Commit ca4d6cfc authored by Richard Purdie's avatar Richard Purdie Committed by Russell King

[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix

This patch refactors the code in corgi_lcd.c moving it to the board
specific corgi and spitz files where appropriate instead of the
existing ifdef mess which hinders readability.

Fix spitz_get_hsync_len() to call get_hsync_invperiod so pxafb can be
compiled as a module.

The confusing variables which represent the inverse horizintal sync
period are renamed to "invperiod" consistently.

An incorrect comment in corgi_ts.c is also corrected.
Signed-off-by: default avatarRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 2e927b76
......@@ -21,6 +21,7 @@
#include <linux/mmc/host.h>
#include <linux/pm.h>
#include <linux/backlight.h>
#include <video/w100fb.h>
#include <asm/setup.h>
#include <asm/memory.h>
......@@ -140,6 +141,136 @@ struct corgissp_machinfo corgi_ssp_machinfo = {
};
/*
* LCD/Framebuffer
*/
static void w100_lcdtg_suspend(struct w100fb_par *par)
{
corgi_lcdtg_suspend();
}
static void w100_lcdtg_init(struct w100fb_par *par)
{
corgi_lcdtg_hw_init(par->xres);
}
static struct w100_tg_info corgi_lcdtg_info = {
.change = w100_lcdtg_init,
.suspend = w100_lcdtg_suspend,
.resume = w100_lcdtg_init,
};
static struct w100_mem_info corgi_fb_mem = {
.ext_cntl = 0x00040003,
.sdram_mode_reg = 0x00650021,
.ext_timing_cntl = 0x10002a4a,
.io_cntl = 0x7ff87012,
.size = 0x1fffff,
};
static struct w100_gen_regs corgi_fb_regs = {
.lcd_format = 0x00000003,
.lcdd_cntl1 = 0x01CC0000,
.lcdd_cntl2 = 0x0003FFFF,
.genlcd_cntl1 = 0x00FFFF0D,
.genlcd_cntl2 = 0x003F3003,
.genlcd_cntl3 = 0x000102aa,
};
static struct w100_gpio_regs corgi_fb_gpio = {
.init_data1 = 0x000000bf,
.init_data2 = 0x00000000,
.gpio_dir1 = 0x00000000,
.gpio_oe1 = 0x03c0feff,
.gpio_dir2 = 0x00000000,
.gpio_oe2 = 0x00000000,
};
static struct w100_mode corgi_fb_modes[] = {
{
.xres = 480,
.yres = 640,
.left_margin = 0x56,
.right_margin = 0x55,
.upper_margin = 0x03,
.lower_margin = 0x00,
.crtc_ss = 0x82360056,
.crtc_ls = 0xA0280000,
.crtc_gs = 0x80280028,
.crtc_vpos_gs = 0x02830002,
.crtc_rev = 0x00400008,
.crtc_dclk = 0xA0000000,
.crtc_gclk = 0x8015010F,
.crtc_goe = 0x80100110,
.crtc_ps1_active = 0x41060010,
.pll_freq = 75,
.fast_pll_freq = 100,
.sysclk_src = CLK_SRC_PLL,
.sysclk_divider = 0,
.pixclk_src = CLK_SRC_PLL,
.pixclk_divider = 2,
.pixclk_divider_rotated = 6,
},{
.xres = 240,
.yres = 320,
.left_margin = 0x27,
.right_margin = 0x2e,
.upper_margin = 0x01,
.lower_margin = 0x00,
.crtc_ss = 0x81170027,
.crtc_ls = 0xA0140000,
.crtc_gs = 0xC0140014,
.crtc_vpos_gs = 0x00010141,
.crtc_rev = 0x00400008,
.crtc_dclk = 0xA0000000,
.crtc_gclk = 0x8015010F,
.crtc_goe = 0x80100110,
.crtc_ps1_active = 0x41060010,
.pll_freq = 0,
.fast_pll_freq = 0,
.sysclk_src = CLK_SRC_XTAL,
.sysclk_divider = 0,
.pixclk_src = CLK_SRC_XTAL,
.pixclk_divider = 1,
.pixclk_divider_rotated = 1,
},
};
static struct w100fb_mach_info corgi_fb_info = {
.tg = &corgi_lcdtg_info,
.init_mode = INIT_MODE_ROTATED,
.mem = &corgi_fb_mem,
.regs = &corgi_fb_regs,
.modelist = &corgi_fb_modes[0],
.num_modes = 2,
.gpio = &corgi_fb_gpio,
.xtal_freq = 12500000,
.xtal_dbl = 0,
};
static struct resource corgi_fb_resources[] = {
[0] = {
.start = 0x08000000,
.end = 0x08ffffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device corgifb_device = {
.name = "w100fb",
.id = -1,
.num_resources = ARRAY_SIZE(corgi_fb_resources),
.resource = corgi_fb_resources,
.dev = {
.platform_data = &corgi_fb_info,
.parent = &corgissp_device.dev,
},
};
/*
* Corgi Backlight Device
*/
......@@ -154,6 +285,21 @@ static void corgi_bl_kick_battery(void)
}
}
static void corgi_bl_set_intensity(int intensity)
{
if (intensity > 0x10)
intensity += 0x10;
/* Bits 0-4 are accessed via the SSP interface */
corgi_ssp_blduty_set(intensity & 0x1f);
/* Bit 5 is via SCOOP */
if (intensity & 0x0020)
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
else
reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
}
static struct generic_bl_info corgi_bl_machinfo = {
.name = "corgi-bl",
.max_intensity = 0x2f,
......@@ -190,9 +336,40 @@ static struct platform_device corgiled_device = {
.id = -1,
};
/*
* Corgi Touch Screen Device
*/
static unsigned long (*get_hsync_invperiod)(struct device *dev);
static void inline sharpsl_wait_sync(int gpio)
{
while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
}
static unsigned long corgi_get_hsync_invperiod(void)
{
if (!get_hsync_invperiod)
get_hsync_invperiod = symbol_get(w100fb_get_hsynclen);
if (!get_hsync_invperiod)
return 0;
return get_hsync_invperiod(&corgifb_device.dev);
}
static void corgi_put_hsync(void)
{
if (get_hsync_invperiod)
symbol_put(w100fb_get_hsynclen);
get_hsync_invperiod = NULL;
}
static void corgi_wait_hsync(void)
{
sharpsl_wait_sync(CORGI_GPIO_HSYNC);
}
static struct resource corgits_resources[] = {
[0] = {
.start = CORGI_IRQ_GPIO_TP_INT,
......@@ -202,9 +379,9 @@ static struct resource corgits_resources[] = {
};
static struct corgits_machinfo corgi_ts_machinfo = {
.get_hsync_len = corgi_get_hsync_len,
.put_hsync = corgi_put_hsync,
.wait_hsync = corgi_wait_hsync,
.get_hsync_invperiod = corgi_get_hsync_invperiod,
.put_hsync = corgi_put_hsync,
.wait_hsync = corgi_wait_hsync,
};
static struct platform_device corgits_device = {
......
......@@ -173,7 +173,7 @@ static void lcdtg_set_phadadj(int mode)
static int lcd_inited;
static void lcdtg_hw_init(int mode)
void corgi_lcdtg_hw_init(int mode)
{
if (!lcd_inited) {
int comadj;
......@@ -254,7 +254,7 @@ static void lcdtg_hw_init(int mode)
}
}
static void lcdtg_suspend(void)
void corgi_lcdtg_suspend(void)
{
/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
mdelay(34);
......@@ -288,298 +288,3 @@ static void lcdtg_suspend(void)
lcd_inited = 0;
}
/*
* Corgi w100 Frame Buffer Device
*/
#ifdef CONFIG_PXA_SHARP_C7xx
#include <video/w100fb.h>
static void w100_lcdtg_suspend(struct w100fb_par *par)
{
lcdtg_suspend();
}
static void w100_lcdtg_init(struct w100fb_par *par)
{
lcdtg_hw_init(par->xres);
}
static struct w100_tg_info corgi_lcdtg_info = {
.change = w100_lcdtg_init,
.suspend = w100_lcdtg_suspend,
.resume = w100_lcdtg_init,
};
static struct w100_mem_info corgi_fb_mem = {
.ext_cntl = 0x00040003,
.sdram_mode_reg = 0x00650021,
.ext_timing_cntl = 0x10002a4a,
.io_cntl = 0x7ff87012,
.size = 0x1fffff,
};
static struct w100_gen_regs corgi_fb_regs = {
.lcd_format = 0x00000003,
.lcdd_cntl1 = 0x01CC0000,
.lcdd_cntl2 = 0x0003FFFF,
.genlcd_cntl1 = 0x00FFFF0D,
.genlcd_cntl2 = 0x003F3003,
.genlcd_cntl3 = 0x000102aa,
};
static struct w100_gpio_regs corgi_fb_gpio = {
.init_data1 = 0x000000bf,
.init_data2 = 0x00000000,
.gpio_dir1 = 0x00000000,
.gpio_oe1 = 0x03c0feff,
.gpio_dir2 = 0x00000000,
.gpio_oe2 = 0x00000000,
};
static struct w100_mode corgi_fb_modes[] = {
{
.xres = 480,
.yres = 640,
.left_margin = 0x56,
.right_margin = 0x55,
.upper_margin = 0x03,
.lower_margin = 0x00,
.crtc_ss = 0x82360056,
.crtc_ls = 0xA0280000,
.crtc_gs = 0x80280028,
.crtc_vpos_gs = 0x02830002,
.crtc_rev = 0x00400008,
.crtc_dclk = 0xA0000000,
.crtc_gclk = 0x8015010F,
.crtc_goe = 0x80100110,
.crtc_ps1_active = 0x41060010,
.pll_freq = 75,
.fast_pll_freq = 100,
.sysclk_src = CLK_SRC_PLL,
.sysclk_divider = 0,
.pixclk_src = CLK_SRC_PLL,
.pixclk_divider = 2,
.pixclk_divider_rotated = 6,
},{
.xres = 240,
.yres = 320,
.left_margin = 0x27,
.right_margin = 0x2e,
.upper_margin = 0x01,
.lower_margin = 0x00,
.crtc_ss = 0x81170027,
.crtc_ls = 0xA0140000,
.crtc_gs = 0xC0140014,
.crtc_vpos_gs = 0x00010141,
.crtc_rev = 0x00400008,
.crtc_dclk = 0xA0000000,
.crtc_gclk = 0x8015010F,
.crtc_goe = 0x80100110,
.crtc_ps1_active = 0x41060010,
.pll_freq = 0,
.fast_pll_freq = 0,
.sysclk_src = CLK_SRC_XTAL,
.sysclk_divider = 0,
.pixclk_src = CLK_SRC_XTAL,
.pixclk_divider = 1,
.pixclk_divider_rotated = 1,
},
};
static struct w100fb_mach_info corgi_fb_info = {
.tg = &corgi_lcdtg_info,
.init_mode = INIT_MODE_ROTATED,
.mem = &corgi_fb_mem,
.regs = &corgi_fb_regs,
.modelist = &corgi_fb_modes[0],
.num_modes = 2,
.gpio = &corgi_fb_gpio,
.xtal_freq = 12500000,
.xtal_dbl = 0,
};
static struct resource corgi_fb_resources[] = {
[0] = {
.start = 0x08000000,
.end = 0x08ffffff,
.flags = IORESOURCE_MEM,
},
};
struct platform_device corgifb_device = {
.name = "w100fb",
.id = -1,
.num_resources = ARRAY_SIZE(corgi_fb_resources),
.resource = corgi_fb_resources,
.dev = {
.platform_data = &corgi_fb_info,
.parent = &corgissp_device.dev,
},
};
#endif
/*
* Spitz PXA Frame Buffer Device
*/
#ifdef CONFIG_PXA_SHARP_Cxx00
#include <asm/arch/pxafb.h>
void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
{
if (on)
lcdtg_hw_init(var->xres);
else
lcdtg_suspend();
}
#endif
/*
* Corgi/Spitz Touchscreen to LCD interface
*/
static unsigned long (*get_hsync_time)(struct device *dev);
static void inline sharpsl_wait_sync(int gpio)
{
while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
}
#ifdef CONFIG_PXA_SHARP_C7xx
unsigned long corgi_get_hsync_len(void)
{
if (!get_hsync_time)
get_hsync_time = symbol_get(w100fb_get_hsynclen);
if (!get_hsync_time)
return 0;
return get_hsync_time(&corgifb_device.dev);
}
void corgi_put_hsync(void)
{
if (get_hsync_time)
symbol_put(w100fb_get_hsynclen);
get_hsync_time = NULL;
}
void corgi_wait_hsync(void)
{
sharpsl_wait_sync(CORGI_GPIO_HSYNC);
}
#endif
#ifdef CONFIG_PXA_SHARP_Cxx00
static struct device *spitz_pxafb_dev;
static int is_pxafb_device(struct device * dev, void * data)
{
struct platform_device *pdev = container_of(dev, struct platform_device, dev);
return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
}
unsigned long spitz_get_hsync_len(void)
{
#ifdef CONFIG_FB_PXA
if (!spitz_pxafb_dev) {
spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
if (!spitz_pxafb_dev)
return 0;
}
if (!get_hsync_time)
get_hsync_time = symbol_get(pxafb_get_hsync_time);
if (!get_hsync_time)
#endif
return 0;
return pxafb_get_hsync_time(spitz_pxafb_dev);
}
void spitz_put_hsync(void)
{
put_device(spitz_pxafb_dev);
if (get_hsync_time)
symbol_put(pxafb_get_hsync_time);
spitz_pxafb_dev = NULL;
get_hsync_time = NULL;
}
void spitz_wait_hsync(void)
{
sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
}
#endif
/*
* Corgi/Spitz Backlight Power
*/
#ifdef CONFIG_PXA_SHARP_C7xx
void corgi_bl_set_intensity(int intensity)
{
if (intensity > 0x10)
intensity += 0x10;
/* Bits 0-4 are accessed via the SSP interface */
corgi_ssp_blduty_set(intensity & 0x1f);
/* Bit 5 is via SCOOP */
if (intensity & 0x0020)
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
else
reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
}
#endif
#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
void spitz_bl_set_intensity(int intensity)
{
if (intensity > 0x10)
intensity += 0x10;
/* Bits 0-4 are accessed via the SSP interface */
corgi_ssp_blduty_set(intensity & 0x1f);
/* Bit 5 is via SCOOP */
if (intensity & 0x0020)
reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
else
set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
if (intensity)
set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
else
reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
}
#endif
#ifdef CONFIG_MACH_AKITA
void akita_bl_set_intensity(int intensity)
{
if (intensity > 0x10)
intensity += 0x10;
/* Bits 0-4 are accessed via the SSP interface */
corgi_ssp_blduty_set(intensity & 0x1f);
/* Bit 5 is via IO-Expander */
if (intensity & 0x0020)
akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
else
akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
if (intensity)
akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
else
akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
}
#endif
......@@ -26,28 +26,15 @@ void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo);
/*
* SharpSL Backlight
* SharpSL/Corgi LCD Driver
*/
void corgi_bl_set_intensity(int intensity);
void spitz_bl_set_intensity(int intensity);
void akita_bl_set_intensity(int intensity);
/*
* SharpSL Touchscreen Driver
*/
unsigned long corgi_get_hsync_len(void);
unsigned long spitz_get_hsync_len(void);
void corgi_put_hsync(void);
void spitz_put_hsync(void);
void corgi_wait_hsync(void);
void spitz_wait_hsync(void);
void corgi_lcdtg_suspend(void);
void corgi_lcdtg_hw_init(int mode);
/*
* SharpSL Battery/PM Driver
*/
#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x))
/* MAX1111 Channel Definitions */
......
......@@ -271,6 +271,55 @@ static struct platform_device spitzled_device = {
/*
* Spitz Touch Screen Device
*/
static unsigned long (*get_hsync_invperiod)(struct device *dev);
static void inline sharpsl_wait_sync(int gpio)
{
while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
}
static struct device *spitz_pxafb_dev;
static int is_pxafb_device(struct device * dev, void * data)
{
struct platform_device *pdev = container_of(dev, struct platform_device, dev);
return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
}
static unsigned long spitz_get_hsync_invperiod(void)
{
#ifdef CONFIG_FB_PXA
if (!spitz_pxafb_dev) {
spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
if (!spitz_pxafb_dev)
return 0;
}
if (!get_hsync_invperiod)
get_hsync_invperiod = symbol_get(pxafb_get_hsync_time);
if (!get_hsync_invperiod)
#endif
return 0;
return get_hsync_invperiod(spitz_pxafb_dev);
}
static void spitz_put_hsync(void)
{
put_device(spitz_pxafb_dev);
if (get_hsync_invperiod)
symbol_put(pxafb_get_hsync_time);
spitz_pxafb_dev = NULL;
get_hsync_invperiod = NULL;
}
static void spitz_wait_hsync(void)
{
sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
}
static struct resource spitzts_resources[] = {
[0] = {
.start = SPITZ_IRQ_GPIO_TP_INT,
......@@ -280,9 +329,9 @@ static struct resource spitzts_resources[] = {
};
static struct corgits_machinfo spitz_ts_machinfo = {
.get_hsync_len = spitz_get_hsync_len,
.put_hsync = spitz_put_hsync,
.wait_hsync = spitz_wait_hsync,
.get_hsync_invperiod = spitz_get_hsync_invperiod,
.put_hsync = spitz_put_hsync,
.wait_hsync = spitz_wait_hsync,
};
static struct platform_device spitzts_device = {
......@@ -423,6 +472,14 @@ static struct pxaficp_platform_data spitz_ficp_platform_data = {
* Spitz PXA Framebuffer
*/
static void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
{
if (on)
corgi_lcdtg_hw_init(var->xres);
else
corgi_lcdtg_suspend();
}
static struct pxafb_mode_info spitz_pxafb_modes[] = {
{
.pixclock = 19231,
......@@ -520,6 +577,27 @@ static void __init common_init(void)
set_pxa_fb_info(&spitz_pxafb_info);
}
#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
static void spitz_bl_set_intensity(int intensity)
{
if (intensity > 0x10)
intensity += 0x10;
/* Bits 0-4 are accessed via the SSP interface */
corgi_ssp_blduty_set(intensity & 0x1f);
/* Bit 5 is via SCOOP */
if (intensity & 0x0020)
reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
else
set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
if (intensity)
set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
else
reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
}
static void __init spitz_init(void)
{
platform_scoop_config = &spitz_pcmcia_config;
......@@ -530,6 +608,7 @@ static void __init spitz_init(void)
platform_device_register(&spitzscoop2_device);
}
#endif
#ifdef CONFIG_MACH_AKITA
/*
......@@ -542,6 +621,26 @@ struct platform_device akitaioexp_device = {
EXPORT_SYMBOL_GPL(akitaioexp_device);
static void akita_bl_set_intensity(int intensity)
{
if (intensity > 0x10)
intensity += 0x10;
/* Bits 0-4 are accessed via the SSP interface */
corgi_ssp_blduty_set(intensity & 0x1f);
/* Bit 5 is via IO-Expander */
if (intensity & 0x0020)
akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
else
akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
if (intensity)
akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
else
akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
}
static void __init akita_init(void)
{
spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode;
......@@ -558,7 +657,6 @@ static void __init akita_init(void)
}
#endif
static void __init fixup_spitz(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
......
......@@ -74,10 +74,10 @@ extern unsigned int get_clk_frequency_khz(int info);
static unsigned long calc_waittime(struct corgi_ts *corgi_ts)
{
unsigned long hsync_len = corgi_ts->machinfo->get_hsync_len();
unsigned long hsync_invperiod = corgi_ts->machinfo->get_hsync_invperiod();
if (hsync_len)
return get_clk_frequency_khz(0)*1000/hsync_len;
if (hsync_invperiod)
return get_clk_frequency_khz(0)*1000/hsync_invperiod;
else
return 0;
}
......@@ -114,7 +114,7 @@ static int sync_receive_data_send_cmd(struct corgi_ts *corgi_ts, int doRecive, i
if (timer2-timer1 > wait_time) {
/* too slow - timeout, try again */
corgi_ts->machinfo->wait_hsync();
/* get OSCR */
/* get CCNT */
CCNT(timer1);
/* Wait after HSync */
CCNT(timer2);
......
......@@ -104,7 +104,6 @@
*/
extern struct platform_device corgiscoop_device;
extern struct platform_device corgissp_device;
extern struct platform_device corgifb_device;
#endif /* __ASM_ARCH_CORGI_H */
......@@ -16,7 +16,7 @@ int corgi_ssp_max1111_get(unsigned long data);
*/
struct corgits_machinfo {
unsigned long (*get_hsync_len)(void);
unsigned long (*get_hsync_invperiod)(void);
void (*put_hsync)(void);
void (*wait_hsync)(void);
};
......
......@@ -156,5 +156,3 @@ extern struct platform_device spitzscoop_device;
extern struct platform_device spitzscoop2_device;
extern struct platform_device spitzssp_device;
extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
extern void spitz_lcd_power(int on, struct fb_var_screeninfo *var);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment