Commit cc29b3f3 authored by Dmitry Eremin-Solenikov's avatar Dmitry Eremin-Solenikov Committed by Luis Henriques

mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips

commit 89cf38dd upstream.

After '#echo mem > /sys/power/state' some devices can not be properly resumed
because apparently the MTD Partition Configuration Register has been reset
to default thus the rootfs cannot be mounted cleanly on resume.
An example of this can be found in the SA-1100 Developer's Manual at 9.5.3.3
where the second step of the Sleep Shutdown Sequence is described:
"An internal reset is applied to the SA-1100. All units are reset...".

As workaround we refresh the PCR value as done initially on chip setup.

This behavior and the fix are confirmed by our tests done on 2 different Zaurus
collie units with kernel 3.17.

Fixes: 812c5fa8: ("mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR")
Signed-off-by: default avatarDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: default avatarAndrea Adami <andrea.adami@gmail.com>
Signed-off-by: default avatarBrian Norris <computersforpeace@gmail.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
parent 5931c602
......@@ -2590,6 +2590,8 @@ static void cfi_intelext_resume(struct mtd_info *mtd)
/* Go to known state. Chip may have been power cycled */
if (chip->state == FL_PM_SUSPENDED) {
/* Refresh LH28F640BF Partition Config. Register */
fixup_LH28F640BF(mtd);
map_write(map, CMD(0xFF), cfi->chips[i].start);
chip->oldstate = chip->state = FL_READY;
wake_up(&chip->wq);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment