Skip to content

L
linux
Commit cc2b9554 authored by David Mosberger's avatar David Mosberger
Browse files
Options

Merge tiger.hpl.hp.com:/data1/bk/vanilla/linux-2.5 

into tiger.hpl.hp.com:/data1/bk/lia64/to-linus-2.5
parents 467578b9 560327eb
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 435 additions and 11278 deletions
arch/ia64/boot/bootloader.c
View file @ cc2b9554
......@@ -53,6 +53,15 @@ struct disk_stat {
#include "../kernel/fw-emu.c"
/*
* Set a break point on this function so that symbols are available to set breakpoints in
* the kernel being debugged.
*/
static void
debug_break (void)
{
}
static void
cons_write (const char *buf)
{
......@@ -187,6 +196,7 @@ _start (void)
ssc(0, (long) kpath, 0, 0, SSC_LOAD_SYMBOLS);
debug_break();
asm volatile ("mov sp=%2; mov r28=%1; br.sptk.few %0"
:: "b"(e_entry), "r"(bp), "r"(__pa(&stack)));
......
arch/ia64/ia32/binfmt_elf32.c
View file @ cc2b9554
......@@ -162,9 +162,11 @@ ia32_setup_arg_pages (struct linux_binprm *bprm)
{
unsigned long stack_base;
struct vm_area_struct *mpnt;
struct mm_struct *mm = current->mm;
int i;
stack_base = IA32_STACK_TOP - MAX_ARG_PAGES*PAGE_SIZE;
mm->arg_start = bprm->p + stack_base;
bprm->p += stack_base;
if (bprm->loader)
......@@ -175,6 +177,11 @@ ia32_setup_arg_pages (struct linux_binprm *bprm)
if (!mpnt)
return -ENOMEM;
if (!vm_enough_memory((IA32_STACK_TOP - (PAGE_MASK & (unsigned long) bprm->p))>>PAGE_SHIFT)) {
kmem_cache_free(vm_area_cachep, mpnt);
return -ENOMEM;
}
down_write(&current->mm->mmap_sem);
{
mpnt->vm_mm = current->mm;
......
arch/ia64/ia32/ia32_entry.S
View file @ cc2b9554
......@@ -196,7 +196,7 @@ ia32_syscall_table:
data8 sys32_fork
data8 sys_read
data8 sys_write
data8 sys_open /* 5 */
data8 sys32_open /* 5 */
data8 sys_close
data8 sys32_waitpid
data8 sys_creat
......
arch/ia64/ia32/ia32_signal.c
View file @ cc2b9554
......@@ -165,10 +165,10 @@ copy_siginfo_to_user32 (siginfo_t32 *to, siginfo_t *from)
* sw ar.fsr(0:15)
* tag ar.fsr(16:31) with odd numbered bits not used
* (read returns 0, writes ignored)
* ipoff ar.fir(0:31) RO
* cssel ar.fir(32:47) RO
* dataoff ar.fdr(0:31) RO
* datasel ar.fdr(32:47) RO
* ipoff ar.fir(0:31)
* cssel ar.fir(32:47)
* dataoff ar.fdr(0:31)
* datasel ar.fdr(32:47)
*
* _st[(0+TOS)%8] f8
* _st[(1+TOS)%8] f9 (f8, f9 from ptregs)
......@@ -328,7 +328,7 @@ restore_ia32_fpstate_live (struct _fpstate_ia32 *save)
unsigned long num64, mxcsr;
struct _fpreg_ia32 *fpregp;
char buf[32];
unsigned long fsr, fcr;
unsigned long fsr, fcr, fir, fdr;
int fp_tos, fr8_st_map;
if (!access_ok(VERIFY_READ, save, sizeof(*save)))
......@@ -345,6 +345,8 @@ restore_ia32_fpstate_live (struct _fpstate_ia32 *save)
*/
asm volatile ( "mov %0=ar.fsr;" : "=r"(fsr));
asm volatile ( "mov %0=ar.fcr;" : "=r"(fcr));
asm volatile ( "mov %0=ar.fir;" : "=r"(fir));
asm volatile ( "mov %0=ar.fdr;" : "=r"(fdr));
__get_user(mxcsr, (unsigned int *)&save->mxcsr);
/* setting bits 0..5 8..12 with cw and 39..47 from mxcsr */
......@@ -355,14 +357,34 @@ restore_ia32_fpstate_live (struct _fpstate_ia32 *save)
/* setting bits 0..31 with sw and tag and 32..37 from mxcsr */
__get_user(lo, (unsigned int *)&save->sw);
/* set bits 15,7 (fsw.b, fsw.es) to reflect the current error status */
if ( !(lo & 0x7f) )
lo &= (~0x8080);
__get_user(hi, (unsigned int *)&save->tag);
num64 = mxcsr & 0x3f;
num64 = (num64 << 16) | (hi & 0xffff);
num64 = (num64 << 16) | (lo & 0xffff);
fsr = (fsr & (~0x3fffffffff)) | num64;
/* setting bits 0..47 with cssel and ipoff */
__get_user(lo, (unsigned int *)&save->ipoff);
__get_user(hi, (unsigned int *)&save->cssel);
num64 = hi & 0xffff;
num64 = (num64 << 32) | lo;
fir = (fir & (~0xffffffffffff)) | num64;
/* setting bits 0..47 with datasel and dataoff */
__get_user(lo, (unsigned int *)&save->dataoff);
__get_user(hi, (unsigned int *)&save->datasel);
num64 = hi & 0xffff;
num64 = (num64 << 32) | lo;
fdr = (fdr & (~0xffffffffffff)) | num64;
asm volatile ( "mov ar.fsr=%0;" :: "r"(fsr));
asm volatile ( "mov ar.fcr=%0;" :: "r"(fcr));
asm volatile ( "mov ar.fir=%0;" :: "r"(fir));
asm volatile ( "mov ar.fdr=%0;" :: "r"(fdr));
/*
* restore f8, f9 onto pt_regs
* restore f10..f15 onto live registers
......
arch/ia64/ia32/sys_ia32.c
View file @ cc2b9554
......@@ -2898,57 +2898,152 @@ get_fpreg (int regno, struct _fpreg_ia32 *reg, struct pt_regs *ptp, struct switc
}
static int
save_ia32_fpstate (struct task_struct *tsk, struct _fpstate_ia32 *save)
save_ia32_fpstate (struct task_struct *tsk, struct ia32_user_i387_struct *save)
{
struct switch_stack *swp;
struct pt_regs *ptp;
int i, tos;
if (!access_ok(VERIFY_WRITE, save, sizeof(*save)))
return -EIO;
__put_user(tsk->thread.fcr, &save->cw);
__put_user(tsk->thread.fsr, &save->sw);
__put_user(tsk->thread.fsr >> 32, &save->tag);
__put_user(tsk->thread.fir, &save->ipoff);
__put_user(__USER_CS, &save->cssel);
__put_user(tsk->thread.fdr, &save->dataoff);
__put_user(__USER_DS, &save->datasel);
return -EFAULT;
__put_user(tsk->thread.fcr & 0xffff, &save->cwd);
__put_user(tsk->thread.fsr & 0xffff, &save->swd);
__put_user((tsk->thread.fsr>>16) & 0xffff, &save->twd);
__put_user(tsk->thread.fir, &save->fip);
__put_user((tsk->thread.fir>>32) & 0xffff, &save->fcs);
__put_user(tsk->thread.fdr, &save->foo);
__put_user((tsk->thread.fdr>>32) & 0xffff, &save->fos);
/*
* Stack frames start with 16-bytes of temp space
*/
swp = (struct switch_stack *)(tsk->thread.ksp + 16);
ptp = ia64_task_regs(tsk);
tos = (tsk->thread.fsr >> 11) & 3;
tos = (tsk->thread.fsr >> 11) & 7;
for (i = 0; i < 8; i++)
put_fpreg(i, &save->_st[i], ptp, swp, tos);
put_fpreg(i, (struct _fpreg_ia32 *)&save->st_space[4*i], ptp, swp, tos);
return 0;
}
static int
restore_ia32_fpstate (struct task_struct *tsk, struct _fpstate_ia32 *save)
restore_ia32_fpstate (struct task_struct *tsk, struct ia32_user_i387_struct *save)
{
struct switch_stack *swp;
struct pt_regs *ptp;
int i, tos, ret;
int fsrlo, fsrhi;
int i, tos;
unsigned int fsrlo, fsrhi, num32;
if (!access_ok(VERIFY_READ, save, sizeof(*save)))
return(-EIO);
ret = __get_user(tsk->thread.fcr, (unsigned int *)&save->cw);
ret |= __get_user(fsrlo, (unsigned int *)&save->sw);
ret |= __get_user(fsrhi, (unsigned int *)&save->tag);
tsk->thread.fsr = ((long)fsrhi << 32) | (long)fsrlo;
ret |= __get_user(tsk->thread.fir, (unsigned int *)&save->ipoff);
ret |= __get_user(tsk->thread.fdr, (unsigned int *)&save->dataoff);
return(-EFAULT);
__get_user(num32, (unsigned int *)&save->cwd);
tsk->thread.fcr = (tsk->thread.fcr & (~0x1f3f)) | (num32 & 0x1f3f);
__get_user(fsrlo, (unsigned int *)&save->swd);
__get_user(fsrhi, (unsigned int *)&save->twd);
num32 = (fsrhi << 16) | fsrlo;
tsk->thread.fsr = (tsk->thread.fsr & (~0xffffffff)) | num32;
__get_user(num32, (unsigned int *)&save->fip);
tsk->thread.fir = (tsk->thread.fir & (~0xffffffff)) | num32;
__get_user(num32, (unsigned int *)&save->foo);
tsk->thread.fdr = (tsk->thread.fdr & (~0xffffffff)) | num32;
/*
* Stack frames start with 16-bytes of temp space
*/
swp = (struct switch_stack *)(tsk->thread.ksp + 16);
ptp = ia64_task_regs(tsk);
tos = (tsk->thread.fsr >> 11) & 3;
tos = (tsk->thread.fsr >> 11) & 7;
for (i = 0; i < 8; i++)
get_fpreg(i, &save->_st[i], ptp, swp, tos);
return ret ? -EFAULT : 0;
get_fpreg(i, (struct _fpreg_ia32 *)&save->st_space[4*i], ptp, swp, tos);
return 0;
}
static int
save_ia32_fpxstate (struct task_struct *tsk, struct ia32_user_fxsr_struct *save)
{
struct switch_stack *swp;
struct pt_regs *ptp;
int i, tos;
unsigned long mxcsr=0;
unsigned long num128[2];
if (!access_ok(VERIFY_WRITE, save, sizeof(*save)))
return -EFAULT;
__put_user(tsk->thread.fcr & 0xffff, &save->cwd);
__put_user(tsk->thread.fsr & 0xffff, &save->swd);
__put_user((tsk->thread.fsr>>16) & 0xffff, &save->twd);
__put_user(tsk->thread.fir, &save->fip);
__put_user((tsk->thread.fir>>32) & 0xffff, &save->fcs);
__put_user(tsk->thread.fdr, &save->foo);
__put_user((tsk->thread.fdr>>32) & 0xffff, &save->fos);
/*
* Stack frames start with 16-bytes of temp space
*/
swp = (struct switch_stack *)(tsk->thread.ksp + 16);
ptp = ia64_task_regs(tsk);
tos = (tsk->thread.fsr >> 11) & 7;
for (i = 0; i < 8; i++)
put_fpreg(i, (struct _fpxreg_ia32 *)&save->st_space[4*i], ptp, swp, tos);
mxcsr = ((tsk->thread.fcr>>32) & 0xff80) | ((tsk->thread.fsr>>32) & 0x3f);
__put_user(mxcsr & 0xffff, &save->mxcsr);
for (i = 0; i < 8; i++) {
memcpy(&(num128[0]), &(swp->f16) + i*2, sizeof(unsigned long));
memcpy(&(num128[1]), &(swp->f17) + i*2, sizeof(unsigned long));
copy_to_user(&save->xmm_space[0] + 4*i, num128, sizeof(struct _xmmreg_ia32));
}
return 0;
}
static int
restore_ia32_fpxstate (struct task_struct *tsk, struct ia32_user_fxsr_struct *save)
{
struct switch_stack *swp;
struct pt_regs *ptp;
int i, tos;
unsigned int fsrlo, fsrhi, num32;
int mxcsr;
unsigned long num64;
unsigned long num128[2];
if (!access_ok(VERIFY_READ, save, sizeof(*save)))
return(-EFAULT);
__get_user(num32, (unsigned int *)&save->cwd);
tsk->thread.fcr = (tsk->thread.fcr & (~0x1f3f)) | (num32 & 0x1f3f);
__get_user(fsrlo, (unsigned int *)&save->swd);
__get_user(fsrhi, (unsigned int *)&save->twd);
num32 = (fsrhi << 16) | fsrlo;
tsk->thread.fsr = (tsk->thread.fsr & (~0xffffffff)) | num32;
__get_user(num32, (unsigned int *)&save->fip);
tsk->thread.fir = (tsk->thread.fir & (~0xffffffff)) | num32;
__get_user(num32, (unsigned int *)&save->foo);
tsk->thread.fdr = (tsk->thread.fdr & (~0xffffffff)) | num32;
/*
* Stack frames start with 16-bytes of temp space
*/
swp = (struct switch_stack *)(tsk->thread.ksp + 16);
ptp = ia64_task_regs(tsk);
tos = (tsk->thread.fsr >> 11) & 7;
for (i = 0; i < 8; i++)
get_fpreg(i, (struct _fpxreg_ia32 *)&save->st_space[4*i], ptp, swp, tos);
__get_user(mxcsr, (unsigned int *)&save->mxcsr);
num64 = mxcsr & 0xff10;
tsk->thread.fcr = (tsk->thread.fcr & (~0xff1000000000)) | (num64<<32);
num64 = mxcsr & 0x3f;
tsk->thread.fsr = (tsk->thread.fsr & (~0x3f00000000)) | (num64<<32);
for (i = 0; i < 8; i++) {
copy_from_user(num128, &save->xmm_space[0] + 4*i, sizeof(struct _xmmreg_ia32));
memcpy(&(swp->f16) + i*2, &(num128[0]), sizeof(unsigned long));
memcpy(&(swp->f17) + i*2, &(num128[1]), sizeof(unsigned long));
}
return 0;
}
extern asmlinkage long sys_ptrace (long, pid_t, unsigned long, unsigned long, long, long, long,
......@@ -3060,11 +3155,19 @@ sys32_ptrace (int request, pid_t pid, unsigned int addr, unsigned int data,
break;
case IA32_PTRACE_GETFPREGS:
ret = save_ia32_fpstate(child, (struct _fpstate_ia32 *) A(data));
ret = save_ia32_fpstate(child, (struct ia32_user_i387_struct *) A(data));
break;
case IA32_PTRACE_GETFPXREGS:
ret = save_ia32_fpxstate(child, (struct ia32_user_fxsr_struct *) A(data));
break;
case IA32_PTRACE_SETFPREGS:
ret = restore_ia32_fpstate(child, (struct _fpstate_ia32 *) A(data));
ret = restore_ia32_fpstate(child, (struct ia32_user_i387_struct *) A(data));
break;
case IA32_PTRACE_SETFPXREGS:
ret = restore_ia32_fpxstate(child, (struct ia32_user_fxsr_struct *) A(data));
break;
case PTRACE_SYSCALL: /* continue, stop after next syscall */
......@@ -3700,6 +3803,37 @@ sys32_brk (unsigned int brk)
return ret;
}
/*
* Exactly like fs/open.c:sys_open(), except that it doesn't set the O_LARGEFILE flag.
*/
asmlinkage long
sys32_open (const char * filename, int flags, int mode)
{
char * tmp;
int fd, error;
tmp = getname(filename);
fd = PTR_ERR(tmp);
if (!IS_ERR(tmp)) {
fd = get_unused_fd();
if (fd >= 0) {
struct file *f = filp_open(tmp, flags, mode);
error = PTR_ERR(f);
if (IS_ERR(f))
goto out_error;
fd_install(fd, f);
}
out:
putname(tmp);
}
return fd;
out_error:
put_unused_fd(fd);
fd = error;
goto out;
}
#ifdef NOTYET /* UNTESTED FOR IA64 FROM HERE DOWN */
struct ncp_mount_data32 {
......
arch/ia64/kernel/efi.c
View file @ cc2b9554
......@@ -306,7 +306,7 @@ efi_memmap_walk (efi_freemem_callback_t callback, void *arg)
u64 start;
u64 end;
} prev, curr;
void *efi_map_start, *efi_map_end, *p, *q;
void *efi_map_start, *efi_map_end, *p, *q, *r;
efi_memory_desc_t *md, *check_md;
u64 efi_desc_size, start, end, granule_addr, first_non_wb_addr = 0;
......@@ -351,11 +351,10 @@ efi_memmap_walk (efi_freemem_callback_t callback, void *arg)
if (!(first_non_wb_addr > granule_addr))
continue; /* couldn't find enough contiguous memory */
}
/* BUG_ON((md->phys_addr >> IA64_GRANULE_SHIFT) < first_non_wb_addr); */
trim_top(md, first_non_wb_addr);
for (r = p; r < q; r += efi_desc_size)
trim_top(r, first_non_wb_addr);
}
if (is_available_memory(md)) {
if (md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) > mem_limit) {
......
arch/ia64/kernel/entry.S
View file @ cc2b9554
......@@ -1160,7 +1160,7 @@ sys_call_table:
data8 sys_mlock
data8 sys_mlockall
data8 sys_mprotect // 1155
data8 sys_mremap
data8 ia64_mremap
data8 sys_msync
data8 sys_munlock
data8 sys_munlockall
......
arch/ia64/kernel/fw-emu.c
View file @ cc2b9554
......@@ -20,7 +20,13 @@
#define MB (1024*1024UL)
#define NUM_MEM_DESCS 3
#define SIMPLE_MEMMAP 1
#if SIMPLE_MEMMAP
# define NUM_MEM_DESCS 4
#else
# define NUM_MEM_DESCS 16
#endif
static char fw_mem[( sizeof(struct ia64_boot_param)
+ sizeof(efi_system_table_t)
......@@ -379,6 +385,17 @@ sys_fw_init (const char *args, int arglen)
struct ia64_boot_param *bp;
unsigned char checksum = 0;
char *cp, *cmd_line;
int i = 0;
# define MAKE_MD(typ, attr, start, end) \
do { \
md = efi_memmap + i++; \
md->type = typ; \
md->pad = 0; \
md->phys_addr = start; \
md->virt_addr = 0; \
md->num_pages = (end - start) >> 12; \
md->attribute = attr; \
} while (0)
memset(fw_mem, 0, sizeof(fw_mem));
......@@ -464,47 +481,29 @@ sys_fw_init (const char *args, int arglen)
sal_systab->checksum = -checksum;
#if SIMPLE_MEMMAP
/* simulate free memory at physical address zero */
md = &efi_memmap[0];
md->type = EFI_BOOT_SERVICES_DATA;
md->pad = 0;
md->phys_addr = 0*MB;
md->virt_addr = 0;
md->num_pages = (1*MB) >> 12; /* 1MB (in 4KB pages) */
md->attribute = EFI_MEMORY_WB;
/* fill in a memory descriptor: */
md = &efi_memmap[1];
md->type = EFI_CONVENTIONAL_MEMORY;
md->pad = 0;
md->phys_addr = 2*MB;
md->virt_addr = 0;
md->num_pages = (128*MB) >> 12; /* 128MB (in 4KB pages) */
md->attribute = EFI_MEMORY_WB;
/* descriptor for firmware emulator: */
md = &efi_memmap[2];
md->type = EFI_PAL_CODE;
md->pad = 0;
md->phys_addr = 1*MB;
md->virt_addr = 1*MB;
md->num_pages = (1*MB) >> 12; /* 1MB (in 4KB pages) */
md->attribute = EFI_MEMORY_WB;
#if 0
/*
* XXX bootmem is broken for now... (remember to NUM_MEM_DESCS
* if you re-enable this!)
*/
/* descriptor for high memory (>4GB): */
md = &efi_memmap[3];
md->type = EFI_CONVENTIONAL_MEMORY;
md->pad = 0;
md->phys_addr = 4096*MB;
md->virt_addr = 0;
md->num_pages = (32*MB) >> 12; /* 32MB (in 4KB pages) */
md->attribute = EFI_MEMORY_WB;
MAKE_MD(EFI_BOOT_SERVICES_DATA, EFI_MEMORY_WB, 0*MB, 1*MB);
MAKE_MD(EFI_PAL_CODE, EFI_MEMORY_WB, 1*MB, 2*MB);
MAKE_MD(EFI_CONVENTIONAL_MEMORY, EFI_MEMORY_WB, 2*MB, 130*MB);
MAKE_MD(EFI_CONVENTIONAL_MEMORY, EFI_MEMORY_WB, 4096*MB, 4128*MB);
#else
MAKE_MD( 4, 0x9, 0x0000000000000000, 0x0000000000001000);
MAKE_MD( 7, 0x9, 0x0000000000001000, 0x000000000008a000);
MAKE_MD( 4, 0x9, 0x000000000008a000, 0x00000000000a0000);
MAKE_MD( 5, 0x8000000000000009, 0x00000000000c0000, 0x0000000000100000);
MAKE_MD( 7, 0x9, 0x0000000000100000, 0x0000000004400000);
MAKE_MD( 2, 0x9, 0x0000000004400000, 0x0000000004be5000);
MAKE_MD( 7, 0x9, 0x0000000004be5000, 0x000000007f77e000);
MAKE_MD( 6, 0x8000000000000009, 0x000000007f77e000, 0x000000007fb94000);
MAKE_MD( 6, 0x8000000000000009, 0x000000007fb94000, 0x000000007fb95000);
MAKE_MD( 6, 0x8000000000000009, 0x000000007fb95000, 0x000000007fc00000);
MAKE_MD(13, 0x8000000000000009, 0x000000007fc00000, 0x000000007fc3a000);
MAKE_MD( 7, 0x9, 0x000000007fc3a000, 0x000000007fea0000);
MAKE_MD( 5, 0x8000000000000009, 0x000000007fea0000, 0x000000007fea8000);
MAKE_MD( 7, 0x9, 0x000000007fea8000, 0x000000007feab000);
MAKE_MD( 5, 0x8000000000000009, 0x000000007feab000, 0x000000007ffff000);
MAKE_MD( 7, 0x9, 0x00000000ff400000, 0x0000000104000000);
#endif
bp->efi_systab = __pa(&fw_mem);
......
arch/ia64/kernel/ia64_ksyms.c
View file @ cc2b9554
......@@ -86,7 +86,7 @@ EXPORT_SYMBOL(cpu_online_map);
EXPORT_SYMBOL(ia64_cpu_to_sapicid);
#else /* !CONFIG_SMP */
EXPORT_SYMBOL(__flush_tlb_all);
EXPORT_SYMBOL(local_flush_tlb_all);
#endif /* !CONFIG_SMP */
......
arch/ia64/kernel/mca.c
View file @ cc2b9554
......@@ -69,10 +69,10 @@ u64 ia64_mca_stackframe[32];
u64 ia64_mca_bspstore[1024];
u64 ia64_init_stack[KERNEL_STACK_SIZE] __attribute__((aligned(16)));
u64 ia64_mca_sal_data_area[1356];
u64 ia64_mca_min_state_save_info;
u64 ia64_tlb_functional;
u64 ia64_os_mca_recovery_successful;
/* TODO: need to assign min-state structure to UC memory */
u64 ia64_mca_min_state_save_info[MIN_STATE_AREA_SIZE] __attribute__((aligned(512)));
static void ia64_mca_wakeup_ipi_wait(void);
static void ia64_mca_wakeup(int cpu);
static void ia64_mca_wakeup_all(void);
......@@ -116,7 +116,7 @@ static struct irqaction mca_cpe_irqaction = {
* Outputs : platform error status
*/
int
ia64_mca_log_sal_error_record(int sal_info_type)
ia64_mca_log_sal_error_record(int sal_info_type, int called_from_init)
{
int platform_err = 0;
......@@ -131,7 +131,10 @@ ia64_mca_log_sal_error_record(int sal_info_type)
*/
platform_err = ia64_log_print(sal_info_type, (prfunc_t)printk);
ia64_sal_clear_state_info(sal_info_type);
/* temporary: only clear SAL logs on hardware-corrected errors
or if we're logging an error after an MCA-initiated reboot */
if ((sal_info_type > 1) || (called_from_init))
ia64_sal_clear_state_info(sal_info_type);
return platform_err;
}
......@@ -152,7 +155,7 @@ ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs)
IA64_MCA_DEBUG("ia64_mca_cpe_int_handler: received interrupt. vector = %#x\n", cpe_irq);
/* Get the CMC error record and log it */
ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE);
ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE, 0);
}
/*
......@@ -199,13 +202,15 @@ ia64_mca_init_platform (void)
*
* Outputs : None
*/
void
int
ia64_mca_check_errors (void)
{
/*
* If there is an MCA error record pending, get it and log it.
*/
ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA);
ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA, 1);
return 0;
}
device_initcall(ia64_mca_check_errors);
......@@ -237,49 +242,26 @@ ia64_mca_register_cpev (int cpev)
#endif /* PLATFORM_MCA_HANDLERS */
static char *min_state_labels[] = {
"nat",
"r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8",
"r9", "r10","r11", "r12","r13","r14", "r15",
"b0r16","b0r17", "b0r18", "b0r19", "b0r20",
"b0r21", "b0r22","b0r23", "b0r24", "b0r25",
"b0r26", "b0r27", "b0r28","b0r29", "b0r30", "b0r31",
"r16", "r17", "r18","r19", "r20", "r21","r22",
"r23", "r24","r25", "r26", "r27","r28", "r29", "r30","r31",
"preds", "br0", "rsc",
"iip", "ipsr", "ifs",
"xip", "xpsr", "xfs"
};
int ia64_pmss_dump_bank0=0; /* dump bank 0 ? */
/*
* routine to process and prepare to dump min_state_save
* information for debugging purposes.
*
*/
void
ia64_process_min_state_save (pal_min_state_area_t *pmss, struct pt_regs *ptregs)
ia64_process_min_state_save (pal_min_state_area_t *pmss)
{
int i, max=57;
u64 *tpmss_ptr=(u64 *)pmss;
int i, max = MIN_STATE_AREA_SIZE;
u64 *tpmss_ptr = (u64 *)pmss;
u64 *return_min_state_ptr = ia64_mca_min_state_save_info;
/* dump out the min_state_area information */
for (i=0;i<max;i++) {
if(!ia64_pmss_dump_bank0) {
if(strncmp("B0",min_state_labels[i],2)==0) {
tpmss_ptr++; /* skip to next entry */
continue;
}
}
printk("%5s=0x%16.16lx ",min_state_labels[i],*tpmss_ptr++);
/* copy min-state register info for eventual return to PAL */
*return_min_state_ptr++ = *tpmss_ptr;
if (((i+1)%3)==0 || ((!strcmp("GR16",min_state_labels[i]))
&& !ia64_pmss_dump_bank0))
printk("\n");
tpmss_ptr++; /* skip to next entry */
}
}
......@@ -525,19 +507,17 @@ ia64_mca_init(void)
ia64_log_init(SAL_INFO_TYPE_CMC);
ia64_log_init(SAL_INFO_TYPE_CPE);
/* Zero the min state save info */
ia64_mca_min_state_save_info = 0;
#if defined(MCA_TEST)
mca_test();
#endif /* #if defined(MCA_TEST) */
printk("Mca related initialization done\n");
#if 0 // Too early in initialization -- error log is lost
/* commented out because this is done elsewhere */
#if 0
/* Do post-failure MCA error logging */
ia64_mca_check_errors();
#endif // Too early in initialization -- error log is lost
#endif
}
/*
......@@ -632,7 +612,6 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *ptregs)
int cpu = 0;
/* Mask all interrupts */
#warning XXX fix me: this used to be: save_and_cli(flags);
local_irq_save(flags);
#ifdef CONFIG_SMP
......@@ -709,8 +688,8 @@ ia64_return_to_sal_check(void)
ia64_os_to_sal_handoff_state.imots_context = IA64_MCA_SAME_CONTEXT;
/* Register pointer to new min state values */
/* NOTE: need to do something with this during recovery phase */
ia64_os_to_sal_handoff_state.imots_new_min_state = &ia64_mca_min_state_save_info;
ia64_os_to_sal_handoff_state.imots_new_min_state =
ia64_mca_min_state_save_info;
}
/*
......@@ -735,7 +714,7 @@ ia64_mca_ucmc_handler(void)
int platform_err = 0;
/* Get the MCA error record and log it */
platform_err = ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA);
platform_err = ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA, 0);
/*
* Do Platform-specific mca error handling if required.
......@@ -775,7 +754,7 @@ ia64_mca_cmc_int_handler(int cmc_irq, void *arg, struct pt_regs *ptregs)
cmc_irq, smp_processor_id());
/* Get the CMC error record and log it */
ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC);
ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC, 0);
}
/*
......@@ -845,8 +824,7 @@ ia64_init_handler (struct pt_regs *regs)
plog_ptr=(ia64_err_rec_t *)IA64_LOG_CURR_BUFFER(SAL_INFO_TYPE_INIT);
proc_ptr = &plog_ptr->proc_err;
ia64_process_min_state_save(&proc_ptr->processor_static_info.min_state_area,
regs);
ia64_process_min_state_save(&proc_ptr->processor_static_info.min_state_area);
/* Clear the INIT SAL logs now that they have been saved in the OS buffer */
ia64_sal_clear_state_info(SAL_INFO_TYPE_INIT);
......@@ -1677,6 +1655,9 @@ ia64_log_proc_dev_err_info_print (sal_log_processor_info_t *slpi,
if (slpi->valid.psi_static_struct) {
spsi = (sal_processor_static_info_t *)p_data;
/* copy interrupted context PAL min-state info */
ia64_process_min_state_save(&spsi->min_state_area);
/* Print branch register contents if valid */
if (spsi->valid.br)
ia64_log_processor_regs_print(spsi->br, 8, "Branch", "br",
......
arch/ia64/kernel/smp.c
View file @ cc2b9554
......@@ -206,8 +206,20 @@ smp_send_reschedule_all (void)
void
smp_flush_tlb_all (void)
{
smp_call_function((void (*)(void *))__flush_tlb_all, 0, 1, 1);
__flush_tlb_all();
smp_call_function((void (*)(void *))local_flush_tlb_all, 0, 1, 1);
local_flush_tlb_all();
}
void
smp_flush_tlb_mm (struct mm_struct *mm)
{
local_flush_tlb_mm(mm);
/* this happens for the common case of a single-threaded fork(): */
if (likely(mm == current->active_mm && atomic_read(&mm->mm_users) == 1))
return;
smp_call_function((void (*)(void *))local_flush_tlb_mm, mm, 1, 1);
}
/*
......
arch/ia64/kernel/sys_ia64.c
View file @ cc2b9554
......@@ -317,6 +317,29 @@ sys_free_hugepages (unsigned long addr)
#endif /* !CONFIG_HUGETLB_PAGE */
asmlinkage unsigned long
ia64_mremap (unsigned long addr, unsigned long old_len, unsigned long new_len, unsigned long flags,
unsigned long new_addr)
{
extern unsigned long do_mremap (unsigned long addr,
unsigned long old_len,
unsigned long new_len,
unsigned long flags,
unsigned long new_addr);
down_write(&current->mm->mmap_sem);
{
addr = do_mremap(addr, old_len, new_len, flags, new_addr);
}
up_write(&current->mm->mmap_sem);
if (IS_ERR((void *) addr))
return addr;
force_successful_syscall_return();
return addr;
}
asmlinkage long
sys_vm86 (long arg0, long arg1, long arg2, long arg3)
{
......
arch/ia64/mm/tlb.c
View file @ cc2b9554
......@@ -84,7 +84,7 @@ wrap_mmu_context (struct mm_struct *mm)
for (i = 0; i < NR_CPUS; ++i)
if (i != smp_processor_id())
per_cpu(ia64_need_tlb_flush, i) = 1;
__flush_tlb_all();
local_flush_tlb_all();
}
void
......@@ -108,7 +108,7 @@ ia64_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbi
}
void
__flush_tlb_all (void)
local_flush_tlb_all (void)
{
unsigned long i, j, flags, count0, count1, stride0, stride1, addr;
......@@ -194,5 +194,5 @@ ia64_tlb_init (void)
local_cpu_data->ptce_stride[0] = ptce_info.stride[0];
local_cpu_data->ptce_stride[1] = ptce_info.stride[1];
__flush_tlb_all(); /* nuke left overs from bootstrapping... */
local_flush_tlb_all(); /* nuke left overs from bootstrapping... */
}
arch/ia64/pci/pci.c
View file @ cc2b9554
......@@ -44,10 +44,6 @@
#define DBG(x...)
#endif
#ifdef CONFIG_IA64_MCA
extern void ia64_mca_check_errors( void );
#endif
struct pci_fixup pcibios_fixups[1];
/*
......
arch/ia64/sn/configs/sn1/defconfig-bigsur-mp deleted 100644 → 0
View file @ 467578b9
This diff is collapsed.
arch/ia64/sn/configs/sn1/defconfig-bigsur-sp deleted 100644 → 0
View file @ 467578b9
This diff is collapsed.
arch/ia64/sn/configs/sn1/defconfig-dig-mp deleted 100644 → 0
View file @ 467578b9
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# General setup
#
CONFIG_IA64=y
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SBUS is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ACPI=y
CONFIG_ACPI_EFI=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_KERNEL_CONFIG=y
CONFIG_ITANIUM=y
# CONFIG_MCKINLEY is not set
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_SGI_SN1 is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_IA64_BRL_EMU=y
CONFIG_ITANIUM_BSTEP_SPECIFIC=y
CONFIG_IA64_L1_CACHE_SHIFT=6
# CONFIG_NUMA is not set
# CONFIG_IA64_MCA is not set
CONFIG_PM=y
CONFIG_IA64_HAVE_SYNCRONIZED_ITC=y
# CONFIG_DEVFS_FS is not set
CONFIG_KCORE_ELF=y
CONFIG_SMP=y
# CONFIG_IA32_SUPPORT is not set
# CONFIG_PERFMON is not set
# CONFIG_IA64_PALINFO is not set
# CONFIG_EFI_VARS is not set
# CONFIG_NET is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_BUSMGR is not set
# CONFIG_ACPI_SYS is not set
# CONFIG_ACPI_CPU is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_EC is not set
# CONFIG_ACPI_CMBATT is not set
# CONFIG_ACPI_THERMAL is not set
CONFIG_PCI=y
# CONFIG_PCI_NAMES is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
#
# Alternate 1394 support
#
# CONFIG_X1394 is not set
#
# Alternate SCSI support
#
# CONFIG_XSCSI is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
#
# Input core support is needed for gameports
#
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_EFI_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
# CONFIG_RAMFS is not set
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_SUPPORT is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_SMB_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# USB Controllers
#
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# USB Human Interface Devices (HID)
#
#
# Input core support is needed for USB HID
#
#
# USB Imaging devices
#
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
#
# Networking support is needed for USB Networking device support
#
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_RIO500 is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_IA64_PRINT_HAZARDS=y
# CONFIG_DISABLE_VHPT is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_IA64_EARLY_PRINTK=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
# CONFIG_KDB is not set
# CONFIG_KDB_MODULES is not set
# CONFIG_KALLSYMS is not set
arch/ia64/sn/configs/sn1/defconfig-dig-sp deleted 100644 → 0
View file @ 467578b9
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# General setup
#
CONFIG_IA64=y
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SBUS is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ACPI=y
CONFIG_ACPI_EFI=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_KERNEL_CONFIG=y
CONFIG_ITANIUM=y
# CONFIG_MCKINLEY is not set
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_SGI_SN1 is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_IA64_BRL_EMU=y
CONFIG_ITANIUM_BSTEP_SPECIFIC=y
CONFIG_IA64_L1_CACHE_SHIFT=6
# CONFIG_NUMA is not set
# CONFIG_IA64_MCA is not set
CONFIG_PM=y
CONFIG_IA64_HAVE_SYNCRONIZED_ITC=y
# CONFIG_DEVFS_FS is not set
CONFIG_KCORE_ELF=y
# CONFIG_SMP is not set
# CONFIG_IA32_SUPPORT is not set
# CONFIG_PERFMON is not set
# CONFIG_IA64_PALINFO is not set
# CONFIG_EFI_VARS is not set
# CONFIG_NET is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_BUSMGR is not set
# CONFIG_ACPI_SYS is not set
# CONFIG_ACPI_CPU is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_EC is not set
# CONFIG_ACPI_CMBATT is not set
# CONFIG_ACPI_THERMAL is not set
CONFIG_PCI=y
# CONFIG_PCI_NAMES is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
#
# Alternate 1394 support
#
# CONFIG_X1394 is not set
#
# Alternate SCSI support
#
# CONFIG_XSCSI is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
#
# Input core support is needed for gameports
#
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_EFI_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
# CONFIG_RAMFS is not set
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_SUPPORT is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_SMB_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# USB Controllers
#
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# USB Human Interface Devices (HID)
#
#
# Input core support is needed for USB HID
#
#
# USB Imaging devices
#
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
#
# Networking support is needed for USB Networking device support
#
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_RIO500 is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_IA64_PRINT_HAZARDS=y
# CONFIG_DISABLE_VHPT is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_IA64_EARLY_PRINTK=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
# CONFIG_KDB is not set
# CONFIG_KDB_MODULES is not set
# CONFIG_KALLSYMS is not set
arch/ia64/sn/configs/sn1/defconfig-generic-mp deleted 100644 → 0
View file @ 467578b9
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# General setup
#
CONFIG_IA64=y
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SBUS is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ACPI=y
CONFIG_ACPI_EFI=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_KERNEL_CONFIG=y
CONFIG_ITANIUM=y
# CONFIG_MCKINLEY is not set
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_SGI_SN1 is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_IA64_BRL_EMU=y
CONFIG_ITANIUM_BSTEP_SPECIFIC=y
CONFIG_IA64_L1_CACHE_SHIFT=6
CONFIG_KCORE_ELF=y
CONFIG_SMP=y
# CONFIG_IA32_SUPPORT is not set
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
# CONFIG_EFI_VARS is not set
# CONFIG_NET is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_BUSMGR is not set
# CONFIG_ACPI_SYS is not set
# CONFIG_ACPI_CPU is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_EC is not set
# CONFIG_ACPI_CMBATT is not set
# CONFIG_ACPI_THERMAL is not set
CONFIG_PCI=y
# CONFIG_PCI_NAMES is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
#
# Alternate 1394 support
#
# CONFIG_X1394 is not set
#
# Alternate SCSI support
#
# CONFIG_XSCSI is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
#
# Input core support is needed for gameports
#
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_EFI_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
# CONFIG_RAMFS is not set
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_SUPPORT is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_SMB_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# USB Controllers
#
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# USB Human Interface Devices (HID)
#
#
# Input core support is needed for USB HID
#
#
# USB Imaging devices
#
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
#
# Networking support is needed for USB Networking device support
#
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_RIO500 is not set
#
# Simulated drivers
#
# CONFIG_SIMETH is not set
# CONFIG_SIM_SERIAL is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_IA64_PRINT_HAZARDS=y
# CONFIG_DISABLE_VHPT is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_IA64_EARLY_PRINTK=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
# CONFIG_KDB is not set
# CONFIG_KDB_MODULES is not set
# CONFIG_KALLSYMS is not set
arch/ia64/sn/configs/sn1/defconfig-generic-sp deleted 100644 → 0
View file @ 467578b9
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# General setup
#
CONFIG_IA64=y
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SBUS is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ACPI=y
CONFIG_ACPI_EFI=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_KERNEL_CONFIG=y
CONFIG_ITANIUM=y
# CONFIG_MCKINLEY is not set
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_IA64_SGI_SN1 is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_IA64_BRL_EMU=y
CONFIG_ITANIUM_BSTEP_SPECIFIC=y
CONFIG_IA64_L1_CACHE_SHIFT=6
CONFIG_KCORE_ELF=y
# CONFIG_SMP is not set
# CONFIG_IA32_SUPPORT is not set
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
# CONFIG_EFI_VARS is not set
# CONFIG_NET is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_BUSMGR is not set
# CONFIG_ACPI_SYS is not set
# CONFIG_ACPI_CPU is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_EC is not set
# CONFIG_ACPI_CMBATT is not set
# CONFIG_ACPI_THERMAL is not set
CONFIG_PCI=y
# CONFIG_PCI_NAMES is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
#
# Alternate 1394 support
#
# CONFIG_X1394 is not set
#
# Alternate SCSI support
#
# CONFIG_XSCSI is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
#
# Input core support is needed for gameports
#
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_EFI_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
# CONFIG_RAMFS is not set
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_SUPPORT is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_SMB_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# USB Controllers
#
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# USB Human Interface Devices (HID)
#
#
# Input core support is needed for USB HID
#
#
# USB Imaging devices
#
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
#
# Networking support is needed for USB Networking device support
#
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_RIO500 is not set
#
# Simulated drivers
#
# CONFIG_SIMETH is not set
# CONFIG_SIM_SERIAL is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_IA64_PRINT_HAZARDS=y
# CONFIG_DISABLE_VHPT is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_IA64_EARLY_PRINTK=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
# CONFIG_KDB is not set
# CONFIG_KDB_MODULES is not set
# CONFIG_KALLSYMS is not set
arch/ia64/sn/configs/sn1/defconfig-hp-sp deleted 100644 → 0
View file @ 467578b9
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# General setup
#
CONFIG_IA64=y
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SBUS is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ITANIUM=y
# CONFIG_MCKINLEY is not set
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
CONFIG_IA64_HP_SIM=y
# CONFIG_IA64_SGI_SN1 is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_IA64_BRL_EMU=y
CONFIG_ITANIUM_BSTEP_SPECIFIC=y
CONFIG_IA64_L1_CACHE_SHIFT=6
CONFIG_KCORE_ELF=y
# CONFIG_SMP is not set
# CONFIG_IA32_SUPPORT is not set
# CONFIG_PERFMON is not set
# CONFIG_IA64_PALINFO is not set
# CONFIG_EFI_VARS is not set
CONFIG_NET=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_NETLINK is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Alternate 1394 support
#
# CONFIG_X1394 is not set
#
# Alternate SCSI support
#
# CONFIG_XSCSI is not set
#
# SCSI support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_DEBUG_QUEUES is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
#
# Input core support is needed for gameports
#
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_EFI_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
# CONFIG_RAMFS is not set
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_SUPPORT is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Simulated drivers
#
CONFIG_SIMETH=y
CONFIG_SIM_SERIAL=y
CONFIG_SCSI_SIM=y
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_IA64_PRINT_HAZARDS=y
# CONFIG_DISABLE_VHPT is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_IA64_EARLY_PRINTK=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
# CONFIG_KDB is not set
# CONFIG_KDB_MODULES is not set
# CONFIG_KALLSYMS is not set
arch/ia64/sn/configs/sn1/defconfig-prom-medusa deleted 100644 → 0
View file @ 467578b9
This diff is collapsed.
arch/ia64/sn/configs/sn1/defconfig-sn1-mp deleted 100644 → 0
View file @ 467578b9
This diff is collapsed.
arch/ia64/sn/configs/sn1/defconfig-sn1-mp-modules deleted 100644 → 0
View file @ 467578b9
This diff is collapsed.
arch/ia64/sn/configs/sn1/defconfig-sn1-mp-syn1-0 deleted 100644 → 0
View file @ 467578b9
This diff is collapsed.
arch/ia64/sn/configs/sn1/defconfig-sn1-sp deleted 100644 → 0
View file @ 467578b9
This diff is collapsed.
arch/ia64/sn/configs/sn2/defconfig-dig-numa deleted 100644 → 0
View file @ 467578b9
This diff is collapsed.
arch/ia64/sn/configs/sn2/defconfig-sn2-dig-mp deleted 100644 → 0
View file @ 467578b9
This diff is collapsed.
arch/ia64/sn/configs/sn2/defconfig-sn2-dig-sp deleted 100644 → 0
View file @ 467578b9
This diff is collapsed.
arch/ia64/sn/configs/sn2/defconfig-sn2-mp deleted 100644 → 0
View file @ 467578b9
This diff is collapsed.
arch/ia64/sn/configs/sn2/defconfig-sn2-mp-modules deleted 100644 → 0
View file @ 467578b9
This diff is collapsed.
arch/ia64/sn/configs/sn2/defconfig-sn2-prom-medusa deleted 100644 → 0
View file @ 467578b9
This diff is collapsed.
arch/ia64/sn/configs/sn2/defconfig-sn2-sp deleted 100644 → 0
View file @ 467578b9
This diff is collapsed.
include/asm-ia64/acpi.h
View file @ cc2b9554
......@@ -56,7 +56,7 @@
#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \
do { \
__asm__ volatile ("1: ld4 r29=%1\n" \
__asm__ volatile ("1: ld4 r29=[%1]\n" \
";;\n" \
"mov ar.ccv=r29\n" \
"mov r2=r29\n" \
......@@ -68,7 +68,7 @@
";;\n" \
"add r29=r29,r30\n" \
";;\n" \
"cmpxchg4.acq r30=%1,r29,ar.ccv\n" \
"cmpxchg4.acq r30=[%1],r29,ar.ccv\n" \
";;\n" \
"cmp.eq p6,p7=r2,r30\n" \
"(p7) br.dpnt.few 1b\n" \
......@@ -76,24 +76,24 @@
";;\n" \
"(p8) mov %0=-1\n" \
"(p9) mov %0=r0\n" \
:"=r"(Acq):"m"(GLptr):"r2","r29","r30","memory"); \
:"=r"(Acq):"r"(GLptr):"r2","r29","r30","memory"); \
} while (0)
#define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq) \
do { \
__asm__ volatile ("1: ld4 r29=%1\n" \
__asm__ volatile ("1: ld4 r29=[%1]\n" \
";;\n" \
"mov ar.ccv=r29\n" \
"mov r2=r29\n" \
"and r29=-4,r29\n" \
";;\n" \
"cmpxchg4.acq r30=%1,r29,ar.ccv\n" \
"cmpxchg4.acq r30=[%1],r29,ar.ccv\n" \
";;\n" \
"cmp.eq p6,p7=r2,r30\n" \
"(p7) br.dpnt.few 1b\n" \
"and %0=1,r2\n" \
";;\n" \
:"=r"(Acq):"m"(GLptr):"r2","r29","r30","memory"); \
:"=r"(Acq):"r"(GLptr):"r2","r29","r30","memory"); \
} while (0)
const char *acpi_get_sysname (void);
......
include/asm-ia64/ia32.h
View file @ cc2b9554
This diff is collapsed.
include/asm-ia64/mca.h
View file @ cc2b9554
......@@ -103,6 +103,8 @@ enum {
IA64_MCA_NEW_CONTEXT = -1 /* SAL to return to new context */
};
#define MIN_STATE_AREA_SIZE 57
typedef struct ia64_mca_os_to_sal_state_s {
u64 imots_os_status; /* OS status to SAL as to what happened
* with the MCA handling.
......@@ -133,7 +135,7 @@ extern void ia64_mca_cmc_int_handler(int,void *,struct pt_regs *);
extern void ia64_mca_cpe_int_handler(int,void *,struct pt_regs *);
extern int ia64_log_print(int,prfunc_t);
extern void ia64_mca_cmc_vector_setup(void);
extern void ia64_mca_check_errors( void );
extern int ia64_mca_check_errors(void);
extern u64 ia64_log_get(int, prfunc_t);
#define PLATFORM_CALL(fn, args) printk("Platform call TBD\n")
......
include/asm-ia64/mca_asm.h
View file @ cc2b9554
This diff is collapsed.
include/asm-ia64/mmu_context.h
View file @ cc2b9554
This diff is collapsed.
include/asm-ia64/system.h
View file @ cc2b9554
This diff is collapsed.
include/asm-ia64/tlbflush.h
View file @ cc2b9554
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7