Commit cbf1455b authored by Tomi Valkeinen's avatar Tomi Valkeinen

OMAP: H4: Port the display driver to new DSS2

Port the old omapfb panel driver to DSS2. This patch changes the board
file only, the driver is ported in separate patch.
Acked-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
parent 14dd72d8
......@@ -40,6 +40,9 @@
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include "mux.h"
#include "control.h"
......@@ -157,17 +160,33 @@ static struct platform_device h4_kp_device = {
},
};
static struct platform_device h4_lcd_device = {
.name = "lcd_h4",
.id = -1,
};
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
&h4_kp_device,
};
static struct panel_generic_dpi_data h4_panel_data = {
.name = "h4",
};
static struct omap_dss_device h4_lcd_device = {
.name = "lcd",
.driver_name = "generic_dpi_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 16,
.data = &h4_panel_data,
};
static struct omap_dss_device *h4_dss_devices[] = {
&h4_lcd_device,
};
static struct omap_dss_board_info h4_dss_data = {
.num_devices = ARRAY_SIZE(h4_dss_devices),
.devices = h4_dss_devices,
.default_device = &h4_lcd_device,
};
/* 2420 Sysboot setup (2430 is different) */
static u32 get_sysboot_value(void)
{
......@@ -271,10 +290,6 @@ static void __init h4_init_flash(void)
h4_flash_resource.end = base + SZ_64M - 1;
}
static struct omap_lcd_config h4_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_usb_config h4_usb_config __initdata = {
/* S1.10 OFF -- usb "download port"
* usb0 switched to Mini-B port and isp1105 transceiver;
......@@ -286,10 +301,6 @@ static struct omap_usb_config h4_usb_config __initdata = {
.hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */
};
static struct omap_board_config_kernel h4_config[] __initdata = {
{ OMAP_TAG_LCD, &h4_lcd_config },
};
static void __init omap_h4_init_early(void)
{
omap2_init_common_infrastructure();
......@@ -331,9 +342,6 @@ static void __init omap_h4_init(void)
{
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
omap_board_config = h4_config;
omap_board_config_size = ARRAY_SIZE(h4_config);
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
......@@ -372,6 +380,8 @@ static void __init omap_h4_init(void)
omap2_usbfs_init(&h4_usb_config);
omap_serial_init();
h4_init_flash();
omap_display_init(&h4_dss_data);
}
static void __init omap_h4_map_io(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment