Commit c908fd08 authored by Fabrizio Castro's avatar Fabrizio Castro Committed by Simon Horman

dt-bindings: can: rcar_canfd: document r8a774c0 support

Document the support for rcar_canfd on R8A774C0 SoC devices.
Signed-off-by: default avatarFabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: default avatarChris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Acked-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent 485dccb4
......@@ -3,7 +3,8 @@ Renesas R-Car CAN FD controller Device Tree Bindings
Required properties:
- compatible: Must contain one or more of the following:
- "renesas,rcar-gen3-canfd" for R-Car Gen3 compatible controller.
- "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers.
- "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller.
- "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
- "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
- "renesas,r8a77965-canfd" for R8A77965 (R-Car M3-N) compatible controller.
......@@ -28,12 +29,13 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each
child node supports the "status" property only, which is used to
enable/disable the respective channel.
Required properties for "renesas,r8a7795-canfd", "renesas,r8a7796-canfd",
"renesas,r8a77965-canfd" and "renesas,r8a77990-canfd" compatible:
In R8A7795, R8A7796, R8A77965 and R8A77990 SoCs, canfd clock is a div6 clock
and can be used by both CAN and CAN FD controller at the same time. It needs
to be scaled to maximum frequency if any of these controllers use it. This is
done using the below properties:
Required properties for "renesas,r8a774c0-canfd", "renesas,r8a7795-canfd",
"renesas,r8a7796-canfd", "renesas,r8a77965-canfd", and "renesas,r8a77990-canfd"
compatible:
In R8A774C0, R8A7795, R8A7796, R8A77965, and R8A77990 SoCs, canfd clock is a
div6 clock and can be used by both CAN and CAN FD controller at the same time.
It needs to be scaled to maximum frequency if any of these controllers use it.
This is done using the below properties:
- assigned-clocks: phandle of canfd clock.
- assigned-clock-rates: maximum frequency of this clock.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment