Commit c97a4ccc authored by Michael Buesch's avatar Michael Buesch Committed by John W. Linville

b43: Fix beacon BH update

This fixes beacon updating in the bottomhalf.
In case the device is busy, we will defer to later in the IRQ handler.
Signed-off-by: default avatarMichael Buesch <mb@bu3sch.de>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 84363e6e
......@@ -411,7 +411,6 @@ enum {
#define B43_IRQ_ALL 0xFFFFFFFF
#define B43_IRQ_MASKTEMPLATE (B43_IRQ_MAC_SUSPENDED | \
B43_IRQ_BEACON | \
B43_IRQ_TBTT_INDI | \
B43_IRQ_ATIM_END | \
B43_IRQ_PMQ | \
......
......@@ -1448,6 +1448,53 @@ static void b43_write_probe_resp_template(struct b43_wldev *dev,
kfree(probe_resp_data);
}
static void handle_irq_beacon(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
u32 cmd, beacon0_valid, beacon1_valid;
if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
return;
/* This is the bottom half of the asynchronous beacon update. */
/* Ignore interrupt in the future. */
dev->irq_savedstate &= ~B43_IRQ_BEACON;
cmd = b43_read32(dev, B43_MMIO_MACCMD);
beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID);
beacon1_valid = (cmd & B43_MACCMD_BEACON1_VALID);
/* Schedule interrupt manually, if busy. */
if (beacon0_valid && beacon1_valid) {
b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_BEACON);
dev->irq_savedstate |= B43_IRQ_BEACON;
return;
}
if (!beacon0_valid) {
if (!wl->beacon0_uploaded) {
b43_write_beacon_template(dev, 0x68, 0x18,
B43_CCK_RATE_1MB);
b43_write_probe_resp_template(dev, 0x268, 0x4A,
&__b43_ratetable[3]);
wl->beacon0_uploaded = 1;
}
cmd = b43_read32(dev, B43_MMIO_MACCMD);
cmd |= B43_MACCMD_BEACON0_VALID;
b43_write32(dev, B43_MMIO_MACCMD, cmd);
} else if (!beacon1_valid) {
if (!wl->beacon1_uploaded) {
b43_write_beacon_template(dev, 0x468, 0x1A,
B43_CCK_RATE_1MB);
wl->beacon1_uploaded = 1;
}
cmd = b43_read32(dev, B43_MMIO_MACCMD);
cmd |= B43_MACCMD_BEACON1_VALID;
b43_write32(dev, B43_MMIO_MACCMD, cmd);
}
}
static void b43_beacon_update_trigger_work(struct work_struct *work)
{
struct b43_wl *wl = container_of(work, struct b43_wl,
......@@ -1457,13 +1504,14 @@ static void b43_beacon_update_trigger_work(struct work_struct *work)
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
/* Force the microcode to trigger the
* beacon update bottom-half IRQ. */
spin_lock_irq(&wl->irq_lock);
b43_write32(dev, B43_MMIO_MACCMD,
b43_read32(dev, B43_MMIO_MACCMD)
| B43_MACCMD_BEACON0_VALID
| B43_MACCMD_BEACON1_VALID);
/* update beacon right away or defer to irq */
dev->irq_savedstate = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
handle_irq_beacon(dev);
/* The handler might have updated the IRQ mask. */
b43_write32(dev, B43_MMIO_GEN_IRQ_MASK,
dev->irq_savedstate);
mmiowb();
spin_unlock_irq(&wl->irq_lock);
}
mutex_unlock(&wl->mutex);
......@@ -1520,41 +1568,6 @@ static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
b43dbg(dev->wl, "Set beacon interval to %u\n", beacon_int);
}
static void handle_irq_beacon(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
u32 cmd, beacon0_valid, beacon1_valid;
if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
return;
/* This is the bottom half of the asynchronous beacon update. */
cmd = b43_read32(dev, B43_MMIO_MACCMD);
beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID);
beacon1_valid = (cmd & B43_MACCMD_BEACON1_VALID);
cmd &= ~(B43_MACCMD_BEACON0_VALID | B43_MACCMD_BEACON1_VALID);
if (!beacon0_valid) {
if (!wl->beacon0_uploaded) {
b43_write_beacon_template(dev, 0x68, 0x18,
B43_CCK_RATE_1MB);
b43_write_probe_resp_template(dev, 0x268, 0x4A,
&__b43_ratetable[3]);
wl->beacon0_uploaded = 1;
}
cmd |= B43_MACCMD_BEACON0_VALID;
} else if (!beacon1_valid) {
if (!wl->beacon1_uploaded) {
b43_write_beacon_template(dev, 0x468, 0x1A,
B43_CCK_RATE_1MB);
wl->beacon1_uploaded = 1;
}
cmd |= B43_MACCMD_BEACON1_VALID;
}
b43_write32(dev, B43_MMIO_MACCMD, cmd);
}
static void handle_irq_ucode_debug(struct b43_wldev *dev)
{
//TODO
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment