Merge tag 'fixes-for-v5.0-rc4' of...

Merge tag 'fixes-for-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v5.0-rc4

Dwc3 got a fix for cases when gadget driver queue an OUT request of
length 0; this is a case that has been overlooked for quite some time
now.

Exynos' dwc3 glue layer got a fix on the error path for those cases
where clk_prepare_enable() fails.

TI's AM335x PHY driver got a fix for a race condition during
probe. This race happened because driver was powering off the PHY only
after adding the PHY handle to the framework. The result is that we
could fall into a situation where user of the PHY (MUSB) could call
phy_init() before phy driver's probe() called phy_poweroff() which
would result in a powered off PHY after phy_init() was called.

The old net2272 driver got a fix for an erroneous use of bitwise
negation.

* tag 'fixes-for-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
  usb: phy: am335x: fix race condition in _probe
  usb: dwc3: exynos: Fix error handling of clk_prepare_enable
  usb: phy: fix link errors
  usb: gadget: udc: net2272: Fix bitwise and boolean operations
  usb: dwc3: gadget: Handle 0 xfer length for OUT EP

drivers/usb/dwc3/dwc3-exynos.c

@@ -78,7 +78,7 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
 	for (i = 0; i < exynos->num_clks; i++) {
 		ret = clk_prepare_enable(exynos->clks[i]);
 		if (ret) {
-			while (--i > 0)
+			while (i-- > 0)
 				clk_disable_unprepare(exynos->clks[i]);
 			return ret;
 		}
@@ -223,7 +223,7 @@ static int dwc3_exynos_resume(struct device *dev)
 	for (i = 0; i < exynos->num_clks; i++) {
 		ret = clk_prepare_enable(exynos->clks[i]);
 		if (ret) {
-			while (--i > 0)
+			while (i-- > 0)
 				clk_disable_unprepare(exynos->clks[i]);
 			return ret;
 		}

drivers/usb/dwc3/gadget.c

@@ -1119,7 +1119,7 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
 	unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
 	unsigned int rem = length % maxp;
 
-	if (rem && usb_endpoint_dir_out(dep->endpoint.desc)) {
+	if ((!length || rem) && usb_endpoint_dir_out(dep->endpoint.desc)) {
 		struct dwc3	*dwc = dep->dwc;
 		struct dwc3_trb	*trb;
 

drivers/usb/gadget/udc/net2272.c

@@ -2083,7 +2083,7 @@ static irqreturn_t net2272_irq(int irq, void *_dev)
 #if defined(PLX_PCI_RDK2)
 	/* see if PCI int for us by checking irqstat */
 	intcsr = readl(dev->rdk2.fpga_base_addr + RDK2_IRQSTAT);
-	if (!intcsr & (1 << NET2272_PCI_IRQ)) {
+	if (!(intcsr & (1 << NET2272_PCI_IRQ))) {
 		spin_unlock(&dev->lock);
 		return IRQ_NONE;
 	}

drivers/usb/phy/Kconfig

@@ -21,7 +21,7 @@ config AB8500_USB
 
 config FSL_USB2_OTG
 	bool "Freescale USB OTG Transceiver Driver"
-	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM
+	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM=y && PM
 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help

drivers/usb/phy/phy-am335x.c

@@ -61,9 +61,6 @@ static int am335x_phy_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = usb_add_phy_dev(&am_phy->usb_phy_gen.phy);
-	if (ret)
-		return ret;
 	am_phy->usb_phy_gen.phy.init = am335x_init;
 	am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown;
 
@@ -82,7 +79,7 @@ static int am335x_phy_probe(struct platform_device *pdev)
 	device_set_wakeup_enable(dev, false);
 	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false);
 
-	return 0;
+	return usb_add_phy_dev(&am_phy->usb_phy_gen.phy);
 }
 
 static int am335x_phy_remove(struct platform_device *pdev)