ARM: dts: imx6: Fix PCI GPIO reset polarity

The imx6 PCI driver ignores the GPIO polarity from 'reset-gpio' and
considers that the PCI reset is active low, unless the
property 'reset-gpio-active-high' is present.

Fix the device tree description by explicitly passing the
'GPIO_ACTIVE_LOW' flag to the 'reset-gpio' property.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6q-ba16.dtsi

@@ -321,7 +321,7 @@ rtc@32 {
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	fsl,tx-swing-full = <103>;
 	fsl,tx-swing-low = <103>;
 	status = "okay";

arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

@@ -435,7 +435,7 @@ MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 8 0>;
+	reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6q-novena.dts

@@ -446,7 +446,7 @@ lvds-channel@0 {
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie_novena>;
-	reset-gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-apf6dev.dtsi

@@ -232,7 +232,7 @@ &ipu1_di0_disp0 {
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio6 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi

@@ -335,7 +335,7 @@ &gpmi {
 };
 
 &pcie {
-	reset-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi

@@ -374,7 +374,7 @@ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 17 0>;
+	reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 

arch/arm/boot/dts/imx6sx-nitrogen6sx.dts

@@ -296,7 +296,7 @@ t_lcd: t_lcd_default {
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio4 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };