstate_enable_boot_cpu(void)
setup_xstate_init();
printk(KERN_INFO "xsave/xrstor: enabled xstate_bv 0x%llx, "
"cntxt size 0x%x\n",
pcntxt_mask, xstate_size);
pr_info("enabled xstate_bv 0x%llx, cntxt size 0x%x\n",
pcntxt_mask, xstate_size);
}
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment