Commit cc7969a1 authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

ARM: mach-mx35_3ds: Remove camera support

Since commit c93cc614 ("[media] staging/media: remove deprecated
mx3 driver") the mx3 camera driver has been removed, so remove the camera
support from the board file as well.
Signed-off-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 9eba4b8e
......@@ -41,12 +41,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
#include <video/platform_lcd.h>
#include <media/soc_camera.h>
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx35.h"
......@@ -233,83 +230,10 @@ static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = {
MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
/* CSI */
MX35_PAD_TX1__IPU_CSI_D_6,
MX35_PAD_TX0__IPU_CSI_D_7,
MX35_PAD_CSI_D8__IPU_CSI_D_8,
MX35_PAD_CSI_D9__IPU_CSI_D_9,
MX35_PAD_CSI_D10__IPU_CSI_D_10,
MX35_PAD_CSI_D11__IPU_CSI_D_11,
MX35_PAD_CSI_D12__IPU_CSI_D_12,
MX35_PAD_CSI_D13__IPU_CSI_D_13,
MX35_PAD_CSI_D14__IPU_CSI_D_14,
MX35_PAD_CSI_D15__IPU_CSI_D_15,
MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC,
MX35_PAD_CSI_MCLK__IPU_CSI_MCLK,
MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK,
MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC,
/*PMIC IRQ*/
MX35_PAD_GPIO2_0__GPIO2_0,
};
/*
* Camera support
*/
static phys_addr_t mx3_camera_base __initdata;
#define MX35_3DS_CAMERA_BUF_SIZE SZ_8M
static const struct mx3_camera_pdata mx35_3ds_camera_pdata __initconst = {
.flags = MX3_CAMERA_DATAWIDTH_8,
.mclk_10khz = 2000,
};
static int __init imx35_3ds_init_camera(void)
{
int dma, ret = -ENOMEM;
struct platform_device *pdev =
imx35_alloc_mx3_camera(&mx35_3ds_camera_pdata);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
if (!mx3_camera_base)
goto err;
dma = dma_declare_coherent_memory(&pdev->dev,
mx3_camera_base, mx3_camera_base,
MX35_3DS_CAMERA_BUF_SIZE,
DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
if (!(dma & DMA_MEMORY_MAP))
goto err;
ret = platform_device_add(pdev);
if (ret)
err:
platform_device_put(pdev);
return ret;
}
static struct i2c_board_info mx35_3ds_i2c_camera = {
I2C_BOARD_INFO("ov2640", 0x30),
};
static struct soc_camera_link iclink_ov2640 = {
.bus_id = 0,
.board_info = &mx35_3ds_i2c_camera,
.i2c_adapter_id = 0,
.power = NULL,
};
static struct platform_device mx35_3ds_ov2640 = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &iclink_ov2640,
},
};
static struct regulator_consumer_supply sw1_consumers[] = {
{
.supply = "cpu_vcc",
......@@ -321,10 +245,6 @@ static struct regulator_consumer_supply vcam_consumers[] = {
REGULATOR_SUPPLY("VDDA", "0-000a"),
};
static struct regulator_consumer_supply vaudio_consumers[] = {
REGULATOR_SUPPLY("cmos_vio", "soc-camera-pdrv.0"),
};
static struct regulator_init_data sw1_init = {
.constraints = {
.name = "SW1",
......@@ -405,18 +325,6 @@ static struct regulator_init_data vvideo_init = {
}
};
static struct regulator_init_data vaudio_init = {
.constraints = {
.name = "VAUDIO",
.min_uV = 2300000,
.max_uV = 3000000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.boot_on = 1
},
.num_consumer_supplies = ARRAY_SIZE(vaudio_consumers),
.consumer_supplies = vaudio_consumers,
};
static struct regulator_init_data vcam_init = {
.constraints = {
.name = "VCAM",
......@@ -460,7 +368,6 @@ static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = {
{ .id = MC13892_VDIG, .init_data = &vdig_init },
{ .id = MC13892_VUSB2, .init_data = &vusb2_init },
{ .id = MC13892_VVIDEO, .init_data = &vvideo_init },
{ .id = MC13892_VAUDIO, .init_data = &vaudio_init },
{ .id = MC13892_VCAM, .init_data = &vcam_init },
{ .id = MC13892_VGEN1, .init_data = &vgen1_init },
{ .id = MC13892_VGEN2, .init_data = &vgen2_init },
......@@ -583,8 +490,6 @@ static void __init mx35_3ds_init(void)
0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds));
imx35_add_ipu_core();
platform_device_register(&mx35_3ds_ov2640);
imx35_3ds_init_camera();
}
static void __init mx35_3ds_late_init(void)
......@@ -607,13 +512,6 @@ static void __init mx35pdk_timer_init(void)
mx35_clocks_init();
}
static void __init mx35_3ds_reserve(void)
{
/* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
mx3_camera_base = arm_memblock_steal(MX35_3DS_CAMERA_BUF_SIZE,
MX35_3DS_CAMERA_BUF_SIZE);
}
MACHINE_START(MX35_3DS, "Freescale MX35PDK")
/* Maintainer: Freescale Semiconductor, Inc */
.atag_offset = 0x100,
......@@ -623,6 +521,5 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
.init_time = mx35pdk_timer_init,
.init_machine = mx35_3ds_init,
.init_late = mx35_3ds_late_init,
.reserve = mx35_3ds_reserve,
.restart = mxc_restart,
MACHINE_END
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment