staging: mt7621-dts: move some properties into root port child nodes

After a review of the bindings 'clocks', 'resets' and 'phys' must
be moved into root port child nodes. Hence, move all of them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210607120153.24989-5-sergio.paracuellos@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/mt7621-dts/mt7621.dtsi

@@ -500,15 +500,6 @@ pcie: pcie@1e140000 {
 
 		status = "disabled";
 
-		resets = <&rstctrl 24>, <&rstctrl 25>, <&rstctrl 26>;
-		reset-names = "pcie0", "pcie1", "pcie2";
-		clocks = <&sysc MT7621_CLK_PCIE0>,
-			 <&sysc MT7621_CLK_PCIE1>,
-			 <&sysc MT7621_CLK_PCIE2>;
-		clock-names = "pcie0", "pcie1", "pcie2";
-		phys = <&pcie0_phy 1>, <&pcie2_phy 0>;
-		phy-names = "pcie-phy0", "pcie-phy2";
-
 		reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 
 		pcie@0,0 {
@@ -519,6 +510,10 @@ pcie@0,0 {
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rstctrl 24>;
+			clocks = <&sysc MT7621_CLK_PCIE0>;
+			phys = <&pcie0_phy 1>;
+			phy-names = "pcie-phy0";
 			ranges;
 		};
 
@@ -530,6 +525,10 @@ pcie@1,0 {
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rstctrl 25>;
+			clocks = <&sysc MT7621_CLK_PCIE1>;
+			phys = <&pcie0_phy 1>;
+			phy-names = "pcie-phy1";
 			ranges;
 		};
 
@@ -541,6 +540,10 @@ pcie@2,0 {
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rstctrl 26>;
+			clocks = <&sysc MT7621_CLK_PCIE2>;
+			phys = <&pcie2_phy 0>;
+			phy-names = "pcie-phy2";
 			ranges;
 		};
 	};