ARM: dts: at91: change the key code of the gpio key

Having a button code and not a key code causes issues with libinput.
udev won't set ID_INPUT_KEY. If it is forced, then it causes a bug
within libinput.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210402130227.21478-1-nicolas.ferre@microchip.com

arch/arm/boot/dts/at91-sam9x60ek.dts

@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Microchip SAM9X60-EK";
@@ -84,7 +85,7 @@ gpio_keys {
 		sw1 {
 			label = "SW1";
 			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
-			linux,code=<0x104>;
+			linux,code=<KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91-sama5d27_som1_ek.dts

@@ -11,6 +11,7 @@
 #include "at91-sama5d27_som1.dtsi"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel SAMA5D27 SOM1 EK";
@@ -466,7 +467,7 @@ gpio_keys {
 		pb4 {
 			label = "USER";
 			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts

@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "at91-sama5d27_wlsom1.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Microchip SAMA5D27 WLSOM1 EK";
@@ -35,7 +36,7 @@ gpio_keys {
 		sw4 {
 			label = "USER BUTTON";
 			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91-sama5d2_icp.dts

@@ -12,6 +12,7 @@
 #include "sama5d2.dtsi"
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
 
 / {
@@ -51,7 +52,7 @@ gpio_keys {
 		sw4 {
 			label = "USER_PB1";
 			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts

@@ -11,6 +11,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/at91.h>
 
 / {
@@ -402,7 +403,7 @@ gpio_keys {
 		bp1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91-sama5d2_xplained.dts

@@ -10,6 +10,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
 
 / {
@@ -712,7 +713,7 @@ gpio_keys {
 		bp1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91-sama5d3_xplained.dts

@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "sama5d36.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "SAMA5D3 Xplained";
@@ -354,7 +355,7 @@ gpio_keys {
 		bp3 {
 			label = "PB_USER";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91sam9260ek.dts

@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "at91sam9260.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel at91sam9260ek";
@@ -156,7 +157,7 @@ btn3 {
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/at91sam9g20ek_common.dtsi

@@ -5,6 +5,7 @@
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
 #include "at91sam9g20.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 
@@ -234,7 +235,7 @@ btn3 {
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};