Merge tag 'iio-for-5.3a' of...

Merge tag 'iio-for-5.3a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 5.3 cycle

New device support
* mt6577
  - add supprot for the mt6765 which requires a few minor additional
    new features in the driver.

Yaml binding conversions
* adxl345
* isl29018
* tsl2583
* tsl2772

Minor features and improvements
* ad5758
  - declare an of_device_id table rather than just relying on the spi
    fallback which doesn't use the manufacturer id.
  - drop a set but not used variable left from previous refactor.
* ad7816
  - Add a bit more description to kconfig text.
* ad9523
  - change calculation order to improve frequency accuracy.
* adxl372
  - declare an of_device_id table
* adt7316
  - white space.
* at91_adc
  - Use dev_get_drvdata directly rather than boucing to the platform device
    and back again.
* cros_ec
  - add an id sysfs entry to bring in line with the other implementations.
* ds5522
  - drop a check on the of_node existing as we don't actually use it for
    anything.
* kxsd9
  - declare an of_device_id table.
* maxim_thermocouple
  - declare an of_device_id table.
* mt6577
  - add dt binding entry for mt8183 which is also supported.
* rcar-gyroadc
  - tidy up unnecessary error messages.
* stm32-dfsdm
  - improved error handling.
* stmpe-adc
  - drop an unnecessary variable assignment.
  - add an of_device_id table.
  - reinit completion on begin converstion to avoid a path in which
    previous round had been interrupted, also switch to non interruptible
    wait to avoid an issue with a user program using -pg
  - simplify interrupt handling by just having them always enabled.
  - reset all interrupts on startup and in the timeout handler to
    avoid getting stuck.
* sun4i-gpadc
  - SPDX

* tag 'iio-for-5.3a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (28 commits)
  iio: adc: mediatek: mt6577-auxadc, add mt6765 support
  dt-bindings: iio: adc: mediatek: Add document for mt6765
  dt-bindings: iio: accel: adxl345: switch to YAML bindings
  iio: adc: sun4i-gpadc-iio convert to SPDX license tags
  iio: ad9523-1: Improve reported VCO frequency accuracy
  iio: dac: ds4422/ds4424 drop of_node check
  iio: stmpe-adc: Reset possible interrupts
  iio: stmpe-adc: Use wait_for_completion_timeout
  iio: stmpe-adc: Enable all stmpe-adc interrupts just once
  iio: stmpe-adc: Reinit completion struct on begin conversion
  iio: stmpe-adc: Add compatible name
  iio: stmpe-adc: Remove unnecessary assignment
  staging: iio: adc: Add paragraph to describe Kconfig symbol
  staging: iio: adt7316: match parenthesis alignment
  iio: adc: rcar-gyroadc: Remove devm_iio_device_alloc() error printing
  dt-bindings: iio: isl29018: convert bindings to YAML format
  dt-bindings: adc: mt8183: add binding document
  iio: dac: ad5758: remove set but not used variable 'dc_dc_mode'
  iio: cros_ec: add 'id' sysfs entry
  iio: adc: stm32-dfsdm: missing error case during probe
  ...

Documentation/ABI/testing/sysfs-bus-iio-cros-ec

@@ -18,11 +18,11 @@ Description:
 		values are 'base' and 'lid'.
 
 What:		/sys/bus/iio/devices/iio:deviceX/id
-Date:		Septembre 2017
+Date:		September 2017
 KernelVersion:	4.14
 Contact:	linux-iio@vger.kernel.org
 Description:
-		This attribute is exposed by the CrOS EC legacy accelerometer
-		driver and represents the sensor ID as exposed by the EC. This
-		ID is used by the Android sensor service hardware abstraction
-		layer (sensor HAL) through the Android container on ChromeOS.
+		This attribute is exposed by the CrOS EC sensors driver and
+		represents the sensor ID as exposed by the EC. This ID is used
+		by the Android sensor service hardware abstraction layer (sensor
+		HAL) through the Android container on ChromeOS.

Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl345.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
+  both I2C & SPI interfaces.
+    http://www.analog.com/en/products/mems/accelerometers/adxl345.html
+    http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl345
+      - adi,adxl375
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@2a {
+            compatible = "adi,adxl345";
+            reg = <0x53>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "adi,adxl345";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpol;
+            spi-cpha;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };

Documentation/devicetree/bindings/iio/accel/adxl345.txt

-Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers
-
-http://www.analog.com/en/products/mems/accelerometers/adxl345.html
-http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
-
-Required properties:
- - compatible : should be one of
-		"adi,adxl345"
-		"adi,adxl375"
- - reg : the I2C address or SPI chip select number of the sensor
-
-Required properties for SPI bus usage:
- - spi-max-frequency : set maximum clock frequency, must be 5000000
- - spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3
-
-Optional properties:
- - interrupts: interrupt mapping for IRQ as documented in
-   Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Example for a I2C device node:
-
-	accelerometer@2a {
-		compatible = "adi,adxl345";
-		reg = <0x53>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-Example for a SPI device node:
-
-	accelerometer@0 {
-		compatible = "adi,adxl345";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-		spi-cpol;
-		spi-cpha;
-		interrupt-parent = <&gpio1>;
-		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-	};

Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt

@@ -13,8 +13,10 @@ Required properties:
   - compatible: Should be one of:
     - "mediatek,mt2701-auxadc": For MT2701 family of SoCs
     - "mediatek,mt2712-auxadc": For MT2712 family of SoCs
+    - "mediatek,mt6765-auxadc": For MT6765 family of SoCs
     - "mediatek,mt7622-auxadc": For MT7622 family of SoCs
     - "mediatek,mt8173-auxadc": For MT8173 family of SoCs
+    - "mediatek,mt8183-auxadc", "mediatek,mt8173-auxadc": For MT8183 family of SoCs
   - reg: Address range of the AUXADC unit.
   - clocks: Should contain a clock specifier for each entry in clock-names
   - clock-names: Should contain "main".

Documentation/devicetree/bindings/iio/light/isl29018.txt

-* ISL 29018/29023/29035 I2C ALS, Proximity, and Infrared sensor
-
-Required properties:
-
-  - compatible: Should be one of
-		"isil,isl29018"
-		"isil,isl29023"
-		"isil,isl29035"
-  - reg: the I2C address of the device
-
-Optional properties:
-
-  - interrupts: the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt client
-  node bindings.
-
-  - vcc-supply: phandle to the regulator that provides power to the sensor.
-
-Example:
-
-isl29018@44 {
-	compatible = "isil,isl29018";
-	reg = <0x44>;
-	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
-};

Documentation/devicetree/bindings/iio/light/isl29018.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/isl29018.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: |
+  Intersil 29018/29023/29035 Ambient Light, Infrared Light, and Proximity Sensor
+
+maintainers:
+  - Brian Masney <masneyb@onstation.org>
+
+description: |
+  Ambient and infrared light sensing with proximity detection over an i2c
+  interface.
+
+  https://www.renesas.com/us/en/www/doc/datasheet/isl29018.pdf
+  https://www.renesas.com/us/en/www/doc/datasheet/isl29023.pdf
+  https://www.renesas.com/us/en/www/doc/datasheet/isl29035.pdf
+
+properties:
+  compatible:
+    enum:
+      - isil,isl29018
+      - isil,isl29023
+      - isil,isl29035
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vcc-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@44 {
+                compatible = "isil,isl29018";
+                reg = <0x44>;
+                interrupts-extended = <&msmgpio 61 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...

Documentation/devicetree/bindings/iio/light/tsl2583.txt

-* TAOS TSL 2580/2581/2583 ALS sensor
-
-Required properties:
-
-  - compatible: Should be one of
-		"amstaos,tsl2580"
-		"amstaos,tsl2581"
-		"amstaos,tsl2583"
-  - reg: the I2C address of the device
-
-Optional properties:
-
-  - interrupts: the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt client
-  node bindings.
-
-  - vcc-supply: phandle to the regulator that provides power to the sensor.
-
-Example:
-
-tsl2581@29 {
-	compatible = "amstaos,tsl2581";
-	reg = <0x29>;
-};

Documentation/devicetree/bindings/iio/light/tsl2583.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/tsl2583.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS/TAOS Ambient Light Sensor (ALS)
+
+maintainers:
+  - Brian Masney <masneyb@onstation.org>
+
+description: |
+  Ambient light sensing with an i2c interface.
+
+properties:
+  compatible:
+    enum:
+      - amstaos,tsl2580
+      - amstaos,tsl2581
+      - amstaos,tsl2583
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vcc-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@29 {
+                compatible = "amstaos,tsl2581";
+                reg = <0x29>;
+        };
+    };
+...

Documentation/devicetree/bindings/iio/light/tsl2772.txt

-* AMS/TAOS ALS and proximity sensor
-
-Required properties:
-
-  - compatible: Should be one of
-		"amstaos,tsl2571"
-		"amstaos,tsl2671"
-		"amstaos,tmd2671"
-		"amstaos,tsl2771"
-		"amstaos,tmd2771"
-		"amstaos,tsl2572"
-		"amstaos,tsl2672"
-		"amstaos,tmd2672"
-		"amstaos,tsl2772"
-		"amstaos,tmd2772"
-		"avago,apds9930"
-  - reg: the I2C address of the device
-
-Optional properties:
-
-  - amstaos,proximity-diodes - proximity diodes to enable. <0>, <1>, or <0 1>
-                               are the only valid values.
-  - led-max-microamp - current for the proximity LED. Must be 100000, 50000,
-                       25000, or 13000.
-  - vdd-supply: phandle to the regulator that provides power to the sensor.
-  - vddio-supply: phandle to the regulator that provides power to the bus.
-  - interrupts: the sole interrupt generated by the device
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt client
-  node bindings.
-
-Example:
-
-tsl2772@39 {
-	compatible = "amstaos,tsl2772";
-	reg = <0x39>;
-	interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
-	vdd-supply = <&pm8941_l17>;
-	vddio-supply = <&pm8941_lvs1>;
-	amstaos,proximity-diodes = <0>;
-	led-max-microamp = <100000>;
-};

Documentation/devicetree/bindings/iio/light/tsl2772.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/tsl2772.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS/TAOS Ambient Light Sensor (ALS) and Proximity Detector
+
+maintainers:
+  - Brian Masney <masneyb@onstation.org>
+
+description: |
+  Ambient light sensing and proximity detection with an i2c interface.
+  https://ams.com/documents/20143/36005/TSL2772_DS000181_2-00.pdf
+
+properties:
+  compatible:
+    enum:
+      - amstaos,tsl2571
+      - amstaos,tsl2671
+      - amstaos,tmd2671
+      - amstaos,tsl2771
+      - amstaos,tmd2771
+      - amstaos,tsl2572
+      - amstaos,tsl2672
+      - amstaos,tmd2672
+      - amstaos,tsl2772
+      - amstaos,tmd2772
+      - avago,apds9930
+
+  reg:
+    maxItems: 1
+
+  amstaos,proximity-diodes:
+    description: Proximity diodes to enable
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 1
+        maxItems: 2
+        items:
+          minimum: 0
+          maximum: 1
+
+  interrupts:
+    maxItems: 1
+
+  led-max-microamp:
+    description: Current for the proximity LED
+    enum:
+      - 13000
+      - 25000
+      - 50000
+      - 100000
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@39 {
+                compatible = "amstaos,tsl2772";
+                reg = <0x39>;
+                interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+                vdd-supply = <&pm8941_l17>;
+                vddio-supply = <&pm8941_lvs1>;
+                amstaos,proximity-diodes = <0>;
+                led-max-microamp = <100000>;
+        };
+    };
+...

MAINTAINERS

@@ -551,6 +551,7 @@ W:	http://wiki.analog.com/ADXL345
 W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
 F:	drivers/input/misc/adxl34x.c
+F:	Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
 
 ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
 M:	Stefan Popa <stefan.popa@analog.com>

drivers/iio/accel/adxl372_spi.c

@@ -7,6 +7,8 @@
 
 #include <linux/module.h>
 #include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/spi/spi.h>
 
 #include "adxl372.h"
@@ -37,9 +39,16 @@ static const struct spi_device_id adxl372_spi_id[] = {
 };
 MODULE_DEVICE_TABLE(spi, adxl372_spi_id);
 
+static const struct of_device_id adxl372_of_match[] = {
+        { .compatible = "adi,adxl372" },
+        { },
+};
+MODULE_DEVICE_TABLE(of, adxl372_of_match);
+
 static struct spi_driver adxl372_spi_driver = {
 	.driver = {
 		.name = "adxl372_spi",
+		.of_match_table = adxl372_of_match,
 	},
 	.probe = adxl372_spi_probe,
 	.id_table = adxl372_spi_id,

drivers/iio/accel/kxsd9-spi.c

 #include <linux/device.h>
 #include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/spi/spi.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -40,10 +42,17 @@ static const struct spi_device_id kxsd9_spi_id[] = {
 };
 MODULE_DEVICE_TABLE(spi, kxsd9_spi_id);
 
+static const struct of_device_id kxsd9_of_match[] = {
+        { .compatible = "kionix,kxsd9" },
+        { },
+};
+MODULE_DEVICE_TABLE(of, kxsd9_of_match);
+
 static struct spi_driver kxsd9_spi_driver = {
 	.driver = {
 		.name = "kxsd9",
 		.pm = &kxsd9_dev_pm_ops,
+		.of_match_table = kxsd9_of_match,
 	},
 	.probe = kxsd9_spi_probe,
 	.remove = kxsd9_spi_remove,

drivers/iio/adc/at91-sama5d2_adc.c

@@ -1586,8 +1586,7 @@ static void at91_adc_hw_init(struct at91_adc_state *st)
 static ssize_t at91_adc_get_fifo_state(struct device *dev,
 				       struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev =
-			platform_get_drvdata(to_platform_device(dev));
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct at91_adc_state *st = iio_priv(indio_dev);
 
 	return scnprintf(buf, PAGE_SIZE, "%d\n", !!st->dma_st.dma_chan);
@@ -1596,8 +1595,7 @@ static ssize_t at91_adc_get_fifo_state(struct device *dev,
 static ssize_t at91_adc_get_watermark(struct device *dev,
 				      struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev =
-			platform_get_drvdata(to_platform_device(dev));
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct at91_adc_state *st = iio_priv(indio_dev);
 
 	return scnprintf(buf, PAGE_SIZE, "%d\n", st->dma_st.watermark);
@@ -1849,8 +1847,7 @@ static int at91_adc_remove(struct platform_device *pdev)
 
 static __maybe_unused int at91_adc_suspend(struct device *dev)
 {
-	struct iio_dev *indio_dev =
-			platform_get_drvdata(to_platform_device(dev));
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct at91_adc_state *st = iio_priv(indio_dev);
 
 	/*
@@ -1870,8 +1867,7 @@ static __maybe_unused int at91_adc_suspend(struct device *dev)
 
 static __maybe_unused int at91_adc_resume(struct device *dev)
 {
-	struct iio_dev *indio_dev =
-			platform_get_drvdata(to_platform_device(dev));
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct at91_adc_state *st = iio_priv(indio_dev);
 	int ret;
 

drivers/iio/adc/at91_adc.c

@@ -1360,7 +1360,7 @@ static int at91_adc_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM_SLEEP
 static int at91_adc_suspend(struct device *dev)
 {
-	struct iio_dev *idev = platform_get_drvdata(to_platform_device(dev));
+	struct iio_dev *idev = dev_get_drvdata(dev);
 	struct at91_adc_state *st = iio_priv(idev);
 
 	pinctrl_pm_select_sleep_state(dev);
@@ -1371,7 +1371,7 @@ static int at91_adc_suspend(struct device *dev)
 
 static int at91_adc_resume(struct device *dev)
 {
-	struct iio_dev *idev = platform_get_drvdata(to_platform_device(dev));
+	struct iio_dev *idev = dev_get_drvdata(dev);
 	struct at91_adc_state *st = iio_priv(idev);
 
 	clk_prepare_enable(st->clk);

drivers/iio/adc/mt6577_auxadc.c

@@ -42,10 +42,26 @@
 #define MT6577_AUXADC_POWER_READY_MS          1
 #define MT6577_AUXADC_SAMPLE_READY_US         25
 
+struct mtk_auxadc_compatible {
+	bool sample_data_cali;
+	bool check_global_idle;
+};
+
 struct mt6577_auxadc_device {
 	void __iomem *reg_base;
 	struct clk *adc_clk;
 	struct mutex lock;
+	const struct mtk_auxadc_compatible *dev_comp;
+};
+
+static const struct mtk_auxadc_compatible mt8173_compat = {
+	.sample_data_cali = false,
+	.check_global_idle = true,
+};
+
+static const struct mtk_auxadc_compatible mt6765_compat = {
+	.sample_data_cali = true,
+	.check_global_idle = false,
 };
 
 #define MT6577_AUXADC_CHANNEL(idx) {				    \
@@ -74,6 +90,11 @@ static const struct iio_chan_spec mt6577_auxadc_iio_channels[] = {
 	MT6577_AUXADC_CHANNEL(15),
 };
 
+static int mt_auxadc_get_cali_data(int rawdata, bool enable_cali)
+{
+	return rawdata;
+}
+
 static inline void mt6577_auxadc_mod_reg(void __iomem *reg,
 					 u32 or_mask, u32 and_mask)
 {
@@ -120,15 +141,17 @@ static int mt6577_auxadc_read(struct iio_dev *indio_dev,
 	/* we must delay here for hardware sample channel data */
 	udelay(MT6577_AUXADC_SAMPLE_READY_US);
 
-	/* check MTK_AUXADC_CON2 if auxadc is idle */
-	ret = readl_poll_timeout(adc_dev->reg_base + MT6577_AUXADC_CON2, val,
-				 ((val & MT6577_AUXADC_STA) == 0),
-				 MT6577_AUXADC_SLEEP_US,
-				 MT6577_AUXADC_TIMEOUT_US);
-	if (ret < 0) {
-		dev_err(indio_dev->dev.parent,
-			"wait for auxadc idle time out\n");
-		goto err_timeout;
+	if (adc_dev->dev_comp->check_global_idle) {
+		/* check MTK_AUXADC_CON2 if auxadc is idle */
+		ret = readl_poll_timeout(adc_dev->reg_base + MT6577_AUXADC_CON2,
+					 val, ((val & MT6577_AUXADC_STA) == 0),
+					 MT6577_AUXADC_SLEEP_US,
+					 MT6577_AUXADC_TIMEOUT_US);
+		if (ret < 0) {
+			dev_err(indio_dev->dev.parent,
+				"wait for auxadc idle time out\n");
+			goto err_timeout;
+		}
 	}
 
 	/* read channel and make sure ready bit == 1 */
@@ -163,6 +186,8 @@ static int mt6577_auxadc_read_raw(struct iio_dev *indio_dev,
 				  int *val2,
 				  long info)
 {
+	struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev);
+
 	switch (info) {
 	case IIO_CHAN_INFO_PROCESSED:
 		*val = mt6577_auxadc_read(indio_dev, chan);
@@ -172,6 +197,8 @@ static int mt6577_auxadc_read_raw(struct iio_dev *indio_dev,
 				chan->channel);
 			return *val;
 		}
+		if (adc_dev->dev_comp->sample_data_cali)
+			*val = mt_auxadc_get_cali_data(*val, true);
 		return IIO_VAL_INT;
 
 	default:
@@ -304,10 +331,11 @@ static SIMPLE_DEV_PM_OPS(mt6577_auxadc_pm_ops,
 			 mt6577_auxadc_resume);
 
 static const struct of_device_id mt6577_auxadc_of_match[] = {
-	{ .compatible = "mediatek,mt2701-auxadc", },
-	{ .compatible = "mediatek,mt2712-auxadc", },
-	{ .compatible = "mediatek,mt7622-auxadc", },
-	{ .compatible = "mediatek,mt8173-auxadc", },
+	{ .compatible = "mediatek,mt2701-auxadc", .data = &mt8173_compat},
+	{ .compatible = "mediatek,mt2712-auxadc", .data = &mt8173_compat},
+	{ .compatible = "mediatek,mt7622-auxadc", .data = &mt8173_compat},
+	{ .compatible = "mediatek,mt8173-auxadc", .data = &mt8173_compat},
+	{ .compatible = "mediatek,mt6765-auxadc", .data = &mt6765_compat},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mt6577_auxadc_of_match);

drivers/iio/adc/rcar-gyroadc.c

@@ -485,10 +485,8 @@ static int rcar_gyroadc_probe(struct platform_device *pdev)
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
-	if (!indio_dev) {
-		dev_err(dev, "Failed to allocate IIO device.\n");
+	if (!indio_dev)
 		return -ENOMEM;
-	}
 
 	priv = iio_priv(indio_dev);
 	priv->dev = dev;

drivers/iio/adc/stm32-dfsdm-adc.c

@@ -1456,6 +1456,12 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
 	 * So IRQ associated to filter instance 0 is dedicated to the Filter 0.
 	 */
 	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		if (irq != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get IRQ: %d\n", irq);
+		return irq;
+	}
+
 	ret = devm_request_irq(dev, irq, stm32_dfsdm_irq,
 			       0, pdev->name, adc);
 	if (ret < 0) {

drivers/iio/adc/stm32-dfsdm-core.c

@@ -233,6 +233,8 @@ static int stm32_dfsdm_parse_of(struct platform_device *pdev,
 	}
 	priv->dfsdm.phys_base = res->start;
 	priv->dfsdm.base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->dfsdm.base))
+		return PTR_ERR(priv->dfsdm.base);
 
 	/*
 	 * "dfsdm" clock is mandatory for DFSDM peripheral clocking.
@@ -242,8 +244,10 @@ static int stm32_dfsdm_parse_of(struct platform_device *pdev,
 	 */
 	priv->clk = devm_clk_get(&pdev->dev, "dfsdm");
 	if (IS_ERR(priv->clk)) {
-		dev_err(&pdev->dev, "No stm32_dfsdm_clk clock found\n");
-		return -EINVAL;
+		ret = PTR_ERR(priv->clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get clock (%d)\n", ret);
+		return ret;
 	}
 
 	priv->aclk = devm_clk_get(&pdev->dev, "audio");

drivers/iio/adc/stmpe-adc.c

@@ -65,6 +65,8 @@ static int stmpe_read_voltage(struct stmpe_adc *info,
 
 	mutex_lock(&info->lock);
 
+	reinit_completion(&info->completion);
+
 	info->channel = (u8)chan->channel;
 
 	if (info->channel > STMPE_ADC_LAST_NR) {
@@ -72,23 +74,16 @@ static int stmpe_read_voltage(struct stmpe_adc *info,
 		return -EINVAL;
 	}
 
-	stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_EN,
-			STMPE_ADC_CH(info->channel));
-
 	stmpe_reg_write(info->stmpe, STMPE_REG_ADC_CAPT,
 			STMPE_ADC_CH(info->channel));
 
-	*val = info->value;
-
-	ret = wait_for_completion_interruptible_timeout
-		(&info->completion, STMPE_ADC_TIMEOUT);
+	ret = wait_for_completion_timeout(&info->completion, STMPE_ADC_TIMEOUT);
 
 	if (ret <= 0) {
+		stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA,
+				STMPE_ADC_CH(info->channel));
 		mutex_unlock(&info->lock);
-		if (ret == 0)
-			return -ETIMEDOUT;
-		else
-			return ret;
+		return -ETIMEDOUT;
 	}
 
 	*val = info->value;
@@ -105,6 +100,8 @@ static int stmpe_read_temp(struct stmpe_adc *info,
 
 	mutex_lock(&info->lock);
 
+	reinit_completion(&info->completion);
+
 	info->channel = (u8)chan->channel;
 
 	if (info->channel != STMPE_TEMP_CHANNEL) {
@@ -115,15 +112,11 @@ static int stmpe_read_temp(struct stmpe_adc *info,
 	stmpe_reg_write(info->stmpe, STMPE_REG_TEMP_CTRL,
 			STMPE_START_ONE_TEMP_CONV);
 
-	ret = wait_for_completion_interruptible_timeout
-		(&info->completion, STMPE_ADC_TIMEOUT);
+	ret = wait_for_completion_timeout(&info->completion, STMPE_ADC_TIMEOUT);
 
 	if (ret <= 0) {
 		mutex_unlock(&info->lock);
-		if (ret == 0)
-			return -ETIMEDOUT;
-		else
-			return ret;
+		return -ETIMEDOUT;
 	}
 
 	/*
@@ -331,6 +324,12 @@ static int stmpe_adc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_EN,
+			~(norequest_mask & 0xFF));
+
+	stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA,
+			~(norequest_mask & 0xFF));
+
 	return devm_iio_device_register(&pdev->dev, indio_dev);
 }
 
@@ -353,9 +352,14 @@ static struct platform_driver stmpe_adc_driver = {
 		.pm	= &stmpe_adc_pm_ops,
 	},
 };
-
 module_platform_driver(stmpe_adc_driver);
 
+static const struct of_device_id stmpe_adc_ids[] = {
+	{ .compatible = "st,stmpe-adc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, stmpe_adc_ids);
+
 MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>");
 MODULE_DESCRIPTION("STMPEXXX ADC driver");
 MODULE_LICENSE("GPL v2");

drivers/iio/adc/sun4i-gpadc-iio.c

+// SPDX-License-Identifier: GPL-2.0
 /* ADC driver for sunxi platforms' (A10, A13 and A31) GPADC
  *
  * Copyright (c) 2016 Quentin Schulz <quentin.schulz@free-electrons.com>
  *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- *
  * The Allwinner SoCs all have an ADC that can also act as a touchscreen
  * controller and a thermal sensor.
  * The thermal sensor works only when the ADC acts as a touchscreen controller

drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c

@@ -125,6 +125,15 @@ static ssize_t cros_ec_sensors_calibrate(struct iio_dev *indio_dev,
 	return ret ? ret : len;
 }
 
+static ssize_t cros_ec_sensors_id(struct iio_dev *indio_dev,
+				  uintptr_t private,
+				  const struct iio_chan_spec *chan, char *buf)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", st->param.info.sensor_num);
+}
+
 static ssize_t cros_ec_sensors_loc(struct iio_dev *indio_dev,
 		uintptr_t private, const struct iio_chan_spec *chan,
 		char *buf)
@@ -140,6 +149,11 @@ const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[] = {
 		.shared = IIO_SHARED_BY_ALL,
 		.write = cros_ec_sensors_calibrate
 	},
+	{
+		.name = "id",
+		.shared = IIO_SHARED_BY_ALL,
+		.read = cros_ec_sensors_id
+	},
 	{
 		.name = "location",
 		.shared = IIO_SHARED_BY_ALL,

drivers/iio/dac/ad5758.c

@@ -11,6 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/property.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/spi/spi.h>
 #include <linux/gpio/consumer.h>
 
@@ -582,7 +584,7 @@ static ssize_t ad5758_write_powerdown(struct iio_dev *indio_dev,
 {
 	struct ad5758_state *st = iio_priv(indio_dev);
 	bool pwr_down;
-	unsigned int dc_dc_mode, dac_config_mode, val;
+	unsigned int dac_config_mode, val;
 	unsigned long int dac_config_msk;
 	int ret;
 
@@ -591,13 +593,10 @@ static ssize_t ad5758_write_powerdown(struct iio_dev *indio_dev,
 		return ret;
 
 	mutex_lock(&st->lock);
-	if (pwr_down) {
-		dc_dc_mode = AD5758_DCDC_MODE_POWER_OFF;
+	if (pwr_down)
 		val = 0;
-	} else {
-		dc_dc_mode = st->dc_dc_mode;
+	else
 		val = 1;
-	}
 
 	dac_config_mode = AD5758_DAC_CONFIG_OUT_EN_MODE(val) |
 			  AD5758_DAC_CONFIG_INT_EN_MODE(val);
@@ -885,9 +884,16 @@ static const struct spi_device_id ad5758_id[] = {
 };
 MODULE_DEVICE_TABLE(spi, ad5758_id);
 
+static const struct of_device_id ad5758_of_match[] = {
+        { .compatible = "adi,ad5758" },
+        { },
+};
+MODULE_DEVICE_TABLE(of, ad5758_of_match);
+
 static struct spi_driver ad5758_driver = {
 	.driver = {
 		.name = KBUILD_MODNAME,
+		.of_match_table = ad5758_of_match,
 	},
 	.probe = ad5758_probe,
 	.id_table = ad5758_id,

drivers/iio/dac/ds4424.c

@@ -236,12 +236,6 @@ static int ds4424_probe(struct i2c_client *client,
 	indio_dev->dev.of_node = client->dev.of_node;
 	indio_dev->dev.parent = &client->dev;
 
-	if (!client->dev.of_node) {
-		dev_err(&client->dev,
-				"Not found DT.\n");
-		return -ENODEV;
-	}
-
 	data->vcc_reg = devm_regulator_get(&client->dev, "vcc");
 	if (IS_ERR(data->vcc_reg)) {
 		dev_err(&client->dev,

drivers/iio/frequency/ad9523.c

@@ -862,9 +862,11 @@ static int ad9523_setup(struct iio_dev *indio_dev)
 	if (ret < 0)
 		return ret;
 
-	st->vco_freq = (pdata->vcxo_freq * (pdata->pll2_freq_doubler_en ? 2 : 1)
-			/ pdata->pll2_r2_div) * AD9523_PLL2_FB_NDIV(pdata->
-			pll2_ndiv_a_cnt, pdata->pll2_ndiv_b_cnt);
+	st->vco_freq = div_u64((unsigned long long)pdata->vcxo_freq *
+			       (pdata->pll2_freq_doubler_en ? 2 : 1) *
+			       AD9523_PLL2_FB_NDIV(pdata->pll2_ndiv_a_cnt,
+						   pdata->pll2_ndiv_b_cnt),
+			       pdata->pll2_r2_div);
 
 	ret = ad9523_write(indio_dev, AD9523_PLL2_VCO_CTRL,
 		AD9523_PLL2_VCO_CALIBRATE);

drivers/iio/temperature/maxim_thermocouple.c

@@ -10,6 +10,8 @@
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/spi/spi.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/trigger.h>
@@ -262,9 +264,17 @@ static const struct spi_device_id maxim_thermocouple_id[] = {
 };
 MODULE_DEVICE_TABLE(spi, maxim_thermocouple_id);
 
+static const struct of_device_id maxim_thermocouple_of_match[] = {
+        { .compatible = "maxim,max6675" },
+        { .compatible = "maxim,max31855" },
+        { },
+};
+MODULE_DEVICE_TABLE(of, maxim_thermocouple_of_match);
+
 static struct spi_driver maxim_thermocouple_driver = {
 	.driver = {
 		.name	= MAXIM_THERMOCOUPLE_DRV_NAME,
+		.of_match_table = maxim_thermocouple_of_match,
 	},
 	.probe		= maxim_thermocouple_probe,
 	.remove		= maxim_thermocouple_remove,

drivers/staging/iio/adc/Kconfig

@@ -12,6 +12,9 @@ config AD7816
 	  Say yes here to build support for Analog Devices AD7816/7/8
 	  temperature sensors and ADC.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7816.
+
 config AD7192
 	tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver"
 	depends on SPI

drivers/staging/iio/addac/adt7316.c

@@ -2154,7 +2154,7 @@ int adt7316_probe(struct device *dev, struct adt7316_bus *bus,
 		chip->dac_bits = 8;
 
 	chip->ldac_pin = devm_gpiod_get_optional(dev, "adi,ldac",
-						GPIOD_OUT_LOW);
+						 GPIOD_OUT_LOW);
 	if (IS_ERR(chip->ldac_pin)) {
 		ret = PTR_ERR(chip->ldac_pin);
 		dev_err(dev, "Failed to request ldac GPIO: %d\n", ret);