Skip to content

L
linux
Commit cbff3eb3 authored by Daein Moon's avatar Daein Moon Committed by Kukjin Kim
Browse files
Options

ARM: S5PV310: Support ethernet for SMDKV310 and SMDKC210 

This patch adds to support ethernet for SMDKV310 and SMDKC210 board.
  - define smc911x resources
  - define configurations of smc911x platform data
  - define platform device "smsc911x"
  - initialize srom controller for lan9215 chip
Signed-off-by: default avatarDaein Moon <moon9124@samsung.com>
Signed-off-by: default avatarSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 09596ba0
Hide whitespace changes
Inline Side-by-side
Showing with 122 additions and 0 deletions
arch/arm/mach-s5pv310/mach-smdkc210.c
View file @ cbff3eb3
......@@ -12,6 +12,8 @@
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
......@@ -23,6 +25,7 @@
#include <plat/sdhci.h>
#include <mach/map.h>
#include <mach/regs-srom.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
......@@ -105,6 +108,37 @@ static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
static struct resource smdkc210_smsc911x_resources[] = {
[0] = {
.start = S5PV310_PA_SROM_BANK(1),
.end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_EINT(5),
.end = IRQ_EINT(5),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
static struct smsc911x_platform_config smsc9215_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
.phy_interface = PHY_INTERFACE_MODE_MII,
.mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
};
static struct platform_device smdkc210_smsc911x = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources),
.resource = smdkc210_smsc911x_resources,
.dev = {
.platform_data = &smsc9215_config,
},
};
static struct platform_device *smdkc210_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
......@@ -112,8 +146,33 @@ static struct platform_device *smdkc210_devices[] __initdata = {
&s3c_device_hsmmc3,
&s3c_device_rtc,
&s3c_device_wdt,
&smdkc210_smsc911x,
};
static void __init smdkc210_smsc911x_init(void)
{
u32 cs1;
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S5PV310_SROM_BW) &
~(S5PV310_SROM_BW__CS_MASK <<
S5PV310_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) |
(1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) <<
S5PV310_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S5PV310_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) |
(0x9 << S5PV310_SROM_BCX__TACP__SHIFT) |
(0xc << S5PV310_SROM_BCX__TCAH__SHIFT) |
(0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) |
(0x6 << S5PV310_SROM_BCX__TACC__SHIFT) |
(0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) |
(0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1);
}
static void __init smdkc210_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
......@@ -123,6 +182,8 @@ static void __init smdkc210_map_io(void)
static void __init smdkc210_machine_init(void)
{
smdkc210_smsc911x_init();
s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
......
arch/arm/mach-s5pv310/mach-smdkv310.c
View file @ cbff3eb3
......@@ -12,6 +12,8 @@
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
......@@ -23,6 +25,7 @@
#include <plat/sdhci.h>
#include <mach/map.h>
#include <mach/regs-srom.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
......@@ -105,6 +108,37 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
static struct resource smdkv310_smsc911x_resources[] = {
[0] = {
.start = S5PV310_PA_SROM_BANK(1),
.end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_EINT(5),
.end = IRQ_EINT(5),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
static struct smsc911x_platform_config smsc9215_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
.phy_interface = PHY_INTERFACE_MODE_MII,
.mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
};
static struct platform_device smdkv310_smsc911x = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(smdkv310_smsc911x_resources),
.resource = smdkv310_smsc911x_resources,
.dev = {
.platform_data = &smsc9215_config,
},
};
static struct platform_device *smdkv310_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
......@@ -112,8 +146,33 @@ static struct platform_device *smdkv310_devices[] __initdata = {
&s3c_device_hsmmc3,
&s3c_device_rtc,
&s3c_device_wdt,
&smdkv310_smsc911x,
};
static void __init smdkv310_smsc911x_init(void)
{
u32 cs1;
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S5PV310_SROM_BW) &
~(S5PV310_SROM_BW__CS_MASK <<
S5PV310_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) |
(1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) <<
S5PV310_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S5PV310_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) |
(0x9 << S5PV310_SROM_BCX__TACP__SHIFT) |
(0xc << S5PV310_SROM_BCX__TCAH__SHIFT) |
(0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) |
(0x6 << S5PV310_SROM_BCX__TACC__SHIFT) |
(0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) |
(0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1);
}
static void __init smdkv310_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
......@@ -123,6 +182,8 @@ static void __init smdkv310_map_io(void)
static void __init smdkv310_machine_init(void)
{
smdkv310_smsc911x_init();
s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7