Commit cb1e322c authored by Konrad Dybcio's avatar Konrad Dybcio Committed by Bjorn Andersson

arm64: dts: qcom: sdm845-tama: Add GPIO line names for PMIC GPIOs

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the Akari, Apollo & Akatsuki DTS-es to better document
the hardware.

pm8005 and pm8998 config is common for all three boards.
Apollo has VIB_LDO_EN (replacing NC) on PMI8998_GPIO_5

Akari and Akatsuki have WLC_EN_N (replacing NC) on PMI8998_GPIO_8

Akari additionally has RSVD(WLC_EN_N) (replacing) on PMI8998_GPIO_11
which sounds a bit like a forgot-to-update-documentation, but maybe
it differs between SKUs.. Time will tell, when we get to enabling the
wireless charger.
Signed-off-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230824-topic-tama_gpio-v1-2-014e9d198dce@linaro.orgSigned-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent ed92c9c8
......@@ -16,6 +16,23 @@ &panel {
compatible = "sony,td4353-jdi-tama";
};
&pmi8998_gpios {
gpio-line-names = "NC", /* GPIO_1 */
"NC",
"NC",
"",
"NC",
"NC",
"",
"WLC_EN_N",
"NC",
"NC", /* GPIO_10 */
"RSVD(WLC_EN_N)",
"CAM_IO_EN",
"",
"NC";
};
&tlmm {
gpio-line-names = "NC", /* GPIO_0 */
"NC",
......
......@@ -44,6 +44,23 @@ &panel {
/delete-property/ touch-reset-gpios;
};
&pmi8998_gpios {
gpio-line-names = "NC", /* GPIO_1 */
"NC",
"NC",
"",
"NC",
"NC",
"",
"WLC_EN_N",
"NC",
"NC", /* GPIO_10 */
"NC",
"CAM_IO_EN",
"",
"NC";
};
&pmi8998_wled {
status = "disabled";
};
......
......@@ -18,6 +18,23 @@ &panel {
width-mm = <56>;
};
&pmi8998_gpios {
gpio-line-names = "NC", /* GPIO_1 */
"NC",
"NC",
"",
"VIB_LDO_EN",
"NC",
"",
"NC",
"NC",
"NC", /* GPIO_10 */
"NC",
"CAM_IO_EN",
"",
"NC";
};
&tlmm {
gpio-line-names = "NC", /* GPIO_0 */
"NC",
......
......@@ -524,7 +524,41 @@ &mdss_dsi0_phy {
status = "okay";
};
&pm8005_gpios {
gpio-line-names = "NC", /* GPIO_1 */
"NC",
"",
"";
};
&pm8998_gpios {
gpio-line-names = "NC", /* GPIO_1 */
"FOCUS_N",
"",
"NC",
"VOL_DOWN_N",
"VOL_UP_N",
"SNAPSHOT_N",
"NC",
"FLASH_THERM",
"NC", /* GPIO_10 */
"LCD_ID",
"RF_ID",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"", /* GPIO_20 */
"NFC_CLK_REQ",
"",
"",
"",
"",
"";
focus_n: focus-n-state {
pins = "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment