crypto: octeontx2 - add LF reset on queue disable

CPT LF must be reset and follow CPT LF disable sequence
suggested by HW team, when driver exits.
This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/marvell/octeontx2/otx2_cpt_common.h

@@ -218,5 +218,6 @@ int otx2_cpt_attach_rscrs_msg(struct otx2_cptlfs_info *lfs);
 int otx2_cpt_detach_rsrcs_msg(struct otx2_cptlfs_info *lfs);
 int otx2_cpt_msix_offset_msg(struct otx2_cptlfs_info *lfs);
 int otx2_cpt_sync_mbox_msg(struct otx2_mbox *mbox);
+int otx2_cpt_lf_reset_msg(struct otx2_cptlfs_info *lfs, int slot);
 
 #endif /* __OTX2_CPT_COMMON_H */

drivers/crypto/marvell/octeontx2/otx2_cpt_mbox_common.c

@@ -229,3 +229,29 @@ int otx2_cpt_sync_mbox_msg(struct otx2_mbox *mbox)
 	return otx2_mbox_check_rsp_msgs(mbox, 0);
 }
 EXPORT_SYMBOL_NS_GPL(otx2_cpt_sync_mbox_msg, CRYPTO_DEV_OCTEONTX2_CPT);
+
+int otx2_cpt_lf_reset_msg(struct otx2_cptlfs_info *lfs, int slot)
+{
+	struct otx2_mbox *mbox = lfs->mbox;
+	struct pci_dev *pdev = lfs->pdev;
+	struct cpt_lf_rst_req *req;
+	int ret;
+
+	req = (struct cpt_lf_rst_req *)otx2_mbox_alloc_msg_rsp(mbox, 0, sizeof(*req),
+							       sizeof(struct msg_rsp));
+	if (!req) {
+		dev_err(&pdev->dev, "RVU MBOX failed to get message.\n");
+		return -EFAULT;
+	}
+
+	req->hdr.id = MBOX_MSG_CPT_LF_RESET;
+	req->hdr.sig = OTX2_MBOX_REQ_SIG;
+	req->hdr.pcifunc = 0;
+	req->slot = slot;
+	ret = otx2_cpt_send_mbox_msg(mbox, pdev);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+EXPORT_SYMBOL_NS_GPL(otx2_cpt_lf_reset_msg, CRYPTO_DEV_OCTEONTX2_CPT);

drivers/crypto/marvell/octeontx2/otx2_cptlf.h

@@ -5,6 +5,7 @@
 #define __OTX2_CPTLF_H
 
 #include <linux/soc/marvell/octeontx2/asm.h>
+#include <linux/bitfield.h>
 #include <mbox.h>
 #include <rvu.h>
 #include "otx2_cpt_common.h"
@@ -119,6 +120,7 @@ struct otx2_cptlfs_info {
 	u8 kvf_limits;          /* Kernel crypto limits */
 	atomic_t state;         /* LF's state. started/reset */
 	int blkaddr;            /* CPT blkaddr: BLKADDR_CPT0/BLKADDR_CPT1 */
+	int global_slot;        /* Global slot across the blocks */
 };
 
 static inline void otx2_cpt_free_instruction_queues(
@@ -206,48 +208,71 @@ static inline void otx2_cptlf_set_iqueues_size(struct otx2_cptlfs_info *lfs)
 		otx2_cptlf_do_set_iqueue_size(&lfs->lf[slot]);
 }
 
+#define INFLIGHT   GENMASK_ULL(8, 0)
+#define GRB_CNT    GENMASK_ULL(39, 32)
+#define GWB_CNT    GENMASK_ULL(47, 40)
+#define XQ_XOR     GENMASK_ULL(63, 63)
+#define DQPTR      GENMASK_ULL(19, 0)
+#define NQPTR      GENMASK_ULL(51, 32)
+
 static inline void otx2_cptlf_do_disable_iqueue(struct otx2_cptlf_info *lf)
 {
-	union otx2_cptx_lf_ctl lf_ctl = { .u = 0x0 };
-	union otx2_cptx_lf_inprog lf_inprog;
+	void __iomem *reg_base = lf->lfs->reg_base;
+	struct pci_dev *pdev = lf->lfs->pdev;
 	u8 blkaddr = lf->lfs->blkaddr;
-	int timeout = 20;
+	int timeout = 1000000;
+	u64 inprog, inst_ptr;
+	u64 slot = lf->slot;
+	u64 qsize, pending;
+	int i = 0;
 
 	/* Disable instructions enqueuing */
-	otx2_cpt_write64(lf->lfs->reg_base, blkaddr, lf->slot,
-			 OTX2_CPT_LF_CTL, lf_ctl.u);
+	otx2_cpt_write64(reg_base, blkaddr, slot, OTX2_CPT_LF_CTL, 0x0);
 
-	/* Wait for instruction queue to become empty */
+	inprog = otx2_cpt_read64(reg_base, blkaddr, slot, OTX2_CPT_LF_INPROG);
+	inprog |= BIT_ULL(16);
+	otx2_cpt_write64(reg_base, blkaddr, slot, OTX2_CPT_LF_INPROG, inprog);
+
+	qsize = otx2_cpt_read64(reg_base, blkaddr, slot, OTX2_CPT_LF_Q_SIZE) & 0x7FFF;
+	do {
+		inst_ptr = otx2_cpt_read64(reg_base, blkaddr, slot, OTX2_CPT_LF_Q_INST_PTR);
+		pending = (FIELD_GET(XQ_XOR, inst_ptr) * qsize * 40) +
+			  FIELD_GET(NQPTR, inst_ptr) - FIELD_GET(DQPTR, inst_ptr);
+		udelay(1);
+		timeout--;
+	} while ((pending != 0) && (timeout != 0));
+
+	if (timeout == 0)
+		dev_warn(&pdev->dev, "TIMEOUT: CPT poll on pending instructions\n");
+
+	timeout = 1000000;
+	/* Wait for CPT queue to become execution-quiescent */
 	do {
-		lf_inprog.u = otx2_cpt_read64(lf->lfs->reg_base, blkaddr,
-					      lf->slot, OTX2_CPT_LF_INPROG);
-		if (!lf_inprog.s.inflight)
-			break;
-
-		usleep_range(10000, 20000);
-		if (timeout-- < 0) {
-			dev_err(&lf->lfs->pdev->dev,
-				"Error LF %d is still busy.\n", lf->slot);
-			break;
+		inprog = otx2_cpt_read64(reg_base, blkaddr, slot, OTX2_CPT_LF_INPROG);
+
+		if ((FIELD_GET(INFLIGHT, inprog) == 0) &&
+		    (FIELD_GET(GRB_CNT, inprog) == 0)) {
+			i++;
+		} else {
+			i = 0;
+			timeout--;
 		}
+	} while ((timeout != 0) && (i < 10));
 
-	} while (1);
-
-	/*
-	 * Disable executions in the LF's queue,
-	 * the queue should be empty at this point
-	 */
-	lf_inprog.s.eena = 0x0;
-	otx2_cpt_write64(lf->lfs->reg_base, blkaddr, lf->slot,
-			 OTX2_CPT_LF_INPROG, lf_inprog.u);
+	if (timeout == 0)
+		dev_warn(&pdev->dev, "TIMEOUT: CPT poll on inflight count\n");
+	/* Wait for 2 us to flush all queue writes to memory */
+	udelay(2);
 }
 
 static inline void otx2_cptlf_disable_iqueues(struct otx2_cptlfs_info *lfs)
 {
 	int slot;
 
-	for (slot = 0; slot < lfs->lfs_num; slot++)
+	for (slot = 0; slot < lfs->lfs_num; slot++) {
 		otx2_cptlf_do_disable_iqueue(&lfs->lf[slot]);
+		otx2_cpt_lf_reset_msg(lfs, lfs->global_slot + slot);
+	}
 }
 
 static inline void otx2_cptlf_set_iqueue_enq(struct otx2_cptlf_info *lf,

drivers/crypto/marvell/octeontx2/otx2_cptpf_mbox.c

@@ -201,8 +201,8 @@ static int handle_msg_rx_inline_ipsec_lf_cfg(struct otx2_cptpf_dev *cptpf,
 					     struct mbox_msghdr *req)
 {
 	struct otx2_cpt_rx_inline_lf_cfg *cfg_req;
+	int num_lfs = 1, ret;
 	u8 egrp;
-	int ret;
 
 	cfg_req = (struct otx2_cpt_rx_inline_lf_cfg *)req;
 	if (cptpf->lfs.lfs_num) {
@@ -223,8 +223,9 @@ static int handle_msg_rx_inline_ipsec_lf_cfg(struct otx2_cptpf_dev *cptpf,
 
 	otx2_cptlf_set_dev_info(&cptpf->lfs, cptpf->pdev, cptpf->reg_base,
 				&cptpf->afpf_mbox, BLKADDR_CPT0);
+	cptpf->lfs.global_slot = 0;
 	ret = otx2_cptlf_init(&cptpf->lfs, 1 << egrp, OTX2_CPT_QUEUE_HI_PRIO,
-			      1);
+			      num_lfs);
 	if (ret) {
 		dev_err(&cptpf->pdev->dev,
 			"LF configuration failed for RX inline ipsec.\n");
@@ -236,8 +237,9 @@ static int handle_msg_rx_inline_ipsec_lf_cfg(struct otx2_cptpf_dev *cptpf,
 		otx2_cptlf_set_dev_info(&cptpf->cpt1_lfs, cptpf->pdev,
 					cptpf->reg_base, &cptpf->afpf_mbox,
 					BLKADDR_CPT1);
+		cptpf->cpt1_lfs.global_slot = num_lfs;
 		ret = otx2_cptlf_init(&cptpf->cpt1_lfs, 1 << egrp,
-				      OTX2_CPT_QUEUE_HI_PRIO, 1);
+				      OTX2_CPT_QUEUE_HI_PRIO, num_lfs);
 		if (ret) {
 			dev_err(&cptpf->pdev->dev,
 				"LF configuration failed for RX inline ipsec.\n");
@@ -449,6 +451,7 @@ static void process_afpf_mbox_msg(struct otx2_cptpf_dev *cptpf,
 		break;
 	case MBOX_MSG_CPT_INLINE_IPSEC_CFG:
 	case MBOX_MSG_NIX_INLINE_IPSEC_CFG:
+	case MBOX_MSG_CPT_LF_RESET:
 		break;
 
 	default:

drivers/crypto/marvell/octeontx2/otx2_cptvf_mbox.c

@@ -133,6 +133,8 @@ static void process_pfvf_mbox_mbox_msg(struct otx2_cptvf_dev *cptvf,
 		memcpy(cptvf->eng_caps, eng_caps->eng_caps,
 		       sizeof(cptvf->eng_caps));
 		break;
+	case MBOX_MSG_CPT_LF_RESET:
+		break;
 	default:
 		dev_err(&cptvf->pdev->dev, "Unsupported msg %d received.\n",
 			msg->id);