[SCSI] mpt2sas: Fixed Big Indian Issues on 32 bit PPC

This patch addresses many endian issues solved by runing sparse with the
option __CHECK_ENDIAN__ turned on.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/mpt2sas/mpt2sas_base.c

@@ -94,7 +94,7 @@ module_param(diag_buffer_enable, int, 0);
 MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers "
     "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
 
-int mpt2sas_fwfault_debug;
+static int mpt2sas_fwfault_debug;
 MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
     "and halt firmware - (default=0)");
 
@@ -857,7 +857,7 @@ _base_interrupt(int irq, void *bus_id)
 	completed_cmds = 0;
 	cb_idx = 0xFF;
 	do {
-		rd.word = rpf->Words;
+		rd.word = le64_to_cpu(rpf->Words);
 		if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
 			goto out;
 		reply = 0;
@@ -906,7 +906,7 @@ _base_interrupt(int irq, void *bus_id)
 
  next:
 
-		rpf->Words = ULLONG_MAX;
+		rpf->Words = cpu_to_le64(ULLONG_MAX);
 		ioc->reply_post_host_index = (ioc->reply_post_host_index ==
 		    (ioc->reply_post_queue_depth - 1)) ? 0 :
 		    ioc->reply_post_host_index + 1;
@@ -1817,7 +1817,9 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
 	char desc[16];
 	u8 revision;
 	u32 iounit_pg1_flags;
+	u32 bios_version;
 
+	bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
 	pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision);
 	strncpy(desc, ioc->manu_pg0.ChipName, 16);
 	printk(MPT2SAS_INFO_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "
@@ -1828,10 +1830,10 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
 	   (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
 	   ioc->facts.FWVersion.Word & 0x000000FF,
 	   revision,
-	   (ioc->bios_pg3.BiosVersion & 0xFF000000) >> 24,
-	   (ioc->bios_pg3.BiosVersion & 0x00FF0000) >> 16,
-	   (ioc->bios_pg3.BiosVersion & 0x0000FF00) >> 8,
-	    ioc->bios_pg3.BiosVersion & 0x000000FF);
+	   (bios_version & 0xFF000000) >> 24,
+	   (bios_version & 0x00FF0000) >> 16,
+	   (bios_version & 0x0000FF00) >> 8,
+	    bios_version & 0x000000FF);
 
 	_base_display_dell_branding(ioc);
 	_base_display_intel_branding(ioc);
@@ -2150,7 +2152,7 @@ _base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc)
 static int
 _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 {
-	Mpi2IOCFactsReply_t *facts;
+	struct mpt2sas_facts *facts;
 	u32 queue_size, queue_diff;
 	u16 max_sge_elements;
 	u16 num_of_reply_frames;
@@ -2783,7 +2785,7 @@ _base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes,
 	int i;
 	u8 failed;
 	u16 dummy;
-	u32 *mfp;
+	__le32 *mfp;
 
 	/* make sure doorbell is not in use */
 	if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
@@ -2871,7 +2873,7 @@ _base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes,
 	writel(0, &ioc->chip->HostInterruptStatus);
 
 	if (ioc->logging_level & MPT_DEBUG_INIT) {
-		mfp = (u32 *)reply;
+		mfp = (__le32 *)reply;
 		printk(KERN_INFO "\toffset:data\n");
 		for (i = 0; i < reply_bytes/4; i++)
 			printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4,
@@ -3097,7 +3099,8 @@ static int
 _base_get_port_facts(struct MPT2SAS_ADAPTER *ioc, int port, int sleep_flag)
 {
 	Mpi2PortFactsRequest_t mpi_request;
-	Mpi2PortFactsReply_t mpi_reply, *pfacts;
+	Mpi2PortFactsReply_t mpi_reply;
+	struct mpt2sas_port_facts *pfacts;
 	int mpi_reply_sz, mpi_request_sz, r;
 
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
@@ -3139,7 +3142,8 @@ static int
 _base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 {
 	Mpi2IOCFactsRequest_t mpi_request;
-	Mpi2IOCFactsReply_t mpi_reply, *facts;
+	Mpi2IOCFactsReply_t mpi_reply;
+	struct mpt2sas_facts *facts;
 	int mpi_reply_sz, mpi_request_sz, r;
 
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
@@ -3225,17 +3229,6 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 	mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION);
 	mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
 
-	/* In MPI Revision I (0xA), the SystemReplyFrameSize(offset 0x18) was
-	 * removed and made reserved.  For those with older firmware will need
-	 * this fix. It was decided that the Reply and Request frame sizes are
-	 * the same.
-	 */
-	if ((ioc->facts.HeaderVersion >> 8) < 0xA) {
-		mpi_request.Reserved7 = cpu_to_le16(ioc->reply_sz);
-/*		mpi_request.SystemReplyFrameSize =
- *		 cpu_to_le16(ioc->reply_sz);
- */
-	}
 
 	mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4);
 	mpi_request.ReplyDescriptorPostQueueDepth =
@@ -3243,25 +3236,17 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 	mpi_request.ReplyFreeQueueDepth =
 	    cpu_to_le16(ioc->reply_free_queue_depth);
 
-#if BITS_PER_LONG > 32
 	mpi_request.SenseBufferAddressHigh =
-	    cpu_to_le32(ioc->sense_dma >> 32);
+	    cpu_to_le32((u64)ioc->sense_dma >> 32);
 	mpi_request.SystemReplyAddressHigh =
-	    cpu_to_le32(ioc->reply_dma >> 32);
+	    cpu_to_le32((u64)ioc->reply_dma >> 32);
 	mpi_request.SystemRequestFrameBaseAddress =
-	    cpu_to_le64(ioc->request_dma);
+	    cpu_to_le64((u64)ioc->request_dma);
 	mpi_request.ReplyFreeQueueAddress =
-	    cpu_to_le64(ioc->reply_free_dma);
+	    cpu_to_le64((u64)ioc->reply_free_dma);
 	mpi_request.ReplyDescriptorPostQueueAddress =
-	    cpu_to_le64(ioc->reply_post_free_dma);
-#else
-	mpi_request.SystemRequestFrameBaseAddress =
-	    cpu_to_le32(ioc->request_dma);
-	mpi_request.ReplyFreeQueueAddress =
-	    cpu_to_le32(ioc->reply_free_dma);
-	mpi_request.ReplyDescriptorPostQueueAddress =
-	    cpu_to_le32(ioc->reply_post_free_dma);
-#endif
+	    cpu_to_le64((u64)ioc->reply_post_free_dma);
+
 
 	/* This time stamp specifies number of milliseconds
 	 * since epoch ~ midnight January 1, 1970.
@@ -3271,10 +3256,10 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 	    (current_time.tv_usec / 1000));
 
 	if (ioc->logging_level & MPT_DEBUG_INIT) {
-		u32 *mfp;
+		__le32 *mfp;
 		int i;
 
-		mfp = (u32 *)&mpi_request;
+		mfp = (__le32 *)&mpi_request;
 		printk(KERN_INFO "\toffset:data\n");
 		for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++)
 			printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4,
@@ -3759,7 +3744,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 
 	/* initialize Reply Post Free Queue */
 	for (i = 0; i < ioc->reply_post_queue_depth; i++)
-		ioc->reply_post_free[i].Words = ULLONG_MAX;
+		ioc->reply_post_free[i].Words = cpu_to_le64(ULLONG_MAX);
 
 	r = _base_send_ioc_init(ioc, sleep_flag);
 	if (r)

drivers/scsi/mpt2sas/mpt2sas_base.h

@@ -541,6 +541,53 @@ struct _tr_list {
 
 typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
 
+/* IOC Facts and Port Facts converted from little endian to cpu */
+union mpi2_version_union {
+	MPI2_VERSION_STRUCT		Struct;
+	u32				Word;
+};
+
+struct mpt2sas_facts {
+	u16			MsgVersion;
+	u16			HeaderVersion;
+	u8			IOCNumber;
+	u8			VP_ID;
+	u8			VF_ID;
+	u16			IOCExceptions;
+	u16			IOCStatus;
+	u32			IOCLogInfo;
+	u8			MaxChainDepth;
+	u8			WhoInit;
+	u8			NumberOfPorts;
+	u8			MaxMSIxVectors;
+	u16			RequestCredit;
+	u16			ProductID;
+	u32			IOCCapabilities;
+	union mpi2_version_union	FWVersion;
+	u16			IOCRequestFrameSize;
+	u16			Reserved3;
+	u16			MaxInitiators;
+	u16			MaxTargets;
+	u16			MaxSasExpanders;
+	u16			MaxEnclosures;
+	u16			ProtocolFlags;
+	u16			HighPriorityCredit;
+	u16			MaxReplyDescriptorPostQueueDepth;
+	u8			ReplyFrameSize;
+	u8			MaxVolumes;
+	u16			MaxDevHandle;
+	u16			MaxPersistentEntries;
+	u16			MinDevHandle;
+};
+
+struct mpt2sas_port_facts {
+	u8			PortNumber;
+	u8			VP_ID;
+	u8			VF_ID;
+	u8			PortType;
+	u16			MaxPostedCmdBuffers;
+};
+
 /**
  * struct MPT2SAS_ADAPTER - per adapter struct
  * @list: ioc_list
@@ -749,8 +796,8 @@ struct MPT2SAS_ADAPTER {
 	u32		event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
 
 	/* static config pages */
-	Mpi2IOCFactsReply_t facts;
-	Mpi2PortFactsReply_t *pfacts;
+	struct mpt2sas_facts facts;
+	struct mpt2sas_port_facts *pfacts;
 	Mpi2ManufacturingPage0_t manu_pg0;
 	Mpi2BiosPage2_t	bios_pg2;
 	Mpi2BiosPage3_t	bios_pg3;
@@ -840,7 +887,7 @@ struct MPT2SAS_ADAPTER {
 
 	/* reply free queue */
 	u16 		reply_free_queue_depth;
-	u32		*reply_free;
+	__le32		*reply_free;
 	dma_addr_t	reply_free_dma;
 	struct dma_pool *reply_free_dma_pool;
 	u32		reply_free_host_index;

drivers/scsi/mpt2sas/mpt2sas_ctl.c

@@ -2706,13 +2706,13 @@ static DEVICE_ATTR(ioc_reset_count, S_IRUGO,
     _ctl_ioc_reset_count_show, NULL);
 
 struct DIAG_BUFFER_START {
-	u32 Size;
-	u32 DiagVersion;
+	__le32 Size;
+	__le32 DiagVersion;
 	u8 BufferType;
 	u8 Reserved[3];
-	u32 Reserved1;
-	u32 Reserved2;
-	u32 Reserved3;
+	__le32 Reserved1;
+	__le32 Reserved2;
+	__le32 Reserved3;
 };
 /**
  * _ctl_host_trace_buffer_size_show - host buffer size (trace only)

drivers/scsi/mpt2sas/mpt2sas_debug.h

@@ -164,7 +164,7 @@ static inline void
 _debug_dump_mf(void *mpi_request, int sz)
 {
 	int i;
-	u32 *mfp = (u32 *)mpi_request;
+	__le32 *mfp = (__le32 *)mpi_request;
 
 	printk(KERN_INFO "mf:\n\t");
 	for (i = 0; i < sz; i++) {

drivers/scsi/mpt2sas/mpt2sas_scsih.c

@@ -1956,7 +1956,7 @@ _scsih_slave_configure(struct scsi_device *sdev)
 		case MPI2_RAID_VOL_TYPE_RAID1E:
 			qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
 			if (ioc->manu_pg10.OEMIdentifier &&
-			    (ioc->manu_pg10.GenericFlags0 &
+			    (le32_to_cpu(ioc->manu_pg10.GenericFlags0) &
 			    MFG10_GF0_R10_DISPLAY) &&
 			    !(raid_device->num_pds % 2))
 				r_level = "RAID10";
@@ -4598,7 +4598,7 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 	Mpi2SasEnclosurePage0_t enclosure_pg0;
 	u32 ioc_status;
 	u16 parent_handle;
-	__le64 sas_address, sas_address_parent = 0;
+	u64 sas_address, sas_address_parent = 0;
 	int i;
 	unsigned long flags;
 	struct _sas_port *mpt2sas_port = NULL;
@@ -5404,7 +5404,7 @@ _scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc,
 {
 	struct MPT2SAS_TARGET *target_priv_data;
 	struct _sas_device *sas_device;
-	__le64 sas_address;
+	u64 sas_address;
 	unsigned long flags;
 	Mpi2EventDataSasDeviceStatusChange_t *event_data =
 	    fw_event->event_data;
@@ -6566,7 +6566,7 @@ _scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc)
 	Mpi2ExpanderPage0_t expander_pg0;
 	Mpi2ConfigReply_t mpi_reply;
 	u16 ioc_status;
-	__le64 sas_address;
+	u64 sas_address;
 	u16 handle;
 
 	printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
@@ -7505,7 +7505,7 @@ _scsih_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	u32 device_state;
+	pci_power_t device_state;
 
 	mpt2sas_base_stop_watchdog(ioc);
 	scsi_block_requests(shost);
@@ -7532,7 +7532,7 @@ _scsih_resume(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	u32 device_state = pdev->current_state;
+	pci_power_t device_state = pdev->current_state;
 	int r;
 
 	printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, previous "

drivers/scsi/mpt2sas/mpt2sas_transport.c

@@ -299,7 +299,6 @@ _transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
 	void *data_out = NULL;
 	dma_addr_t data_out_dma;
 	u32 sz;
-	u64 *sas_address_le;
 	u16 wait_state_count;
 
 	if (ioc->shost_recovery || ioc->pci_error_recovery) {
@@ -372,8 +371,7 @@ _transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
 	mpi_request->PhysicalPort = 0xFF;
 	mpi_request->VF_ID = 0; /* TODO */
 	mpi_request->VP_ID = 0;
-	sas_address_le = (u64 *)&mpi_request->SASAddress;
-	*sas_address_le = cpu_to_le64(sas_address);
+	mpi_request->SASAddress = cpu_to_le64(sas_address);
 	mpi_request->RequestDataLength =
 	    cpu_to_le16(sizeof(struct rep_manu_request));
 	psge = &mpi_request->SGL;
@@ -1049,14 +1047,14 @@ struct phy_error_log_reply{
 	u8 function; /* 0x11 */
 	u8 function_result;
 	u8 response_length;
-	u16 expander_change_count;
+	__be16 expander_change_count;
 	u8 reserved_1[3];
 	u8 phy_identifier;
 	u8 reserved_2[2];
-	u32 invalid_dword;
-	u32 running_disparity_error;
-	u32 loss_of_dword_sync;
-	u32 phy_reset_problem;
+	__be32 invalid_dword;
+	__be32 running_disparity_error;
+	__be32 loss_of_dword_sync;
+	__be32 phy_reset_problem;
 };
 
 /**
@@ -1085,7 +1083,6 @@ _transport_get_expander_phy_error_log(struct MPT2SAS_ADAPTER *ioc,
 	void *data_out = NULL;
 	dma_addr_t data_out_dma;
 	u32 sz;
-	u64 *sas_address_le;
 	u16 wait_state_count;
 
 	if (ioc->shost_recovery || ioc->pci_error_recovery) {
@@ -1160,8 +1157,7 @@ _transport_get_expander_phy_error_log(struct MPT2SAS_ADAPTER *ioc,
 	mpi_request->PhysicalPort = 0xFF;
 	mpi_request->VF_ID = 0; /* TODO */
 	mpi_request->VP_ID = 0;
-	sas_address_le = (u64 *)&mpi_request->SASAddress;
-	*sas_address_le = cpu_to_le64(phy->identify.sas_address);
+	mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address);
 	mpi_request->RequestDataLength =
 	    cpu_to_le16(sizeof(struct phy_error_log_request));
 	psge = &mpi_request->SGL;
@@ -1406,7 +1402,6 @@ _transport_expander_phy_control(struct MPT2SAS_ADAPTER *ioc,
 	void *data_out = NULL;
 	dma_addr_t data_out_dma;
 	u32 sz;
-	u64 *sas_address_le;
 	u16 wait_state_count;
 
 	if (ioc->shost_recovery) {
@@ -1486,8 +1481,7 @@ _transport_expander_phy_control(struct MPT2SAS_ADAPTER *ioc,
 	mpi_request->PhysicalPort = 0xFF;
 	mpi_request->VF_ID = 0; /* TODO */
 	mpi_request->VP_ID = 0;
-	sas_address_le = (u64 *)&mpi_request->SASAddress;
-	*sas_address_le = cpu_to_le64(phy->identify.sas_address);
+	mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address);
 	mpi_request->RequestDataLength =
 	    cpu_to_le16(sizeof(struct phy_error_log_request));
 	psge = &mpi_request->SGL;
@@ -1914,7 +1908,7 @@ _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	mpi_request->PhysicalPort = 0xFF;
 	mpi_request->VF_ID = 0; /* TODO */
 	mpi_request->VP_ID = 0;
-	*((u64 *)&mpi_request->SASAddress) = (rphy) ?
+	mpi_request->SASAddress = (rphy) ?
 	    cpu_to_le64(rphy->identify.sas_address) :
 	    cpu_to_le64(ioc->sas_hba.sas_address);
 	mpi_request->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4);