powercap: idle_inject: Support 100% idle injection

The users of the idle injection framework allow 100% idle injection. For
example: thermal/cpuidle_cooling.c driver. When the ratio is set to
100%, the runtime_duration becomes zero.

However, idle_inject_set_duration() in the idle injection framework
silently ignores run_duration_us == 0 without any error (it is a void
function). The caller will then assume that everything is fine and
100% idle is effective, but in reality the idle duration will not
change.

There are two options:

 - The caller may change their max state to 99% instead of 100% and
   document that 100% is not supported by the idle inject framework.

 - Add 100% idle support to the idle inject framework.

Since there are other protections via RT throttling, this framework can
allow 100% idle. The RT throttling will be activated at 95% idle by
default. The caller disabling RT throttling and injecting 100% idle,
should be aware that CPU can't be used at all.

The idle inject timer is started for (run_duration_us + idle_duration_us)
duration. Hence replace (run_duration_us && idle_duration_us) with
(run_duration_us + idle_duration_us) in the function
idle_inject_set_duration(). Also check for !(run_duration_us +
idle_duration_us) to return -EINVAL in idle_inject_start().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

drivers/powercap/idle_inject.c

@@ -155,10 +155,12 @@ void idle_inject_set_duration(struct idle_inject_device *ii_dev,
 			      unsigned int run_duration_us,
 			      unsigned int idle_duration_us)
 {
-	if (run_duration_us && idle_duration_us) {
+	if (run_duration_us + idle_duration_us) {
 		WRITE_ONCE(ii_dev->run_duration_us, run_duration_us);
 		WRITE_ONCE(ii_dev->idle_duration_us, idle_duration_us);
 	}
+	if (!run_duration_us)
+		pr_debug("CPU is forced to 100 percent idle\n");
 }
 
 /**
@@ -201,7 +203,7 @@ int idle_inject_start(struct idle_inject_device *ii_dev)
 	unsigned int idle_duration_us = READ_ONCE(ii_dev->idle_duration_us);
 	unsigned int run_duration_us = READ_ONCE(ii_dev->run_duration_us);
 
-	if (!idle_duration_us || !run_duration_us)
+	if (!(idle_duration_us + run_duration_us))
 		return -EINVAL;
 
 	pr_debug("Starting injecting idle cycles on CPUs '%*pbl'\n",