platform/chrome: cros_ec: Import Type C host commands

Import the EC_CMD_TYPEC_STATUS and EC_CMD_TYPEC_DISCOVERY Chrome OS EC
host commands from the EC code base [1].

These commands can be used by the application processor to query Power
Delivery (PD) discovery information concerning connected Type C
peripherals.

Also add the EC_FEATURE_TYPEC_CMD feature flag, which is used to
determine whether these commands are supported by the EC.

[1]:
https://chromium.googlesource.com/chromiumos/platform/ec/+/refs/heads/master/include/ec_commands.hSigned-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201029222738.482366-5-pmalani@chromium.org

include/linux/platform_data/cros_ec_commands.h

@@ -1284,6 +1284,8 @@ enum ec_feature_code {
 	EC_FEATURE_SCP = 39,
 	/* The MCU is an Integrated Sensor Hub */
 	EC_FEATURE_ISH = 40,
+	/* New TCPMv2 TYPEC_ prefaced commands supported */
+	EC_FEATURE_TYPEC_CMD = 41,
 };
 
 #define EC_FEATURE_MASK_0(event_code) BIT(event_code % 32)
@@ -5528,6 +5530,159 @@ struct ec_response_regulator_get_voltage {
 	uint32_t voltage_mv;
 } __ec_align4;
 
+/*
+ * Gather all discovery information for the given port and partner type.
+ *
+ * Note that if discovery has not yet completed, only the currently completed
+ * responses will be filled in.   If the discovery data structures are changed
+ * in the process of the command running, BUSY will be returned.
+ *
+ * VDO field sizes are set to the maximum possible number of VDOs a VDM may
+ * contain, while the number of SVIDs here is selected to fit within the PROTO2
+ * maximum parameter size.
+ */
+#define EC_CMD_TYPEC_DISCOVERY 0x0131
+
+enum typec_partner_type {
+	TYPEC_PARTNER_SOP = 0,
+	TYPEC_PARTNER_SOP_PRIME = 1,
+};
+
+struct ec_params_typec_discovery {
+	uint8_t port;
+	uint8_t partner_type; /* enum typec_partner_type */
+} __ec_align1;
+
+struct svid_mode_info {
+	uint16_t svid;
+	uint16_t mode_count;  /* Number of modes partner sent */
+	uint32_t mode_vdo[6]; /* Max VDOs allowed after VDM header is 6 */
+};
+
+struct ec_response_typec_discovery {
+	uint8_t identity_count;    /* Number of identity VDOs partner sent */
+	uint8_t svid_count;	   /* Number of SVIDs partner sent */
+	uint16_t reserved;
+	uint32_t discovery_vdo[6]; /* Max VDOs allowed after VDM header is 6 */
+	struct svid_mode_info svids[0];
+} __ec_align1;
+
+/*
+ * Gather all status information for a port.
+ *
+ * Note: this covers many of the return fields from the deprecated
+ * EC_CMD_USB_PD_CONTROL command, except those that are redundant with the
+ * discovery data.  The "enum pd_cc_states" is defined with the deprecated
+ * EC_CMD_USB_PD_CONTROL command.
+ *
+ * This also combines in the EC_CMD_USB_PD_MUX_INFO flags.
+ */
+#define EC_CMD_TYPEC_STATUS 0x0133
+
+/*
+ * Power role.
+ *
+ * Note this is also used for PD header creation, and values align to those in
+ * the Power Delivery Specification Revision 3.0 (See
+ * 6.2.1.1.4 Port Power Role).
+ */
+enum pd_power_role {
+	PD_ROLE_SINK = 0,
+	PD_ROLE_SOURCE = 1
+};
+
+/*
+ * Data role.
+ *
+ * Note this is also used for PD header creation, and the first two values
+ * align to those in the Power Delivery Specification Revision 3.0 (See
+ * 6.2.1.1.6 Port Data Role).
+ */
+enum pd_data_role {
+	PD_ROLE_UFP = 0,
+	PD_ROLE_DFP = 1,
+	PD_ROLE_DISCONNECTED = 2,
+};
+
+enum pd_vconn_role {
+	PD_ROLE_VCONN_OFF = 0,
+	PD_ROLE_VCONN_SRC = 1,
+};
+
+/*
+ * Note: BIT(0) may be used to determine whether the polarity is CC1 or CC2,
+ * regardless of whether a debug accessory is connected.
+ */
+enum tcpc_cc_polarity {
+	/*
+	 * _CCx: is used to indicate the polarity while not connected to
+	 * a Debug Accessory.  Only one CC line will assert a resistor and
+	 * the other will be open.
+	 */
+	POLARITY_CC1 = 0,
+	POLARITY_CC2 = 1,
+
+	/*
+	 * _CCx_DTS is used to indicate the polarity while connected to a
+	 * SRC Debug Accessory.  Assert resistors on both lines.
+	 */
+	POLARITY_CC1_DTS = 2,
+	POLARITY_CC2_DTS = 3,
+
+	/*
+	 * The current TCPC code relies on these specific POLARITY values.
+	 * Adding in a check to verify if the list grows for any reason
+	 * that this will give a hint that other places need to be
+	 * adjusted.
+	 */
+	POLARITY_COUNT
+};
+
+#define PD_STATUS_EVENT_SOP_DISC_DONE		BIT(0)
+#define PD_STATUS_EVENT_SOP_PRIME_DISC_DONE	BIT(1)
+
+struct ec_params_typec_status {
+	uint8_t port;
+} __ec_align1;
+
+struct ec_response_typec_status {
+	uint8_t pd_enabled;		/* PD communication enabled - bool */
+	uint8_t dev_connected;		/* Device connected - bool */
+	uint8_t sop_connected;		/* Device is SOP PD capable - bool */
+	uint8_t source_cap_count;	/* Number of Source Cap PDOs */
+
+	uint8_t power_role;		/* enum pd_power_role */
+	uint8_t data_role;		/* enum pd_data_role */
+	uint8_t vconn_role;		/* enum pd_vconn_role */
+	uint8_t sink_cap_count;		/* Number of Sink Cap PDOs */
+
+	uint8_t polarity;		/* enum tcpc_cc_polarity */
+	uint8_t cc_state;		/* enum pd_cc_states */
+	uint8_t dp_pin;			/* DP pin mode (MODE_DP_IN_[A-E]) */
+	uint8_t mux_state;		/* USB_PD_MUX* - encoded mux state */
+
+	char tc_state[32];		/* TC state name */
+
+	uint32_t events;		/* PD_STATUS_EVENT bitmask */
+
+	/*
+	 * BCD PD revisions for partners
+	 *
+	 * The format has the PD major reversion in the upper nibble, and PD
+	 * minor version in the next nibble.  Following two nibbles are
+	 * currently 0.
+	 * ex. PD 3.2 would map to 0x3200
+	 *
+	 * PD major/minor will be 0 if no PD device is connected.
+	 */
+	uint16_t sop_revision;
+	uint16_t sop_prime_revision;
+
+	uint32_t source_cap_pdos[7];	/* Max 7 PDOs can be present */
+
+	uint32_t sink_cap_pdos[7];	/* Max 7 PDOs can be present */
+} __ec_align1;
+
 /*****************************************************************************/
 /* The command range 0x200-0x2FF is reserved for Rotor. */