Commit ccf2dc51 authored by Guenter Roeck's avatar Guenter Roeck

hwmon: (ltc2978) Add support for LTM4675

LTM2975 is a dual 9A or single 18A μModule regulator.
It is register compatible with LTM4676.
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent e04d1ce9
......@@ -47,6 +47,10 @@ Supported chips:
Prefix: 'ltm2987'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltm2987
* Linear Technology LTM4675
Prefix: 'ltm4675'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltm4675
* Linear Technology LTM4676
Prefix: 'ltm4676'
Addresses scanned: -
......@@ -70,6 +74,7 @@ LTC3883 is a single phase step-down DC/DC controller.
LTM2987 is a 16-channel Power System Manager with two LTC2977 plus
additional components on a single die. The chip is instantiated and reported
as two separate chips on two different I2C bus addresses.
LTM4675 is a dual 9A or single 18A μModule regulator
LTM4676 is a dual 13A or single 26A uModule regulator.
......@@ -117,7 +122,8 @@ in[N]_label "vout[1-8]".
LTC2974, LTC2975: N=2-5
LTC2977, LTC2980, LTM2987: N=2-9
LTC2978: N=2-9
LTC3880, LTC3882, LTC23886 LTC3887, LTM4676: N=2-3
LTC3880, LTC3882, LTC23886 LTC3887, LTM4675, LTM4676:
N=2-3
LTC3883: N=2
in[N]_input Measured output voltage.
in[N]_min Minimum output voltage.
......@@ -139,9 +145,9 @@ temp[N]_input Measured temperature.
On LTC2977, LTC2980, LTC2978, and LTM2987, only one
temperature measurement is supported and reports
the chip temperature.
On LTC3880, LTC3882, LTC3887, and LTM4676, temp1 and
temp2 report external temperatures, and temp3 reports
the chip temperature.
On LTC3880, LTC3882, LTC3887, LTM4675, and LTM4676,
temp1 and temp2 report external temperatures, and temp3
reports the chip temperature.
On LTC3883, temp1 reports an external temperature,
and temp2 reports the chip temperature.
temp[N]_min Mimimum temperature. LTC2974, LCT2977, LTM2980, LTC2978,
......@@ -172,12 +178,13 @@ power[N]_label "pout[1-4]".
LTC2974, LTC2975: N=1-4
LTC2977, LTC2980, LTM2987: Not supported
LTC2978: Not supported
LTC3880, LTC3882, LTC3886, LTC3887, LTM4676: N=1-2
LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
N=1-2
LTC3883: N=2
power[N]_input Measured output power.
curr1_label "iin". LTC3880, LTC3883, LTC3886, LTC3887, and LTM4676
only.
curr1_label "iin". LTC3880, LTC3883, LTC3886, LTC3887, LTM4675,
and LTM4676 only.
curr1_input Measured input current.
curr1_max Maximum input current.
curr1_max_alarm Input current high alarm.
......@@ -188,7 +195,8 @@ curr[N]_label "iout[1-4]".
LTC2974, LTC2975: N=1-4
LTC2977, LTC2980, LTM2987: not supported
LTC2978: not supported
LTC3880, LTC3882, LTC3886, LTC3887, LTM4676: N=2-3
LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
N=2-3
LTC3883: N=2
curr[N]_input Measured output current.
curr[N]_max Maximum output current.
......
......@@ -53,7 +53,7 @@ config SENSORS_LTC2978
help
If you say yes here you get hardware monitoring support for Linear
Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC2980, LTC3880,
LTC3883, LTC3886, LTC3887, LTCM2987, and LTM4676.
LTC3883, LTC3886, LTC3887, LTCM2987, LTM4675, and LTM4676.
This driver can also be built as a module. If so, the module will
be called ltc2978.
......
......@@ -28,7 +28,7 @@
#include "pmbus.h"
enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
ltc3883, ltc3886, ltc3887, ltm2987, ltm4676 };
ltc3883, ltc3886, ltc3887, ltm2987, ltm4675, ltm4676 };
/* Common for all chips */
#define LTC2978_MFR_VOUT_PEAK 0xdd
......@@ -46,7 +46,7 @@ enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
#define LTC2974_MFR_IOUT_PEAK 0xd7
#define LTC2974_MFR_IOUT_MIN 0xd8
/* LTC3880, LTC3882, LTC3883, LTC3887, and LTM4676 */
/* LTC3880, LTC3882, LTC3883, LTC3887, LTM4675, and LTM4676 */
#define LTC3880_MFR_IOUT_PEAK 0xd7
#define LTC3880_MFR_CLEAR_PEAKS 0xe3
#define LTC3880_MFR_TEMPERATURE2_PEAK 0xf4
......@@ -77,6 +77,7 @@ enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
#define LTC3887_ID 0x4700
#define LTM2987_ID_A 0x8010 /* A/B for two die IDs */
#define LTM2987_ID_B 0x8020
#define LTM4675_ID 0x47a0
#define LTM4676_ID_REV1 0x4400
#define LTM4676_ID_REV2 0x4480
#define LTM4676A_ID 0x47e0
......@@ -509,6 +510,7 @@ static const struct i2c_device_id ltc2978_id[] = {
{"ltc3886", ltc3886},
{"ltc3887", ltc3887},
{"ltm2987", ltm2987},
{"ltm4675", ltm4675},
{"ltm4676", ltm4676},
{}
};
......@@ -581,6 +583,8 @@ static int ltc2978_get_id(struct i2c_client *client)
return ltc3887;
else if (chip_id == LTM2987_ID_A || chip_id == LTM2987_ID_B)
return ltm2987;
else if (chip_id == LTM4675_ID)
return ltm4675;
else if (chip_id == LTM4676_ID_REV1 || chip_id == LTM4676_ID_REV2 ||
chip_id == LTM4676A_ID)
return ltm4676;
......@@ -678,6 +682,7 @@ static int ltc2978_probe(struct i2c_client *client,
break;
case ltc3880:
case ltc3887:
case ltm4675:
case ltm4676:
data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
info->read_word_data = ltc3880_read_word_data;
......@@ -763,6 +768,7 @@ static const struct of_device_id ltc2978_of_match[] = {
{ .compatible = "lltc,ltc3886" },
{ .compatible = "lltc,ltc3887" },
{ .compatible = "lltc,ltm2987" },
{ .compatible = "lltc,ltm4675" },
{ .compatible = "lltc,ltm4676" },
{ }
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment