Commit cdbcd330 authored by Martin Kelly's avatar Martin Kelly Committed by Greg Kroah-Hartman

Staging/bcm: Fix whitespace/comments in Ioctl.h

Cleanup whitespace and comments in Ioctl.h in a few ways:
- > 80 character cleanup
- Comment clarification
- More consistent vertical alignment
Signed-off-by: default avatarMartin Kelly <martkell@amazon.com>
Reviewed-by: default avatarMatthias Beyer <mail@beyermatthias.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 33b443e4
......@@ -87,9 +87,9 @@ struct bcm_user_thread_req {
#define IOCTL_BCM_FLASH2X_SECTION_WRITE _IOW(BCM_IOCTL, 0x866, int)
#define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP _IOR(BCM_IOCTL, 0x867, int)
#define IOCTL_BCM_SET_ACTIVE_SECTION _IOW(BCM_IOCTL, 0x868, int)
#define IOCTL_BCM_IDENTIFY_ACTIVE_SECTION _IO(BCM_IOCTL, 0x869)
#define IOCTL_BCM_IDENTIFY_ACTIVE_SECTION _IO(BCM_IOCTL, 0x869)
#define IOCTL_BCM_COPY_SECTION _IOW(BCM_IOCTL, 0x870, int)
#define IOCTL_BCM_GET_FLASH_CS_INFO _IOR(BCM_IOCTL, 0x871, int)
#define IOCTL_BCM_GET_FLASH_CS_INFO _IOR(BCM_IOCTL, 0x871, int)
#define IOCTL_BCM_SELECT_DSD _IOW(BCM_IOCTL, 0x872, int)
#define IOCTL_BCM_NVM_RAW_READ _IOR(BCM_IOCTL, 0x875, int)
#define IOCTL_BCM_CNTRLMSG_MASK _IOW(BCM_IOCTL, 0x874, int)
......@@ -130,7 +130,7 @@ struct bcm_bulk_wrm_buffer {
};
enum bcm_flash2x_section_val {
NO_SECTION_VAL = 0, /* no section is chosen when absolute offset is given for RD/WR */
NO_SECTION_VAL = 0, /* no section chosen when absolute offset is given for RD/WR */
ISO_IMAGE1,
ISO_IMAGE2,
DSD0,
......@@ -152,11 +152,11 @@ enum bcm_flash2x_section_val {
* Structure used for READ/WRITE Flash Map2.x
*/
struct bcm_flash2x_readwrite {
enum bcm_flash2x_section_val Section; /* which section has to be read/written */
u32 offset; /* Offset within Section. */
u32 numOfBytes; /* NOB from the offset */
enum bcm_flash2x_section_val Section; /* section to be read/written */
u32 offset; /* offset within section. */
u32 numOfBytes; /* number of bytes from the offset */
u32 bVerify;
void __user *pDataBuff; /* Buffer for reading/writing */
void __user *pDataBuff; /* buffer for reading/writing */
};
/*
......@@ -207,20 +207,20 @@ struct bcm_time_elapsed {
};
enum {
WIMAX_IDX = 0, /* To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
HOST_IDX, /* To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
WIMAX_IDX = 0, /* To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
HOST_IDX, /* To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
MAX_IDX
};
struct bcm_gpio_multi_info {
unsigned int uiGPIOCommand; /* 1 for set and 0 for get */
unsigned int uiGPIOMask; /* set the correspondig bit to 1 to access GPIO */
unsigned int uiGPIOValue; /* 0 or 1; value to be set when command is 1. */
unsigned int uiGPIOMask; /* set the corresponding bit to 1 to access GPIO */
unsigned int uiGPIOValue; /* 0 or 1; value to be set when command is 1. */
} __packed;
struct bcm_gpio_multi_mode {
unsigned int uiGPIOMode; /* 1 for OUT mode, 0 for IN mode */
unsigned int uiGPIOMask; /* GPIO mask to set mode */
unsigned int uiGPIOMode; /* 1 for OUT mode, 0 for IN mode */
unsigned int uiGPIOMask; /* GPIO mask to set mode */
} __packed;
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment