Merge branch 'upstream-fixes' into upstream

MAINTAINERS

@@ -1905,6 +1905,12 @@ M:	James.Bottomley@HansenPartnership.com
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 
+NETEM NETWORK EMULATOR
+P:	Stephen Hemminger
+M:	shemminger@osdl.org
+L:	netem@osdl.org
+S:	Maintained
+
 NETFILTER/IPTABLES/IPCHAINS
 P:	Rusty Russell
 P:	Marc Boucher

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 17
-EXTRAVERSION =-rc4
-NAME=Sliding Snow Leopard
+EXTRAVERSION =-rc5
+NAME=Lordi Rules
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/i386/kernel/syscall_table.S

@@ -315,3 +315,4 @@ ENTRY(sys_call_table)
 	.long sys_splice
 	.long sys_sync_file_range
 	.long sys_tee			/* 315 */
+	.long sys_vmsplice

arch/powerpc/platforms/powermac/setup.c

@@ -463,11 +463,23 @@ static int pmac_pm_finish(suspend_state_t state)
 	return 0;
 }
 
+static int pmac_pm_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_DISK:
+		return 1;
+	/* can't do any other states via generic mechanism yet */
+	default:
+		return 0;
+	}
+}
+
 static struct pm_ops pmac_pm_ops = {
 	.pm_disk_mode	= PM_DISK_SHUTDOWN,
 	.prepare	= pmac_pm_prepare,
 	.enter		= pmac_pm_enter,
 	.finish		= pmac_pm_finish,
+	.valid		= pmac_pm_valid,
 };
 
 #endif /* CONFIG_SOFTWARE_SUSPEND */

arch/s390/kernel/time.c

@@ -272,7 +272,7 @@ static inline void stop_hz_timer(void)
 	next = next_timer_interrupt();
 	do {
 		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		timer = (__u64 next) - (__u64 jiffies) + jiffies_64;
+		timer = ((__u64) next) - ((__u64) jiffies) + jiffies_64;
 	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
 	todval = -1ULL;
 	/* Be careful about overflows. */

drivers/char/tpm/tpm_tis.c

@@ -457,10 +457,6 @@ static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
 	}
 
 	vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
-	if ((vendor & 0xFFFF) == 0xFFFF) {
-		rc = -ENODEV;
-		goto out_err;
-	}
 
 	/* Default timeouts */
 	chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);

drivers/i2c/busses/scx200_acb.c

@@ -491,7 +491,7 @@ static struct pci_device_id divil_pci[] = {
 
 #define MSR_LBAR_SMB		0x5140000B
 
-static int scx200_add_cs553x(void)
+static __init int scx200_add_cs553x(void)
 {
 	u32	low, hi;
 	u32	smb_base;

drivers/infiniband/hw/ipath/ipath_driver.c

@@ -1905,19 +1905,19 @@ static void __exit infinipath_cleanup(void)
 			} else
 				ipath_dbg("irq is 0, not doing free_irq "
 					  "for unit %u\n", dd->ipath_unit);
-			dd->pcidev = NULL;
-		}
 
-		/*
-		 * we check for NULL here, because it's outside the kregbase
-		 * check, and we need to call it after the free_irq.  Thus
-		 * it's possible that the function pointers were never
-		 * initialized.
-		 */
-		if (dd->ipath_f_cleanup)
-			/* clean up chip-specific stuff */
-			dd->ipath_f_cleanup(dd);
+			/*
+			 * we check for NULL here, because it's outside
+			 * the kregbase check, and we need to call it
+			 * after the free_irq.  Thus it's possible that
+			 * the function pointers were never initialized.
+			 */
+			if (dd->ipath_f_cleanup)
+				/* clean up chip-specific stuff */
+				dd->ipath_f_cleanup(dd);
 
+			dd->pcidev = NULL;
+		}
 		spin_lock_irqsave(&ipath_devs_lock, flags);
 	}
 

drivers/infiniband/hw/ipath/ipath_eeprom.c

@@ -505,11 +505,10 @@ static u8 flash_csum(struct ipath_flash *ifp, int adjust)
  * ipath_get_guid - get the GUID from the i2c device
  * @dd: the infinipath device
  *
- * When we add the multi-chip support, we will probably have to add
- * the ability to use the number of guids field, and get the guid from
- * the first chip's flash, to use for all of them.
+ * We have the capability to use the ipath_nguid field, and get
+ * the guid from the first chip's flash, to use for all of them.
  */
-void ipath_get_guid(struct ipath_devdata *dd)
+void ipath_get_eeprom_info(struct ipath_devdata *dd)
 {
 	void *buf;
 	struct ipath_flash *ifp;

drivers/infiniband/hw/ipath/ipath_file_ops.c

@@ -139,7 +139,7 @@ static int ipath_get_base_info(struct ipath_portdata *pd,
 	kinfo->spi_piosize = dd->ipath_ibmaxlen;
 	kinfo->spi_mtu = dd->ipath_ibmaxlen;	/* maxlen, not ibmtu */
 	kinfo->spi_port = pd->port_port;
-	kinfo->spi_sw_version = IPATH_USER_SWVERSION;
+	kinfo->spi_sw_version = IPATH_KERN_SWVERSION;
 	kinfo->spi_hw_version = dd->ipath_revision;
 
 	if (copy_to_user(ubase, kinfo, sizeof(*kinfo)))
@@ -1224,6 +1224,10 @@ static unsigned int ipath_poll(struct file *fp,
 
 	if (tail == head) {
 		set_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag);
+		if(dd->ipath_rhdrhead_intr_off) /* arm rcv interrupt */
+			(void)ipath_write_ureg(dd, ur_rcvhdrhead,
+					       dd->ipath_rhdrhead_intr_off
+					       | head, pd->port_port);
 		poll_wait(fp, &pd->port_wait, pt);
 
 		if (test_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag)) {

drivers/infiniband/hw/ipath/ipath_ht400.c

@@ -607,7 +607,12 @@ static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
 	case 4:		/* Ponderosa is one of the bringup boards */
 		n = "Ponderosa";
 		break;
-	case 5:		/* HT-460 original production board */
+	case 5:
+		/*
+		 * HT-460 original production board; two production levels, with
+		 * different serial number ranges.   See ipath_ht_early_init() for
+		 * case where we enable IPATH_GPIO_INTR for later serial # range.
+		 */
 		n = "InfiniPath_HT-460";
 		break;
 	case 6:
@@ -642,7 +647,7 @@ static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
 	if (n)
 		snprintf(name, namelen, "%s", n);
 
-	if (dd->ipath_majrev != 3 || dd->ipath_minrev != 2) {
+	if (dd->ipath_majrev != 3 || (dd->ipath_minrev < 2 || dd->ipath_minrev > 3)) {
 		/*
 		 * This version of the driver only supports the HT-400
 		 * Rev 3.2
@@ -1520,6 +1525,18 @@ static int ipath_ht_early_init(struct ipath_devdata *dd)
 	 */
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
 			 INFINIPATH_S_ABORT);
+
+	ipath_get_eeprom_info(dd);
+	if(dd->ipath_boardrev == 5 && dd->ipath_serial[0] == '1' &&
+		dd->ipath_serial[1] == '2' && dd->ipath_serial[2] == '8') {
+		/*
+		 * Later production HT-460 has same changes as HT-465, so
+		 * can use GPIO interrupts.  They have serial #'s starting
+		 * with 128, rather than 112.
+		 */
+		dd->ipath_flags |= IPATH_GPIO_INTR;
+		dd->ipath_flags &= ~IPATH_POLL_RX_INTR;
+	}
 	return 0;
 }
 

drivers/infiniband/hw/ipath/ipath_init_chip.c

@@ -879,7 +879,6 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
 
 done:
 	if (!ret) {
-		ipath_get_guid(dd);
 		*dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;
 		if (!dd->ipath_f_intrsetup(dd)) {
 			/* now we can enable all interrupts from the chip */

drivers/infiniband/hw/ipath/ipath_kernel.h

@@ -650,7 +650,7 @@ u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32 *);
 void ipath_init_pe800_funcs(struct ipath_devdata *);
 /* init HT-400-specific func */
 void ipath_init_ht400_funcs(struct ipath_devdata *);
-void ipath_get_guid(struct ipath_devdata *);
+void ipath_get_eeprom_info(struct ipath_devdata *);
 u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg);
 
 /*

drivers/infiniband/hw/ipath/ipath_keys.c

@@ -136,9 +136,7 @@ int ipath_lkey_ok(struct ipath_lkey_table *rkt, struct ipath_sge *isge,
 		ret = 1;
 		goto bail;
 	}
-	spin_lock(&rkt->lock);
 	mr = rkt->table[(sge->lkey >> (32 - ib_ipath_lkey_table_size))];
-	spin_unlock(&rkt->lock);
 	if (unlikely(mr == NULL || mr->lkey != sge->lkey)) {
 		ret = 0;
 		goto bail;
@@ -184,8 +182,6 @@ int ipath_lkey_ok(struct ipath_lkey_table *rkt, struct ipath_sge *isge,
  * @acc: access flags
  *
  * Return 1 if successful, otherwise 0.
- *
- * The QP r_rq.lock should be held.
  */
 int ipath_rkey_ok(struct ipath_ibdev *dev, struct ipath_sge_state *ss,
 		  u32 len, u64 vaddr, u32 rkey, int acc)
@@ -196,9 +192,7 @@ int ipath_rkey_ok(struct ipath_ibdev *dev, struct ipath_sge_state *ss,
 	size_t off;
 	int ret;
 
-	spin_lock(&rkt->lock);
 	mr = rkt->table[(rkey >> (32 - ib_ipath_lkey_table_size))];
-	spin_unlock(&rkt->lock);
 	if (unlikely(mr == NULL || mr->lkey != rkey)) {
 		ret = 0;
 		goto bail;

drivers/infiniband/hw/ipath/ipath_layer.c

@@ -872,12 +872,13 @@ static void copy_io(u32 __iomem *piobuf, struct ipath_sge_state *ss,
 		update_sge(ss, len);
 		length -= len;
 	}
+	/* Update address before sending packet. */
+	update_sge(ss, length);
 	/* must flush early everything before trigger word */
 	ipath_flush_wc();
 	__raw_writel(last, piobuf);
 	/* be sure trigger word is written */
 	ipath_flush_wc();
-	update_sge(ss, length);
 }
 
 /**
@@ -943,17 +944,18 @@ int ipath_verbs_send(struct ipath_devdata *dd, u32 hdrwords,
 	if (likely(ss->num_sge == 1 && len <= ss->sge.length &&
 		   !((unsigned long)ss->sge.vaddr & (sizeof(u32) - 1)))) {
 		u32 w;
+		u32 *addr = (u32 *) ss->sge.vaddr;
 
+		/* Update address before sending packet. */
+		update_sge(ss, len);
 		/* Need to round up for the last dword in the packet. */
 		w = (len + 3) >> 2;
-		__iowrite32_copy(piobuf, ss->sge.vaddr, w - 1);
+		__iowrite32_copy(piobuf, addr, w - 1);
 		/* must flush early everything before trigger word */
 		ipath_flush_wc();
-		__raw_writel(((u32 *) ss->sge.vaddr)[w - 1],
-			     piobuf + w - 1);
+		__raw_writel(addr[w - 1], piobuf + w - 1);
 		/* be sure trigger word is written */
 		ipath_flush_wc();
-		update_sge(ss, len);
 		ret = 0;
 		goto bail;
 	}

drivers/infiniband/hw/ipath/ipath_pe800.c

@@ -1180,6 +1180,8 @@ static int ipath_pe_early_init(struct ipath_devdata *dd)
 	 */
 	dd->ipath_rhdrhead_intr_off = 1ULL<<32;
 
+	ipath_get_eeprom_info(dd);
+
 	return 0;
 }
 

drivers/infiniband/hw/ipath/ipath_qp.c

@@ -375,10 +375,10 @@ static void ipath_error_qp(struct ipath_qp *qp)
 
 	spin_lock(&dev->pending_lock);
 	/* XXX What if its already removed by the timeout code? */
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
-	if (qp->piowait.next != LIST_POISON1)
-		list_del(&qp->piowait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
+	if (!list_empty(&qp->piowait))
+		list_del_init(&qp->piowait);
 	spin_unlock(&dev->pending_lock);
 
 	wc.status = IB_WC_WR_FLUSH_ERR;
@@ -427,6 +427,7 @@ static void ipath_error_qp(struct ipath_qp *qp)
 int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 		    int attr_mask)
 {
+	struct ipath_ibdev *dev = to_idev(ibqp->device);
 	struct ipath_qp *qp = to_iqp(ibqp);
 	enum ib_qp_state cur_state, new_state;
 	unsigned long flags;
@@ -443,6 +444,19 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 				attr_mask))
 		goto inval;
 
+	if (attr_mask & IB_QP_AV)
+		if (attr->ah_attr.dlid == 0 ||
+		    attr->ah_attr.dlid >= IPS_MULTICAST_LID_BASE)
+			goto inval;
+
+	if (attr_mask & IB_QP_PKEY_INDEX)
+		if (attr->pkey_index >= ipath_layer_get_npkeys(dev->dd))
+			goto inval;
+
+	if (attr_mask & IB_QP_MIN_RNR_TIMER)
+		if (attr->min_rnr_timer > 31)
+			goto inval;
+
 	switch (new_state) {
 	case IB_QPS_RESET:
 		ipath_reset_qp(qp);
@@ -457,13 +471,8 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 
 	}
 
-	if (attr_mask & IB_QP_PKEY_INDEX) {
-		struct ipath_ibdev *dev = to_idev(ibqp->device);
-
-		if (attr->pkey_index >= ipath_layer_get_npkeys(dev->dd))
-			goto inval;
+	if (attr_mask & IB_QP_PKEY_INDEX)
 		qp->s_pkey_index = attr->pkey_index;
-	}
 
 	if (attr_mask & IB_QP_DEST_QPN)
 		qp->remote_qpn = attr->dest_qp_num;
@@ -479,12 +488,8 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 	if (attr_mask & IB_QP_ACCESS_FLAGS)
 		qp->qp_access_flags = attr->qp_access_flags;
 
-	if (attr_mask & IB_QP_AV) {
-		if (attr->ah_attr.dlid == 0 ||
-		    attr->ah_attr.dlid >= IPS_MULTICAST_LID_BASE)
-			goto inval;
+	if (attr_mask & IB_QP_AV)
 		qp->remote_ah_attr = attr->ah_attr;
-	}
 
 	if (attr_mask & IB_QP_PATH_MTU)
 		qp->path_mtu = attr->path_mtu;
@@ -499,11 +504,8 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 		qp->s_rnr_retry_cnt = qp->s_rnr_retry;
 	}
 
-	if (attr_mask & IB_QP_MIN_RNR_TIMER) {
-		if (attr->min_rnr_timer > 31)
-			goto inval;
+	if (attr_mask & IB_QP_MIN_RNR_TIMER)
 		qp->s_min_rnr_timer = attr->min_rnr_timer;
-	}
 
 	if (attr_mask & IB_QP_QKEY)
 		qp->qkey = attr->qkey;
@@ -710,10 +712,8 @@ struct ib_qp *ipath_create_qp(struct ib_pd *ibpd,
 			     init_attr->qp_type == IB_QPT_RC ?
 			     ipath_do_rc_send : ipath_do_uc_send,
 			     (unsigned long)qp);
-		qp->piowait.next = LIST_POISON1;
-		qp->piowait.prev = LIST_POISON2;
-		qp->timerwait.next = LIST_POISON1;
-		qp->timerwait.prev = LIST_POISON2;
+		INIT_LIST_HEAD(&qp->piowait);
+		INIT_LIST_HEAD(&qp->timerwait);
 		qp->state = IB_QPS_RESET;
 		qp->s_wq = swq;
 		qp->s_size = init_attr->cap.max_send_wr + 1;
@@ -734,7 +734,7 @@ struct ib_qp *ipath_create_qp(struct ib_pd *ibpd,
 		ipath_reset_qp(qp);
 
 		/* Tell the core driver that the kernel SMA is present. */
-		if (qp->ibqp.qp_type == IB_QPT_SMI)
+		if (init_attr->qp_type == IB_QPT_SMI)
 			ipath_layer_set_verbs_flags(dev->dd,
 						    IPATH_VERBS_KERNEL_SMA);
 		break;
@@ -783,10 +783,10 @@ int ipath_destroy_qp(struct ib_qp *ibqp)
 
 	/* Make sure the QP isn't on the timeout list. */
 	spin_lock_irqsave(&dev->pending_lock, flags);
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
-	if (qp->piowait.next != LIST_POISON1)
-		list_del(&qp->piowait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
+	if (!list_empty(&qp->piowait))
+		list_del_init(&qp->piowait);
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 
 	/*
@@ -855,10 +855,10 @@ void ipath_sqerror_qp(struct ipath_qp *qp, struct ib_wc *wc)
 
 	spin_lock(&dev->pending_lock);
 	/* XXX What if its already removed by the timeout code? */
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
-	if (qp->piowait.next != LIST_POISON1)
-		list_del(&qp->piowait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
+	if (!list_empty(&qp->piowait))
+		list_del_init(&qp->piowait);
 	spin_unlock(&dev->pending_lock);
 
 	ipath_cq_enter(to_icq(qp->ibqp.send_cq), wc, 1);

drivers/infiniband/hw/ipath/ipath_rc.c

@@ -57,7 +57,7 @@ static void ipath_init_restart(struct ipath_qp *qp, struct ipath_swqe *wqe)
 	qp->s_len = wqe->length - len;
 	dev = to_idev(qp->ibqp.device);
 	spin_lock(&dev->pending_lock);
-	if (qp->timerwait.next == LIST_POISON1)
+	if (list_empty(&qp->timerwait))
 		list_add_tail(&qp->timerwait,
 			      &dev->pending[dev->pending_index]);
 	spin_unlock(&dev->pending_lock);
@@ -356,7 +356,7 @@ static inline int ipath_make_rc_req(struct ipath_qp *qp,
 		if ((int)(qp->s_psn - qp->s_next_psn) > 0)
 			qp->s_next_psn = qp->s_psn;
 		spin_lock(&dev->pending_lock);
-		if (qp->timerwait.next == LIST_POISON1)
+		if (list_empty(&qp->timerwait))
 			list_add_tail(&qp->timerwait,
 				      &dev->pending[dev->pending_index]);
 		spin_unlock(&dev->pending_lock);
@@ -726,8 +726,8 @@ void ipath_restart_rc(struct ipath_qp *qp, u32 psn, struct ib_wc *wc)
 	 */
 	dev = to_idev(qp->ibqp.device);
 	spin_lock(&dev->pending_lock);
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
 	spin_unlock(&dev->pending_lock);
 
 	if (wqe->wr.opcode == IB_WR_RDMA_READ)
@@ -886,8 +886,8 @@ static int do_rc_ack(struct ipath_qp *qp, u32 aeth, u32 psn, int opcode)
 	 * just won't find anything to restart if we ACK everything.
 	 */
 	spin_lock(&dev->pending_lock);
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
 	spin_unlock(&dev->pending_lock);
 
 	/*
@@ -1194,8 +1194,7 @@ static inline void ipath_rc_rcv_resp(struct ipath_ibdev *dev,
 		     IB_WR_RDMA_READ))
 		goto ack_done;
 	spin_lock(&dev->pending_lock);
-	if (qp->s_rnr_timeout == 0 &&
-	    qp->timerwait.next != LIST_POISON1)
+	if (qp->s_rnr_timeout == 0 && !list_empty(&qp->timerwait))
 		list_move_tail(&qp->timerwait,
 			       &dev->pending[dev->pending_index]);
 	spin_unlock(&dev->pending_lock);

drivers/infiniband/hw/ipath/ipath_ruc.c

@@ -435,7 +435,7 @@ void ipath_no_bufs_available(struct ipath_qp *qp, struct ipath_ibdev *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->pending_lock, flags);
-	if (qp->piowait.next == LIST_POISON1)
+	if (list_empty(&qp->piowait))
 		list_add_tail(&qp->piowait, &dev->piowait);
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 	/*

drivers/infiniband/hw/ipath/ipath_verbs.c

@@ -464,7 +464,7 @@ static void ipath_ib_timer(void *arg)
 	last = &dev->pending[dev->pending_index];
 	while (!list_empty(last)) {
 		qp = list_entry(last->next, struct ipath_qp, timerwait);
-		list_del(&qp->timerwait);
+		list_del_init(&qp->timerwait);
 		qp->timer_next = resend;
 		resend = qp;
 		atomic_inc(&qp->refcount);
@@ -474,7 +474,7 @@ static void ipath_ib_timer(void *arg)
 		qp = list_entry(last->next, struct ipath_qp, timerwait);
 		if (--qp->s_rnr_timeout == 0) {
 			do {
-				list_del(&qp->timerwait);
+				list_del_init(&qp->timerwait);
 				tasklet_hi_schedule(&qp->s_task);
 				if (list_empty(last))
 					break;
@@ -554,7 +554,7 @@ static int ipath_ib_piobufavail(void *arg)
 	while (!list_empty(&dev->piowait)) {
 		qp = list_entry(dev->piowait.next, struct ipath_qp,
 				piowait);
-		list_del(&qp->piowait);
+		list_del_init(&qp->piowait);
 		tasklet_hi_schedule(&qp->s_task);
 	}
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
@@ -951,6 +951,7 @@ static void *ipath_register_ib_device(int unit, struct ipath_devdata *dd)
 	idev->dd = dd;
 
 	strlcpy(dev->name, "ipath%d", IB_DEVICE_NAME_MAX);
+	dev->owner = THIS_MODULE;
 	dev->node_guid = ipath_layer_get_guid(dd);
 	dev->uverbs_abi_ver = IPATH_UVERBS_ABI_VERSION;
 	dev->uverbs_cmd_mask =

drivers/infiniband/hw/mthca/mthca_srq.c

@@ -490,26 +490,7 @@ int mthca_tavor_post_srq_recv(struct ib_srq *ibsrq, struct ib_recv_wr *wr,
 
 	first_ind = srq->first_free;
 
-	for (nreq = 0; wr; ++nreq, wr = wr->next) {
-		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
-			nreq = 0;
-
-			doorbell[0] = cpu_to_be32(first_ind << srq->wqe_shift);
-			doorbell[1] = cpu_to_be32(srq->srqn << 8);
-
-			/*
-			 * Make sure that descriptors are written
-			 * before doorbell is rung.
-			 */
-			wmb();
-
-			mthca_write64(doorbell,
-				      dev->kar + MTHCA_RECEIVE_DOORBELL,
-				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
-
-			first_ind = srq->first_free;
-		}
-
+	for (nreq = 0; wr; wr = wr->next) {
 		ind = srq->first_free;
 
 		if (ind < 0) {
@@ -569,6 +550,26 @@ int mthca_tavor_post_srq_recv(struct ib_srq *ibsrq, struct ib_recv_wr *wr,
 
 		srq->wrid[ind]  = wr->wr_id;
 		srq->first_free = next_ind;
+
+		++nreq;
+		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
+			nreq = 0;
+
+			doorbell[0] = cpu_to_be32(first_ind << srq->wqe_shift);
+			doorbell[1] = cpu_to_be32(srq->srqn << 8);
+
+			/*
+			 * Make sure that descriptors are written
+			 * before doorbell is rung.
+			 */
+			wmb();
+
+			mthca_write64(doorbell,
+				      dev->kar + MTHCA_RECEIVE_DOORBELL,
+				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
+
+			first_ind = srq->first_free;
+		}
 	}
 
 	if (likely(nreq)) {

drivers/input/touchscreen/ads7846.c

@@ -36,13 +36,10 @@
 
 
 /*
- * This code has been tested on an ads7846 / N770 device.
+ * This code has been heavily tested on a Nokia 770, and lightly
+ * tested on other ads7846 devices (OSK/Mistral, Lubbock).
  * Support for ads7843 and ads7845 has only been stubbed in.
  *
- * Not yet done:  How accurate are the temperature and voltage
- * readings? (System-specific calibration should support
- * accuracy of 0.3 degrees C; otherwise it's 2.0 degrees.)
- *
  * IRQ handling needs a workaround because of a shortcoming in handling
  * edge triggered IRQs on some platforms like the OMAP1/2. These
  * platforms don't handle the ARM lazy IRQ disabling properly, thus we
@@ -248,10 +245,13 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 
 	if (req->msg.status)
 		status = req->msg.status;
+
+	/* on-wire is a must-ignore bit, a BE12 value, then padding */
 	sample = be16_to_cpu(req->sample);
-	sample = sample >> 4;
-	kfree(req);
+	sample = sample >> 3;
+	sample &= 0x0fff;
 
+	kfree(req);
 	return status ? status : sample;
 }
 
@@ -336,13 +336,13 @@ static void ads7846_rx(void *ads)
 	u16			x, y, z1, z2;
 	unsigned long		flags;
 
-	/* adjust:  12 bit samples (left aligned), built from
-	 * two 8 bit values writen msb-first.
+	/* adjust:  on-wire is a must-ignore bit, a BE12 value, then padding;
+	 * built from two 8 bit values written msb-first.
 	 */
-	x = be16_to_cpu(ts->tc.x) >> 4;
-	y = be16_to_cpu(ts->tc.y) >> 4;
-	z1 = be16_to_cpu(ts->tc.z1) >> 4;
-	z2 = be16_to_cpu(ts->tc.z2) >> 4;
+	x = (be16_to_cpu(ts->tc.x) >> 3) & 0x0fff;
+	y = (be16_to_cpu(ts->tc.y) >> 3) & 0x0fff;
+	z1 = (be16_to_cpu(ts->tc.z1) >> 3) & 0x0fff;
+	z2 = (be16_to_cpu(ts->tc.z2) >> 3) & 0x0fff;
 
 	/* range filtering */
 	if (x == MAX_12BIT)
@@ -420,7 +420,7 @@ static void ads7846_debounce(void *ads)
 
 	m = &ts->msg[ts->msg_idx];
 	t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
-	val = (*(u16 *)t->rx_buf) >> 3;
+	val = (be16_to_cpu(*(__be16 *)t->rx_buf) >> 3) & 0x0fff;
 	if (!ts->read_cnt || (abs(ts->last_read - val) > ts->debounce_tol)) {
 		/* Repeat it, if this was the first read or the read
 		 * wasn't consistent enough. */
@@ -469,7 +469,7 @@ static void ads7846_timer(unsigned long handle)
 	spin_lock_irq(&ts->lock);
 
 	if (unlikely(ts->msg_idx && !ts->pendown)) {
-		/* measurment cycle ended */
+		/* measurement cycle ended */
 		if (!device_suspended(&ts->spi->dev)) {
 			ts->irq_disabled = 0;
 			enable_irq(ts->spi->irq);
@@ -495,11 +495,10 @@ static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs)
 	spin_lock_irqsave(&ts->lock, flags);
 	if (likely(ts->get_pendown_state())) {
 		if (!ts->irq_disabled) {
-			/* REVISIT irq logic for many ARM chips has cloned a
-			 * bug wherein disabling an irq in its handler won't
-			 * work;(it's disabled lazily, and too late to work.
-			 * until all their irq logic is fixed, we must shadow
-			 * that state here.
+			/* The ARM do_simple_IRQ() dispatcher doesn't act
+			 * like the other dispatchers:  it will report IRQs
+			 * even after they've been disabled.  We work around
+			 * that here.  (The "generic irq" framework may help...)
 			 */
 			ts->irq_disabled = 1;
 			disable_irq(ts->spi->irq);
@@ -609,16 +608,20 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
+	/* REVISIT when the irq can be triggered active-low, or if for some
+	 * reason the touchscreen isn't hooked up, we don't need to access
+	 * the pendown state.
+	 */
 	if (pdata->get_pendown_state == NULL) {
 		dev_dbg(&spi->dev, "no get_pendown_state function?\n");
 		return -EINVAL;
 	}
 
-	/* We'd set the wordsize to 12 bits ... except that some controllers
-	 * will then treat the 8 bit command words as 12 bits (and drop the
-	 * four MSBs of the 12 bit result).  Result: inputs must be shifted
-	 * to discard the four garbage LSBs.
+	/* We'd set TX wordsize 8 bits and RX wordsize to 13 bits ... except
+	 * that even if the hardware can do that, the SPI controller driver
+	 * may not.  So we stick to very-portable 8 bit words, both RX and TX.
 	 */
+	spi->bits_per_word = 8;
 
 	ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
 	input_dev = input_allocate_device();
@@ -772,7 +775,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
 	if (request_irq(spi->irq, ads7846_irq,
 			SA_SAMPLE_RANDOM | SA_TRIGGER_FALLING,
-			spi->dev.bus_id, ts)) {
+			spi->dev.driver->name, ts)) {
 		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
 		err = -EBUSY;
 		goto err_free_mem;

drivers/md/md.c

@@ -5028,8 +5028,10 @@ static int md_notify_reboot(struct notifier_block *this,
 		printk(KERN_INFO "md: stopping all md devices.\n");
 
 		ITERATE_MDDEV(mddev,tmp)
-			if (mddev_trylock(mddev))
+			if (mddev_trylock(mddev)) {
 				do_md_stop (mddev, 1);
+				mddev_unlock(mddev);
+			}
 		/*
 		 * certain more exotic SCSI devices are known to be
 		 * volatile wrt too early system reboots. While the

drivers/media/common/Kconfig

 config VIDEO_SAA7146
 	tristate
-	select I2C
+	depends on I2C
 
 config VIDEO_SAA7146_VV
 	tristate

drivers/media/dvb/pluto2/Kconfig

 config DVB_PLUTO2
 	tristate "Pluto2 cards"
 	depends on DVB_CORE && PCI && I2C
-	select I2C
 	select I2C_ALGOBIT
 	select DVB_TDA1004X
 	help

drivers/mmc/mmc_block.c

@@ -353,7 +353,7 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
 			 */
 			printk(KERN_ERR "%s: unable to select block size for "
 				"writing (rb%u wb%u rp%u wp%u)\n",
-				md->disk->disk_name,
+				mmc_card_id(card),
 				1 << card->csd.read_blkbits,
 				1 << card->csd.write_blkbits,
 				card->csd.read_partial,

drivers/net/irda/Kconfig

@@ -33,7 +33,7 @@ config DONGLE
 
 config ESI_DONGLE
 	tristate "ESI JetEye PC dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Extended Systems
 	  JetEye PC dongle.  To compile it as a module, choose M here. The ESI
@@ -44,7 +44,7 @@ config ESI_DONGLE
 
 config ACTISYS_DONGLE
 	tristate "ACTiSYS IR-220L and IR220L+ dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the ACTiSYS IR-220L and
 	  IR220L+ dongles.  To compile it as a module, choose M here. The
@@ -55,7 +55,7 @@ config ACTISYS_DONGLE
 
 config TEKRAM_DONGLE
 	tristate "Tekram IrMate 210B dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Tekram IrMate 210B
 	  dongle.  To compile it as a module, choose M here. The Tekram dongle
@@ -66,7 +66,7 @@ config TEKRAM_DONGLE
 
 config TOIM3232_DONGLE
 	tristate "TOIM3232 IrDa dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Vishay/Temic
 	  TOIM3232 and TOIM4232 based dongles.
@@ -74,7 +74,7 @@ config TOIM3232_DONGLE
 
 config LITELINK_DONGLE
 	tristate "Parallax LiteLink dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Parallax Litelink
 	  dongle.  To compile it as a module, choose M here.  The Parallax
@@ -85,7 +85,7 @@ config LITELINK_DONGLE
 
 config MA600_DONGLE
 	tristate "Mobile Action MA600 dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Mobile Action MA600
 	  dongle.  To compile it as a module, choose M here. The MA600 dongle
@@ -98,7 +98,7 @@ config MA600_DONGLE
 
 config GIRBIL_DONGLE
 	tristate "Greenwich GIrBIL dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Greenwich GIrBIL
 	  dongle.  If you want to compile it as a module, choose M here.
@@ -109,7 +109,7 @@ config GIRBIL_DONGLE
 
 config MCP2120_DONGLE
 	tristate "Microchip MCP2120"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Microchip MCP2120
 	  dongle.  If you want to compile it as a module, choose M here.
@@ -123,7 +123,7 @@ config MCP2120_DONGLE
 
 config OLD_BELKIN_DONGLE
 	tristate "Old Belkin dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Adaptec Airport 1000
 	  and 2000 dongles.  If you want to compile it as a module, choose
@@ -132,7 +132,7 @@ config OLD_BELKIN_DONGLE
 
 config ACT200L_DONGLE
 	tristate "ACTiSYS IR-200L dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the ACTiSYS IR-200L
 	  dongle. If you want to compile it as a module, choose M here.

drivers/net/wireless/arlan-main.c

@@ -1838,7 +1838,7 @@ struct net_device * __init arlan_probe(int unit)
 }
 
 #ifdef  MODULE
-int init_module(void)
+int __init init_module(void)
 {
 	int i = 0;
 
@@ -1860,7 +1860,7 @@ int init_module(void)
 }
 
 
-void cleanup_module(void)
+void __exit cleanup_module(void)
 {
 	int i = 0;
 	struct net_device *dev;

drivers/net/wireless/wavelan.c

@@ -4306,7 +4306,7 @@ struct net_device * __init wavelan_probe(int unit)
  * Insertion of the module
  * I'm now quite proud of the multi-device support.
  */
-int init_module(void)
+int __init init_module(void)
 {
 	int ret = -EIO;		/* Return error if no cards found */
 	int i;

drivers/scsi/libata-core.c

@@ -3643,6 +3643,8 @@ static void ata_pio_block(struct ata_port *ap)
 
 		ata_pio_sector(qc);
 	}
+
+	ata_altstatus(ap); /* flush */
 }
 
 static void ata_pio_error(struct ata_port *ap)
@@ -3759,11 +3761,14 @@ static void atapi_packet_task(void *_data)
 		spin_lock_irqsave(&ap->host_set->lock, flags);
 		ap->flags &= ~ATA_FLAG_NOINTR;
 		ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
+		ata_altstatus(ap); /* flush */
+
 		if (qc->tf.protocol == ATA_PROT_ATAPI_DMA)
 			ap->ops->bmdma_start(qc);	/* initiate bmdma */
 		spin_unlock_irqrestore(&ap->host_set->lock, flags);
 	} else {
 		ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
+		ata_altstatus(ap); /* flush */
 
 		/* PIO commands are handled by polling */
 		ap->hsm_task_state = HSM_ST;

drivers/spi/spi_s3c24xx.c

@@ -405,7 +405,7 @@ static int s3c24xx_spi_remove(struct platform_device *dev)
 
 static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
 {
-	struct s3c24xx_spi *hw = platform_get_drvdata(dev);
+	struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
 
 	clk_disable(hw->clk);
 	return 0;
@@ -413,7 +413,7 @@ static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
 
 static int s3c24xx_spi_resume(struct platform_device *pdev)
 {
-	struct s3c24xx_spi *hw = platform_get_drvdata(dev);
+	struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
 
 	clk_enable(hw->clk);
 	return 0;

fs/affs/namei.c

@@ -416,10 +416,9 @@ affs_rename(struct inode *old_dir, struct dentry *old_dentry,
 			return retval;
 	}
 
-	retval = -EIO;
 	bh = affs_bread(sb, old_dentry->d_inode->i_ino);
 	if (!bh)
-		goto done;
+		return -EIO;
 
 	/* Remove header from its parent directory. */
 	affs_lock_dir(old_dir);

fs/jfs/jfs_metapage.c

@@ -542,7 +542,7 @@ static int metapage_readpage(struct file *fp, struct page *page)
 static int metapage_releasepage(struct page *page, gfp_t gfp_mask)
 {
 	struct metapage *mp;
-	int busy = 0;
+	int ret = 1;
 	unsigned int offset;
 
 	for (offset = 0; offset < PAGE_CACHE_SIZE; offset += PSIZE) {
@@ -552,30 +552,20 @@ static int metapage_releasepage(struct page *page, gfp_t gfp_mask)
 			continue;
 
 		jfs_info("metapage_releasepage: mp = 0x%p", mp);
-		if (mp->count || mp->nohomeok) {
+		if (mp->count || mp->nohomeok ||
+		    test_bit(META_dirty, &mp->flag)) {
 			jfs_info("count = %ld, nohomeok = %d", mp->count,
 				 mp->nohomeok);
-			busy = 1;
+			ret = 0;
 			continue;
 		}
-		wait_on_page_writeback(page);
-		//WARN_ON(test_bit(META_dirty, &mp->flag));
-		if (test_bit(META_dirty, &mp->flag)) {
-			dump_mem("dirty mp in metapage_releasepage", mp,
-				 sizeof(struct metapage));
-			dump_mem("page", page, sizeof(struct page));
-			dump_stack();
-		}
 		if (mp->lsn)
 			remove_from_logsync(mp);
 		remove_metapage(page, mp);
 		INCREMENT(mpStat.pagefree);
 		free_metapage(mp);
 	}
-	if (busy)
-		return -1;
-
-	return 0;
+	return ret;
 }
 
 static void metapage_invalidatepage(struct page *page, unsigned long offset)

include/asm-alpha/termbits.h

@@ -148,6 +148,7 @@ struct termios {
 #define HUPCL	00040000
 
 #define CLOCAL	00100000
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
 #define CRTSCTS	  020000000000		/* flow control */
 
 /* c_lflag bits */

include/asm-powerpc/termbits.h

@@ -153,6 +153,7 @@ struct termios {
 #define HUPCL	00040000
 
 #define CLOCAL	00100000
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
 #define CRTSCTS	  020000000000		/* flow control */
 
 /* c_lflag bits */

net/core/dev.c

@@ -127,7 +127,7 @@
  *             sure which should go first, but I bet it won't make much
  *             difference if we are running VLANs.  The good news is that
  *             this protocol won't be in the list unless compiled in, so
- *             the average user (w/out VLANs) will not be adversly affected.
+ *             the average user (w/out VLANs) will not be adversely affected.
  *             --BLG
  *
  *		0800	IP
@@ -149,7 +149,7 @@ static struct list_head ptype_base[16];	/* 16 way hashed list */
 static struct list_head ptype_all;		/* Taps */
 
 /*
- * The @dev_base list is protected by @dev_base_lock and the rtln
+ * The @dev_base list is protected by @dev_base_lock and the rtnl
  * semaphore.
  *
  * Pure readers hold dev_base_lock for reading.
@@ -641,10 +641,12 @@ int dev_valid_name(const char *name)
  *	@name: name format string
  *
  *	Passed a format string - eg "lt%d" it will try and find a suitable
- *	id. Not efficient for many devices, not called a lot. The caller
- *	must hold the dev_base or rtnl lock while allocating the name and
- *	adding the device in order to avoid duplicates. Returns the number
- *	of the unit assigned or a negative errno code.
+ *	id. It scans list of devices to build up a free map, then chooses
+ *	the first empty slot. The caller must hold the dev_base or rtnl lock
+ *	while allocating the name and adding the device in order to avoid
+ *	duplicates.
+ *	Limited to bits_per_byte * page size devices (ie 32K on most platforms).
+ *	Returns the number of the unit assigned or a negative errno code.
  */
 
 int dev_alloc_name(struct net_device *dev, const char *name)
@@ -744,7 +746,7 @@ int dev_change_name(struct net_device *dev, char *newname)
 }
 
 /**
- *	netdev_features_change - device changes fatures
+ *	netdev_features_change - device changes features
  *	@dev: device to cause notification
  *
  *	Called to indicate a device has changed features.
@@ -2196,7 +2198,7 @@ int netdev_set_master(struct net_device *slave, struct net_device *master)
  *	@dev: device
  *	@inc: modifier
  *
- *	Add or remove promsicuity from a device. While the count in the device
+ *	Add or remove promiscuity from a device. While the count in the device
  *	remains above zero the interface remains promiscuous. Once it hits zero
  *	the device reverts back to normal filtering operation. A negative inc
  *	value is used to drop promiscuity on the device.
@@ -3122,7 +3124,7 @@ EXPORT_SYMBOL(alloc_netdev);
 void free_netdev(struct net_device *dev)
 {
 #ifdef CONFIG_SYSFS
-	/*  Compatiablity with error handling in drivers */
+	/*  Compatibility with error handling in drivers */
 	if (dev->reg_state == NETREG_UNINITIALIZED) {
 		kfree((char *)dev - dev->padded);
 		return;

net/ipv6/route.c

@@ -280,10 +280,13 @@ static int inline rt6_check_neigh(struct rt6_info *rt)
 {
 	struct neighbour *neigh = rt->rt6i_nexthop;
 	int m = 0;
-	if (neigh) {
+	if (rt->rt6i_flags & RTF_NONEXTHOP ||
+	    !(rt->rt6i_flags & RTF_GATEWAY))
+		m = 1;
+	else if (neigh) {
 		read_lock_bh(&neigh->lock);
 		if (neigh->nud_state & NUD_VALID)
-			m = 1;
+			m = 2;
 		read_unlock_bh(&neigh->lock);
 	}
 	return m;
@@ -292,15 +295,18 @@ static int inline rt6_check_neigh(struct rt6_info *rt)
 static int rt6_score_route(struct rt6_info *rt, int oif,
 			   int strict)
 {
-	int m = rt6_check_dev(rt, oif);
+	int m, n;
+		
+	m = rt6_check_dev(rt, oif);
 	if (!m && (strict & RT6_SELECT_F_IFACE))
 		return -1;
 #ifdef CONFIG_IPV6_ROUTER_PREF
 	m |= IPV6_DECODE_PREF(IPV6_EXTRACT_PREF(rt->rt6i_flags)) << 2;
 #endif
-	if (rt6_check_neigh(rt))
+	n = rt6_check_neigh(rt);
+	if (n > 1)
 		m |= 16;
-	else if (strict & RT6_SELECT_F_REACHABLE)
+	else if (!n && strict & RT6_SELECT_F_REACHABLE)
 		return -1;
 	return m;
 }