Merge tag 'regulator-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "Not much going on with regulator this cycle, even in terms of cleanups
  and fixes things were fairly quiet.

   - New helper for setting ramp delay

   - Conversion of the Qualcomm RPMH bindings to YAML

   - Support for Tang Cheng TCS4525"

* tag 'regulator-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (26 commits)
  regulator: Add binding for TCS4525
  regulator: fan53555: Add TCS4525 DCDC support
  dt-bindings: vendor-prefixes: Add Tang Cheng (TCS)
  regulator: core: Fix off_on_delay handling
  regulator: core: Respect off_on_delay at startup
  regulator: core.c: Improve a comment
  regulator: Avoid a double 'of_node_get' in 'regulator_of_get_init_node()'
  regulator: core.c: Fix indentation of comment
  regulator: s2mps11: Drop initialization via platform data
  regulator: s2mpa01: Drop initialization via platform data
  regulator: da9121: automotive variants identity fix
  regulator: Add regmap helper for ramp-delay setting
  regulator: helpers: Export helper voltage listing
  regulator: Add compatibles for PM7325/PMR735A
  regulator: Convert RPMh regulator bindings to YAML
  regulator: qcom-rpmh: Add PM7325/PMR735A regulator support
  regulator: qcom-rpmh: Add pmic5_ftsmps520 buck
  regulator: mt6360: remove redundant error print
  regulator: bd9576: Fix return from bd957x_probe()
  regulator: add missing call to of_node_put()
  ...

Documentation/devicetree/bindings/regulator/fan53555.txt

 Binding for Fairchild FAN53555 regulators
 
 Required properties:
-  - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827" or
-		"silergy,syr828"
+  - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827",
+		"silergy,syr828" or "tcs,tcs4525".
   - reg: I2C address
 
 Optional properties:

Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt

-Qualcomm Technologies, Inc. RPMh Regulators
-
-rpmh-regulator devices support PMIC regulator management via the Voltage
-Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators.  The APPS
-processor communicates with these hardware blocks via a Resource State
-Coordinator (RSC) using command packets.  The VRM allows changing three
-parameters for a given regulator: enable state, output voltage, and operating
-mode.  The XOB allows changing only a single parameter for a given regulator:
-its enable state.  Despite its name, the XOB is capable of controlling the
-enable state of any PMIC peripheral.  It is used for clock buffers, low-voltage
-switches, and LDO/SMPS regulators which have a fixed voltage and mode.
-
-=======================
-Required Node Structure
-=======================
-
-RPMh regulators must be described in two levels of device nodes.  The first
-level describes the PMIC containing the regulators and must reside within an
-RPMh device node.  The second level describes each regulator within the PMIC
-which is to be used on the board.  Each of these regulators maps to a single
-RPMh resource.
-
-The names used for regulator nodes must match those supported by a given PMIC.
-Supported regulator node names:
-	PM8005:		smps1 - smps4
-	PM8009:		smps1 - smps2, ldo1 - ldo7
-	PM8150:		smps1 - smps10, ldo1 - ldo18
-	PM8150L:	smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
-	PM8350:		smps1 - smps12, ldo1 - ldo10,
-	PM8350C:	smps1 - smps10, ldo1 - ldo13, bob
-	PM8998:		smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
-	PMI8998:	bob
-	PM6150:         smps1 - smps5, ldo1 - ldo19
-	PM6150L:        smps1 - smps8, ldo1 - ldo11, bob
-	PMX55:		smps1 - smps7, ldo1 - ldo16
-
-========================
-First Level Nodes - PMIC
-========================
-
-- compatible
-	Usage:      required
-	Value type: <string>
-	Definition: Must be one of below:
-		    "qcom,pm8005-rpmh-regulators"
-		    "qcom,pm8009-rpmh-regulators"
-		    "qcom,pm8009-1-rpmh-regulators"
-		    "qcom,pm8150-rpmh-regulators"
-		    "qcom,pm8150l-rpmh-regulators"
-		    "qcom,pm8350-rpmh-regulators"
-		    "qcom,pm8350c-rpmh-regulators"
-		    "qcom,pm8998-rpmh-regulators"
-		    "qcom,pmc8180-rpmh-regulators"
-		    "qcom,pmc8180c-rpmh-regulators"
-		    "qcom,pmi8998-rpmh-regulators"
-		    "qcom,pm6150-rpmh-regulators"
-		    "qcom,pm6150l-rpmh-regulators"
-		    "qcom,pmx55-rpmh-regulators"
-
-- qcom,pmic-id
-	Usage:      required
-	Value type: <string>
-	Definition: RPMh resource name suffix used for the regulators found on
-		    this PMIC.  Typical values: "a", "b", "c", "d", "e", "f".
-
-- vdd-s1-supply
-- vdd-s2-supply
-- vdd-s3-supply
-- vdd-s4-supply
-	Usage:      optional (PM8998 and PM8005 only)
-	Value type: <phandle>
-	Definition: phandle of the parent supply regulator of one or more of the
-		    regulators for this PMIC.
-
-- vdd-s5-supply
-- vdd-s6-supply
-- vdd-s7-supply
-- vdd-s8-supply
-- vdd-s9-supply
-- vdd-s10-supply
-- vdd-s11-supply
-- vdd-s12-supply
-- vdd-s13-supply
-- vdd-l1-l27-supply
-- vdd-l2-l8-l17-supply
-- vdd-l3-l11-supply
-- vdd-l4-l5-supply
-- vdd-l6-supply
-- vdd-l7-l12-l14-l15-supply
-- vdd-l9-supply
-- vdd-l10-l23-l25-supply
-- vdd-l13-l19-l21-supply
-- vdd-l16-l28-supply
-- vdd-l18-l22-supply
-- vdd-l20-l24-supply
-- vdd-l26-supply
-- vin-lvs-1-2-supply
-	Usage:      optional (PM8998 only)
-	Value type: <phandle>
-	Definition: phandle of the parent supply regulator of one or more of the
-		    regulators for this PMIC.
-
-- vdd-bob-supply
-	Usage:      optional (PMI8998 only)
-	Value type: <phandle>
-	Definition: BOB regulator parent supply phandle
-
-===============================
-Second Level Nodes - Regulators
-===============================
-
-- qcom,always-wait-for-ack
-	Usage:      optional
-	Value type: <empty>
-	Definition: Boolean flag which indicates that the application processor
-		    must wait for an ACK or a NACK from RPMh for every request
-		    sent for this regulator including those which are for a
-		    strictly lower power state.
-
-Other properties defined in Documentation/devicetree/bindings/regulator/regulator.txt
-may also be used.  regulator-initial-mode and regulator-allowed-modes may be
-specified for VRM regulators using mode values from
-include/dt-bindings/regulator/qcom,rpmh-regulator.h.  regulator-allow-bypass
-may be specified for BOB type regulators managed via VRM.
-regulator-allow-set-load may be specified for LDO type regulators managed via
-VRM.
-
-========
-Examples
-========
-
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
-&apps_rsc {
-	pm8998-rpmh-regulators {
-		compatible = "qcom,pm8998-rpmh-regulators";
-		qcom,pmic-id = "a";
-
-		vdd-l7-l12-l14-l15-supply = <&pm8998_s5>;
-
-		smps2 {
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-		};
-
-		pm8998_s5: smps5 {
-			regulator-min-microvolt = <1904000>;
-			regulator-max-microvolt = <2040000>;
-		};
-
-		ldo7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allowed-modes =
-				<RPMH_REGULATOR_MODE_LPM
-				 RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-		};
-
-		lvs1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-	};
-
-	pmi8998-rpmh-regulators {
-		compatible = "qcom,pmi8998-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		bob {
-			regulator-min-microvolt = <3312000>;
-			regulator-max-microvolt = <3600000>;
-			regulator-allowed-modes =
-				<RPMH_REGULATOR_MODE_AUTO
-				 RPMH_REGULATOR_MODE_HPM>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
-		};
-	};
-};

Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,rpmh-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. RPMh Regulators
+
+maintainers:
+  - David Collins <collinsd@codeaurora.org>
+
+description: |
+    rpmh-regulator devices support PMIC regulator management via the Voltage
+    Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators.
+    The APPS processor communicates with these hardware blocks via a
+    Resource State Coordinator (RSC) using command packets.  The VRM allows
+    changing three parameters for a given regulator, enable state, output
+    voltage, and operating mode.  The XOB allows changing only a single
+    parameter for a given regulator, its enable state.  Despite its name,
+    the XOB is capable of controlling the enable state of any PMIC peripheral.
+    It is used for clock buffers, low-voltage switches, and LDO/SMPS regulators
+    which have a fixed voltage and mode.
+
+    =======================
+    Required Node Structure
+    =======================
+
+    RPMh regulators must be described in two levels of device nodes.  The first
+    level describes the PMIC containing the regulators and must reside within an
+    RPMh device node.  The second level describes each regulator within the PMIC
+    which is to be used on the board.  Each of these regulators maps to a single
+    RPMh resource.
+
+    The names used for regulator nodes must match those supported by a given
+    PMIC. Supported regulator node names are
+      For PM8005, smps1 - smps4
+      For PM8009, smps1 - smps2, ldo1 - ldo7
+      For PM8150, smps1 - smps10, ldo1 - ldo18
+      For PM8150L, smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
+      For PM8350, smps1 - smps12, ldo1 - ldo10
+      For PM8350C, smps1 - smps10, ldo1 - ldo13, bob
+      For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
+      For PMI8998, bob
+      For PM6150, smps1 - smps5, ldo1 - ldo19
+      For PM6150L, smps1 - smps8, ldo1 - ldo11, bob
+      For PMX55, smps1 - smps7, ldo1 - ldo16
+      For PM7325, smps1 - smps8, ldo1 - ldo19
+      For PMR735A, smps1 - smps3, ldo1 - ldo7
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8005-rpmh-regulators
+      - qcom,pm8009-rpmh-regulators
+      - qcom,pm8009-1-rpmh-regulators
+      - qcom,pm8150-rpmh-regulators
+      - qcom,pm8150l-rpmh-regulators
+      - qcom,pm8350-rpmh-regulators
+      - qcom,pm8350c-rpmh-regulators
+      - qcom,pm8998-rpmh-regulators
+      - qcom,pmi8998-rpmh-regulators
+      - qcom,pm6150-rpmh-regulators
+      - qcom,pm6150l-rpmh-regulators
+      - qcom,pmx55-rpmh-regulators
+      - qcom,pm7325-rpmh-regulators
+      - qcom,pmr735a-rpmh-regulators
+
+  qcom,pmic-id:
+    description: |
+        RPMh resource name suffix used for the regulators found
+        on this PMIC.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [a, b, c, d, e, f]
+
+  qcom,always-wait-for-ack:
+    description: |
+        Boolean flag which indicates that the application processor
+        must wait for an ACK or a NACK from RPMh for every request
+        sent for this regulator including those which are for a
+        strictly lower power state.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  vdd-flash-supply:
+    description: Input supply phandle of flash.
+
+  vdd-rgb-supply:
+    description: Input supply phandle of rgb.
+
+  vin-lvs-1-2-supply:
+    description: Input supply phandle of one or more regulators.
+
+  vdd-bob-supply:
+    description: BOB regulator parent supply phandle.
+
+  bob:
+    type: object
+    $ref: "regulator.yaml#"
+    description: BOB regulator node.
+
+patternProperties:
+  "^vdd-s([0-9]+)-supply$":
+    description: Input supply phandle(s) of one or more regulators.
+
+  "^vdd-(l[0-9]+[-]){1,5}supply$":
+    description: Input supply phandle(s) of one or more regulators.
+
+  "^(smps|ldo|lvs)[0-9]+$":
+    type: object
+    $ref: "regulator.yaml#"
+    description: smps/ldo regulator nodes(s).
+
+additionalProperties: false
+
+required:
+  - compatible
+  - qcom,pmic-id
+
+examples:
+  - |
+    #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+    pm8998-rpmh-regulators {
+        compatible = "qcom,pm8998-rpmh-regulators";
+        qcom,pmic-id = "a";
+
+        vdd-l7-l12-l14-l15-supply = <&pm8998_s5>;
+
+        smps2 {
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1100000>;
+        };
+
+        ldo7 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+            regulator-allowed-modes =
+                <RPMH_REGULATOR_MODE_LPM
+                 RPMH_REGULATOR_MODE_HPM>;
+            regulator-allow-set-load;
+        };
+
+        lvs1 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+        };
+    };
+
+    pmi8998-rpmh-regulators {
+        compatible = "qcom,pmi8998-rpmh-regulators";
+        qcom,pmic-id = "b";
+
+        bob {
+            regulator-min-microvolt = <3312000>;
+            regulator-max-microvolt = <3600000>;
+            regulator-allowed-modes =
+                <RPMH_REGULATOR_MODE_AUTO
+                 RPMH_REGULATOR_MODE_HPM>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+        };
+    };
+...

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -1113,6 +1113,8 @@ patternProperties:
     description: Trusted Computing Group
   "^tcl,.*":
     description: Toby Churchill Ltd.
+  "^tcs,.*":
+    description: Shenzhen City Tang Cheng Technology Co., Ltd.
   "^tdo,.*":
     description: Shangai Top Display Optoelectronics Co., Ltd
   "^technexion,.*":

drivers/regulator/bd9576-regulator.c

@@ -206,7 +206,7 @@ static int bd957x_probe(struct platform_device *pdev)
 {
 	struct regmap *regmap;
 	struct regulator_config config = { 0 };
-	int i, err;
+	int i;
 	bool vout_mode, ddr_sel;
 	const struct bd957x_regulator_data *reg_data = &bd9576_regulators[0];
 	unsigned int num_reg_data = ARRAY_SIZE(bd9576_regulators);
@@ -279,8 +279,7 @@ static int bd957x_probe(struct platform_device *pdev)
 		break;
 	default:
 		dev_err(&pdev->dev, "Unsupported chip type\n");
-		err = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	config.dev = pdev->dev.parent;
@@ -300,8 +299,7 @@ static int bd957x_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev,
 				"failed to register %s regulator\n",
 				desc->name);
-			err = PTR_ERR(rdev);
-			goto err;
+			return PTR_ERR(rdev);
 		}
 		/*
 		 * Clear the VOUT1 GPIO setting - rest of the regulators do not
@@ -310,8 +308,7 @@ static int bd957x_probe(struct platform_device *pdev)
 		config.ena_gpiod = NULL;
 	}
 
-err:
-	return err;
+	return 0;
 }
 
 static const struct platform_device_id bd957x_pmic_id[] = {

drivers/regulator/core.c

@@ -538,7 +538,8 @@ static int regulator_mode_constrain(struct regulator_dev *rdev,
 
 	/* The modes are bitmasks, the most power hungry modes having
 	 * the lowest values. If the requested mode isn't supported
-	 * try higher modes. */
+	 * try higher modes.
+	 */
 	while (*mode) {
 		if (rdev->constraints->valid_modes_mask & *mode)
 			return 0;
@@ -931,7 +932,8 @@ static DEVICE_ATTR(bypass, 0444,
 		   regulator_bypass_show, NULL);
 
 /* Calculate the new optimum regulator operating mode based on the new total
- * consumer load. All locks held by caller */
+ * consumer load. All locks held by caller
+ */
 static int drms_uA_update(struct regulator_dev *rdev)
 {
 	struct regulator *sibling;
@@ -1219,7 +1221,8 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
 		int	cmax = constraints->max_uV;
 
 		/* it's safe to autoconfigure fixed-voltage supplies
-		   and the constraints are used by list_voltage. */
+		 * and the constraints are used by list_voltage.
+		 */
 		if (count == 1 && !cmin) {
 			cmin = 1;
 			cmax = INT_MAX;
@@ -1439,6 +1442,8 @@ static int set_machine_constraints(struct regulator_dev *rdev)
 
 		if (rdev->constraints->always_on)
 			rdev->use_count++;
+	} else if (rdev->desc->off_on_delay) {
+		rdev->last_off = ktime_get();
 	}
 
 	print_constraints(rdev);
@@ -2483,29 +2488,15 @@ static int _regulator_do_enable(struct regulator_dev *rdev)
 
 	trace_regulator_enable(rdev_get_name(rdev));
 
-	if (rdev->desc->off_on_delay) {
+	if (rdev->desc->off_on_delay && rdev->last_off) {
 		/* if needed, keep a distance of off_on_delay from last time
 		 * this regulator was disabled.
 		 */
-		unsigned long start_jiffy = jiffies;
-		unsigned long intended, max_delay, remaining;
-
-		max_delay = usecs_to_jiffies(rdev->desc->off_on_delay);
-		intended = rdev->last_off_jiffy + max_delay;
-
-		if (time_before(start_jiffy, intended)) {
-			/* calc remaining jiffies to deal with one-time
-			 * timer wrapping.
-			 * in case of multiple timer wrapping, either it can be
-			 * detected by out-of-range remaining, or it cannot be
-			 * detected and we get a penalty of
-			 * _regulator_enable_delay().
-			 */
-			remaining = intended - start_jiffy;
-			if (remaining <= max_delay)
-				_regulator_enable_delay(
-						jiffies_to_usecs(remaining));
-		}
+		ktime_t end = ktime_add_us(rdev->last_off, rdev->desc->off_on_delay);
+		s64 remaining = ktime_us_delta(end, ktime_get());
+
+		if (remaining > 0)
+			_regulator_enable_delay(remaining);
 	}
 
 	if (rdev->ena_pin) {
@@ -2525,7 +2516,8 @@ static int _regulator_do_enable(struct regulator_dev *rdev)
 
 	/* Allow the regulator to ramp; it would be useful to extend
 	 * this for bulk operations so that the regulators can ramp
-	 * together.  */
+	 * together.
+	 */
 	trace_regulator_enable_delay(rdev_get_name(rdev));
 
 	/* If poll_enabled_time is set, poll upto the delay calculated
@@ -2650,7 +2642,10 @@ static int _regulator_enable(struct regulator *regulator)
 		goto err_disable_supply;
 
 	if (rdev->use_count == 0) {
-		/* The regulator may on if it's not switchable or left on */
+		/*
+		 * The regulator may already be enabled if it's not switchable
+		 * or was left on
+		 */
 		ret = _regulator_is_enabled(rdev);
 		if (ret == -EINVAL || ret == 0) {
 			if (!regulator_ops_is_valid(rdev,
@@ -2731,11 +2726,8 @@ static int _regulator_do_disable(struct regulator_dev *rdev)
 			return ret;
 	}
 
-	/* cares about last_off_jiffy only if off_on_delay is required by
-	 * device.
-	 */
 	if (rdev->desc->off_on_delay)
-		rdev->last_off_jiffy = jiffies;
+		rdev->last_off = ktime_get();
 
 	trace_regulator_disable_complete(rdev_get_name(rdev));
 
@@ -5337,10 +5329,12 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	ret = set_machine_constraints(rdev);
 	if (ret == -EPROBE_DEFER) {
 		/* Regulator might be in bypass mode and so needs its supply
-		 * to set the constraints */
+		 * to set the constraints
+		 */
 		/* FIXME: this currently triggers a chicken-and-egg problem
 		 * when creating -SUPPLY symlink in sysfs to a regulator
-		 * that is just being created */
+		 * that is just being created
+		 */
 		rdev_dbg(rdev, "will resolve supply early: %s\n",
 			 rdev->supply_name);
 		ret = regulator_resolve_supply(rdev);
@@ -5899,7 +5893,8 @@ static int regulator_late_cleanup(struct device *dev, void *data)
 
 	if (have_full_constraints()) {
 		/* We log since this may kill the system if it goes
-		 * wrong. */
+		 * wrong.
+		 */
 		rdev_info(rdev, "disabling\n");
 		ret = _regulator_do_disable(rdev);
 		if (ret != 0)

drivers/regulator/da9121-regulator.c

@@ -40,6 +40,7 @@ struct da9121 {
 	unsigned int passive_delay;
 	int chip_irq;
 	int variant_id;
+	int subvariant_id;
 };
 
 /* Define ranges for different variants, enabling translation to/from
@@ -812,7 +813,6 @@ static struct regmap_config da9121_2ch_regmap_config = {
 static int da9121_check_device_type(struct i2c_client *i2c, struct da9121 *chip)
 {
 	u32 device_id;
-	u8 chip_id = chip->variant_id;
 	u32 variant_id;
 	u8 variant_mrc, variant_vrc;
 	char *type;
@@ -839,22 +839,34 @@ static int da9121_check_device_type(struct i2c_client *i2c, struct da9121 *chip)
 
 	variant_vrc = variant_id & DA9121_MASK_OTP_VARIANT_ID_VRC;
 
-	switch (variant_vrc) {
-	case DA9121_VARIANT_VRC:
-		type = "DA9121/DA9130";
-		config_match = (chip_id == DA9121_TYPE_DA9121_DA9130);
+	switch (chip->subvariant_id) {
+	case DA9121_SUBTYPE_DA9121:
+		type = "DA9121";
+		config_match = (variant_vrc == DA9121_VARIANT_VRC);
 		break;
-	case DA9220_VARIANT_VRC:
-		type = "DA9220/DA9132";
-		config_match = (chip_id == DA9121_TYPE_DA9220_DA9132);
+	case DA9121_SUBTYPE_DA9130:
+		type = "DA9130";
+		config_match = (variant_vrc == DA9130_VARIANT_VRC);
 		break;
-	case DA9122_VARIANT_VRC:
-		type = "DA9122/DA9131";
-		config_match = (chip_id == DA9121_TYPE_DA9122_DA9131);
+	case DA9121_SUBTYPE_DA9220:
+		type = "DA9220";
+		config_match = (variant_vrc == DA9220_VARIANT_VRC);
 		break;
-	case DA9217_VARIANT_VRC:
+	case DA9121_SUBTYPE_DA9132:
+		type = "DA9132";
+		config_match = (variant_vrc == DA9132_VARIANT_VRC);
+		break;
+	case DA9121_SUBTYPE_DA9122:
+		type = "DA9122";
+		config_match = (variant_vrc == DA9122_VARIANT_VRC);
+		break;
+	case DA9121_SUBTYPE_DA9131:
+		type = "DA9131";
+		config_match = (variant_vrc == DA9131_VARIANT_VRC);
+		break;
+	case DA9121_SUBTYPE_DA9217:
 		type = "DA9217";
-		config_match = (chip_id == DA9121_TYPE_DA9217);
+		config_match = (variant_vrc == DA9217_VARIANT_VRC);
 		break;
 	default:
 		type = "Unknown";
@@ -892,15 +904,27 @@ static int da9121_assign_chip_model(struct i2c_client *i2c,
 
 	chip->dev = &i2c->dev;
 
-	switch (chip->variant_id) {
-	case DA9121_TYPE_DA9121_DA9130:
-		fallthrough;
-	case DA9121_TYPE_DA9217:
+	/* Use configured subtype to select the regulator descriptor index and
+	 * register map, common to both consumer and automotive grade variants
+	 */
+	switch (chip->subvariant_id) {
+	case DA9121_SUBTYPE_DA9121:
+	case DA9121_SUBTYPE_DA9130:
+		chip->variant_id = DA9121_TYPE_DA9121_DA9130;
 		regmap = &da9121_1ch_regmap_config;
 		break;
-	case DA9121_TYPE_DA9122_DA9131:
-		fallthrough;
-	case DA9121_TYPE_DA9220_DA9132:
+	case DA9121_SUBTYPE_DA9217:
+		chip->variant_id = DA9121_TYPE_DA9217;
+		regmap = &da9121_1ch_regmap_config;
+		break;
+	case DA9121_SUBTYPE_DA9122:
+	case DA9121_SUBTYPE_DA9131:
+		chip->variant_id = DA9121_TYPE_DA9122_DA9131;
+		regmap = &da9121_2ch_regmap_config;
+		break;
+	case DA9121_SUBTYPE_DA9220:
+	case DA9121_SUBTYPE_DA9132:
+		chip->variant_id = DA9121_TYPE_DA9220_DA9132;
 		regmap = &da9121_2ch_regmap_config;
 		break;
 	}
@@ -975,13 +999,13 @@ static int da9121_config_irq(struct i2c_client *i2c,
 }
 
 static const struct of_device_id da9121_dt_ids[] = {
-	{ .compatible = "dlg,da9121", .data = (void *) DA9121_TYPE_DA9121_DA9130 },
-	{ .compatible = "dlg,da9130", .data = (void *) DA9121_TYPE_DA9121_DA9130 },
-	{ .compatible = "dlg,da9217", .data = (void *) DA9121_TYPE_DA9217 },
-	{ .compatible = "dlg,da9122", .data = (void *) DA9121_TYPE_DA9122_DA9131 },
-	{ .compatible = "dlg,da9131", .data = (void *) DA9121_TYPE_DA9122_DA9131 },
-	{ .compatible = "dlg,da9220", .data = (void *) DA9121_TYPE_DA9220_DA9132 },
-	{ .compatible = "dlg,da9132", .data = (void *) DA9121_TYPE_DA9220_DA9132 },
+	{ .compatible = "dlg,da9121", .data = (void *) DA9121_SUBTYPE_DA9121 },
+	{ .compatible = "dlg,da9130", .data = (void *) DA9121_SUBTYPE_DA9130 },
+	{ .compatible = "dlg,da9217", .data = (void *) DA9121_SUBTYPE_DA9217 },
+	{ .compatible = "dlg,da9122", .data = (void *) DA9121_SUBTYPE_DA9122 },
+	{ .compatible = "dlg,da9131", .data = (void *) DA9121_SUBTYPE_DA9131 },
+	{ .compatible = "dlg,da9220", .data = (void *) DA9121_SUBTYPE_DA9220 },
+	{ .compatible = "dlg,da9132", .data = (void *) DA9121_SUBTYPE_DA9132 },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, da9121_dt_ids);
@@ -1011,7 +1035,7 @@ static int da9121_i2c_probe(struct i2c_client *i2c,
 	}
 
 	chip->pdata = i2c->dev.platform_data;
-	chip->variant_id = da9121_of_get_id(&i2c->dev);
+	chip->subvariant_id = da9121_of_get_id(&i2c->dev);
 
 	ret = da9121_assign_chip_model(i2c, chip);
 	if (ret < 0)

drivers/regulator/da9121-regulator.h

@@ -29,6 +29,16 @@ enum da9121_variant {
 	DA9121_TYPE_DA9217
 };
 
+enum da9121_subvariant {
+	DA9121_SUBTYPE_DA9121,
+	DA9121_SUBTYPE_DA9130,
+	DA9121_SUBTYPE_DA9220,
+	DA9121_SUBTYPE_DA9132,
+	DA9121_SUBTYPE_DA9122,
+	DA9121_SUBTYPE_DA9131,
+	DA9121_SUBTYPE_DA9217
+};
+
 /* Minimum, maximum and default polling millisecond periods are provided
  * here as an example. It is expected that any final implementation will
  * include a modification of these settings to match the required
@@ -279,6 +289,9 @@ enum da9121_variant {
 #define DA9220_VARIANT_VRC	0x0
 #define DA9122_VARIANT_VRC	0x2
 #define DA9217_VARIANT_VRC	0x7
+#define DA9130_VARIANT_VRC	0x0
+#define DA9131_VARIANT_VRC	0x1
+#define DA9132_VARIANT_VRC	0x2
 
 /* DA9121_REG_OTP_CUSTOMER_ID */
 

drivers/regulator/fan53555.c

@@ -24,6 +24,12 @@
 /* Voltage setting */
 #define FAN53555_VSEL0		0x00
 #define FAN53555_VSEL1		0x01
+
+#define TCS4525_VSEL0		0x11
+#define TCS4525_VSEL1		0x10
+#define TCS4525_TIME		0x13
+#define TCS4525_COMMAND		0x14
+
 /* Control register */
 #define FAN53555_CONTROL	0x02
 /* IC Type */
@@ -49,11 +55,20 @@
 
 #define FAN53555_NVOLTAGES	64	/* Numbers of voltages */
 #define FAN53526_NVOLTAGES	128
+#define TCS4525_NVOLTAGES	127	/* Numbers of voltages */
+
+#define TCS_VSEL_NSEL_MASK	0x7f
+#define TCS_VSEL0_MODE		(1 << 7)
+#define TCS_VSEL1_MODE		(1 << 6)
+
+#define TCS_SLEW_SHIFT		3
+#define TCS_SLEW_MASK		(0x3 < 3)
 
 enum fan53555_vendor {
 	FAN53526_VENDOR_FAIRCHILD = 0,
 	FAN53555_VENDOR_FAIRCHILD,
 	FAN53555_VENDOR_SILERGY,
+	FAN53555_VENDOR_TCS,
 };
 
 enum {
@@ -106,6 +121,11 @@ struct fan53555_device_info {
 	unsigned int mode_mask;
 	/* Sleep voltage cache */
 	unsigned int sleep_vol_cache;
+	/* Slew rate */
+	unsigned int slew_reg;
+	unsigned int slew_mask;
+	unsigned int slew_shift;
+	unsigned int slew_rate;
 };
 
 static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
@@ -189,13 +209,37 @@ static const int slew_rates[] = {
 	  500,
 };
 
+static const int tcs_slew_rates[] = {
+	18700,
+	 9300,
+	 4600,
+	 2300,
+};
+
 static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp)
 {
 	struct fan53555_device_info *di = rdev_get_drvdata(rdev);
 	int regval = -1, i;
+	const int *slew_rate_t;
+	int slew_rate_n;
 
-	for (i = 0; i < ARRAY_SIZE(slew_rates); i++) {
-		if (ramp <= slew_rates[i])
+	switch (di->vendor) {
+	case FAN53526_VENDOR_FAIRCHILD:
+	case FAN53555_VENDOR_FAIRCHILD:
+	case FAN53555_VENDOR_SILERGY:
+		slew_rate_t = slew_rates;
+		slew_rate_n = ARRAY_SIZE(slew_rates);
+		break;
+	case FAN53555_VENDOR_TCS:
+		slew_rate_t = tcs_slew_rates;
+		slew_rate_n = ARRAY_SIZE(tcs_slew_rates);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	for (i = 0; i < slew_rate_n; i++) {
+		if (ramp <= slew_rate_t[i])
 			regval = i;
 		else
 			break;
@@ -206,8 +250,8 @@ static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp)
 		return -EINVAL;
 	}
 
-	return regmap_update_bits(rdev->regmap, FAN53555_CONTROL,
-				  CTL_SLEW_MASK, regval << CTL_SLEW_SHIFT);
+	return regmap_update_bits(rdev->regmap, di->slew_reg,
+				  di->slew_mask, regval << di->slew_shift);
 }
 
 static const struct regulator_ops fan53555_regulator_ops = {
@@ -292,7 +336,9 @@ static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
 			"Chip ID %d not supported!\n", di->chip_id);
 		return -EINVAL;
 	}
-
+	di->slew_reg = FAN53555_CONTROL;
+	di->slew_mask = CTL_SLEW_MASK;
+	di->slew_shift = CTL_SLEW_SHIFT;
 	di->vsel_count = FAN53555_NVOLTAGES;
 
 	return 0;
@@ -312,12 +358,29 @@ static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
 			"Chip ID %d not supported!\n", di->chip_id);
 		return -EINVAL;
 	}
-
+	di->slew_reg = FAN53555_CONTROL;
+	di->slew_reg = FAN53555_CONTROL;
+	di->slew_mask = CTL_SLEW_MASK;
+	di->slew_shift = CTL_SLEW_SHIFT;
 	di->vsel_count = FAN53555_NVOLTAGES;
 
 	return 0;
 }
 
+static int fan53555_voltages_setup_tcs(struct fan53555_device_info *di)
+{
+	di->slew_reg = TCS4525_TIME;
+	di->slew_mask = TCS_SLEW_MASK;
+	di->slew_shift = TCS_SLEW_MASK;
+
+	/* Init voltage range and step */
+	di->vsel_min = 600000;
+	di->vsel_step = 6250;
+	di->vsel_count = TCS4525_NVOLTAGES;
+
+	return 0;
+}
+
 /* For 00,01,03,05 options:
  * VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V.
  * For 04 option:
@@ -329,17 +392,41 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
 	int ret = 0;
 
 	/* Setup voltage control register */
-	switch (pdata->sleep_vsel_id) {
-	case FAN53555_VSEL_ID_0:
-		di->sleep_reg = FAN53555_VSEL0;
-		di->vol_reg = FAN53555_VSEL1;
+	switch (di->vendor) {
+	case FAN53526_VENDOR_FAIRCHILD:
+	case FAN53555_VENDOR_FAIRCHILD:
+	case FAN53555_VENDOR_SILERGY:
+		switch (pdata->sleep_vsel_id) {
+		case FAN53555_VSEL_ID_0:
+			di->sleep_reg = FAN53555_VSEL0;
+			di->vol_reg = FAN53555_VSEL1;
+			break;
+		case FAN53555_VSEL_ID_1:
+			di->sleep_reg = FAN53555_VSEL1;
+			di->vol_reg = FAN53555_VSEL0;
+			break;
+		default:
+			dev_err(di->dev, "Invalid VSEL ID!\n");
+			return -EINVAL;
+		}
 		break;
-	case FAN53555_VSEL_ID_1:
-		di->sleep_reg = FAN53555_VSEL1;
-		di->vol_reg = FAN53555_VSEL0;
+	case FAN53555_VENDOR_TCS:
+		switch (pdata->sleep_vsel_id) {
+		case FAN53555_VSEL_ID_0:
+			di->sleep_reg = TCS4525_VSEL0;
+			di->vol_reg = TCS4525_VSEL1;
+			break;
+		case FAN53555_VSEL_ID_1:
+			di->sleep_reg = TCS4525_VSEL1;
+			di->vol_reg = TCS4525_VSEL0;
+			break;
+		default:
+			dev_err(di->dev, "Invalid VSEL ID!\n");
+			return -EINVAL;
+		}
 		break;
 	default:
-		dev_err(di->dev, "Invalid VSEL ID!\n");
+		dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
 		return -EINVAL;
 	}
 
@@ -362,6 +449,18 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
 		di->mode_reg = di->vol_reg;
 		di->mode_mask = VSEL_MODE;
 		break;
+	case FAN53555_VENDOR_TCS:
+		di->mode_reg = TCS4525_COMMAND;
+
+		switch (pdata->sleep_vsel_id) {
+		case FAN53555_VSEL_ID_0:
+			di->mode_mask = TCS_VSEL1_MODE;
+			break;
+		case FAN53555_VSEL_ID_1:
+			di->mode_mask = TCS_VSEL0_MODE;
+			break;
+		}
+		break;
 	default:
 		dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
 		return -EINVAL;
@@ -378,6 +477,9 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
 	case FAN53555_VENDOR_SILERGY:
 		ret = fan53555_voltages_setup_silergy(di);
 		break;
+	case FAN53555_VENDOR_TCS:
+		ret = fan53555_voltages_setup_tcs(di);
+		break;
 	default:
 		dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
 		return -EINVAL;
@@ -449,6 +551,9 @@ static const struct of_device_id __maybe_unused fan53555_dt_ids[] = {
 	}, {
 		.compatible = "silergy,syr828",
 		.data = (void *)FAN53555_VENDOR_SILERGY,
+	}, {
+		.compatible = "tcs,tcs4525",
+		.data = (void *)FAN53555_VENDOR_TCS
 	},
 	{ }
 };
@@ -554,6 +659,9 @@ static const struct i2c_device_id fan53555_id[] = {
 	}, {
 		.name = "syr828",
 		.driver_data = FAN53555_VENDOR_SILERGY
+	}, {
+		.name = "tcs4525",
+		.driver_data = FAN53555_VENDOR_TCS
 	},
 	{ },
 };

drivers/regulator/helpers.c

@@ -508,6 +508,33 @@ int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev,
 }
 EXPORT_SYMBOL_GPL(regulator_map_voltage_pickable_linear_range);
 
+/**
+ * regulator_desc_list_voltage_linear - List voltages with simple calculation
+ *
+ * @desc: Regulator desc for regulator which volatges are to be listed
+ * @selector: Selector to convert into a voltage
+ *
+ * Regulators with a simple linear mapping between voltages and
+ * selectors can set min_uV and uV_step in the regulator descriptor
+ * and then use this function prior regulator registration to list
+ * the voltages. This is useful when voltages need to be listed during
+ * device-tree parsing.
+ */
+int regulator_desc_list_voltage_linear(const struct regulator_desc *desc,
+				       unsigned int selector)
+{
+	if (selector >= desc->n_voltages)
+		return -EINVAL;
+
+	if (selector < desc->linear_min_sel)
+		return 0;
+
+	selector -= desc->linear_min_sel;
+
+	return desc->min_uV + (desc->uV_step * selector);
+}
+EXPORT_SYMBOL_GPL(regulator_desc_list_voltage_linear);
+
 /**
  * regulator_list_voltage_linear - List voltages with simple calculation
  *
@@ -521,14 +548,7 @@ EXPORT_SYMBOL_GPL(regulator_map_voltage_pickable_linear_range);
 int regulator_list_voltage_linear(struct regulator_dev *rdev,
 				  unsigned int selector)
 {
-	if (selector >= rdev->desc->n_voltages)
-		return -EINVAL;
-	if (selector < rdev->desc->linear_min_sel)
-		return 0;
-
-	selector -= rdev->desc->linear_min_sel;
-
-	return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
+	return regulator_desc_list_voltage_linear(rdev->desc, selector);
 }
 EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);
 
@@ -881,3 +901,68 @@ bool regulator_is_equal(struct regulator *reg1, struct regulator *reg2)
 	return reg1->rdev == reg2->rdev;
 }
 EXPORT_SYMBOL_GPL(regulator_is_equal);
+
+static int find_closest_bigger(unsigned int target, const unsigned int *table,
+			       unsigned int num_sel, unsigned int *sel)
+{
+	unsigned int s, tmp, max, maxsel = 0;
+	bool found = false;
+
+	max = table[0];
+
+	for (s = 0; s < num_sel; s++) {
+		if (table[s] > max) {
+			max = table[s];
+			maxsel = s;
+		}
+		if (table[s] >= target) {
+			if (!found || table[s] - target < tmp - target) {
+				tmp = table[s];
+				*sel = s;
+				found = true;
+				if (tmp == target)
+					break;
+			}
+		}
+	}
+
+	if (!found) {
+		*sel = maxsel;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * regulator_set_ramp_delay_regmap - set_ramp_delay() helper
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the ramp_reg
+ * and ramp_mask fields in their descriptor and then use this as their
+ * set_ramp_delay operation, saving some code.
+ */
+int regulator_set_ramp_delay_regmap(struct regulator_dev *rdev, int ramp_delay)
+{
+	int ret;
+	unsigned int sel;
+
+	if (!rdev->desc->n_ramp_values)
+		return -EINVAL;
+
+	ret = find_closest_bigger(ramp_delay, rdev->desc->ramp_delay_table,
+				  rdev->desc->n_ramp_values, &sel);
+
+	if (ret) {
+		dev_warn(rdev_get_dev(rdev),
+			 "Can't set ramp-delay %u, setting %u\n", ramp_delay,
+			 rdev->desc->ramp_delay_table[sel]);
+	}
+
+	sel <<= ffs(rdev->desc->ramp_mask) - 1;
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->ramp_reg,
+				  rdev->desc->ramp_mask, sel);
+}
+EXPORT_SYMBOL_GPL(regulator_set_ramp_delay_regmap);

drivers/regulator/mt6360-regulator.c

@@ -380,10 +380,8 @@ static int mt6360_regulator_irq_register(struct platform_device *pdev,
 		const struct mt6360_irq_mapping *irq_desc = tbls + i;
 
 		irq = platform_get_irq_byname(pdev, irq_desc->name);
-		if (irq < 0) {
-			dev_err(&pdev->dev, "Fail to get %s irq\n", irq_desc->name);
+		if (irq < 0)
 			return irq;
-		}
 
 		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, irq_desc->handler, 0,
 						irq_desc->name, rdev);

drivers/regulator/of_regulator.c

@@ -422,7 +422,11 @@ device_node *regulator_of_get_init_node(struct device *dev,
 
 		if (!strcmp(desc->of_match, name)) {
 			of_node_put(search);
-			return of_node_get(child);
+			/*
+			 * 'of_node_get(child)' is already performed by the
+			 * for_each loop.
+			 */
+			return child;
 		}
 	}
 

drivers/regulator/pf8x00-regulator.c

@@ -359,6 +359,7 @@ static const struct regulator_ops pf8x00_buck7_ops = {
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_ascend,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.get_current_limit = regulator_get_current_limit_regmap,

drivers/regulator/qcom-rpmh-regulator.c

 // SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
+// Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
 
 #define pr_fmt(fmt) "%s: " fmt, __func__
 
@@ -723,6 +723,15 @@ static const struct rpmh_vreg_hw_data pmic5_ftsmps510 = {
 	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
 };
 
+static const struct rpmh_vreg_hw_data pmic5_ftsmps520 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 263, 4000),
+	.n_voltages = 264,
+	.pmic_mode_map = pmic_mode_map_pmic5_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
 static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
 	.regulator_type = VRM,
 	.ops = &rpmh_regulator_vrm_ops,
@@ -1033,6 +1042,49 @@ static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
 	{},
 };
 
+static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_hfsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps520, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic5_ftsmps520, "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic5_ftsmps520, "vdd-s4"),
+	RPMH_VREG("smps5",  "smp%s5",  &pmic5_ftsmps520, "vdd-s5"),
+	RPMH_VREG("smps6",  "smp%s6",  &pmic5_ftsmps520, "vdd-s6"),
+	RPMH_VREG("smps7",  "smp%s7",  &pmic5_ftsmps520, "vdd-s7"),
+	RPMH_VREG("smps8",  "smp%s8",  &pmic5_hfsmps510, "vdd-s8"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1-l4-l12-l15"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_pldo,      "vdd-l2-l7"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l1-l4-l12-l15"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_nldo,      "vdd-l5"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_nldo,      "vdd-l6-l9-l10"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l2-l7"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_nldo,      "vdd-l8"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_nldo,      "vdd-l6-l9-l10"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_nldo,      "vdd-l6-l9-l10"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo_lv,   "vdd-l11-l17-l18-l19"),
+	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_nldo,      "vdd-l1-l4-l12-l15"),
+	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_nldo,      "vdd-l13"),
+	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_nldo,      "vdd-l14-l16"),
+	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_nldo,      "vdd-l1-l4-l12-l15"),
+	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_nldo,      "vdd-l14-l16"),
+	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo_lv,   "vdd-l11-l17-l18-l19"),
+	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_pldo_lv,   "vdd-l11-l17-l18-l19"),
+	RPMH_VREG("ldo19",  "ldo%s19", &pmic5_pldo_lv,   "vdd-l11-l17-l18-l19"),
+};
+
+static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps520, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps520, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic5_hfsmps510, "vdd-s3"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1-l2"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo,      "vdd-l1-l2"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_pldo_lv,   "vdd-l4"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_nldo,      "vdd-l5-l6"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_nldo,      "vdd-l5-l6"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l7-bob"),
+};
+
 static int rpmh_regulator_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1127,6 +1179,14 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
 		.compatible = "qcom,pmx55-rpmh-regulators",
 		.data = pmx55_vreg_data,
 	},
+	{
+		.compatible = "qcom,pm7325-rpmh-regulators",
+		.data = pm7325_vreg_data,
+	},
+	{
+		.compatible = "qcom,pmr735a-rpmh-regulators",
+		.data = pmr735a_vreg_data,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);

drivers/regulator/qcom_spmi-regulator.c

@@ -1523,10 +1523,12 @@ static const struct spmi_regulator_mapping supported_regulators[] = {
 	SPMI_VREG(ULT_LDO, N600_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
 	SPMI_VREG(ULT_LDO, N900_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
 	SPMI_VREG(ULT_LDO, N1200_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
+	SPMI_VREG(ULT_LDO, LV_P50,   0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
 	SPMI_VREG(ULT_LDO, LV_P150,  0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
 	SPMI_VREG(ULT_LDO, LV_P300,  0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
 	SPMI_VREG(ULT_LDO, LV_P450,  0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
 	SPMI_VREG(ULT_LDO, P600,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, P300,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
 	SPMI_VREG(ULT_LDO, P150,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
 	SPMI_VREG(ULT_LDO, P50,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 5000),
 };

drivers/regulator/s2mpa01.c

@@ -340,7 +340,6 @@ static const struct regulator_desc regulators[] = {
 static int s2mpa01_pmic_probe(struct platform_device *pdev)
 {
 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-	struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
 	struct regulator_config config = { };
 	struct s2mpa01_info *s2mpa01;
 	int i;
@@ -356,9 +355,6 @@ static int s2mpa01_pmic_probe(struct platform_device *pdev)
 	for (i = 0; i < S2MPA01_REGULATOR_MAX; i++) {
 		struct regulator_dev *rdev;
 
-		if (pdata)
-			config.init_data = pdata->regulators[i].initdata;
-
 		rdev = devm_regulator_register(&pdev->dev,
 						&regulators[i], &config);
 		if (IS_ERR(rdev)) {

drivers/regulator/s2mps11.c

@@ -1120,7 +1120,6 @@ static const struct regulator_desc s2mpu02_regulators[] = {
 static int s2mps11_pmic_probe(struct platform_device *pdev)
 {
 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-	struct sec_platform_data *pdata = NULL;
 	struct of_regulator_match *rdata = NULL;
 	struct regulator_config config = { };
 	struct s2mps11_info *s2mps11;
@@ -1171,17 +1170,6 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 	if (!s2mps11->ext_control_gpiod)
 		return -ENOMEM;
 
-	if (!iodev->dev->of_node) {
-		if (iodev->pdata) {
-			pdata = iodev->pdata;
-			goto common_reg;
-		} else {
-			dev_err(pdev->dev.parent,
-				"Platform data or DT node not supplied\n");
-			return -ENODEV;
-		}
-	}
-
 	rdata = kcalloc(rdev_num, sizeof(*rdata), GFP_KERNEL);
 	if (!rdata)
 		return -ENOMEM;
@@ -1193,7 +1181,6 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 	if (ret)
 		goto out;
 
-common_reg:
 	platform_set_drvdata(pdev, s2mps11);
 
 	config.dev = &pdev->dev;
@@ -1202,13 +1189,8 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 	for (i = 0; i < rdev_num; i++) {
 		struct regulator_dev *regulator;
 
-		if (pdata) {
-			config.init_data = pdata->regulators[i].initdata;
-			config.of_node = pdata->regulators[i].reg_node;
-		} else {
-			config.init_data = rdata[i].init_data;
-			config.of_node = rdata[i].of_node;
-		}
+		config.init_data = rdata[i].init_data;
+		config.of_node = rdata[i].of_node;
 		config.ena_gpiod = s2mps11->ext_control_gpiod[i];
 		/*
 		 * Hand the GPIO descriptor management over to the regulator

drivers/regulator/scmi-regulator.c

@@ -347,8 +347,10 @@ static int scmi_regulator_probe(struct scmi_device *sdev)
 	for_each_child_of_node(np, child) {
 		ret = process_scmi_regulator_of_node(sdev, ph, child, rinfo);
 		/* abort on any mem issue */
-		if (ret == -ENOMEM)
+		if (ret == -ENOMEM) {
+			of_node_put(child);
 			return ret;
+		}
 	}
 
 	/*

include/linux/regulator/driver.h

@@ -373,6 +373,10 @@ struct regulator_desc {
 	unsigned int pull_down_reg;
 	unsigned int pull_down_mask;
 	unsigned int pull_down_val_on;
+	unsigned int ramp_reg;
+	unsigned int ramp_mask;
+	const unsigned int *ramp_delay_table;
+	unsigned int n_ramp_values;
 
 	unsigned int enable_time;
 
@@ -472,7 +476,7 @@ struct regulator_dev {
 	unsigned int is_switch:1;
 
 	/* time when this regulator was disabled last time */
-	unsigned long last_off_jiffy;
+	ktime_t last_off;
 };
 
 struct regulator_dev *
@@ -535,6 +539,7 @@ int regulator_set_current_limit_regmap(struct regulator_dev *rdev,
 				       int min_uA, int max_uA);
 int regulator_get_current_limit_regmap(struct regulator_dev *rdev);
 void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
+int regulator_set_ramp_delay_regmap(struct regulator_dev *rdev, int ramp_delay);
 
 /*
  * Helper functions intended to be used by regulator drivers prior registering
@@ -543,4 +548,6 @@ void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
 int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc,
 					     unsigned int selector);
 
+int regulator_desc_list_voltage_linear(const struct regulator_desc *desc,
+				       unsigned int selector);
 #endif