accel/ivpu: Remove configuration of MMU TBU1 and TBU3

MTL HW only uses StreamId0 and StreamId3 that map to TBU0 and TBU2.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230518131605.650622-2-stanislaw.gruszka@linux.intel.com

drivers/accel/ivpu/ivpu_hw_mtl.c

@@ -537,21 +537,10 @@ static void ivpu_boot_tbu_mmu_enable(struct ivpu_device *vdev)
 {
 	u32 val = REGV_RD32(MTL_VPU_HOST_IF_TBU_MMUSSIDV);
 
-	if (ivpu_is_fpga(vdev)) {
-		val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU0_AWMMUSSIDV, val);
-		val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU0_ARMMUSSIDV, val);
-		val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU2_AWMMUSSIDV, val);
-		val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU2_ARMMUSSIDV, val);
-	} else {
-		val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU0_AWMMUSSIDV, val);
-		val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU0_ARMMUSSIDV, val);
-		val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU1_AWMMUSSIDV, val);
-		val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU1_ARMMUSSIDV, val);
-		val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU2_AWMMUSSIDV, val);
-		val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU2_ARMMUSSIDV, val);
-		val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU3_AWMMUSSIDV, val);
-		val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU3_ARMMUSSIDV, val);
-	}
+	val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU0_AWMMUSSIDV, val);
+	val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU0_ARMMUSSIDV, val);
+	val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU2_AWMMUSSIDV, val);
+	val = REG_SET_FLD(MTL_VPU_HOST_IF_TBU_MMUSSIDV, TBU2_ARMMUSSIDV, val);
 
 	REGV_WR32(MTL_VPU_HOST_IF_TBU_MMUSSIDV, val);
 }